- 14 Jul, 2019 40 commits
-
-
Vishnu DASA authored
commit 1c2eb5b2 upstream. The VMCI handle array has an integer overflow in vmci_handle_arr_append_entry when it tries to expand the array. This can be triggered from a guest, since the doorbell link hypercall doesn't impose a limit on the number of doorbell handles that a VM can create in the hypervisor, and these handles are stored in a handle array. In this change, we introduce a mandatory max capacity for handle arrays/lists to avoid excessive memory usage. Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Lamparter authored
commit feb09b29 upstream. This patch follows Alan Stern's recent patch: "p54: Fix race between disconnect and firmware loading" that overhauled carl9170 buggy firmware loading and driver unbinding procedures. Since the carl9170 code was adapted from p54 it uses the same functions and is likely to have the same problem, but it's just that the syzbot hasn't reproduce them (yet). a summary from the changes (copied from the p54 patch): * Call usb_driver_release_interface() rather than device_release_driver(). * Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. * During the firmware loading process, take a reference to the USB interface instead of the USB device. * Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). and * Make sure to prevent use-after-free bugs by explicitly setting the driver context to NULL after signaling the completion. Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Fabrice Gasnier authored
commit 7685010f upstream. Add missing vdda-supply, analog power supply, to STM32 ADC. When vdda is an independent supply, it needs to be properly turned on or off to supply the ADC. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Fixes: 1add6988 ("iio: adc: Add support for STM32 ADC core"). Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Todd Kjos authored
commit bb4a2e48 upstream. The buffer copy functions assumed the caller would ensure correct alignment and that the memory to be copied was completely within the binder buffer. There have been a few cases discovered by syzkallar where a malformed transaction created by a user could violated the assumptions and resulted in a BUG_ON. The fix is to remove the BUG_ON and always return the error to be handled appropriately by the caller. Acked-by:
Martijn Coenen <maco@android.com> Reported-by: syzbot+3ae18325f96190606754@syzkaller.appspotmail.com Fixes: bde4a19f ("binder: use userspace pointer as base of buffer space") Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Todd Kjos authored
commit 1909a671 upstream. syzkallar found a 32-byte memory leak in a rarely executed error case. The transaction complete work item was not freed if put_user() failed when writing the BR_TRANSACTION_COMPLETE to the user command buffer. Fixed by freeing it before put_user() is called. Reported-by: syzbot+182ce46596c3f2e1eb24@syzkaller.appspotmail.com Signed-off-by:
-
Nick Desaulniers authored
commit e9e08a07 upstream. With CONFIG_LKDTM=y and make OBJCOPY=llvm-objcopy, llvm-objcopy errors: llvm-objcopy: error: --set-section-flags=.text conflicts with --rename-section=.text=.rodata Rather than support setting flags then renaming sections vs renaming then setting flags, it's simpler to just change both at the same time via --rename-section. Adding the load flag is required for GNU objcopy to mark .rodata Type as PROGBITS after the rename. This can be verified with: $ readelf -S drivers/misc/lkdtm/rodata_objcopy.o ... Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 1] .rodata PROGBITS 0000000000000000 00000040 0000000000000004 0000000000000000 A 0 0 4 ... Which shows that .text is now renamed .rodata, the alloc flag A is set, the type is PROGBITS, and the section is not flagged as writeable W. Cc: stable@vger.kernel.org Link: https://sourceware.org/bugzilla/show_bug.cgi?id=24554 Link: https://github.com/ClangBuiltLinux/linux/issues/448Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Suggested-by:
Alan Modra <amodra@gmail.com> Suggested-by:
Jordan Rupprect <rupprecht@google.com> Suggested-by:
Kees Cook <keescook@chromium.org> Acked-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Sebastian Parschauer authored
commit 4c129549 upstream. The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this Alienware branded Primax mouse as well. Daniel Schepler (@dschepler) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Sergio Paracuellos authored
commit 0ae0cf50 upstream. Add missing parenthesis to PCIE_FTS_NUM_LO macro to do the same it was being done in original code. Fixes: a4b2eb91 ("staging: mt7621-pci: rewrite RC FTS configuration") Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ian Abbott authored
commit 7379e6ba upstream. The interrupt handler `pci230_interrupt()` causes a null pointer dereference for a PCI260 card. There is no analog output subdevice for a PCI260. The `dev->write_subdev` subdevice pointer and therefore the `s_ao` subdevice pointer variable will be `NULL` for a PCI260. The following call near the end of the interrupt handler results in the null pointer dereference for a PCI260: comedi_handle_events(dev, s_ao); Fix it by only calling the above function if `s_ao` is valid. Note that the other uses of `s_ao` in the calls `pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev, s_ao);` will never be reached for a PCI260, so they are safe. Fixes: 39064f23 ("staging: comedi: amplc_pci230: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ajay Singh authored
commit 6419f818 upstream. For the error path in wilc_wlan_initialize(), the resources are not cleanup in the correct order. Reverted the previous changes and use the correct order to free during error condition. Fixes: b46d6882 ("staging: wilc1000: remove COMPLEMENT_BOOT") Cc: <stable@vger.kernel.org> Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Ian Abbott authored
commit b8336be6 upstream. The interrupt handler `dt282x_interrupt()` causes a null pointer dereference for those supported boards that have no analog output support. For these boards, `dev->write_subdev` will be `NULL` and therefore the `s_ao` subdevice pointer variable will be `NULL`. In that case, the following call near the end of the interrupt handler results in a null pointer dereference: comedi_handle_events(dev, s_ao); Fix it by only calling the above function if `s_ao` is valid. (There are other uses of `s_ao` by the interrupt handler that may or may not be reached depending on values of hardware registers. Trust that they are reliable for now.) Note: commit 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()") propagates an earlier error from commit f21c74fa ("staging: comedi: dt282x: use cfc_handle_events()"). Fixes: 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
-
Christian Lamparter authored
commit 1645ab93 upstream. This patch fixes a crash that got introduced when the mentioned patch replaced the direct list_head access with skb_peek_tail(). When the device is starting up, there are no entries in the queue, so previously to "Use skb_peek_tail() instead..." the target_skb would end up as the tail and head pointer which then could be used by __skb_queue_after to fill the empty queue. With skb_peek_tail() in its place will instead just return NULL which then causes a crash in the __skb_queue_after(). | BUG: unable to handle kernel NULL pointer dereference at 000000 | #PF error: [normal kernel read fault] | PGD 0 P4D 0 | Oops: 0000 [#1] SMP PTI | CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: GO 5.1.0-rc7-wt+ #218 | Hardware name: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015 | Workqueue: events request_firmware_work_func | RIP: 0010:p54_tx_pending+0x10f/0x1b0 [p54common] | Code: 78 06 80 78 28 00 74 6d <48> 8b 07 49 89 7c 24 08 49 89 04 24 4 | RSP: 0018:ffffa81c81927d90 EFLAGS: 00010086 | RAX: ffff9bbaaf131048 RBX: 0000000000020670 RCX: 0000000000020264 | RDX: ffff9bbaa976d660 RSI: 0000000000000202 RDI: 0000000000000000 | RBP: ffff9bbaa976d620 R08: 00000000000006c0 R09: ffff9bbaa976d660 | R10: 0000000000000000 R11: ffffe8480dbc5900 R12: ffff9bbb45e87700 | R13: ffff9bbaa976d648 R14: ffff9bbaa976d674 R15: ffff9bbaaf131048 | FS: 0000000000000000(0000) GS:ffff9bbb5ec00000(0000) knlGS:00000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000000000000 CR3: 00000003695fc003 CR4: 00000000001606f0 | Call Trace: | p54_download_eeprom+0xbe/0x120 [p54common] | p54_read_eeprom+0x7f/0xc0 [p54common] | p54u_load_firmware_cb+0xe0/0x160 [p54usb] | request_firmware_work_func+0x42/0x80 | process_one_work+0x1f5/0x3f0 | worker_thread+0x28/0x3c0 Cc: stable@vger.kernel.org Fixes: e3554197 ("p54: Use skb_peek_tail() instead of direct head pointer accesses.") Signed-off-by:
-
Nikolaus Voss authored
commit 2681795b upstream. Writing 4CC commands with tps6598x_write_4cc() already has a pointer arg, don't reference it when using as arg to tps6598x_block_write(). Correcting this enforces the constness of the pointer to propagate to tps6598x_block_write(), so add the const qualifier there to avoid the warning. Fixes: 0a4c005b ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by:
Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Nikolaus Voss authored
commit 05da75fc upstream. Portinfo bit field is 3 bits wide, not 2 bits. This led to a wrong driver configuration for some tps6598x configurations. Fixes: 0a4c005b ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by:
-
Yoshihiro Shimoda authored
commit b2357839 upstream. The old commit 6e4b74e4 ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work(). To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However, the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()). For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue. This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen. Fixes: ab330cf3 ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Martin Blumenstingl authored
commit dfc4fdeb upstream. Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences. This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14. Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout. Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Kiruthika Varadarajan authored
commit d29fcf70 upstream. On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c ("usb ethernet gadget: split out network core") Cc: <stable@vger.kernel.org> Signed-off-by:
Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com> Signed-off-by:
-
Fei Yang authored
commit 4833a94e upstream. The following line of code in function ffs_epfile_io is trying to set flag io_data->use_sg in case buffer required is larger than one page. io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; However at this point of time the variable data_len has not been set to the proper buffer size yet. The consequence is that io_data->use_sg is always set regardless what buffer size really is, because the condition (data_len > PAGE_SIZE) is effectively an unsigned comparison between -EINVAL and PAGE_SIZE which would always result in TRUE. Fixes: 772a7a72 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by:
Fei Yang <fei.yang@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Alan Stern authored
commit 6e41e225 upstream. The syzbot fuzzer found a bug in the p54 USB wireless driver. The issue involves a race between disconnect and the firmware-loader callback routine, and it has several aspects. One big problem is that when the firmware can't be loaded, the callback routine tries to unbind the driver from the USB _device_ (by calling device_release_driver) instead of from the USB _interface_ to which it is actually bound (by calling usb_driver_release_interface). The race involves access to the private data structure. The driver's disconnect handler waits for a completion that is signalled by the firmware-loader callback routine. As soon as the completion is signalled, you have to assume that the private data structure may have been deallocated by the disconnect handler -- even if the firmware was loaded without errors. However, the callback routine does access the private data several times after that point. Another problem is that, in order to ensure that the USB device structure hasn't been freed when the callback routine runs, the driver takes a reference to it. This isn't good enough any more, because now that the callback routine calls usb_driver_release_interface, it has to ensure that the interface structure hasn't been freed. Finally, the driver takes an unnecessary reference to the USB device structure in the probe function and drops the reference in the disconnect handler. This extra reference doesn't accomplish anything, because the USB core already guarantees that a device structure won't be deallocated while a driver is still bound to any of its interfaces. To fix these problems, this patch makes the following changes: Call usb_driver_release_interface() rather than device_release_driver(). Don't signal the completion until after the important information has been copied out of the private data structure, and don't refer to the private data at all thereafter. Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. During the firmware loading process, take a reference to the USB interface instead of the USB device. Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). Signed-off-by:
-
Oliver Barta authored
commit 3f2640ed upstream. This reverts commit 2e9fe539. Reading LSR unconditionally but processing the error flags only if UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission error information on UARTs where the transmission error flags are cleared by a read of LSR. Information are lost in case an error is detected right before the read of LSR while processing e.g. an UART_IIR_THRI interrupt. Signed-off-by:
Oliver Barta <o.barta89@gmail.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 2e9fe539 ("serial: 8250: Don't service RX FIFO if interrupts are disabled") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jörgen Storvist authored
commit aed2a262 upstream. Added USB IDs for GosunCn ME3630 cellular module in RNDIS mode. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0601 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=b950269c C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andreas Fritiofson authored
commit f8377eff upstream. This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the second channel is available for use as a serial port. Signed-off-by:
Andreas Fritiofson <andreas.fritiofson@unjo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Brian Norris authored
commit 63d7ef36 upstream. Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b77 ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 685c9b77 upstream. Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that the source descriptor entries contain the enough size for each type and performs copying without checking the source size. This may lead to read over boundary. Fix this by putting the source size check in appropriate places. Signed-off-by:
-
Andy Lutomirski authored
commit d974ffcf upstream. The vsyscall=native feature is gone -- remove the docs. Fixes: 076ca272 ("x86/vsyscall/64: Drop "native" vsyscalls") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Tim Chen authored
commit 6e885594 upstream. Add documentation for Spectre vulnerability and the mitigation mechanisms: - Explain the problem and risks - Document the mitigation mechanisms - Document the command line controls - Document the sysfs files Co-developed-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Dianzhang Chen authored
commit 993773d1 upstream. The index to access the threads tls array is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability. The index can be controlled from: ptrace -> arch_ptrace -> do_get_thread_area. Fix this by sanitizing the user supplied index before using it to access the p->thread.tls_array. Signed-off-by:
Dianzhang Chen <dianzhangchen0@gmail.com> Signed-off-by:
-
Dianzhang Chen authored
commit 31a2fbb3 upstream. The index to access the threads ptrace_bps is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability. The index can be controlled from: ptrace -> arch_ptrace -> ptrace_get_debugreg. Fix this by sanitizing the user supplied index before using it access thread->ptrace_bps. Signed-off-by:
-
Song Liu authored
commit c952b35f upstream. bpf/btf write_* functions need ff->ph->env. With this missing, pipe-mode (perf record -o -) would crash like: Program terminated with signal SIGSEGV, Segmentation fault. This patch assign proper ph value to ff. Committer testing: (gdb) run record -o - Starting program: /root/bin/perf record -o - PERFILE2 <SNIP start of perf.data headers> Thread 1 "perf" received signal SIGSEGV, Segmentation fault. __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 126 memcpy(ff->buf + ff->offset, buf, size); (gdb) bt #0 __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 #1 do_write (ff=ff@entry=0x7fffffff8f80, buf=buf@entry=0x160, size=4) at util/header.c:137 #2 0x00000000004eddba in write_bpf_prog_info (ff=0x7fffffff8f80, evlist=<optimized out>) at util/header.c:912 #3 0x00000000004f69d7 in perf_event__synthesize_features (tool=tool@entry=0x97cc00 <record>, session=session@entry=0x7fffe9c6d010, evlist=0x7fffe9cae010, process=process@entry=0x4435d0 <process_synthesized_event>) at util/header.c:3695 #4 0x0000000000443c79 in record__synthesize (tail=tail@entry=false, rec=0x97cc00 <record>) at builtin-record.c:1214 #5 0x0000000000444ec9 in __cmd_record (rec=0x97cc00 <record>, argv=<optimized out>, argc=0) at builtin-record.c:1435 #6 cmd_record (argc=0, argv=<optimized out>) at builtin-record.c:2450 #7 0x00000000004ae3e9 in run_builtin (p=p@entry=0x98e058 <commands+216>, argc=argc@entry=3, argv=0x7fffffffd670) at perf.c:304 #8 0x000000000042eded in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:356 #9 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:400 #10 main (argc=3, argv=<optimized out>) at perf.c:522 (gdb) After the patch the SEGSEGV is gone. Reported-by:
David Carrillo Cisneros <davidca@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org # v5.1+ Fixes: 606f972b ("perf bpf: Save bpf_prog_info information as headers to perf.data") Link: http://lkml.kernel.org/r/20190620010453.4118689-1-songliubraving@fb.comSigned-off-by:
-
Adrian Hunter authored
commit 97860b48 upstream. Commit f08046cb ("perf thread-stack: Represent jmps to the start of a different symbol") had the side-effect of introducing more stack entries before return from kernel space. When user space is also traced, those entries are popped before entry to user space, but when user space is not traced, they get stuck at the bottom of the stack, making the stack grow progressively larger. Fix by detecting a return-from-kernel branch type, and popping kernel addresses from the stack then. Note, the problem and fix affect the exported Call Graph / Tree but not the callindent option used by "perf script --call-trace". Example: perf-with-kcore record example -e intel_pt//k -- ls perf-with-kcore script example --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py example.db branches calls ~/libexec/perf-core/scripts/python/exported-sql-viewer.py example.db Menu option: Reports -> Context-Sensitive Call Graph Before: (showing Call Path column only) Call Path
▶ perf ▼ ls ▼ 12111:12111▶ setup_new_exec▶ __task_pid_nr_ns▶ perf_event_pid_type▶ perf_event_comm_output▶ perf_iterate_ctx▶ perf_iterate_sb▶ perf_event_comm▶ __set_task_comm▶ load_elf_binary▶ search_binary_handler▶ __do_execve_file.isra.41▶ __x64_sys_execve▶ do_syscall_64 ▼ entry_SYSCALL_64_after_hwframe ▼ swapgs_restore_regs_and_return_to_usermode ▼ native_iret▶ error_entry▶ do_page_fault ▼ error_exit ▼ retint_user▶ prepare_exit_to_usermode ▼ native_iret▶ error_entry▶ do_page_fault ▼ error_exit ▼ retint_user▶ prepare_exit_to_usermode ▼ native_iret▶ error_entry▶ do_page_fault ▼ error_exit ▼ retint_user▶ prepare_exit_to_usermode▶ native_iret After: (showing Call Path column only) Call Path▶ perf ▼ ls ▼ 12111:12111▶ setup_new_exec▶ __task_pid_nr_ns▶ perf_event_pid_type▶ perf_event_comm_output▶ perf_iterate_ctx▶ perf_iterate_sb▶ perf_event_comm▶ __set_task_comm▶ load_elf_binary▶ search_binary_handler▶ __do_execve_file.isra.41▶ __x64_sys_execve▶ do_syscall_64▶ entry_SYSCALL_64_after_hwframe▶ page_fault ▼ entry_SYSCALL_64 ▼ do_syscall_64▶ __x64_sys_brk▶ __x64_sys_access▶ __x64_sys_openat▶ __x64_sys_newfstat▶ __x64_sys_mmap▶ __x64_sys_close▶ __x64_sys_read▶ __x64_sys_mprotect▶ __x64_sys_arch_prctl▶ __x64_sys_munmap▶ exit_to_usermode_loop▶ __x64_sys_set_tid_address▶ __x64_sys_set_robust_list▶ __x64_sys_rt_sigaction▶ __x64_sys_rt_sigprocmask▶ __x64_sys_prlimit64▶ __x64_sys_statfs▶ __x64_sys_ioctl▶ __x64_sys_getdents64▶ __x64_sys_write▶ __x64_sys_exit_group Committer notes: The first arg to the perf-with-kcore needs to be the same for the 'record' and 'script' lines, otherwise we'll record the perf.data file and kcore_dir/ files in one directory ('example') to then try to use it from the 'bep' directory, fix the instructions above it so that both use 'example'. Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Tested-by:
-
John Garry authored
commit 599ee18f upstream. In commit 292c34c1 ("perf pmu: Fix core PMU alias list for X86 platform"), we fixed the issue of CPU events being aliased to uncore events. Fix this same issue for ARM64, since the said commit left the (broken) behaviour untouched for ARM64. Signed-off-by:
John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Cc: stable@vger.kernel.org Fixes: 292c34c1 ("perf pmu: Fix core PMU alias list for X86 platform") Link: http://lkml.kernel.org/r/1560521283-73314-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Adrian Hunter authored
commit a2d8a158 upstream. Fix intel-pt documentation to reflect the change of itrace defaults for perf script. Signed-off-by:
-
Adrian Hunter authored
commit 355200e0 upstream. Commit 4eb06815 ("perf script: Make itrace script default to all calls") does not work for the case when '--itrace' only is used, because default_no_sample is not being passed. Example: Before: $ perf record -e intel_pt/cyc/u ls $ perf script --itrace > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt differ After: $ perf script --itrace > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt are identical Signed-off-by:
-
Adrian Hunter authored
commit 26f19c2e upstream. Commit 4eb06815 ("perf script: Make itrace script default to all calls") does not work because 'use_browser' is being used to determine whether to default to periodic sampling (i.e. better for perf report). The result is that nothing but CBR events display for perf script when no --itrace option is specified. Fix by using 'default_no_sample' and 'inject' instead. Example: Before: $ perf record -e intel_pt/cyc/u ls $ perf script > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt differ After: $ perf script > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt are identical Signed-off-by:
-
Douglas Anderson authored
commit dbc3117d upstream. In reboot tests on several devices we were seeing a "use after free" when slub_debug or KASAN was enabled. The kernel complained about: Unable to handle kernel paging request at virtual address 6b6b6c2b ...which is a classic sign of use after free under slub_debug. The stack crawl in kgdb looked like: 0 test_bit (addr=<optimized out>, nr=<optimized out>) 1 bfq_bfqq_busy (bfqq=<optimized out>) 2 bfq_select_queue (bfqd=<optimized out>) 3 __bfq_dispatch_request (hctx=<optimized out>) 4 bfq_dispatch_request (hctx=<optimized out>) 5 0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440) 6 0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440) 7 0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440) 8 0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>) 9 0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480) 10 0xc024cff4 in worker_thread (__worker=0xec6d4640) Digging in kgdb, it could be found that, though bfqq looked fine, bfqq->bic had been freed. Through further digging, I postulated that perhaps it is illegal to access a "bic" (AKA an "icq") after bfq_exit_icq() had been called because the "bic" can be freed at some point in time after this call is made. I confirmed that there certainly were cases where the exact crashing code path would access the "bic" after bfq_exit_icq() had been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and saw that the bic was 0x7 at the time of the crash. To understand a bit more about why this crash was fairly uncommon (I saw it only once in a few hundred reboots), you can see that much of the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't access the ->bic anymore. The only case it doesn't is if bfq_put_queue() sees a reference still held. However, even in the case when bfqq isn't freed, the crash is still rare. Why? I tracked what happened to the "bic" after the exit routine. It doesn't get freed right away. Rather, put_io_context_active() eventually called put_io_context() which queued up freeing on a workqueue. The freeing then actually happened later than that through call_rcu(). Despite all these delays, some extra debugging showed that all the hoops could be jumped through in time and the memory could be freed causing the original crash. Phew! To make a long story short, assuming it truly is illegal to access an icq after the "exit_icq" callback is finished, this patch is needed. Cc: stable@vger.kernel.org Reviewed-by:
Paolo Valente <paolo.valente@unimore.it> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vadim Sukhomlinov authored
commit db4d8cb9 upstream. TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling future TPM operations. TPM 1.2 behavior was different, future TPM operations weren't disabled, causing rare issues. This patch ensures that future TPM operations are disabled. Fixes: d1bd4a79 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.") Cc: stable@vger.kernel.org Signed-off-by:
Vadim Sukhomlinov <sukhomlinov@google.com> [dianders: resolved merge conflicts with mainline] Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Kees Cook authored
commit 782779b6 upstream. A "get random" may fail with a TPM error, but those codes were returned as-is to the caller, which assumed the result was the number of bytes that had been written to the target buffer, which could lead to a kernel heap memory exposure and over-read. This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as before. [ 18.092103] tpm tpm0: A TPM error (379) occurred attempting get random [ 18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)! Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989Reported-by:
Phil Baker <baker1tex@gmail.com> Reported-by:
Craig Robson <craig@zhatt.com> Fixes: 7aee9c52 ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure") Cc: Laura Abbott <labbott@redhat.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Tested-by:
Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by:
-
Kailang Yang authored
commit d07a9a4f upstream. Dell headset mode platform with ALC236. It doesn't recording after system resume from S3. S3 mode was deep. s2idle was not has this issue. S3 deep will cut of codec power. So, the register will back to default after resume back. This patch will solve this issue. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit ca95c7bf upstream. Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device. This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by:
Stefan Sauer <ensonic@hora-obscura.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit b09a2ab2 upstream. There was a typo at the lower frequency limit for a DVB-C card, causing the driver to fail while tuning channels at the VHF range. https://bugzilla.kernel.org/show_bug.cgi?id=202083 Fixes: f1b1eabf ("media: dvb: represent min/max/step/tolerance freqs in Hz") Reported-by:
Ari Kohtamäki <ari.kohtamaki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
