- 28 Sep, 2023 12 commits
-
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mario Limonciello authored
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by:
-
Cong Liu authored
This patch fixes a null pointer dereference in the error message that is printed when the Display Core (DC) fails to initialize. The original message includes the DC version number, which is undefined if the DC is not initialized. Fixes: 9788d087 ("drm/amd/display: improve the message printed when loading DC") Signed-off-by:
Cong Liu <liucong2@kylinos.cn> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Harry Wentland authored
[WHAT] Prepare a virtual connector for writeback. Reviewed-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
Mario Limonciello authored
The error path for SDMA firmware loading is unnecessarily noisy. When a firmware is missing 3 errors show up: ``` amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2 [drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware! [drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <sdma_v4_0> failed -19 ``` The error code for the device init is bubbled up already, remove the second one. Signed-off-by:
-
Le Ma authored
Pass the correct size to smu_v13_0_6_print_clks, otherwise the same place in buf will be re-written. Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Le Ma authored
Replace with set_plpd_mode uniformly for places to use. Signed-off-by:
-
Le Ma authored
The allow_xgmi_power_down(true/false) will be generally replaced by: - allow: select_xgmi_plpd_policy(XGMI_PLPD_DEFAULT) - disallow: select_xgmi_plpd_policy(XGMI_PLPD_DISALLOW) Signed-off-by:
-
Le Ma authored
Assign DEFAULT mode if it supports plpd, otherwise keeps NONE v2: reduce ip version checks Signed-off-by:
-
Stylon Wang authored
[Why & How] These DPCD addresses are either declared in other header files where it makes more sense or simply not used by any DC code. Remove them to reduce redundancies and potential confusion. Reviewed-by:
Stylon Wang <stylon.wang@amd.com> Signed-off-by:
-
Harry Wentland authored
[WHY] Previously this only excluded build for a few amdgpu_dm binaries which makes no sense. [HOW] Wrap the entire Makefile in "ifneq ($(CONFIG_DRM_AMD_DC),)" Reviewed-by:
-
Mario Limonciello authored
A hang is reported on DCN 3.2 with seamless boot enabled. As the benefits come from an eDP setup, limit it to only enabled by default with APUs. Suggested-by: Alexander.Deucher@amd.com Reported-by: feifei.xu@amd.com Closes: https://lore.kernel.org/amd-gfx/85b427f6-11ec-4249-bf6f-eadf9c375f88@amd.com/T/#m2887e919d7c01b2a4860d2261b366d22e070f309Signed-off-by:
-
- 26 Sep, 2023 28 commits
-
-
Mario Limonciello authored
The error path for DMUB firmware loading is unnecessarily noisy. When a firmware is missing 3 errors show up: ``` amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_dmcub.bin failed with error -2 [drm:dm_early_init [amdgpu]] *ERROR* DMUB firmware loading failed: -19 [drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <dm> failed -19 ``` The error code for the device init is bubbled up already, remove the second one. Signed-off-by:
-
Philip Yang authored
If new range is splited to multiple pranges with max_svm_range_pages alignment and added to update_list, svm validate and map should keep going after error to make sure prange->mapped_to_gpu flag is up to date for the whole range. svm validate and map update set prange->mapped_to_gpu after mapping to GPUs successfully, otherwise clear prange->mapped_to_gpu flag (for update mapping case) instead of setting error flag, we can remove the redundant error flag to simpliy code. Refactor to remove goto and update prange->mapped_to_gpu flag inside svm_range_lock, to guarant we always evict queues or unmap from GPUs if there are invalid ranges. After svm validate and map return error -EAGIN, the caller retry will update the mapping for the whole range again. Fixes: c22b0440 ("drm/amdkfd: flag added to handle errors from svm validate and map") Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Tested-by:
James Zhu <james.zhu@amd.com> Signed-off-by:
-
Le Ma authored
Add xgmi_plpd_policy sysfs node for users to check and select xgmi per-link power down policy: - arg 0: disallow plpd - arg 1: default policy - arg 2: optimized policy v2: split from smu v13.0.6 code and miscellaneous updates v3: add usage comments around set/get functions Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
-
Le Ma authored
Add the interface to change xgmi per-link power down policy. v2: split from sysfs interface code and miscellaneous updates v3: check against XGMI_PLPD_DEFAULT/XGMI_PLPD_OPTIMIZED and pass PPSMC param Signed-off-by: -
Le Ma authored
Add enum pp_xgmi_plpd_mode to describe PLPD policies. v2: move the enum from amdgpu_smu.h to kgd_pp_interface.h Signed-off-by:
-
Le Ma authored
To add message to select PLPD mode. Signed-off-by:
-
Juntong Deng authored
AMD_IP_BLOCK_TYPE_VPE is a new IP BLOCK type for Video Processing Engine, but currently lacks description. Fix the documentation warning: warning: Enum value 'AMD_IP_BLOCK_TYPE_VPE' not described in enum 'amd_ip_block_type' Signed-off-by:
Juntong Deng <juntong.deng@outlook.com> Reviewed-by:
Lang Yu <lang.yu@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Mario Limonciello authored
DC code is reused by other OSes and so Linux return codes don't make sense. Change dc_set_power_state() to boolean and add a wrapper dm_set_power_state() to return a Linux error code for the memory allocation failure. Suggested-by:
-
Alex Deucher authored
AGP aperture is deprecated and no longer functional. v2: fix typo (Alex) v3: just skip the agp setup call v4: revert back to the original model v5: back to v3 Reviewed-by:
-
David (Ming Qiang) Wu authored
err_event_athub will corrupt VCPU buffer and not good to be restored in amdgpu_vcn_resume() and in this case the VCPU buffer needs to be cleared for VCN firmware to work properly. Acked-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by:
-
Luben Tuikov authored
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by:
Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c56 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
Mario Limonciello authored
During the suspend process dc_set_power_state() will use kzalloc to allocate memory, but this potentially fails with memory pressure. If it fails, the suspend should be aborted. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2362Signed-off-by:
-
Melissa Wen authored
dc->caps.color.mpc.gamut_remap says there is a post-blending color block for gamut remap matrix for DCN3 HW family and newer versions. However, those drivers still follow DCN10 programming that remap stream gamut_remap_matrix to DPP (pre-blending). To enable pre-blending and post-blending gamut_remap matrix supports at the same time, set stream gamut_remap to MPC and plane gamut_remap to DPP for DCN families that support both. It was tested using IGT KMS color tests for DRM CRTC CTM property and it preserves test results. Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Alex Deucher authored
To disable AGP, the start needs to be set to a higher value than the end. Set a default disable value for the AGP aperture and allow the IP specific GMC code to enable it selectively be calling amdgpu_gmc_agp_location(). Reviewed-by:
-
Alex Deucher authored
The BOT register needs to be larger than the TOP register for this to be properly disabled. The lower 22 bits of the BOT address are always 0 and the lower 22 bits of the TOP register are always 1 so you need to make the upper bits of BOT larger than the upper bits of BOT. Reviewed-by:
-
Mangesh Gadre authored
This identifies the physical ordering of devices in the hive v2: fix compilation issue Signed-off-by:
Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] After repopulating pipes for a split / merge, we want to find the lowest vlevel that supports the desired mpc combine level. Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Hong-lu Cheng authored
[Description] Change to new interface for notifying OS of cursor support changes Reviewed-by:
Gang Chu <gang.chu@amd.com> Reviewed-by:
Jaina Han <jaina.han@amd.com> Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
Hong-lu Cheng <hong-lu.cheng@amd.com> Tested-by:
-
Max Tseng authored
[Why] Allow dc report maximum display clock possible at vmin Reviewed-by:
Max Tseng <max.tseng@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along the following: - Fix incorrect odm change detection logic - Add primary pipe check when building slice table for dcn3x - Add get primary dpp pipe resource interface - Add missing function pointer for DCN321 resource - Rename DisableMinDispClkODM in dc_config - Break after finding supported vlevel for repopulate - Update OPP counter from new interface - Augment display clock in dc_cap structure - Improve code style on bios_parser2 - Skip audio config for virtual signal - Block MPO if it prevents pstate support - Fix DP2.0 timing sync - Improve x86 and dmub ips handshake - Remove guaranteed viewports limitation for odm - Add new windowed mpo odm minimal transition sequence - Reset stream slice count for new ODM policy - Determine fast update only before commit minimal transition state - Remove unused mmhub_reg_offsets Acked-by:
-
Wenjing Liu authored
[why] The current ODM change detection only compares first two ODM slices. If there are 4 ODM slices and the change is within the last two slices, the logic fails to detect ODM change and cause us to skip ODM programming unexpectedly. [how] Add a is ODM topology changed resource interface to check any ODM topology changes with a more generic method. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Wenjing Liu authored
[why] There is a corner use case where the same plane pointer can be added into dc state twice. In addition to plane state pointer check we also need to match primary pipe before identifying the same plane. Reviewed-by:
-
Wenjing Liu authored
[why] Need to have a helper function to find the primary dp pipe of the plane associated with a dpp pipe Reviewed-by:
-
Wenjing Liu authored
[why] acquire_free_pipe_as_secondary_opp_head function pointer is not assigned. This causes ODM mode to be disabled after enabling windowed MPO ODM capability on DCN321. [how] assign the correct function to the function pointer. Reviewed-by:
-
Gabe Teeger authored
[what and why] The logic for DisableMinDispClkODM is reversed now that odm is disabled by default. Renaming to EnableMinDispClkODM. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Gabe Teeger <gabe.teeger@amd.com> Tested-by:
-
Lang Yu authored
Fix truncation warnings. Fixes: 9d4346bd ("drm/amdgpu: add VPE 6.1.0 support") Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202309200028.aUVuM8os-lkp@intel.comSigned-off-by:
-
Rodrigo Siqueira authored
bios_parser2 uses space instead of tabs in multiple areas; this commit converts those spaces into tabs. It also removes some other small details. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
-
Alex Hung authored
[WHY] edid_override and drm_edid_override_connector_update, according to drm documentation, should not be referred outside drm_edid. [HOW] Remove and replace them accordingly. This can tested by IGT's kms_hdmi_inject test. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
