- 28 Sep, 2018 32 commits
-
-
Bruce Allan authored
Direct assignment is preferred over a memcpy() Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When shutting down the controlqs, we check if they are initialized before we shut them down and destroy the lock. This is important, as it prevents attempts to access the lock of an already shutdown queue. Unfortunately, we checked rq.head and sq.head as the value to determine if the queue was initialized. This doesn't work, because head is not reset when the queue is shutdown. In some flows, the adminq will have already been shut down prior to calling ice_shutdown_all_ctrlqs. This can result in a crash due to attempting to access the already destroyed mutex. Fix this by using rq.count and sq.count instead. Indeed, ice_shutdown_sq and ice_shutdown_rq already indicate that this is the value we should be using to determine of the queue was initialized. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/sched/sch_generic.c:944:6: warning: symbol 'qdisc_free_cb' was not declared. Should it be static? Fixes: 3a7d0d07 ("net: sched: extend Qdisc with rcu") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This test adds an fdb entry with the sticky flag and sends traffic from a different port with the same mac as a source address expecting the entry to not change ports if the flag is operating correctly. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We need to explicitly zero is_sticky when creating a new fdb, otherwise we might get a stale value for a new entry. Fixes: 435f2e7c ("net: bridge: add support for sticky fdb entries") Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Cleanups, minor additions & fixes for HNS3 driver This patch-set contains cleans-ups, minor changes and fixes to the HNS3 driver. ==================== Signed-off-by: -
Huazhong Tan authored
The user's coal configuration will be lost after reset, so the tx_coal and rx_coal fields are added to the struct hns_nic_priv to save the coal configuration and used to restore the user's configuration after the reset is complete. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Huazhong Tan authored
The current hns3_get_max_available_channels returns the total number of queues for the device, which makes ethtool -L set the number of queues per channel queues incorrectly, so hns3_get_max_available_channels should return the maximum available number of queues per channel, depending on the total number of queues allocated and the hardware configurations. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Huazhong Tan authored
hclge_tm_schd_info_update should return an error when num_tc is greater than alloc_tqps. This patch changes the return type of hnae3_register_ae_algo from void to int. Signed-off-by:
-
Yunsheng Lin authored
Currently hns3_nic_change_mtu will try to down the netdev before setting mtu, and it does not up the netdev when the setting fails, which causes netdev not up problem. This patch fixes it by not returning when the setting fails. Fixes: a8e8b7ff ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by:
-
Yunsheng Lin authored
The hardware expects a unit of 128 bytes when setting packet buffer. When calculating the packet buffer size, hclge_rx_buffer_calc does not round up the size as a unit of 128 byte, which may casue packet lost problem when stress testing. This patch fixes it by rounding up packet size when calculating. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Fuyun Liang authored
This patch adds serdes parallel inner loopback support for self test. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
-
Fuyun Liang authored
In fact, our implementation of mac loopback is the implementation of app loopback now. Current name is wrong. This patch renames mac loopback to app loopback. Signed-off-by:
-
Fuyun Liang authored
Our loop mode includes mac loop, serdes loop and phy loop. Not all of them are related with mac. This patch corrects their names. Signed-off-by:
-
Fuyun Liang authored
The extra mac address of pause param is used to do double check for pause frame. This patch set it to HW. If we do not do that, pfc pause frame will be transferred protocol stack when normal flow control mode is enabled. Signed-off-by:
-
Peng Li authored
This patch adds support for sctp checksum offload. Signed-off-by:
-
Arnd Bergmann authored
When B53_SERDES is a loadable module, a built-in srab driver still cannot reach it, so the previous fix is incomplete: b53_srab.c:(.text+0x3f4): undefined reference to `b53_serdes_init' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe64): undefined reference to `b53_serdes_link_state' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe74): undefined reference to `b53_serdes_link_set' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe88): undefined reference to `b53_serdes_an_restart' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea0): undefined reference to `b53_serdes_phylink_validate' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea4): undefined reference to `b53_serdes_config' Add a Kconfig dependency that forces srab to also be a module in this case, but allow it to be built-in when serdes is disabled or built-in. Fixes: 7a8c7f5c ("net: dsa: b53: Fix build with B53_SRAB enabled and not B53_SERDES") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The newly added runtime-pm support causes a harmless warning when CONFIG_PM is disabled: drivers/net/phy/mdio-bcm-unimac.c:330:12: error: 'unimac_mdio_resume' defined but not used [-Werror=unused-function] static int unimac_mdio_resume(struct device *d) drivers/net/phy/mdio-bcm-unimac.c:321:12: error: 'unimac_mdio_suspend' defined but not used [-Werror=unused-function] static int unimac_mdio_suspend(struct device *d) Marking the functions as __maybe_unused is the easiest workaround and avoids adding #ifdef checks. Fixes: b78ac6ec ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by:
-
Arnd Bergmann authored
gcc points out that the length of the temporary buffer may not be sufficient for large numbers of leds: drivers/net/phy/mscc.c: In function 'vsc85xx_probe': drivers/net/phy/mscc.c:460:45: error: '-mode' directive writing 5 bytes into a region of size between 0 and 9 [-Werror=format-overflow=] ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i); ^~~~~ drivers/net/phy/mscc.c:460:9: note: 'sprintf' output between 19 and 28 bytes into a destination of size 22 ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ While we can make a reasonable assumption that the number of LEDs is small, the cost of making the buffer a little bigger is insignificant as well. Fixes: 11bfdabb ("net: phy: mscc: factorize code for LEDs mode") Signed-off-by:Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Arnd Bergmann authored
The patch that removed the only users of the oldadv/newadv variables accidentally left the now-unused declarations behind: drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c: In function 'dpaa_set_pauseparam': drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c:185:14: error: unused variable 'oldadv' [-Werror=unused-variable] drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c:185:6: error: unused variable 'newadv' [-Werror=unused-variable] Fixes: 70814e81 ("net: ethernet: Add helper for set_pauseparam for Asym Pause") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:873:5: warning: symbol 'aq_fw1x_set_power' was not declared. Should it be static? Fixes: a0da96c0 ("net: aquantia: implement WOL support") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/tls/tls_sw.c:655:16: warning: symbol 'get_rec' was not declared. Should it be static? Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/core/gen_stats.c:166:1: warning: symbol '___gnet_stats_copy_basic' was not declared. Should it be static? Fixes: 5e111210 ("net/core: Add new basic hardware counter") Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qed/qed_ooo.c: In function 'qed_ooo_delete_isles': drivers/net/ethernet/qlogic/qed/qed_ooo.c:354:30: warning: variable 'p_archipelago' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qed/qed_ooo.c: In function 'qed_ooo_join_isles': drivers/net/ethernet/qlogic/qed/qed_ooo.c:463:30: warning: variable 'p_archipelago' set but not used [-Wunused-but-set-variable] Since commit 1eec2437 ("qed: Make OOO archipelagos into an array"), 'p_archipelago' is no longer in use. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== netlink: nested policy validation This adds nested policy validation, which lets you specify the nested attribute type, e.g. NLA_NESTED with sub-policy, or the new NLA_NESTED_ARRAY with sub-sub-policy. Changes in v2: * move setting the bad attr pointer/message into validate_nla() * remove the recursion patch since that's no longer needed * simply skip the generic bad attr pointer/message setting in case of nested nla_validate() failing since that could fail only due to validate_nla() failing inside, which already sets the extack information Changes in v3: * fix NLA_REJECT to have an error message if none is in policy ==================== Signed-off-by: -
Johannes Berg authored
Sometimes nested netlink attributes are just used as arrays, with the nla_type() of each not being used; we have this in nl80211 and e.g. NFTA_SET_ELEM_LIST_ELEMENTS. Add the ability to validate this type of message directly in the policy, by adding the type NLA_NESTED_ARRAY which does exactly this: require a first level of nesting but ignore the attribute type, and then inside each require a second level of nested and validate those attributes against a given policy (if present). Note that some nested array types actually require that all of the entries have the same index, this is possible to express in a nested policy already, apart from the validation that only the one allowed type is used. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Now that we have a validation_data pointer, and the len field in the policy is unused for NLA_NESTED, we can allow using them both to have nested validation. This can be nice in code, although we still have to use nla_parse_nested() or similar which would also take a policy; however, it also serves as documentation in the policy without requiring a look at the code. Signed-off-by:
-
Johannes Berg authored
This unifies the code between nla_parse() which sets the bad attribute pointer and an error message, and nla_validate() which only sets the bad attribute pointer. It also cleans up the code for NLA_REJECT and paves the way for nested policy validation, as it will allow us to easily skip setting the "generic" message without any extra args like the **error_msg now, just passing the extack through is now enough. While at it, remove the unnecessary label in nla_parse(). Suggested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Johannes Berg authored
The validation data is only used within the policy that should usually already be const, and isn't changed in any code that uses it. Therefore, make the validation_data pointer const. While at it, remove the duplicate variable in the bitfield validation that I'd otherwise have to change to const. Reviewed-by:
-
Johannes Berg authored
This isn't used anywhere, so we might as well get rid of it. Reviewed-by:
-
- 27 Sep, 2018 8 commits
-
-
Maciej Żenczykowski authored
(the parameters in question are mark and flow_flags) Reviewed-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Maciej Żenczykowski authored
(the parameters in question are mark and flow_flags) Reviewed-by:
-
Maxime Chevallier authored
The mvneta controller can handle speeds up to 2500Mbps on the SGMII interface. This relies on serdes configuration, the lane must be configured at 3.125Gbps and we can't use in-band autoneg at that speed. The main issue when supporting that speed on this particular controller is that the link partner can send ethernet frames with a shortened preamble, which if not explicitly enabled in the controller will cause unexpected behaviours. This was tested on Armada 385, with the comphy configuration done in bootloader. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
David S. Miller authored
Tonghao Zhang says: ==================== net: vhost: improve performance when enable busyloop This patches improve the guest receive performance. On the handle_tx side, we poll the sock receive queue at the same time. handle_rx do that in the same way. For more performance report, see patch 4 ==================== Signed-off-by: -
Tonghao Zhang authored
This patch improves the guest receive performance. On the handle_tx side, we poll the sock receive queue at the same time. handle_rx do that in the same way. We set the poll-us=100us and use the netperf to test throughput and mean latency. When running the tests, the vhost-net kthread of that VM, is alway 100% CPU. The commands are shown as below. Rx performance is greatly improved by this patch. There is not notable performance change on tx with this series though. This patch is useful for bi-directional traffic. netperf -H IP -t TCP_STREAM -l 20 -- -O "THROUGHPUT, THROUGHPUT_UNITS, MEAN_LATENCY" Topology: [Host] ->linux bridge -> tap vhost-net ->[Guest] TCP_STREAM: * Without the patch: 19842.95 Mbps, 6.50 us mean latency * With the patch: 37598.20 Mbps, 3.43 us mean latency Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Tonghao Zhang authored
Factor out generic busy polling logic and will be used for in tx path in the next patch. And with the patch, qemu can set differently the busyloop_timeout for rx queue. To avoid duplicate codes, introduce the helper functions: * sock_has_rx_data(changed from sk_has_rx_data) * vhost_net_busy_poll_try_queue Signed-off-by:
-
Tonghao Zhang authored
Use the VHOST_NET_VQ_XXX as a subclass for mutex_lock_nested. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Tonghao Zhang authored
This patch changes the way that lock all vqs at the same, to lock them one by one. It will be used for next patch to avoid the deadlock. Signed-off-by:
-
