- 20 Aug, 2021 9 commits
-
-
Fuad Tabba authored
Add feature register flag definitions to clarify which features might be supported. Consolidate the various ID_AA64PFR0_ELx flags for all ELs. No functional change intended. Signed-off-by:
Fuad Tabba <tabba@google.com> Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210817081134.2918285-10-tabba@google.com
-
Fuad Tabba authored
Track the baseline guest value for cptr_el2 in struct kvm_vcpu_arch, similar to the other registers that control traps. Use this value when setting cptr_el2 for the guest. Currently this value is unchanged (CPTR_EL2_DEFAULT), but future patches will set trapping bits based on features supported for the guest. No functional change intended. Acked-by:
-
Fuad Tabba authored
__init_el2_debug configures mdcr_el2 at initialization based on, among other things, available hardware support. Trap deactivation doesn't check that, so keep the initial value. No functional change intended. Signed-off-by:
-
Fuad Tabba authored
On deactivating traps, restore the value of mdcr_el2 from the newly created and preserved host value vcpu context, rather than directly reading the hardware register. Up until and including this patch the two values are the same, i.e., the hardware register and the vcpu one. A future patch will be changing the value of mdcr_el2 on activating traps, and this ensures that its value will be restored. No functional change intended. Signed-off-by:
-
Fuad Tabba authored
Refactor sys_regs.h and sys_regs.c to make it easier to reuse common code. It will be used in nVHE in a later patch. Note that the refactored code uses __inline_bsearch for find_reg instead of bsearch to avoid copying the bsearch code for nVHE. No functional change intended. Acked-by:
-
Fuad Tabba authored
Change the names of hcr_el2 register fields to match the Arm Architecture Reference Manual. Easier for cross-referencing and for grepping. Also, change the name of CPTR_EL2_RES1 to CPTR_NVHE_EL2_RES1, because res1 bits are different for VHE. No functional change intended. Acked-by:
-
Fuad Tabba authored
Fix the places in KVM that treat MDCR_EL2 as a 32-bit register. More recent features (e.g., FEAT_SPEv1p2) use bits above 31. No functional change intended. Acked-by:
-
Fuad Tabba authored
Remove trailing whitespace from comment in trap_dbgauthstatus_el1(). No functional change intended. Acked-by:
-
Fuad Tabba authored
Add a function to check whether a VM is protected (under pKVM). Since the creation of protected VMs isn't enabled yet, this is a placeholder that always returns false. The intention is for this to become a check for protected VMs in the future (see Will's RFC). No functional change intended. Acked-by:
-
- 02 Aug, 2021 1 commit
-
-
Linus Torvalds authored
-
- 01 Aug, 2021 3 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top' abort, uncovering a design flaw on how namespace information is kept. The fix for that is more than we can do right now, leave it for the next merge window. - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up the decoding of some records. - Fix PMU alias matching. Thanks to James Clark and John Garry for these fixes. * tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "perf map: Fix dso->nsinfo refcounting" perf pmu: Fix alias matching perf cs-etm: Split --dump-raw-trace by AUX records
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Don't use r30 in VDSO code, to avoid breaking existing Go lang programs. - Change an export symbol to allow non-GPL modules to use spinlocks again. Thanks to Paul Menzel, and Srikar Dronamraju. * tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Don't use r30 to avoid breaking Go lang powerpc/pseries: Fix regression while building external modules
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "This contains a bunch of bug fixes in XFS. Dave and I have been busy the last couple of weeks to find and fix as many log recovery bugs as we can find; here are the results so far. Go fstests -g recoveryloop! ;) - Fix a number of coordination bugs relating to cache flushes for metadata writeback, cache flushes for multi-buffer log writes, and FUA writes for single-buffer log writes - Fix a bug with incorrect replay of attr3 blocks - Fix unnecessary stalls when flushing logs to disk - Fix spoofing problems when recovering realtime bitmap blocks" * tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent spoofing of rtbitmap blocks when recovering buffers xfs: limit iclog tail updates xfs: need to see iclog flags in tracing xfs: Enforce attr3 buffer recovery order xfs: logging the on disk inode LSN can make it go backwards xfs: avoid unnecessary waits in xfs_log_force_lsn() xfs: log forces imply data device cache flushes xfs: factor out forced iclog flushes xfs: fix ordering violation between cache flushes and tail updates xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog xfs: external logs need to flush data device xfs: flush data dev on external log write
-
- 31 Jul, 2021 1 commit
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three cifs/smb3 fixes, including two for stable, and a fix for an fallocate problem noticed by Clang" * tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add missing parsing of backupuid smb3: rc uninitialized in one fallocate path SMB3: fix readpage for large swap cache
-
- 30 Jul, 2021 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211) and netfilter trees. Current release - regressions: - mac80211: fix starting aggregation sessions on mesh interfaces Current release - new code bugs: - sctp: send pmtu probe only if packet loss in Search Complete state - bnxt_en: add missing periodic PHC overflow check - devlink: fix phys_port_name of virtual port and merge error - hns3: change the method of obtaining default ptp cycle - can: mcba_usb_start(): add missing urb->transfer_dma initialization Previous releases - regressions: - set true network header for ECN decapsulation - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY - sctp: fix return value check in __sctp_rcv_asconf_lookup Previous releases - always broken: - bpf: - more spectre corner case fixes, introduce a BPF nospec instruction for mitigating Spectre v4 - fix OOB read when printing XDP link fdinfo - sockmap: fix cleanup related races - mac80211: fix enabling 4-address mode on a sta vif after assoc - can: - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF - j1939: j1939_session_deactivate(): clarify lifetime of session object, avoid UAF - fix number of identical memory leaks in USB drivers - tipc: - do not blindly write skb_shinfo frags when doing decryption - fix sleeping in tipc accept routine" * tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) gve: Update MAINTAINERS list can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver bpf: Fix leakage due to insufficient speculative store bypass mitigation bpf: Introduce BPF nospec instruction for mitigating Spectre v4 sis900: Fix missing pci_disable_device() in probe and remove net: let flow have same hash in two directions nfc: nfcsim: fix use after free during module unload tulip: windbond-840: Fix missing pci_disable_device() in probe and remove sctp: fix return value check in __sctp_rcv_asconf_lookup nfc: s3fwrn5: fix undefined parameter values in dev_err() net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32 net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev() net/mlx5: Unload device upon firmware fatal error net/mlx5e: Fix page allocation failure for ptp-RQ over SF net/mlx5e: Fix page allocation failure for trap-RQ over SF ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert a recent IRQ resources handling modification that turned out to be problematic, fix suspend-to-idle handling on AMD platforms to take upcoming systems into account properly and fix the retrieval of the DPTF attributes of the PCH FIVR. Specifics: - Revert recent change of the ACPI IRQ resources handling that attempted to improve the ACPI IRQ override selection logic, but introduced serious regressions on some systems (Hui Wang). - Fix up quirks for AMD platforms in the suspend-to-idle support code so as to take upcoming systems using uPEP HID AMDI007 into account as appropriate (Mario Limonciello). - Fix the code retrieving DPTF attributes of the PCH FIVR so that it agrees on the return data type with the ACPI control method evaluated for this purpose (Srinivas Pandruvada)" * tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Fix reading of attributes Revert "ACPI: resources: Add checks for ACPI IRQ override" ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007 -
Linus Torvalds authored
Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup logic") we have sanitized the pipe write logic, and would only try to wake up readers if they needed it. In particular, if the pipe already had data in it before the write, there was no point in trying to wake up a reader, since any existing readers must have been aware of the pre-existing data already. Doing extraneous wakeups will only cause potential thundering herd problems. However, it turns out that some Android libraries have misused the EPOLL interface, and expected "edge triggered" be to "any new write will trigger it". Even if there was no edge in sight. Quoting Sandeep Patil: "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup logic') changed pipe write logic to wakeup readers only if the pipe was empty at the time of write. However, there are libraries that relied upon the older behavior for notification scheme similar to what's described in [1] One such library 'realm-core'[2] is used by numerous Android applications. The library uses a similar notification mechanism as GNU Make but it never drains the pipe until it is full. When Android moved to v5.10 kernel, all applications using this library stopped working. The library has since been fixed[3] but it will be a while before all applications incorporate the updated library" Our regression rule for the kernel is that if applications break from new behavior, it's a regression, even if it was because the application did something patently wrong. Also note the original report [4] by Michal Kerrisk about a test for this epoll behavior - but at that point we didn't know of any actual broken use case. So add the extraneous wakeup, to approximate the old behavior. [ I say "approximate", because the exact old behavior was to do a wakeup not for each write(), but for each pipe buffer chunk that was filled in. The behavior introduced by this change is not that - this is just "every write will cause a wakeup, whether necessary or not", which seems to be sufficient for the broken library use. ] It's worth noting that this adds the extraneous wakeup only for the write side, while the read side still considers the "edge" to be purely about reading enough from the pipe to allow further writes. See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic") for the pipe read case, which remains that "only wake up if the pipe was full, and we read something from it". Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1] Link: https://github.com/realm/realm-core [2] Link: https://github.com/realm/realm-core/issues/4666 [3] Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4] Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by:
Sandeep Patil <sspatil@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnaldo Carvalho de Melo authored
This makes 'perf top' abort in some cases, and the right fix will involve surgery that is too much to do at this stage, so revert for now and fix it in the next merge window. This reverts commit 2d6b74ba. Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Rafael J. Wysocki authored
* acpi-resources: Revert "ACPI: resources: Add checks for ACPI IRQ override" * acpi-dptf: ACPI: DPTF: Fix reading of attributes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - gendisk freeing fix (Christoph) - blk-iocost wake ordering fix (Tejun) - tag allocation error handling fix (John) - loop locking fix. While this isn't the prettiest fix in the world, nobody has any good alternatives for 5.14. Something to likely revisit for 5.15. (Tetsuo) * tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block: block: delay freeing the gendisk blk-iocost: fix operation ordering in iocg_wake_fn() blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling loop: reintroduce global lock for safe loop_validate_file() traversal
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - A fix for block backed reissue (me) - Reissue context hardening (me) - Async link locking fix (Pavel) * tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block: io_uring: fix poll requests leaking second poll entries io_uring: don't block level reissue off completion path io_uring: always reissue from task_work context io_uring: fix race in unified task_work running io_uring: fix io_prep_async_link locking
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull libata fixlets from Jens Axboe: - A fix for PIO highmem (Christoph) - Kill HAVE_IDE as it's now unused (Lukas) * tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block: arch: Kconfig: clean up obsolete use of HAVE_IDE libata: fix ata_pio_sector for CONFIG_HIGHMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fix -Warray-bounds warning, to help external patchset to make it default treewide - fix writeable device accounting (syzbot report) - fix fsync and log replay after a rename and inode eviction - fix potentially lost error code when submitting multiple bios for compressed range * tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: calculate number of eb pages properly in csum_tree_block btrfs: fix rw device counting in __btrfs_free_extra_devids btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction btrfs: mark compressed range uptodate only if all bio succeed
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - resume timing fix for intel-ish driver (Ye Xiang) - fix for using incorrect MMIO register in amd_sfh driver (Dylan MacKenzie) - Cintiq 24HDT / 27QHDT regression fix and touch processing fix for Wacom driver (Jason Gerecke) - device removal bugfix for ft260 driver (Michael Zaidman) - other small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: ft260: fix device removal due to USB disconnect HID: wacom: Skip processing of touches with negative slot values HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible" HID: apple: Add support for Keychron K1 wireless keyboard HID: fix typo in Kconfig HID: ft260: fix format type warning in ft260_word_show() HID: amd_sfh: Use correct MMIO register for DMA address HID: asus: Remove check for same LED brightness on set HID: intel-ish-hid: use async resume function
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "7 patches. Subsystems affected by this patch series: lib, ocfs2, and mm (slub, migration, and memcg)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook() slub: fix unreclaimable slab stat for bulk free mm/migrate: fix NR_ISOLATED corruption on 64-bit mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code ocfs2: issue zeroout to EOF blocks ocfs2: fix zero out valid data lib/test_string.c: move string selftest in the Runtime Testing menu
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-07-30 The first patch is by me and adds Yasushi SHOJI as a reviewer for the Microchip CAN BUS Analyzer Tool driver. Dan Carpenter's patch fixes a signedness bug in the hi311x driver. Pavel Skripkin provides 4 patches, the first targets the mcba_usb driver by adding the missing urb->transfer_dma initialization, which was broken in a previous commit. The last 3 patches fix a memory leak in the usb_8dev, ems_usb and esd_usb2 driver. * tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver ==================== Link: https://lore.kernel.org/r/20210730070526.1699867-1-mkl@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Wang Hai authored
When I use kfree_rcu() to free a large memory allocated by kmalloc_node(), the following dump occurs. BUG: kernel NULL pointer dereference, address: 0000000000000020 [...] Oops: 0000 [#1] SMP [...] Workqueue: events kfree_rcu_work RIP: 0010:__obj_to_index include/linux/slub_def.h:182 [inline] RIP: 0010:obj_to_index include/linux/slub_def.h:191 [inline] RIP: 0010:memcg_slab_free_hook+0x120/0x260 mm/slab.h:363 [...] Call Trace: kmem_cache_free_bulk+0x58/0x630 mm/slub.c:3293 kfree_bulk include/linux/slab.h:413 [inline] kfree_rcu_work+0x1ab/0x200 kernel/rcu/tree.c:3300 process_one_work+0x207/0x530 kernel/workqueue.c:2276 worker_thread+0x320/0x610 kernel/workqueue.c:2422 kthread+0x13d/0x160 kernel/kthread.c:313 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 When kmalloc_node() a large memory, page is allocated, not slab, so when freeing memory via kfree_rcu(), this large memory should not be used by memcg_slab_free_hook(), because memcg_slab_free_hook() is is used for slab. Using page_objcgs_check() instead of page_objcgs() in memcg_slab_free_hook() to fix this bug. Link: https://lkml.kernel.org/r/20210728145655.274476-1-wanghai38@huawei.com Fixes: 270c6a71 ("mm: memcontrol/slab: Use helpers to access slab page's memcg_data") Signed-off-by:Wang Hai <wanghai38@huawei.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Roman Gushchin <guro@fb.com> Reviewed-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Shakeel Butt authored
SLUB uses page allocator for higher order allocations and update unreclaimable slab stat for such allocations. At the moment, the bulk free for SLUB does not share code with normal free code path for these type of allocations and have missed the stat update. So, fix the stat update by common code. The user visible impact of the bug is the potential of inconsistent unreclaimable slab stat visible through meminfo and vmstat. Link: https://lkml.kernel.org/r/20210728155354.3440560-1-shakeelb@google.com Fixes: 6a486c0a ("mm, sl[ou]b: improve memory accounting") Signed-off-by:
-
Aneesh Kumar K.V authored
Similar to commit 2da9f630 ("mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit") avoid using unsigned int for nr_pages. With unsigned int type the large unsigned int converts to a large positive signed long. Symptoms include CMA allocations hanging forever due to alloc_contig_range->...->isolate_migratepages_block waiting forever in "while (unlikely(too_many_isolated(pgdat)))". Link: https://lkml.kernel.org/r/20210728042531.359409-1-aneesh.kumar@linux.ibm.com Fixes: c5fc5c3a ("mm: migrate: account THP NUMA migration counters correctly") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Yang Shi <shy828301@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Johannes Weiner authored
Dan Carpenter reports: The patch 2d146aa3: "mm: memcontrol: switch to rstat" from Apr 29, 2021, leads to the following static checker warning: kernel/cgroup/rstat.c:200 cgroup_rstat_flush() warn: sleeping in atomic context mm/memcontrol.c 3572 static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap) 3573 { 3574 unsigned long val; 3575 3576 if (mem_cgroup_is_root(memcg)) { 3577 cgroup_rstat_flush(memcg->css.cgroup); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is from static analysis and potentially a false positive. The problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold() which holds an rcu_read_lock(). And the cgroup_rstat_flush() function can sleep. 3578 val = memcg_page_state(memcg, NR_FILE_PAGES) + 3579 memcg_page_state(memcg, NR_ANON_MAPPED); 3580 if (swap) 3581 val += memcg_page_state(memcg, MEMCG_SWAP); 3582 } else { 3583 if (!swap) 3584 val = page_counter_read(&memcg->memory); 3585 else 3586 val = page_counter_read(&memcg->memsw); 3587 } 3588 return val; 3589 } __mem_cgroup_threshold() indeed holds the rcu lock. In addition, the thresholding code is invoked during stat changes, and those contexts have irqs disabled as well. If the lock breaking occurs inside the flush function, it will result in a sleep from an atomic context. Use the irqsafe flushing variant in mem_cgroup_usage() to fix this. Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org Fixes: 2d146aa3 ("mm: memcontrol: switch to rstat") Signed-off-by:Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Chris Down <chris@chrisdown.name> Reviewed-by:
Rik van Riel <riel@surriel.com> Acked-by:
-
Junxiao Bi authored
For punch holes in EOF blocks, fallocate used buffer write to zero the EOF blocks in last cluster. But since ->writepage will ignore EOF pages, those zeros will not be flushed. This "looks" ok as commit 6bba4471 ("ocfs2: fix data corruption by fallocate") will zero the EOF blocks when extend the file size, but it isn't. The problem happened on those EOF pages, before writeback, those pages had DIRTY flag set and all buffer_head in them also had DIRTY flag set, when writeback run by write_cache_pages(), DIRTY flag on the page was cleared, but DIRTY flag on the buffer_head not. When next write happened to those EOF pages, since buffer_head already had DIRTY flag set, it would not mark page DIRTY again. That made writeback ignore them forever. That will cause data corruption. Even directio write can't work because it will fail when trying to drop pages caches before direct io, as it found the buffer_head for those pages still had DIRTY flag set, then it will fall back to buffer io mode. To make a summary of the issue, as writeback ingores EOF pages, once any EOF page is generated, any write to it will only go to the page cache, it will never be flushed to disk even file size extends and that page is not EOF page any more. The fix is to avoid zero EOF blocks with buffer write. The following code snippet from qemu-img could trigger the corruption. 656 open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11 ... 660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...> 660 fallocate(11, 0, 2275868672, 327680) = 0 658 pwrite64(11, " Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Junxiao Bi authored
If append-dio feature is enabled, direct-io write and fallocate could run in parallel to extend file size, fallocate used "orig_isize" to record i_size before taking "ip_alloc_sem", when ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed out. Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com Fixes: 6bba4471 ("ocfs2: fix data corruption by fallocate") Signed-off-by:
-
Matteo Croce authored
STRING_SELFTEST is presented in the "Library routines" menu. Move it in Kernel hacking > Kernel Testing and Coverage > Runtime Testing together with other similar tests found in lib/ --- Runtime Testing <*> Test functions located in the hexdump module at runtime <*> Test string functions (NEW) <*> Test functions located in the string_helpers module at runtime <*> Test strscpy*() family of functions at runtime <*> Test kstrto*() family of functions at runtime <*> Test printf() family of functions at runtime <*> Test scanf() family of functions at runtime Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.comSigned-off-by:
Matteo Croce <mcroce@microsoft.com> Cc: Peter Rosin <peda@axentia.se> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Catherine Sullivan authored
The team maintaining the gve driver has undergone some changes, this updates the MAINTAINERS file accordingly. Signed-off-by:
Catherine Sullivan <csully@google.com> Signed-off-by:
Jon Olson <jonolson@google.com> Signed-off-by:
David Awogbemila <awogbemila@google.com> Signed-off-by:
Jeroen de Borst <jeroendb@google.com> Link: https://lore.kernel.org/r/20210729155258.442650-1-csully@google.comSigned-off-by:
-
Lukas Bulwahn authored
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is supported. As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3 ("ide: remove the legacy ide driver"), there is no need to mention HAVE_IDE in all those arch-specific Kconfig files. The issue was identified with ./scripts/checkkconfigsymbols.py. Fixes: b7fb14d3 ("ide: remove the legacy ide driver") Suggested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Skripkin authored
In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Pavel Skripkin authored
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Pavel Skripkin authored
In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Pavel Skripkin authored
Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557 ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557 ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-by:
Yasushi SHOJI <yasushi.shoji@gmail.com> Signed-off-by:
Yasushi SHOJI <yashi@spacecubics.com> [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by:
-
Dan Carpenter authored
The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kiliSigned-off-by:
-
