state_size and ops are in the wrong position.

Link: http://lkml.kernel.org/r/20190910021747.11216-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

List iteration takes more code than anything else which means embedded
list_head should be the first element of the structure.

Space savings:

	add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-18 (-18)
	Function                                     old     new   delta
	close_pdeo                                   228     227      -1
	proc_reg_release                              86      82      -4
	proc_entry_rundown                           143     139      -4
	proc_reg_open                                298     289      -9

Link: http://lkml.kernel.org/r/20191004234753.GB30246@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pointer to next '/' encodes length of path element and next start
position.  Subtraction and increment are redundant.

Link: http://lkml.kernel.org/r/20191004234521.GA30246@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently gluing PDE into global /proc tree is done under lock, but
changing ->nlink is not.  Additionally struct proc_dir_entry::nlink is
not atomic so updates can be lost.

Link: http://lkml.kernel.org/r/20190925202436.GA17388@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For hugely mapped thp, we use is_huge_zero_pmd() to check if it's zero
page or not.

We do fill ptes with my_zero_pfn() when we split zero thp pmd, but this
is not what we have in vm_normal_page_pmd() -- pmd_trans_huge_lock()
makes sure of it.

This is a trivial fix for /proc/pid/numa_maps, and AFAIK nobody
complains about it.

Gerald Schaefer asked:
: Maybe the description could also mention the symptom of this bug?
: I would assume that it affects anon/dirty accounting in gather_pte_stats(),
: for huge mappings, if zero page mappings are not correctly recognized.

I came across this while I was looking at the code, so I'm not aware of
any symptom.

Link: http://lkml.kernel.org/r/20191108192629.201556-1-yuzhao@google.comSigned-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use common names from vmstat array when possible.  This gives not much
difference in code size for now, but should help in keeping interfaces
consistent.

  add/remove: 0/2 grow/shrink: 2/0 up/down: 70/-72 (-2)
  Function                                     old     new   delta
  memory_stat_format                           984    1050     +66
  memcg_stat_show                              957     961      +4
  memcg1_event_names                            32       -     -32
  mem_cgroup_lru_names                          40       -     -40
  Total: Before=14485337, After=14485335, chg -0.00%

Link: http://lkml.kernel.org/r/157113012508.453.80391533767219371.stgit@buzzSigned-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Statistics in vmstat is combined from counters with different structure,
but names for them are merged into one array.

This patch adds trivial helpers to get name for each item:

  const char *zone_stat_name(enum zone_stat_item item);
  const char *numa_stat_name(enum numa_stat_item item);
  const char *node_stat_name(enum node_stat_item item);
  const char *writeback_stat_name(enum writeback_stat_item item);
  const char *vm_event_name(enum vm_event_item item);

Names for enum writeback_stat_item are folded in the middle of
vmstat_text so this patch moves declaration into header to calculate
offset of following items.

Also this patch reuses piece of node stat names for lru list names:

  const char *lru_list_name(enum lru_list lru);

This returns common lru list names: "inactive_anon", "active_anon",
"inactive_file", "active_file", "unevictable".

[khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items]
  Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz
  Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u
Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzzSigned-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Christian reported a warning like the following obtained during running
some KVM-related tests on s390:

    WARNING: CPU: 8 PID: 208 at lib/percpu-refcount.c:108 percpu_ref_exit+0x50/0x58
    Modules linked in: kvm(-) xt_CHECKSUM xt_MASQUERADE bonding xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_na>
    CPU: 8 PID: 208 Comm: kworker/8:1 Not tainted 5.2.0+ #66
    Hardware name: IBM 2964 NC9 712 (LPAR)
    Workqueue: events sysfs_slab_remove_workfn
    Krnl PSW : 0704e00180000000 0000001529746850 (percpu_ref_exit+0x50/0x58)
               R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
    Krnl GPRS: 00000000ffff8808 0000001529746740 000003f4e30e8e18 0036008100000000
               0000001f00000000 0035008100000000 0000001fb3573ab8 0000000000000000
               0000001fbdb6de00 0000000000000000 0000001529f01328 0000001fb3573b00
               0000001fbb27e000 0000001fbdb69300 000003e009263d00 000003e009263cd0
    Krnl Code: 0000001529746842: f0a0000407fe        srp        4(11,%r0),2046,0
               0000001529746848: 47000700            bc         0,1792
              #000000152974684c: a7f40001            brc        15,152974684e
              >0000001529746850: a7f4fff2            brc        15,1529746834
               0000001529746854: 0707                bcr        0,%r7
               0000001529746856: 0707                bcr        0,%r7
               0000001529746858: eb8ff0580024        stmg       %r8,%r15,88(%r15)
               000000152974685e: a738ffff            lhi        %r3,-1
    Call Trace:
    ([<000003e009263d00>] 0x3e009263d00)
     [<00000015293252ea>] slab_kmem_cache_release+0x3a/0x70
     [<0000001529b04882>] kobject_put+0xaa/0xe8
     [<000000152918cf28>] process_one_work+0x1e8/0x428
     [<000000152918d1b0>] worker_thread+0x48/0x460
     [<00000015291942c6>] kthread+0x126/0x160
     [<0000001529b22344>] ret_from_fork+0x28/0x30
     [<0000001529b2234c>] kernel_thread_starter+0x0/0x10
    Last Breaking-Event-Address:
     [<000000152974684c>] percpu_ref_exit+0x4c/0x58
    ---[ end trace b035e7da5788eb09 ]---

The problem occurs because kmem_cache_destroy() is called immediately
after deleting of a memcg, so it races with the memcg kmem_cache
deactivation.

flush_memcg_workqueue() at the beginning of kmem_cache_destroy() is
supposed to guarantee that all deactivation processes are finished, but
failed to do so.  It waits for an rcu grace period, after which all
children kmem_caches should be deactivated.  During the deactivation
percpu_ref_kill() is called for non root kmem_cache refcounters, but it
requires yet another rcu grace period to finish the transition to the
atomic (dead) state.

So in a rare case when not all children kmem_caches are destroyed at the
moment when the root kmem_cache is about to be gone, we need to wait
another rcu grace period before destroying the root kmem_cache.

This issue can be triggered only with dynamically created kmem_caches
which are used with memcg accounting.  In this case per-memcg child
kmem_caches are created.  They are deactivated from the cgroup removing
path.  If the destruction of the root kmem_cache is racing with the
removal of the cgroup (both are quite complicated multi-stage
processes), the described issue can occur.  The only known way to
trigger it in the real life, is to unload some kernel module which
creates a dedicated kmem_cache, used from different memory cgroups with
GFP_ACCOUNT flag.  If the unloading happens immediately after calling
rmdir on the corresponding cgroup, there is some chance to trigger the
issue.

Link: http://lkml.kernel.org/r/20191129025011.3076017-1-guro@fb.com
Fixes: f0a3a24b ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I hit the following compile error in arch/x86/

   mm/kasan/common.c: In function kasan_populate_vmalloc:
   mm/kasan/common.c:797:2: error: implicit declaration of function flush_cache_vmap; did you mean flush_rcu_work? [-Werror=implicit-function-declaration]
     flush_cache_vmap(shadow_start, shadow_end);
     ^~~~~~~~~~~~~~~~
     flush_rcu_work
   cc1: some warnings being treated as errors

Link: http://lkml.kernel.org/r/1575363013-43761-1-git-send-email-zhongjiang@huawei.com
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform changes from Benson Leung:
 "CrOS EC / MFD / IIO:

   - Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part
     of a series from Gwendal to refactor sensor code between MFD, CrOS
     EC, iio and input in order to add a new sensorhub driver and FIFO
     processing

  Wilco EC:

   - Add support for Dell's USB PowerShare policy control, keyboard
     backlight LED driver, and a new test_event file.

   - Fixes use after free in wilco_ec's telemetry driver.

  Misc:

   - bugfix in cros_usbpd_logger (missing destroy workqueue)"

* tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: wilco_ec: fix use after free issue
  platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub
  Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  platform/chrome: cros_ec: handle MKBP more events flag
  platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  platform/chrome: cros-ec: Record event timestamp in the hard irq
  mfd / platform / iio: cros_ec: Register sensor through sensorhub
  iio / platform: cros_ec: Add cros-ec-sensorhub driver
  mfd / platform: cros_ec: Add sensor_count and make check_features public
  platform/chrome: cros_ec: Put docs with the code
  platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove
  platform/chrome: cros_ec: Fix Kconfig indentation
  platform/chrome: wilco_ec: Add keyboard backlight LED support
  platform/chrome: wilco_ec: Add charging config driver
  platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control
  platform/chrome: wilco_ec: Add debugfs test_event file

Pull SPDX fix from Greg KH:
 "Here is a single SPDX fixup for 5.5-rc1

  It resolves an issue where we had missed a few .h files with the
  auto-tagging scripts because they had "GPL" text in strings within the
  file themselves. This single patch fixes up the issue and provides the
  proper SPDX tags at the top of them as needed.

  This patch has been in linux-next for many many weeks now with no
  reported issues"

* tag 'spdx-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  export,module: add SPDX GPL-2.0 license identifier to headers with no license

Pull tty/serial updates from Greg KH:
 "Here is the "big" tty and serial driver patches for 5.5-rc1.

  It's a bit later in the merge window than normal as I wanted to make
  sure some last-minute patches applied to it were all sane. They seem
  to be :)

  There's a lot of little stuff in here, for the tty core, and for lots
  of serial drivers:

   - reverts of uartlite serial driver patches that were wrong

   - msm-serial driver fixes

   - serial core updates and fixes

   - tty core fixes

   - serial driver dma mapping api changes

   - lots of other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  vcs: prevent write access to vcsu devices
  tty: vt: keyboard: reject invalid keycodes
  tty: don't crash in tty_init_dev when missing tty_port
  serial: stm32: fix clearing interrupt error flags
  tty: Fix Kconfig indentation, continued
  serial: serial_core: Perform NULL checks for break_ctl ops
  tty: remove unused argument from tty_open_by_driver()
  tty: Fix Kconfig indentation
  {tty: serial, nand: onenand}: samsung: rename to fix build warning
  serial: ifx6x60: add missed pm_runtime_disable
  serial: pl011: Fix DMA ->flush_buffer()
  Revert "serial-uartlite: Move the uart register"
  Revert "serial-uartlite: Add get serial id if not provided"
  Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
  Revert "serial-uartlite: Add runtime support"
  Revert "serial-uartlite: Change logic how console_port is setup"
  Revert "serial-uartlite: Use allocated structure instead of static ones"
  tty: serial: msm_serial: Use dma_request_chan() directly for channel request
  tty: serial: tegra: Use dma_request_chan() directly for channel request
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Warn if a host bridge has no NUMA info (Yunsheng Lin)

   - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
     Efremov)

  Resource management:

   - Fix boot-time Embedded Controller GPE storm caused by incorrect
     resource assignment after ACPI Bus Check Notification (Mika
     Westerberg)

   - Protect pci_reassign_bridge_resources() against concurrent
     addition/removal (Benjamin Herrenschmidt)

   - Fix bridge dma_ranges resource list cleanup (Rob Herring)

   - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
     the MMIO and prefetchable MMIO window sizes of hotplug bridges
     independently (Nicholas Johnson)

   - Fix MMIO/MMIO_PREF window assignment that assigned more space than
     desired (Nicholas Johnson)

   - Only enforce bus numbers from bridge EA if the bridge has EA
     devices downstream (Subbaraya Sundeep)

   - Consolidate DT "dma-ranges" parsing and convert all host drivers to
     use shared parsing (Rob Herring)

  Error reporting:

   - Restore AER capability after resume (Mayurkumar Patel)

   - Add PoisonTLPBlocked AER counter (Rajat Jain)

   - Use for_each_set_bit() to simplify AER code (Andy Shevchenko)

   - Fix AER kernel-doc (Andy Shevchenko)

   - Add "pcie_ports=dpc-native" parameter to allow native use of DPC
     even if platform didn't grant control over AER (Olof Johansson)

  Hotplug:

   - Avoid returning prematurely from sysfs requests to enable or
     disable a PCIe hotplug slot (Lukas Wunner)

   - Don't disable interrupts twice when suspending hotplug ports (Mika
     Westerberg)

   - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
     Westerberg)

  Power management:

   - Remove unnecessary ASPM locking (Bjorn Helgaas)

   - Add support for disabling L1 PM Substates (Heiner Kallweit)

   - Allow re-enabling Clock PM after it has been disabled (Heiner
     Kallweit)

   - Add sysfs attributes for controlling ASPM link states (Heiner
     Kallweit)

   - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
     sysfs files (Heiner Kallweit)

   - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
     USB 2.0 or 1.1 connect events (Kai-Heng Feng)

   - Move power state check out of pci_msi_supported() (Bjorn Helgaas)

   - Fix incorrect MSI-X masking on resume and revert related nvme quirk
     for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)

   - Always return devices to D0 when thawing to fix hibernation with
     drivers like mlx4 that used legacy power management (previously we
     only did it for drivers with new power management ops) (Dexuan Cui)

   - Clear PCIe PME Status even for legacy power management (Bjorn
     Helgaas)

   - Fix PCI PM documentation errors (Bjorn Helgaas)

   - Use dev_printk() for more power management messages (Bjorn Helgaas)

   - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)

   - Convert xen-platform from legacy to generic power management (Bjorn
     Helgaas)

   - Removed unused .resume_early() and .suspend_late() legacy power
     management hooks (Bjorn Helgaas)

   - Rearrange power management code for clarity (Rafael J. Wysocki)

   - Decode power states more clearly ("4" or "D4" really refers to
     "D3cold") (Bjorn Helgaas)

   - Notice when reading PM Control register returns an error (~0)
     instead of interpreting it as being in D3hot (Bjorn Helgaas)

   - Add missing link delays required by the PCIe spec (Mika Westerberg)

  Virtualization:

   - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
     Helgaas)

   - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
     previously didn't recognize that) (Kuppuswamy Sathyanarayanan)

   - Allow VFs to use PASID (the PF PASID capability is shared by the
     VFs, but the code previously didn't recognize that) (Kuppuswamy
     Sathyanarayanan)

   - Disconnect PF and VF ATS enablement, since ATS in PFs and
     associated VFs can be enabled independently (Kuppuswamy
     Sathyanarayanan)

   - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)

   - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)

   - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
     Wilczynski)

   - Remove unused PRI and PASID stubs (Bjorn Helgaas)

   - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
     interfaces that are only used by built-in IOMMU drivers (Bjorn
     Helgaas)

   - Hide PRI and PASID state restoration functions used only inside the
     PCI core (Bjorn Helgaas)

   - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)

   - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)

   - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
     Cherian)

   - Fix the UPDCR register address in the Intel ACS quirk (Steffen
     Liebergeld)

   - Unify ACS quirk implementations (Bjorn Helgaas)

  Amlogic Meson host bridge driver:

   - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

   - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

   - Fix meson clock names to match DT bindings (Neil Armstrong)

   - Add meson support for Amlogic G12A SoC with separate shared PHY
     (Neil Armstrong)

   - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
     combo PHY (Neil Armstrong)

   - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

   - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
     (Neil Armstrong)

  Broadcom iProc host bridge driver:

   - Invalidate iProc PAXB address mapping before programming it
     (Abhishek Shah)

   - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)

  Cadence host bridge driver:

   - Refactor Cadence PCIe host controller to use as a library for both
     host and endpoint (Tom Joseph)

  Freescale Layerscape host bridge driver:

   - Add layerscape LS1028a support (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Add VMD bus 224-255 restriction decode (Jon Derrick)

   - Add VMD 8086:9A0B device ID (Jon Derrick)

   - Remove Keith from VMD maintainer list (Keith Busch)

  Marvell ARMADA 3700 / Aardvark host bridge driver:

   - Use LTSSM state to build link training flag since Aardvark doesn't
     implement the Link Training bit (Remi Pommarel)

   - Delay before training Aardvark link in case PERST# was asserted
     before the driver probe (Remi Pommarel)

   - Fix Aardvark issues with Root Control reads and writes (Remi
     Pommarel)

   - Don't rely on jiffies in Aardvark config access path since
     interrupts may be disabled (Remi Pommarel)

   - Fix Aardvark big-endian support (Grzegorz Jaszczyk)

  Marvell ARMADA 370 / XP host bridge driver:

   - Make mvebu_pci_bridge_emul_ops static (Ben Dooks)

  Microsoft Hyper-V host bridge driver:

   - Add hibernation support for Hyper-V virtual PCI devices (Dexuan
     Cui)

   - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
     Cui)

   - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)

  Mobiveil host bridge driver:

   - Change mobiveil csr_read()/write() function names that conflict
     with riscv arch functions (Kefeng Wang)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra CLKREQ dependency programming (Vidya Sagar)

  Renesas R-Car host bridge driver:

   - Remove unnecessary header include from rcar (Andrew Murray)

   - Tighten register index checking for rcar inbound range programming
     (Marek Vasut)

   - Fix rcar inbound range alignment calculation to improve packing of
     multiple entries (Marek Vasut)

   - Update rcar MACCTLR setting to match documentation (Yoshihiro
     Shimoda)

   - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
     (Yoshihiro Shimoda)

   - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
     Horman)

  Rockchip host bridge driver:

   - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
     Murphy)

  Socionext UniPhier host bridge driver:

   - Set uniphier to host (RC) mode always (Kunihiko Hayashi)

  Endpoint drivers:

   - Fix endpoint driver sign extension problem when shifting page
     number to phys_addr_t (Alan Mikhak)

  Misc:

   - Add NumaChip SPDX header (Krzysztof Wilczynski)

   - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)

   - Remove unused includes (Krzysztof Wilczynski)

   - Removed unused sysfs attribute groups (Ben Dooks)

   - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)

   - Add PCIe Link Control 2 register field definitions to replace magic
     numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)

   - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
     Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)

   - Use pcie_capability_read_word() instead of pci_read_config_word()
     in AMDGPU and Radeon CIK/SI (Frederick Lawler)

   - Remove unused pci_irq_get_node() Greg Kroah-Hartman)

   - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
     (Palmer Dabbelt, Michal Simek)

   - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)

   - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
     Helgaas)

   - Fix bridge emulation big-endian support (Grzegorz Jaszczyk)

   - Fix dwc find_next_bit() usage (Niklas Cassel)

   - Fix pcitest.c fd leak (Hewenliang)

   - Fix typos and comments (Bjorn Helgaas)

   - Fix Kconfig whitespace errors (Krzysztof Kozlowski)"

* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
  PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
  asm-generic: Make msi.h a mandatory include/asm header
  Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
  PCI/MSI: Fix incorrect MSI-X masking on resume
  PCI/MSI: Move power state check out of pci_msi_supported()
  PCI/MSI: Remove unused pci_irq_get_node()
  PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
  PCI: hv: Change pci_protocol_version to per-hbus
  PCI: hv: Add hibernation support
  PCI: hv: Reorganize the code in preparation of hibernation
  MAINTAINERS: Remove Keith from VMD maintainer
  PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI: Fix indentation
  drm/radeon: Prefer pcie_capability_read_word()
  drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
  drm/radeon: Correct Transmit Margin masks
  drm/amdgpu: Prefer pcie_capability_read_word()
  PCI: uniphier: Set mode register to host mode
  drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
  ...

Pull RTC updates from Alexandre Belloni:
 "A lot of unnecessary code removal in here that ends up decreasing the
  number of lines in the subsystem. The ds1343 and ds1347 drivers got
  cleaned up. The rest are the usual fixes and new features.

  Subsystem:
   - fix warnings and errors with make W=1
   - UIE are now disabled while setting the RTC time
   - UIE are now disallowed when the RTC time is not set.

  Drivers:
   - remove unecessary .remove callbacks
   - Set RTC range for cros-ec, ds1343, ds1347, m41t80, s35390a, vt8500
   - Use devm_platform_ioremap_resource where applicable
   - rv3028: add clock out support"

* tag 'rtc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
  rtc: Fix Kconfig indentation
  rtc: xgene: Remove unused struct device in struct xgene_rtc_dev
  rtc: sun6i: Remove struct device from sun6i_rtc_dev
  rtc: st-lpc: Remove struct resource from struct st_rtc
  rtc: pcf8523: Remove struct pcf8523
  rtc: meson: remove redundant assignment to variable retries
  rtc: v3020: remove set but unused variable
  rtc: tegra: remove set but unused variable
  rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtc
  rtc: m41t80: remove excess kerneldoc
  rtc: ds1685: fix build error with make W=1
  rtc: ds1685: remove set but unused variables
  rtc: ds1374: remove unused variable
  rtc: sysfs: fix hctosys_show kerneldoc
  rtc: interface: fix kerneldoc comments
  rtc: msm6242: Remove unneeded msm6242_set()/msm6242_clear() functions
  rtc: msm6242: Fix reading of 10-hour digit
  rtc: tps65910: allow using RTC without alarm interrupt
  rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
  rtc: pcf8563: Constify clkout_rates
  ...

Pull iomap cleanups from Darrick Wong:
 "Aome more new iomap code for 5.5.

  There's not much this time -- just removing some local variables that
  don't need to exist in the iomap directio code"

* tag 'iomap-5.5-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: remove unneeded variable in iomap_dio_rw()
  iomap: Do not create fake iter in iomap_dio_bio_actor()

Merge tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Features:

   - increase left match history buffer size to provide improved
     conflict resolution in overlapping execution rules.

   - switch buffer allocation to use a memory pool and GFP_KERNEL where
     possible.

   - add compression of policy blobs to reduce memory usage.

  Cleanups:

   - fix spelling mistake "immutible" -> "immutable"

  Bug fixes:

   - fix unsigned len comparison in update_for_len macro

   - fix sparse warning for type-casting of current->real_cred"

* tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: make it so work buffers can be allocated from atomic context
  apparmor: reduce rcu_read_lock scope for aa_file_perm mediation
  apparmor: fix wrong buffer allocation in aa_new_mount
  apparmor: fix unsigned len comparison with less than zero
  apparmor: increase left match history buffer size
  apparmor: Switch to GFP_KERNEL where possible
  apparmor: Use a memory pool instead per-CPU caches
  apparmor: Force type-casting of current->real_cred
  apparmor: fix spelling mistake "immutible" -> "immutable"
  apparmor: fix blob compression when ns is forced on a policy load
  apparmor: fix missing ZLIB defines
  apparmor: fix blob compression build failure on ppc
  apparmor: Initial implementation of raw policy blob compression

Pull more s390 updates from Vasily Gorbik:

 - Make stack unwinder reliable and suitable for livepatching. Add
   unwinder testing module.

 - Fixes for CALL_ON_STACK helper used for stack switching.

 - Fix unwinding from bpf code.

 - Fix getcpu and remove compat support in vdso code.

 - Fix address space control registers initialization.

 - Save KASLR offset for early dumps.

 - Handle new FILTERED_BY_HYPERVISOR reply code in crypto code.

 - Minor perf code cleanup and potential memory leak fix.

 - Add couple of error messages for corner cases during PCI device
   creation.

* tag 's390-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (33 commits)
  s390: remove compat vdso code
  s390/livepatch: Implement reliable stack tracing for the consistency model
  s390/unwind: add stack pointer alignment sanity checks
  s390/unwind: filter out unreliable bogus %r14
  s390/unwind: start unwinding from reliable state
  s390/test_unwind: add program check context tests
  s390/test_unwind: add irq context tests
  s390/test_unwind: print verbose unwinding results
  s390/test_unwind: add CALL_ON_STACK tests
  s390: fix register clobbering in CALL_ON_STACK
  s390/test_unwind: require that unwinding ended successfully
  s390/unwind: add a test for the internal API
  s390/unwind: always inline get_stack_pointer
  s390/pci: add error message on device number limit
  s390/pci: add error message for UID collision
  s390/cpum_sf: Check for SDBT and SDB consistency
  s390/cpum_sf: Use TEAR_REG macro consistantly
  s390/cpum_sf: Remove unnecessary check for pending SDBs
  s390/cpum_sf: Replace function name in debug statements
  s390/kaslr: store KASLR offset for early dumps
  ...

Pull Xtensa updates from Max Filippov:

 - add support for execute in place (XIP) kernels

 - improvements in inline assembly: use named arguments and "m"
   constraints where possible

 - improve stack dumping

 - clean up system_call code and syscall tracing

 - various small fixes and cleanups

* tag 'xtensa-20191201' of git://github.com/jcmvbkbc/linux-xtensa: (30 commits)
  xtensa: clean up system_call/xtensa_rt_sigreturn interaction
  xtensa: fix system_call interaction with ptrace
  xtensa: rearrange syscall tracing
  xtensa: fix syscall_set_return_value
  xtensa: drop unneeded headers from coprocessor.S
  xtensa: entry: Remove unneeded need_resched() loop
  xtensa: use MEMBLOCK_ALLOC_ANYWHERE for KASAN shadow map
  xtensa: fix TLB sanity checker
  xtensa: get rid of __ARCH_USE_5LEVEL_HACK
  xtensa: mm: fix PMD folding implementation
  xtensa: make stack dump size configurable
  xtensa: improve stack dumping
  xtensa: use "m" constraint instead of "r" in futex.h assembly
  xtensa: use "m" constraint instead of "a" in cmpxchg.h assembly
  xtensa: use named assembly arguments in cmpxchg.h
  xtensa: use "m" constraint instead of "a" in atomic.h assembly
  xtensa: use named assembly arguments in atomic.h
  xtensa: use "m" constraint instead of "a" in bitops.h assembly
  xtensa: use named assembly arguments in bitops.h
  xtensa: use macros to generate *_bit and test_and_*_bit functions
  ...

Pull timer updates from Ingo Molnar:
 "The main changes in the timer code in this cycle were:

   - Clockevent updates:

      - timer-of framework cleanups. (Geert Uytterhoeven)

      - Use timer-of for the renesas-ostm and the device name to prevent
        name collision in case of multiple timers. (Geert Uytterhoeven)

      - Check if there is an error after calling of_clk_get in asm9260
        (Chuhong Yuan)

   - ABI fix: Zero out high order bits of nanoseconds on compat
     syscalls. This got broken a year ago, with apparently no side
     effects so far.

     Since the kernel would use random data otherwise I don't think we'd
     have other options but to fix the bug, even if there was a side
     effect to applications (Dmitry Safonov)

   - Optimize ns_to_timespec64() on 32-bit systems: move away from
     div_s64_rem() which can be slow, to div_u64_rem() which is faster
     (Arnd Bergmann)

   - Annotate KCSAN-reported false positive data races in
     hrtimer_is_queued() users by moving timer->state handling over to
     the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
     (Eric Dumazet)

   - Misc cleanups and small fixes"

[ I undid the "ABI fix" and updated the comments instead. The reason
  there were apparently no side effects is that the fix was a no-op.

  The updated comment is to say _why_ it was a no-op.    - Linus ]

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Zero the upper 32-bits in __kernel_timespec on 32-bit
  time: Rename tsk->real_start_time to ->start_boottime
  hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
  time: Fix spelling mistake in comment
  time: Optimize ns_to_timespec64()
  hrtimer: Annotate lockless access to timer->state
  clocksource/drivers/asm9260: Add a check for of_clk_get
  clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
  clocksource/drivers/renesas-ostm: Convert to timer_of
  clocksource/drivers/timer-of: Use unique device name instead of timer
  clocksource/drivers/timer-of: Convert last full_name to %pOF

Pull irq updates from Ingo Molnar:
 "Most of the IRQ subsystem changes in this cycle were irq-chip driver
  updates:

   - Qualcomm PDC wakeup interrupt support

   - Layerscape external IRQ support

   - Broadcom bcm7038 PM and wakeup support

   - Ingenic driver cleanup and modernization

   - GICv3 ITS preparation for GICv4.1 updates

   - GICv4 fixes

  There's also the series from Frederic Weisbecker that fixes memory
  ordering bugs for the irq-work logic, whose primary fix is to turn
  work->irq_work.flags into an atomic variable and then convert the
  complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
  much simpler atomic_fetch_or() call.

  There are also various smaller cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
  pinctrl/msm: Setup GPIO chip in hierarchy
  irqchip/qcom-pdc: Add irqchip set/get state calls
  irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
  irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
  irqchip/qcom-pdc: Update max PDC interrupts
  of/irq: Document properties for wakeup interrupt parent
  genirq: Introduce irq_chip_get/set_parent_state calls
  irqdomain: Add bus token DOMAIN_BUS_WAKEUP
  genirq: Fix function documentation of __irq_alloc_descs()
  irq_work: Fix IRQ_WORK_BUSY bit clearing
  irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
  irq_work: Slightly simplify IRQ_WORK_PENDING clearing
  irq_work: Fix irq_work_claim() memory ordering
  irq_work: Convert flags to atomic_t
  irqchip: Ingenic: Add process for more than one irq at the same time.
  irqchip: ingenic: Alloc generic chips from IRQ domain
  irqchip: ingenic: Get virq number from IRQ domain
  irqchip: ingenic: Error out if IRQ domain creation failed
  irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
  ...

Pull dmi updates from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Add dmi_memdev_handle
  firmware: dmi: Remember the memory type

Pull percpu updates from Dennis Zhou:
 "This has a change to fix percpu-refcount for RT kernels because
  rcu-sched disables preemption and the refcount release callback might
  acquire a spinlock"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  Revert "percpu: add __percpu to SHIFT_PERCPU_PTR"
  percpu-refcount: Use normal instead of RCU-sched"
  percpu: add __percpu to SHIFT_PERCPU_PTR

Add a utility function dmi_memdev_handle() which returns the DMI
handle associated with a given memory slot. This will allow kernel
drivers to iterate over the memory slots.
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Store the memory type while walking the memory slots, and provide a
way to retrieve it later.
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Pull Kbuild updates from Masahiro Yamada:

 - remove unneeded asm headers from hexagon, ia64

 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving

 - add 'helpnewconfig' target, which shows help for new CONFIG options

 - support 'make nsdeps' for external modules

 - make rebuilds faster by deleting $(wildcard $^) checks

 - remove compile tests for kernel-space headers

 - refactor modpost to simplify modversion handling

 - make single target builds faster

 - optimize and clean up scripts/kallsyms.c

 - refactor various Makefiles and scripts

* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
  MAINTAINERS: update Kbuild/Kconfig maintainer's email address
  scripts/kallsyms: remove redundant initializers
  scripts/kallsyms: put check_symbol_range() calls close together
  scripts/kallsyms: make check_symbol_range() void function
  scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
  scripts/kallsyms: move more patterns to the ignored_prefixes array
  scripts/kallsyms: skip ignored symbols very early
  scripts/kallsyms: add const qualifiers where possible
  scripts/kallsyms: make find_token() return (unsigned char *)
  scripts/kallsyms: replace prefix_underscores_count() with strspn()
  scripts/kallsyms: add sym_name() to mitigate cast ugliness
  scripts/kallsyms: remove unneeded length check for prefix matching
  scripts/kallsyms: remove redundant is_arm_mapping_symbol()
  scripts/kallsyms: set relative_base more effectively
  scripts/kallsyms: shrink table before sorting it
  scripts/kallsyms: fix definitely-lost memory leak
  scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
  kbuild: make single target builds even faster
  modpost: respect the previous export when 'exported twice' is warned
  modpost: do not set ->preloaded for symbols from Module.symvers
  ...

Merge tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull more kselftest fixes from Shuah Khan:
 "This second Kselftest fixes update for Linux 5.5-rc1 consists of an
  urgent revert to fix regression in CI coverage"

* tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative paths"

Pull crypto fixes from Herbert Xu:

 - Fix build error in crypto lib code when crypto API is off

 - Fix NULL/error check in hisilicon

 - Fix Kconfig-related build error in talitos

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: hisilicon - fix a NULL vs IS_ERR() bug in sec_create_qp_ctx()
  crypto: talitos - Fix build error by selecting LIB_DES
  crypto: arch - conditionalize crypto api in arch glue for lib code

Pull OpenRISC update from Stafford Horne:
 "White space fixups in Kconfig files from Krzysztof Kozlowski"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix Kconfig indentation

Pull UML updates from Richard Weinberger:

 - Fixes for our new virtio code

 - Fix for the irqflags tracer

 - Kconfig coding style fixes

 - Allow BPF firmware loading in our vector driver

* tag 'for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Loadable BPF "Firmware" for vector drivers
  um: Fix Kconfig indentation
  um: virtio_uml: Disallow modular build
  um: virtio: Keep reading on -EAGAIN
  um: virtio: Remove device on disconnect
  um: Don't trace irqflags during shutdown

Pull UBI/UBIFS/JFFS2 updates from Richard Weinberger:
 "This pull request contains mostly fixes for UBI, UBIFS and JFFS2:

  UBI:

   - Fix a regression around producing a anchor PEB for fastmap.

     Due to a change in our locking fastmap was unable to produce fresh
     anchors an re-used the existing one a way to often.

  UBIFS:

   - Fixes for endianness. A few places blindly assumed little endian.

   - Fix for a memory leak in the orphan code.

   - Fix for a possible crash during a commit.

   - Revert a wrong bugfix.

  JFFS2:

   - Revert a bad bugfix (false positive from a code checking tool)"

* tag 'upstream-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  Revert "jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()"
  ubi: Fix producing anchor PEBs
  ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps
  ubifs: do_kill_orphans: Fix a memory leak bug
  Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path"
  ubifs: Fix type of sup->hash_algo
  ubifs: Fixed missed le64_to_cpu() in journal
  ubifs: Force prandom result to __le32
  ubifs: Remove obsolete TODO from dfs_file_write()
  ubi: Fix warning static is not at beginning of declaration
  ubi: Print skip_check in ubi_dump_vol_info()

Pull XFS updates from Darrick Wong:
 "For this release, we changed quite a few things.

  Highlights:

   - Fixed some long tail latency problems in the block allocator

   - Removed some long deprecated (and for the past several years no-op)
     mount options and ioctls

   - Strengthened the extended attribute and directory verifiers

   - Audited and fixed all the places where we could return EFSCORRUPTED
     without logging anything

   - Refactored the old SGI space allocation ioctls to make the
     equivalent fallocate calls

   - Fixed a race between fallocate and directio

   - Fixed an integer overflow when files have more than a few
     billion(!) extents

   - Fixed a longstanding bug where quota accounting could be incorrect
     when performing unwritten extent conversion on a freshly mounted fs

   - Fixed various complaints in scrub about soft lockups and
     unresponsiveness to signals

   - De-vtable'd the directory handling code, which should make it
     faster

   - Converted to the new mount api, for better or for worse

   - Cleaned up some memory leaks

  and quite a lot of other smaller fixes and cleanups.

  A more detailed summary:

   - Fill out the build string

   - Prevent inode fork extent count overflows

   - Refactor the allocator to reduce long tail latency

   - Rework incore log locking a little to reduce spinning

   - Break up the xfs_iomap_begin functions into smaller more cohesive
     parts

   - Fix allocation alignment being dropped too early when the
     allocation request is for more blocks than an AG is large

   - Other small cleanups

   - Clean up file buftarg retrieval helpers

   - Hoist the resvsp and unresvsp ioctls to the vfs

   - Remove the undocumented biosize mount option, since it has never
     been mentioned as existing or supported on linux

   - Clean up some of the mount option printing and parsing

   - Enhance attr leaf verifier to check block structure

   - Check dirent and attr names for invalid characters before passing
     them to the vfs

   - Refactor open-coded bmbt walking

   - Fix a few places where we return EIO instead of EFSCORRUPTED after
     failing metadata sanity checks

   - Fix a synchronization problem between fallocate and aio dio
     corrupting the file length

   - Clean up various loose ends in the iomap and bmap code

   - Convert to the new mount api

   - Make sure we always log something when returning EFSCORRUPTED

   - Fix some problems where long running scrub loops could trigger soft
     lockup warnings and/or fail to exit due to fatal signals pending

   - Fix various Coverity complaints

   - Remove most of the function pointers from the directory code to
     reduce indirection penalties

   - Ensure that dquots are attached to the inode when performing
     unwritten extent conversion after io

   - Deuglify incore projid and crtime types

   - Fix another AGI/AGF locking order deadlock when renaming

   - Clean up some quota typedefs

   - Remove the FSSETDM ioctls which haven't done anything in 20 years

   - Fix some memory leaks when mounting the log fails

   - Fix an underflow when updating an xattr leaf freemap

   - Remove some trivial wrappers

   - Report metadata corruption as an error, not a (potentially) fatal
     assertion

   - Clean up the dir/attr buffer mapping code

   - Allow fatal signals to kill scrub during parent pointer checks"

* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
  xfs: allow parent directory scans to be interrupted with fatal signals
  xfs: remove the mappedbno argument to xfs_da_get_buf
  xfs: remove the mappedbno argument to xfs_da_read_buf
  xfs: split xfs_da3_node_read
  xfs: remove the mappedbno argument to xfs_dir3_leafn_read
  xfs: remove the mappedbno argument to xfs_dir3_leaf_read
  xfs: remove the mappedbno argument to xfs_attr3_leaf_read
  xfs: remove the mappedbno argument to xfs_da_reada_buf
  xfs: improve the xfs_dabuf_map calling conventions
  xfs: refactor xfs_dabuf_map
  xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
  xfs: report corruption only as a regular error
  xfs: Remove kmem_zone_free() wrapper
  xfs: Remove kmem_zone_destroy() wrapper
  xfs: Remove slab init wrappers
  xfs: fix attr leaf header freemap.size underflow
  xfs: fix some memory leaks in log recovery
  xfs: fix another missing include
  xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
  xfs: remove duplicated include from xfs_dir2_data.c
  ...

Pull FireWire updates from Stefan Richter:

 - another y2038 fix

 - janitorial code movement

* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: code cleanup after vm_map_pages_zero introduction
  firewire: ohci: stop using get_seconds() for BUS_TIME

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: aacraid, ufs, zfcp,
  NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
  plus a whole load of minor updates and fixes.

  The major core changes are Al Viro's reworking of sg's handling of
  copy to/from user, Ming Lei's removal of the host busy counter to
  avoid contention in the multiqueue case and Damien Le Moal's fixing of
  residual tracking across error handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
  scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
  scsi: target: core: Fix a pr_debug() argument
  scsi: iscsi: Don't send data to unbound connection
  scsi: target: iscsi: Wait for all commands to finish before freeing a session
  scsi: target: core: Release SPC-2 reservations when closing a session
  scsi: target: core: Document target_cmd_size_check()
  scsi: bnx2i: fix potential use after free
  Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
  scsi: NCR5380: Add disconnect_mask module parameter
  scsi: NCR5380: Unconditionally clear ICR after do_abort()
  scsi: NCR5380: Call scsi_set_resid() on command completion
  scsi: scsi_debug: num_tgts must be >= 0
  scsi: lpfc: use hdwq assigned cpu for allocation
  scsi: arcmsr: fix indentation issues
  scsi: qla4xxx: fix double free bug
  scsi: pm80xx: Modified the logic to collect fatal dump
  scsi: pm80xx: Tie the interrupt name to the module instance
  scsi: pm80xx: Controller fatal error through sysfs
  scsi: pm80xx: Do not request 12G sas speeds
  scsi: pm80xx: Cleanup command when a reset times out
  ...

Pull Documentation updates from Jonathan Corbet:
 "Here are the main documentation changes for 5.5:

   - Various kerneldoc script enhancements.

   - More RST conversions; those are slowing down as we run out of
     things to convert, but we're a ways from done still.

   - Dan's "maintainer profile entry" work landed at last. Now we just
     need to get maintainers to fill in the profiles...

   - A reworking of the parallel build setup to work better with a
     variety of systems (and to not take over huge systems entirely in
     particular).

   - The MAINTAINERS file is now converted to RST during the build.
     Hopefully nobody ever tries to print this thing, or they will need
     to load a lot of paper.

   - A script and documentation making it easy for maintainers to add
     Link: tags at commit time.

  Also included is the removal of a bunch of spurious CR characters"

* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
  docs: remove a bunch of stray CRs
  docs: fix up the maintainer profile document
  libnvdimm, MAINTAINERS: Maintainer Entry Profile
  Maintainer Handbook: Maintainer Entry Profile
  MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
  docs, parallelism: Rearrange how jobserver reservations are made
  docs, parallelism: Do not leak blocking mode to other readers
  docs, parallelism: Fix failure path and add comment
  Documentation: Remove bootmem_debug from kernel-parameters.txt
  Documentation: security: core.rst: fix warnings
  Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
  Documentation/translation: Use Korean for Korean translation title
  docs/memory-barriers.txt: Remove remaining references to mmiowb()
  docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
  Documentation/kokr: Kill all references to mmiowb()
  docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
  docs: Add initial documentation for devfreq
  Documentation: Document how to get links with git am
  docs: Add request_irq() documentation
  ...

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Pull pstore bug fix from Kees Cook:

 - add missing "static" (Ben Dooks)

* tag 'pstore-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Make pstore_choose_compression() static

Pull iommu updates from Joerg Roedel:

 - Conversion of the AMD IOMMU driver to use the dma-iommu code for
   imlementing the DMA-API. This gets rid of quite some code in the
   driver itself, but also has some potential for regressions (non are
   known at the moment).

 - Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
   This also includes some firmware interface changes, but those are
   acked by the respective maintainers.

 - Preparatory work to support two distinct page-tables per domain in
   the ARM-SMMU driver

 - Power management improvements for the ARM SMMUv2

 - Custom PASID allocator support

 - Multiple PCI DMA alias support for the AMD IOMMU driver

 - Adaption of the Mediatek driver to the changed IO/TLB flush interface
   of the IOMMU core code.

 - Preparatory patches for the Renesas IOMMU driver to support future
   hardware.

* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
  iommu/rockchip: Don't provoke WARN for harmless IRQs
  iommu/vt-d: Turn off translations at shutdown
  iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
  iommu/arm-smmu: Remove duplicate error message
  iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
  iommu/ipmmu-vmsa: Add utlb_offset_base
  iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
  iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
  iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
  iommu/ipmmu-vmsa: tidyup register definitions
  iommu/ipmmu-vmsa: Remove all unused register definitions
  iommu/mediatek: Reduce the tlb flush timeout value
  iommu/mediatek: Get rid of the pgtlock
  iommu/mediatek: Move the tlb_sync into tlb_flush
  iommu/mediatek: Delete the leaf in the tlb_flush
  iommu/mediatek: Use gather to achieve the tlb range flush
  iommu/mediatek: Add a new tlb_lock for tlb_flush
  iommu/mediatek: Correct the flush_iotlb_all callback
  iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
  iommu/io-pgtable-arm: Rationalise MAIR handling
  ...

Pull dmaengine updates from Vinod Koul:
 "Here are the changes this time around, couple of new drivers and
  updates to few more:

   - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
     Freescale dpaa2 qDMA

   - Support for X1000 in JZ4780

   - Xilinx dma updates and support for Xilinx AXI MCDM controller

   - New bindings for rcar R8A774B1

   - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers"

* tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits)
  dmaengine: Fix Kconfig indentation
  dmaengine: sf-pdma: move macro to header file
  dmaengine: sf-pdma: replace /** with /* for non-function comment
  dmaengine: ti: edma: fix missed failure handling
  dmaengine: mmp_pdma: add missed of_dma_controller_free
  dmaengine: mmp_tdma: add missed of_dma_controller_free
  dmaengine: sprd: Add wrap address support for link-list mode
  MAINTAINERS: Add Green as SiFive PDMA driver maintainer
  dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00
  dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA
  dmaengine: zx: remove: removed dmam_pool_destroy
  dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
  dmaengine: iop-adma: clean up an indentation issue
  dmaengine: milbeaut-xdmac: remove redundant error log
  dmaengine: milbeaut-hdmac: remove redundant error log
  dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove
  dmaengine: JZ4780: Add support for the X1000.
  dt-bindings: dmaengine: Add X1000 bindings.
  dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
  dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
  ...

This is caused by dereferencing 'dev_data' after put_device() in
the telem_device_remove() function.
This patch just moves the put_device() down a bit to avoid this
issue.

Fixes: 1210d1e6 ("platform/chrome: wilco_ec: Add telemetry char device interface")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Nick Crews <ncrews@chromium.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Merge updates from Andrew Morton:
 "Incoming:

   - a small number of updates to scripts/, ocfs2 and fs/buffer.c

   - most of MM

  I still have quite a lot of material (mostly not MM) staged after
  linux-next due to -next dependencies. I'll send those across next week
  as the preprequisites get merged up"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
  mm/page_io.c: annotate refault stalls from swap_readpage
  mm/Kconfig: fix trivial help text punctuation
  mm/Kconfig: fix indentation
  mm/memory_hotplug.c: remove __online_page_set_limits()
  mm: fix typos in comments when calling __SetPageUptodate()
  mm: fix struct member name in function comments
  mm/shmem.c: cast the type of unmap_start to u64
  mm: shmem: use proper gfp flags for shmem_writepage()
  mm/shmem.c: make array 'values' static const, makes object smaller
  userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
  fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
  userfaultfd: wrap the common dst_vma check into an inlined function
  userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
  userfaultfd: use vma_pagesize for all huge page size calculation
  mm/madvise.c: use PAGE_ALIGN[ED] for range checking
  mm/madvise.c: replace with page_size() in madvise_inject_error()
  mm/mmap.c: make vma_merge() comment more easy to understand
  mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  autonuma: reduce cache footprint when scanning page tables
  autonuma: fix watermark checking in migrate_balanced_pgdat()
  ...