The zoned mode need to reset a zone before using it. We rely on btrfs's
original discard functionality (discarding unused block group range) to do
the resetting.

While the commit 63a7cb13 ("btrfs: auto enable discard=async when
possible") made the discard done in an async manner, a zoned reset do not
need to be async, as it is fast enough.

Even worth, delaying zone rests prevents using those zones again. So, let's
disable async discard on the zoned mode.

Fixes: 63a7cb13 ("btrfs: auto enable discard=async when possible")
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update message text ]
Signed-off-by: David Sterba <dsterba@suse.com>

If we have a transaction abort with qgroups enabled we get a warning
triggered when doing the final put on the transaction, like this:

  [552.6789] ------------[ cut here ]------------
  [552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6817] Modules linked in: btrfs blake2b_generic xor (...)
  [552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
  [552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6821] Code: bd a0 01 00 (...)
  [552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286
  [552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000
  [552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010
  [552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20
  [552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70
  [552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028
  [552.6821] FS:  0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000
  [552.6821] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0
  [552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [552.6822] Call Trace:
  [552.6822]  <TASK>
  [552.6822]  ? __warn+0x80/0x130
  [552.6822]  ? btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6824]  ? report_bug+0x1f4/0x200
  [552.6824]  ? handle_bug+0x42/0x70
  [552.6824]  ? exc_invalid_op+0x14/0x70
  [552.6824]  ? asm_exc_invalid_op+0x16/0x20
  [552.6824]  ? btrfs_put_transaction+0x123/0x130 [btrfs]
  [552.6826]  btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs]
  [552.6828]  ? _raw_spin_unlock_irqrestore+0x23/0x40
  [552.6828]  ? try_to_wake_up+0x94/0x5e0
  [552.6828]  ? __pfx_process_timeout+0x10/0x10
  [552.6828]  transaction_kthread+0x103/0x1d0 [btrfs]
  [552.6830]  ? __pfx_transaction_kthread+0x10/0x10 [btrfs]
  [552.6832]  kthread+0xee/0x120
  [552.6832]  ? __pfx_kthread+0x10/0x10
  [552.6832]  ret_from_fork+0x29/0x50
  [552.6832]  </TASK>
  [552.6832] ---[ end trace 0000000000000000 ]---

This corresponds to this line of code:

  void btrfs_put_transaction(struct btrfs_transaction *transaction)
  {
      (...)
          WARN_ON(!RB_EMPTY_ROOT(
                          &transaction->delayed_refs.dirty_extent_root));
      (...)
  }

The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.

So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT).

Fixes: 81f7eb00 ("btrfs: destroy qgroup extent records on transaction abort")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When the call to btrfs_extract_ordered_extent in btrfs_dio_submit_io
fails to allocate memory for a new ordered_extent, it calls into the
btrfs_dio_end_io for error handling.  btrfs_dio_end_io then assumes that
bbio->ordered is set because it is supposed to be at this point, except
for this error handling corner case.  Try to not overload the
btrfs_dio_end_io with error handling of a bio in a non-canonical state,
and instead call btrfs_finish_ordered_extent and iomap_dio_bio_end_io
directly for this error case.
Reported-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Fixes: b41b6f69 ("btrfs: use btrfs_finish_ordered_extent to complete direct writes")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476

  assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
  kernel BUG at fs/btrfs/subpage.c:229!
  Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
  CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
  Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
  pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
  pc : btrfs_subpage_assert+0xbc/0xf0
  lr : btrfs_subpage_assert+0xbc/0xf0
  Call trace:
   btrfs_subpage_assert+0xbc/0xf0
   btrfs_subpage_clear_checked+0x38/0xc0
   btrfs_page_clear_checked+0x48/0x98
   btrfs_truncate_block+0x5d0/0x6a8
   btrfs_cont_expand+0x5c/0x528
   btrfs_write_check.isra.0+0xf8/0x150
   btrfs_buffered_write+0xb4/0x760
   btrfs_do_write_iter+0x2f8/0x4b0
   btrfs_file_write_iter+0x1c/0x30
   do_iter_readv_writev+0xc8/0x158
   do_iter_write+0x9c/0x210
   vfs_iter_write+0x24/0x40
   iter_file_splice_write+0x224/0x390
   direct_splice_actor+0x38/0x68
   splice_direct_to_actor+0x12c/0x260
   do_splice_direct+0x90/0xe8
   generic_copy_file_range+0x50/0x90
   vfs_copy_file_range+0x29c/0x470
   __arm64_sys_copy_file_range+0xcc/0x498
   invoke_syscall.constprop.0+0x80/0xd8
   do_el0_svc+0x6c/0x168
   el0_svc+0x50/0x1b0
   el0t_64_sync_handler+0x114/0x120
   el0t_64_sync+0x194/0x198

This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it.  However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping.  release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.

Fix this by putting the set_page_extent_mapped() after the read.  This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped().  With
this patch I can now run generic/476 without panicing.

CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[REGRESSION]
Commit 75b47033 ("btrfs: raid56: migrate recovery and scrub recovery
path to use error_bitmap") changed the behavior of scrub_rbio().

Initially if we have no error reading the raid bio, we will assign
@need_check to true, then finish_parity_scrub() would later verify the
content of P/Q stripes before writeback.

But after that commit we never verify the content of P/Q stripes and
just writeback them.

This can lead to unrepaired P/Q stripes during scrub, or already
corrupted P/Q copied to the dev-replace target.

[FIX]
The situation is more complex than the regression, in fact the initial
behavior is not 100% correct either.

If we have the following rare case, it can still lead to the same
problem using the old behavior:

		0	16K	32K	48K	64K
	Data 1:	|IIIIIII|                       |
	Data 2:	|				|
	Parity:	|	|CCCCCCC|		|

Where "I" means IO error, "C" means corruption.

In the above case, we're scrubbing the parity stripe, then read out all
the contents of Data 1, Data 2, Parity stripes.

But found IO error in Data 1, which leads to rebuild using Data 2 and
Parity and got the correct data.

In that case, we would not verify if the Parity is correct for range
[16K, 32K).

So here we have to always verify the content of Parity no matter if we
did recovery or not.

This patch would remove the @need_check parameter of
finish_parity_scrub() completely, and would always do the P/Q
verification before writeback.

Fixes: 75b47033 ("btrfs: raid56: migrate recovery and scrub recovery path to use error_bitmap")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Running delayed iputs, which never happens in an irq context, needs to
lock the spinlock fs_info->delayed_iput_lock. When finishing bios for
data writes (irq context, bio.c) we call btrfs_put_ordered_extent() which
needs to add a delayed iput and for that it needs to acquire the spinlock
fs_info->delayed_iput_lock. Without disabling irqs when running delayed
iputs we can therefore deadlock on that spinlock. The same deadlock can
also happen when adding an inode to the delayed iputs list, since this
can be done outside an irq context as well.

Syzbot recently reported this, which results in the following trace:

  ================================
  WARNING: inconsistent lock state
  6.4.0-syzkaller-09904-ga507db1d #0 Not tainted
  --------------------------------
  inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
  btrfs-cleaner/16079 [HC0[0]:SC0[0]:HE1:SE1] takes:
  ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
  ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
  {IN-SOFTIRQ-W} state was registered at:
    lock_acquire kernel/locking/lockdep.c:5761 [inline]
    lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
    __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
    _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
    spin_lock include/linux/spinlock.h:350 [inline]
    btrfs_add_delayed_iput+0x128/0x390 fs/btrfs/inode.c:3490
    btrfs_put_ordered_extent fs/btrfs/ordered-data.c:559 [inline]
    btrfs_put_ordered_extent+0x2f6/0x610 fs/btrfs/ordered-data.c:547
    __btrfs_bio_end_io fs/btrfs/bio.c:118 [inline]
    __btrfs_bio_end_io+0x136/0x180 fs/btrfs/bio.c:112
    btrfs_orig_bbio_end_io+0x86/0x2b0 fs/btrfs/bio.c:163
    btrfs_simple_end_io+0x105/0x380 fs/btrfs/bio.c:378
    bio_endio+0x589/0x690 block/bio.c:1617
    req_bio_endio block/blk-mq.c:766 [inline]
    blk_update_request+0x5c5/0x1620 block/blk-mq.c:911
    blk_mq_end_request+0x59/0x680 block/blk-mq.c:1032
    lo_complete_rq+0x1c6/0x280 drivers/block/loop.c:370
    blk_complete_reqs+0xb3/0xf0 block/blk-mq.c:1110
    __do_softirq+0x1d4/0x905 kernel/softirq.c:553
    run_ksoftirqd kernel/softirq.c:921 [inline]
    run_ksoftirqd+0x31/0x60 kernel/softirq.c:913
    smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164
    kthread+0x344/0x440 kernel/kthread.c:389
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
  irq event stamp: 39
  hardirqs last  enabled at (39): [<ffffffff81d5ebc4>] __do_kmem_cache_free mm/slab.c:3558 [inline]
  hardirqs last  enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free mm/slab.c:3582 [inline]
  hardirqs last  enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free+0x244/0x370 mm/slab.c:3575
  hardirqs last disabled at (38): [<ffffffff81d5eb5e>] __do_kmem_cache_free mm/slab.c:3553 [inline]
  hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free mm/slab.c:3582 [inline]
  hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free+0x1de/0x370 mm/slab.c:3575
  softirqs last  enabled at (0): [<ffffffff814ac99f>] copy_process+0x227f/0x75c0 kernel/fork.c:2448
  softirqs last disabled at (0): [<0000000000000000>] 0x0

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(&fs_info->delayed_iput_lock);
    <Interrupt>
      lock(&fs_info->delayed_iput_lock);

   *** DEADLOCK ***

  1 lock held by btrfs-cleaner/16079:
   #0: ffff888107804860 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x103/0x4b0 fs/btrfs/disk-io.c:1463

  stack backtrace:
  CPU: 3 PID: 16079 Comm: btrfs-cleaner Not tainted 6.4.0-syzkaller-09904-ga507db1d #0
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
  Call Trace:
   <TASK>
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
   print_usage_bug kernel/locking/lockdep.c:3978 [inline]
   valid_state kernel/locking/lockdep.c:4020 [inline]
   mark_lock_irq kernel/locking/lockdep.c:4223 [inline]
   mark_lock.part.0+0x1102/0x1960 kernel/locking/lockdep.c:4685
   mark_lock kernel/locking/lockdep.c:4649 [inline]
   mark_usage kernel/locking/lockdep.c:4598 [inline]
   __lock_acquire+0x8e4/0x5e20 kernel/locking/lockdep.c:5098
   lock_acquire kernel/locking/lockdep.c:5761 [inline]
   lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
   __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
   _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
   spin_lock include/linux/spinlock.h:350 [inline]
   btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
   cleaner_kthread+0x2e5/0x4b0 fs/btrfs/disk-io.c:1478
   kthread+0x344/0x440 kernel/kthread.c:389
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
   </TASK>

So fix this by using spin_lock_irq() and spin_unlock_irq() when running
delayed iputs, and using spin_lock_irqsave() and spin_unlock_irqrestore()
when adding a delayed iput().

Reported-by: syzbot+da501a04be5ff533b102@syzkaller.appspotmail.com
Fixes: ec63b84d ("btrfs: add an ordered_extent pointer to struct btrfs_bio")
Link: https://lore.kernel.org/linux-btrfs/000000000000d5c89a05ffbd39dd@google.com/Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At btrfs_orphan_cleanup(), if we can't find an inode (btrfs_iget() returns
an -ENOENT error pointer), we proceed with 'ret' set to -ENOENT and the
inode pointer set to ERR_PTR(-ENOENT). Later when we proceed to the body
of the following if statement:

    if (ret == -ENOENT || inode->i_nlink) {
        (...)
        trans = btrfs_start_transaction(root, 1);
        if (IS_ERR(trans)) {
            ret = PTR_ERR(trans);
            iput(inode);
            goto out;
        }
        (...)
        ret = btrfs_del_orphan_item(trans, root,
                                    found_key.objectid);
        btrfs_end_transaction(trans);
        if (ret) {
            iput(inode);
            goto out;
        }
        continue;
    }

If we get an error from btrfs_start_transaction() or from the call to
btrfs_del_orphan_item() we end calling iput() against an inode pointer
that has a value of ERR_PTR(-ENOENT), resulting in a crash with the
following trace:

  [876.667] BUG: kernel NULL pointer dereference, address: 0000000000000096
  [876.667] #PF: supervisor read access in kernel mode
  [876.667] #PF: error_code(0x0000) - not-present page
  [876.667] PGD 0 P4D 0
  [876.668] Oops: 0000 [#1] PREEMPT SMP PTI
  [876.668] CPU: 0 PID: 2356187 Comm: mount Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [876.668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
  [876.668] RIP: 0010:iput+0xa/0x20
  [876.668] Code: ff ff ff 66 (...)
  [876.669] RSP: 0018:ffffafa9c0c9f9d0 EFLAGS: 00010282
  [876.669] RAX: ffffffffffffffe4 RBX: 000000000009453b RCX: 0000000000000000
  [876.669] RDX: 0000000000000001 RSI: ffffafa9c0c9f930 RDI: fffffffffffffffe
  [876.669] RBP: ffff95c612f3b800 R08: 0000000000000001 R09: ffffffffffffffe4
  [876.670] R10: 00018f2a71010000 R11: 000000000ead96e3 R12: ffff95cb7d6909a0
  [876.670] R13: fffffffffffffffe R14: ffff95c60f477000 R15: 00000000ffffffe4
  [876.670] FS:  00007f5fbe30a840(0000) GS:ffff95ccdfa00000(0000) knlGS:0000000000000000
  [876.670] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [876.671] CR2: 0000000000000096 CR3: 000000055e9f6004 CR4: 0000000000370ef0
  [876.671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [876.671] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [876.672] Call Trace:
  [876.744]  <TASK>
  [876.744]  ? __die_body+0x1b/0x60
  [876.744]  ? page_fault_oops+0x15d/0x450
  [876.745]  ? __kmem_cache_alloc_node+0x47/0x410
  [876.745]  ? do_user_addr_fault+0x65/0x8a0
  [876.745]  ? exc_page_fault+0x74/0x170
  [876.746]  ? asm_exc_page_fault+0x22/0x30
  [876.746]  ? iput+0xa/0x20
  [876.746]  btrfs_orphan_cleanup+0x221/0x330 [btrfs]
  [876.746]  btrfs_lookup_dentry+0x58f/0x5f0 [btrfs]
  [876.747]  btrfs_lookup+0xe/0x30 [btrfs]
  [876.747]  __lookup_slow+0x82/0x130
  [876.785]  walk_component+0xe5/0x160
  [876.786]  path_lookupat.isra.0+0x6e/0x150
  [876.786]  filename_lookup+0xcf/0x1a0
  [876.786]  ? mod_objcg_state+0xd2/0x360
  [876.786]  ? obj_cgroup_charge+0xf5/0x110
  [876.787]  ? should_failslab+0xa/0x20
  [876.787]  ? kmem_cache_alloc+0x47/0x450
  [876.787]  vfs_path_lookup+0x51/0x90
  [876.788]  mount_subtree+0x8d/0x130
  [876.788]  btrfs_mount+0x149/0x410 [btrfs]
  [876.788]  ? __kmem_cache_alloc_node+0x47/0x410
  [876.788]  ? vfs_parse_fs_param+0xc0/0x110
  [876.789]  legacy_get_tree+0x24/0x50
  [876.834]  vfs_get_tree+0x22/0xd0
  [876.852]  path_mount+0x2d8/0x9c0
  [876.852]  do_mount+0x79/0x90
  [876.852]  __x64_sys_mount+0x8e/0xd0
  [876.853]  do_syscall_64+0x38/0x90
  [876.899]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [876.958] RIP: 0033:0x7f5fbe50b76a
  [876.959] Code: 48 8b 0d a9 (...)
  [876.959] RSP: 002b:00007fff01925798 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  [876.959] RAX: ffffffffffffffda RBX: 00007f5fbe694264 RCX: 00007f5fbe50b76a
  [876.960] RDX: 0000561bde6c8720 RSI: 0000561bde6bdec0 RDI: 0000561bde6c31a0
  [876.960] RBP: 0000561bde6bdc70 R08: 0000000000000000 R09: 0000000000000001
  [876.960] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [876.960] R13: 0000561bde6c31a0 R14: 0000561bde6c8720 R15: 0000561bde6bdc70
  [876.960]  </TASK>

So fix this by setting 'inode' to NULL whenever we get an error from
btrfs_iget(), and to make the code simpler, stop testing for 'ret' being
-ENOENT to check if we have an inode - instead test for 'inode' being NULL
or not. Having a NULL 'inode' prevents any iput() call from crashing, as
iput() ignores NULL inode pointers. Also, stop testing for a NULL return
value from btrfs_iget() with PTR_ERR_OR_ZERO(), because btrfs_iget() never
returns NULL - in case an inode is not found, it returns ERR_PTR(-ENOENT),
and in case of memory allocation failure, it returns ERR_PTR(-ENOMEM).
We also don't need the extra iput() calls on the error branches for the
btrfs_start_transaction() and btrfs_del_orphan_item() calls, as we have
already called iput() before, so remove them.

Fixes: a13bb2c0 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At btrfs_orphan_cleanup(), if we were able to find the inode, we do an
iput() on the inode, then if btrfs_drop_verity_items() succeeds and then
either btrfs_start_transaction() or btrfs_del_orphan_item() fail, we do
another iput() in the respective error paths, resulting in an extra iput()
on the inode.

Fix this by setting inode to NULL after the first iput(), as iput()
ignores a NULL inode pointer argument.

Fixes: a13bb2c0 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.

Fixes: 12659251 ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If a task creates a new block group and that block group becomes unused
before we finish its creation, at btrfs_create_pending_block_groups(),
then when btrfs_mark_bg_unused() is called against the block group, we
assume that the block group is currently in the list of block groups to
reclaim, and we move it out of the list of new block groups and into the
list of unused block groups. This has two consequences:

1) We move it out of the list of new block groups associated to the
   current transaction. So the block group creation is not finished and
   if we attempt to delete the bg because it's unused, we will not find
   the block group item in the extent tree (or the new block group tree),
   its device extent items in the device tree etc, resulting in the
   deletion to fail due to the missing items;

2) We don't increment the reference count on the block group when we
   move it to the list of unused block groups, because we assumed the
   block group was on the list of block groups to reclaim, and in that
   case it already has the correct reference count. However the block
   group was on the list of new block groups, in which case no extra
   reference was taken because it's local to the current task. This
   later results in doing an extra reference count decrement when
   removing the block group from the unused list, eventually leading the
   reference count to 0.

This second case was caught when running generic/297 from fstests, which
produced the following assertion failure and stack trace:

  [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299
  [589.559] ------------[ cut here ]------------
  [589.559] kernel BUG at fs/btrfs/block-group.c:4299!
  [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI
  [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
  [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.561] Code: 68 62 da c0 (...)
  [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246
  [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000
  [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff
  [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50
  [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00
  [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100
  [589.563] FS:  00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000
  [589.563] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0
  [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [589.564] Call Trace:
  [589.564]  <TASK>
  [589.565]  ? __die_body+0x1b/0x60
  [589.565]  ? die+0x39/0x60
  [589.565]  ? do_trap+0xeb/0x110
  [589.565]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.566]  ? do_error_trap+0x6a/0x90
  [589.566]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.566]  ? exc_invalid_op+0x4e/0x70
  [589.566]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.567]  ? asm_exc_invalid_op+0x16/0x20
  [589.567]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.567]  ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
  [589.567]  close_ctree+0x35d/0x560 [btrfs]
  [589.568]  ? fsnotify_sb_delete+0x13e/0x1d0
  [589.568]  ? dispose_list+0x3a/0x50
  [589.568]  ? evict_inodes+0x151/0x1a0
  [589.568]  generic_shutdown_super+0x73/0x1a0
  [589.569]  kill_anon_super+0x14/0x30
  [589.569]  btrfs_kill_super+0x12/0x20 [btrfs]
  [589.569]  deactivate_locked_super+0x2e/0x70
  [589.569]  cleanup_mnt+0x104/0x160
  [589.570]  task_work_run+0x56/0x90
  [589.570]  exit_to_user_mode_prepare+0x160/0x170
  [589.570]  syscall_exit_to_user_mode+0x22/0x50
  [589.570]  ? __x64_sys_umount+0x12/0x20
  [589.571]  do_syscall_64+0x48/0x90
  [589.571]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [589.571] RIP: 0033:0x7f497ff0a567
  [589.571] Code: af 98 0e (...)
  [589.572] RSP: 002b:00007ffc98347358 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  [589.572] RAX: 0000000000000000 RBX: 00007f49800b8264 RCX: 00007f497ff0a567
  [589.572] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000557f558abfa0
  [589.573] RBP: 0000557f558a6ba0 R08: 0000000000000000 R09: 00007ffc98346100
  [589.573] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  [589.573] R13: 0000557f558abfa0 R14: 0000557f558a6cb0 R15: 0000557f558a6dd0
  [589.573]  </TASK>
  [589.574] Modules linked in: dm_snapshot dm_thin_pool (...)
  [589.576] ---[ end trace 0000000000000000 ]---

Fix this by adding a runtime flag to the block group to tell that the
block group is still in the list of new block groups, and therefore it
should not be moved to the list of unused block groups, at
btrfs_mark_bg_unused(), until the flag is cleared, when we finish the
creation of the block group at btrfs_create_pending_block_groups().

Fixes: a9f18971 ("btrfs: move out now unused BG from the reclaim list")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The mirror_num_ret is allowed to be NULL, although it has to be set when
smap is set.  Unfortunately that is not a well enough specifiable
invariant for static type checkers, so add a NULL check to make sure they
are fine.

Fixes: 03793cbb ("btrfs: add fast path for single device io in __btrfs_map_block")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Syzbot reported a panic that looks like this:

  assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE_PAUSED, in fs/btrfs/ioctl.c:465
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/messages.c:259!
  RIP: 0010:btrfs_assertfail+0x2c/0x30 fs/btrfs/messages.c:259
  Call Trace:
   <TASK>
   btrfs_exclop_balance fs/btrfs/ioctl.c:465 [inline]
   btrfs_ioctl_balance fs/btrfs/ioctl.c:3564 [inline]
   btrfs_ioctl+0x531e/0x5b30 fs/btrfs/ioctl.c:4632
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:870 [inline]
   __se_sys_ioctl fs/ioctl.c:856 [inline]
   __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

The reproducer is running a balance and a cancel or pause in parallel.
The way balance finishes is a bit wonky, if we were paused we need to
save the balance_ctl in the fs_info, but clear it otherwise and cleanup.
However we rely on the return values being specific errors, or having a
cancel request or no pause request.  If balance completes and returns 0,
but we have a pause or cancel request we won't do the appropriate
cleanup, and then the next time we try to start a balance we'll trip
this ASSERT.

The error handling is just wrong here, we always want to clean up,
unless we got -ECANCELLED and we set the appropriate pause flag in the
exclusive op.  With this patch the reproducer ran for an hour without
tripping, previously it would trip in less than a few minutes.

Reported-by: syzbot+c0f3acf145cb465426d5@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If we disable quotas while we have a relocation of a metadata block group
that has extents belonging to the quota root, we can cause the relocation
to fail with -ENOENT. This is because relocation builds backref nodes for
extents of the quota root and later needs to walk the backrefs and access
the quota root - however if in between a task disables quotas, it results
in deleting the quota root from the root tree (with btrfs_del_root(),
called from btrfs_quota_disable().

This can be sporadically triggered by test case btrfs/255 from fstests:

  $ ./check btrfs/255
  FSTYP         -- btrfs
  PLATFORM      -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMP PREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023
  MKFS_OPTIONS  -- /dev/sdc
  MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

  btrfs/255 6s ... _check_dmesg: something found in dmesg (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.dmesg)
  - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad)
      --- tests/btrfs/255.out	2023-03-02 21:47:53.876609426 +0000
      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad	2023-06-16 10:20:39.267563212 +0100
      @@ -1,2 +1,4 @@
       QA output created by 255
      +ERROR: error during balancing '/home/fdmanana/btrfs-tests/scratch_1': No such file or directory
      +There may be more info in syslog - try dmesg | tail
       Silence is golden
      ...
      (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/255.out /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad'  to see the entire diff)
  Ran: btrfs/255
  Failures: btrfs/255
  Failed 1 of 1 tests

To fix this make the quota disable operation take the cleaner mutex, as
relocation of a block group also takes this mutex. This is also what we
do when deleting a subvolume/snapshot, we take the cleaner mutex in the
cleaner kthread (at cleaner_kthread()) and then we call btrfs_del_root()
at btrfs_drop_snapshot() while under the protection of the cleaner mutex.

Fixes: bed92eae ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add a comment to struct btrfs_fs_info::dirty_cowonly_roots to mention
that struct btrfs_fs_info::trans_lock is the lock that protects that
list.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When deleting the free space tree we are deleting the free space root
from the list fs_info->dirty_cowonly_roots without taking the lock that
protects it, which is struct btrfs_fs_info::trans_lock.
This unsynchronized list manipulation may cause chaos if there's another
concurrent manipulation of this list, such as when adding a root to it
with ctree.c:add_root_to_dirty_list().

This can result in all sorts of weird failures caused by a race, such as
the following crash:

  [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
  [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.279928] Code: 85 38 06 00 (...)
  [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
  [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
  [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
  [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
  [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
  [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
  [337571.281723] FS:  00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
  [337571.281950] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
  [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [337571.282874] Call Trace:
  [337571.283101]  <TASK>
  [337571.283327]  ? __die_body+0x1b/0x60
  [337571.283570]  ? die_addr+0x39/0x60
  [337571.283796]  ? exc_general_protection+0x22e/0x430
  [337571.284022]  ? asm_exc_general_protection+0x22/0x30
  [337571.284251]  ? commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.284531]  btrfs_commit_transaction+0x42e/0xf90 [btrfs]
  [337571.284803]  ? _raw_spin_unlock+0x15/0x30
  [337571.285031]  ? release_extent_buffer+0x103/0x130 [btrfs]
  [337571.285305]  reset_balance_state+0x152/0x1b0 [btrfs]
  [337571.285578]  btrfs_balance+0xa50/0x11e0 [btrfs]
  [337571.285864]  ? __kmem_cache_alloc_node+0x14a/0x410
  [337571.286086]  btrfs_ioctl+0x249a/0x3320 [btrfs]
  [337571.286358]  ? mod_objcg_state+0xd2/0x360
  [337571.286577]  ? refill_obj_stock+0xb0/0x160
  [337571.286798]  ? seq_release+0x25/0x30
  [337571.287016]  ? __rseq_handle_notify_resume+0x3ba/0x4b0
  [337571.287235]  ? percpu_counter_add_batch+0x2e/0xa0
  [337571.287455]  ? __x64_sys_ioctl+0x88/0xc0
  [337571.287675]  __x64_sys_ioctl+0x88/0xc0
  [337571.287901]  do_syscall_64+0x38/0x90
  [337571.288126]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [337571.288352] RIP: 0033:0x7f478aaffe9b

So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the free space root from that list.

Fixes: a5ed9182 ("Btrfs: implement the free space B-tree")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When disabling quotas we are deleting the quota root from the list
fs_info->dirty_cowonly_roots without taking the lock that protects it,
which is struct btrfs_fs_info::trans_lock. This unsynchronized list
manipulation may cause chaos if there's another concurrent manipulation
of this list, such as when adding a root to it with
ctree.c:add_root_to_dirty_list().

This can result in all sorts of weird failures caused by a race, such as
the following crash:

  [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
  [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.279928] Code: 85 38 06 00 (...)
  [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
  [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
  [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
  [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
  [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
  [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
  [337571.281723] FS:  00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
  [337571.281950] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
  [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [337571.282874] Call Trace:
  [337571.283101]  <TASK>
  [337571.283327]  ? __die_body+0x1b/0x60
  [337571.283570]  ? die_addr+0x39/0x60
  [337571.283796]  ? exc_general_protection+0x22e/0x430
  [337571.284022]  ? asm_exc_general_protection+0x22/0x30
  [337571.284251]  ? commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.284531]  btrfs_commit_transaction+0x42e/0xf90 [btrfs]
  [337571.284803]  ? _raw_spin_unlock+0x15/0x30
  [337571.285031]  ? release_extent_buffer+0x103/0x130 [btrfs]
  [337571.285305]  reset_balance_state+0x152/0x1b0 [btrfs]
  [337571.285578]  btrfs_balance+0xa50/0x11e0 [btrfs]
  [337571.285864]  ? __kmem_cache_alloc_node+0x14a/0x410
  [337571.286086]  btrfs_ioctl+0x249a/0x3320 [btrfs]
  [337571.286358]  ? mod_objcg_state+0xd2/0x360
  [337571.286577]  ? refill_obj_stock+0xb0/0x160
  [337571.286798]  ? seq_release+0x25/0x30
  [337571.287016]  ? __rseq_handle_notify_resume+0x3ba/0x4b0
  [337571.287235]  ? percpu_counter_add_batch+0x2e/0xa0
  [337571.287455]  ? __x64_sys_ioctl+0x88/0xc0
  [337571.287675]  __x64_sys_ioctl+0x88/0xc0
  [337571.287901]  do_syscall_64+0x38/0x90
  [337571.288126]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [337571.288352] RIP: 0033:0x7f478aaffe9b

So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the quota root from that list.

Fixes: bed92eae ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The btrfs_inode_mod_outstanding_extents trace event only shows the modified
number to the number of outstanding extents. It would be helpful if we can
see the resulting extent number as well.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When updating the ctime, we also want to update i_version.

This is just something I noticed by inspection. There is probably no way
to test this today unless you can somehow get to this inode via nfsd.
Still, I think it's the right thing to do for consistency's sake.

David Sterba's comment: I don't see anything wrong with setting the
iversion bit, however I also don't see where this would be useful.
Agreed with the consistency, otherwise the time is updated when device
super block is wiped or a device initialized, both are big events so
missing that due to lack of iversion update seems unlikely. I'll add it
to the queue, thanks.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
[ add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>

The 'btrfs_compressed_bioset' struct isn't exported outside of the
fs/btrfs/compression.c file, so make it static to fix the following
sparse warning:

fs/btrfs/compression.c:40:16: warning: symbol 'btrfs_compressed_bioset' was not declared. Should it be static?
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Callers of `btrfs_reduce_alloc_profile` expect it to return exactly
one allocation profile flag, and failing to do so may ultimately
result in a WARN_ON and remount-ro when allocating new blocks, like
the below transaction abort on 6.1.

`btrfs_reduce_alloc_profile` has two ways of determining the profile,
first it checks if a conversion balance is currently running and
uses the profile we're converting to. If no balance is currently
running, it returns the max-redundancy profile which at least one
block in the selected block group has.

This works by simply checking each known allocation profile bit in
redundancy order. However, `btrfs_reduce_alloc_profile` has not been
updated as new flags have been added - first with the `DUP` profile
and later with the RAID1C34 profiles.

Because of the way it checks, if we have blocks with different
profiles and at least one is known, that profile will be selected.
However, if none are known we may return a flag set with multiple
allocation profiles set.

This is currently only possible when a balance from one of the three
unhandled profiles to another of the unhandled profiles is canceled
after allocating at least one block using the new profile.

In that case, a transaction abort like the below will occur and the
filesystem will need to be mounted with -o skip_balance to get it
mounted rw again (but the balance cannot be resumed without a
similar abort).

  [770.648] ------------[ cut here ]------------
  [770.648] BTRFS: Transaction aborted (error -22)
  [770.648] WARNING: CPU: 43 PID: 1159593 at fs/btrfs/extent-tree.c:4122 find_free_extent+0x1d94/0x1e00 [btrfs]
  [770.648] CPU: 43 PID: 1159593 Comm: btrfs Tainted: G        W 6.1.0-0.deb11.7-powerpc64le #1  Debian 6.1.20-2~bpo11+1a~test
  [770.648] Hardware name: T2P9D01 REV 1.00 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
  [770.648] NIP:  c00800000f6784fc LR: c00800000f6784f8 CTR: c000000000d746c0
  [770.648] REGS: c000200089afe9a0 TRAP: 0700   Tainted: G        W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
  [770.648] MSR:  9000000002029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 28848282  XER: 20040000
  [770.648] CFAR: c000000000135110 IRQMASK: 0
	    GPR00: c00800000f6784f8 c000200089afec40 c00800000f7ea800 0000000000000026
	    GPR04: 00000001004820c2 c000200089afea00 c000200089afe9f8 0000000000000027
	    GPR08: c000200ffbfe7f98 c000000002127f90 ffffffffffffffd8 0000000026d6a6e8
	    GPR12: 0000000028848282 c000200fff7f3800 5deadbeef0000122 c00000002269d000
	    GPR16: c0002008c7797c40 c000200089afef17 0000000000000000 0000000000000000
	    GPR20: 0000000000000000 0000000000000001 c000200008bc5a98 0000000000000001
	    GPR24: 0000000000000000 c0000003c73088d0 c000200089afef17 c000000016d3a800
	    GPR28: c0000003c7308800 c00000002269d000 ffffffffffffffea 0000000000000001
  [770.648] NIP [c00800000f6784fc] find_free_extent+0x1d94/0x1e00 [btrfs]
  [770.648] LR [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs]
  [770.648] Call Trace:
  [770.648] [c000200089afec40] [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] (unreliable)
  [770.648] [c000200089afed30] [c00800000f681398] btrfs_reserve_extent+0x1a0/0x2f0 [btrfs]
  [770.648] [c000200089afeea0] [c00800000f681bf0] btrfs_alloc_tree_block+0x108/0x670 [btrfs]
  [770.648] [c000200089afeff0] [c00800000f66bd68] __btrfs_cow_block+0x170/0x850 [btrfs]
  [770.648] [c000200089aff100] [c00800000f66c58c] btrfs_cow_block+0x144/0x288 [btrfs]
  [770.648] [c000200089aff1b0] [c00800000f67113c] btrfs_search_slot+0x6b4/0xcb0 [btrfs]
  [770.648] [c000200089aff2a0] [c00800000f679f60] lookup_inline_extent_backref+0x128/0x7c0 [btrfs]
  [770.648] [c000200089aff3b0] [c00800000f67b338] lookup_extent_backref+0x70/0x190 [btrfs]
  [770.648] [c000200089aff470] [c00800000f67b54c] __btrfs_free_extent+0xf4/0x1490 [btrfs]
  [770.648] [c000200089aff5a0] [c00800000f67d770] __btrfs_run_delayed_refs+0x328/0x1530 [btrfs]
  [770.648] [c000200089aff740] [c00800000f67ea2c] btrfs_run_delayed_refs+0xb4/0x3e0 [btrfs]
  [770.648] [c000200089aff800] [c00800000f699aa4] btrfs_commit_transaction+0x8c/0x12b0 [btrfs]
  [770.648] [c000200089aff8f0] [c00800000f6dc628] reset_balance_state+0x1c0/0x290 [btrfs]
  [770.648] [c000200089aff9a0] [c00800000f6e2f7c] btrfs_balance+0x1164/0x1500 [btrfs]
  [770.648] [c000200089affb40] [c00800000f6f8e4c] btrfs_ioctl+0x2b54/0x3100 [btrfs]
  [770.648] [c000200089affc80] [c00000000053be14] sys_ioctl+0x794/0x1310
  [770.648] [c000200089affd70] [c00000000002af98] system_call_exception+0x138/0x250
  [770.648] [c000200089affe10] [c00000000000c654] system_call_common+0xf4/0x258
  [770.648] --- interrupt: c00 at 0x7fff94126800
  [770.648] NIP:  00007fff94126800 LR: 0000000107e0b594 CTR: 0000000000000000
  [770.648] REGS: c000200089affe80 TRAP: 0c00   Tainted: G        W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
  [770.648] MSR:  900000000000d033 <SF,HV,EE,PR,ME,IR,DR,RI,LE>  CR: 24002848  XER: 00000000
  [770.648] IRQMASK: 0
	    GPR00: 0000000000000036 00007fffc9439da0 00007fff94217100 0000000000000003
	    GPR04: 00000000c4009420 00007fffc9439ee8 0000000000000000 0000000000000000
	    GPR08: 00000000803c7416 0000000000000000 0000000000000000 0000000000000000
	    GPR12: 0000000000000000 00007fff9467d120 0000000107e64c9c 0000000107e64d0a
	    GPR16: 0000000107e64d06 0000000107e64cf1 0000000107e64cc4 0000000107e64c73
	    GPR20: 0000000107e64c31 0000000107e64bf1 0000000107e64be7 0000000000000000
	    GPR24: 0000000000000000 00007fffc9439ee0 0000000000000003 0000000000000001
	    GPR28: 00007fffc943f713 0000000000000000 00007fffc9439ee8 0000000000000000
  [770.648] NIP [00007fff94126800] 0x7fff94126800
  [770.648] LR [0000000107e0b594] 0x107e0b594
  [770.648] --- interrupt: c00
  [770.648] Instruction dump:
  [770.648] 3b00ffe4 e8898828 481175f5 60000000 4bfff4fc 3be00000 4bfff570 3d220000
  [770.648] 7fc4f378 e8698830 4811cd95 e8410018 <0fe00000> f9c10060 f9e10068 fa010070
  [770.648] ---[ end trace 0000000000000000 ]---
  [770.648] BTRFS: error (device dm-2: state A) in find_free_extent_update_loop:4122: errno=-22 unknown
  [770.648] BTRFS info (device dm-2: state EA): forced readonly
  [770.648] BTRFS: error (device dm-2: state EA) in __btrfs_free_extent:3070: errno=-22 unknown
  [770.648] BTRFS error (device dm-2: state EA): failed to run delayed ref for logical 17838685708288 num_bytes 24576 type 184 action 2 ref_mod 1: -22
  [770.648] BTRFS: error (device dm-2: state EA) in btrfs_run_delayed_refs:2144: errno=-22 unknown
  [770.648] BTRFS: error (device dm-2: state EA) in reset_balance_state:3599: errno=-22 unknown

Fixes: 47e6f742 ("btrfs: add support for 3-copy replication (raid1c3)")
Fixes: 8d6fac00 ("btrfs: add support for 4-copy replication (raid1c4)")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Matt Corallo <blnxfsl@bluematt.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since the scrub rework introduced by commit 2af2aaf9 ("btrfs:
scrub: introduce structure for new BTRFS_STRIPE_LEN based interface")
and later commits, scrub only needs one single workqueue,
fs_info::scrub_worker.

That scrub_wr_completion_workers is initially to handle the delay work
after write bios finished.  But the new scrub code goes submit-and-wait
for write bios, thus all the work are done inside the scrub_worker.

The last user of fs_info::scrub_wr_completion_workers is removed in
commit 16f93993 ("btrfs: scrub: remove the old writeback
infrastructure"), so we can safely remove the workqueue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since the rework of scrub introduced by commit 2af2aaf9 ("btrfs:
scrub: introduce structure for new BTRFS_STRIPE_LEN based interface")
and later commits, scrub no longer keeps its data checksum inside sctx.

Instead we have scrub_stripe::csums for the checksum of the stripe.
Thus we can remove the unused scrub_ctx::csum_list member.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During truncation we reserve 2 metadata units when starting a transaction
(reserved space goes to fs_info->trans_block_rsv) and then attempt to
migrate 1 unit (min_size bytes) from fs_info->trans_block_rsv into the
local block reserve. If we ever fail we trigger a BUG_ON(), which should
never happen, because we reserved 2 units. However if we happen to fail
for some reason, we don't need to be so dire and hit a BUG_ON(), we can
just error out the truncation and, since this is highly unexpected,
surround the error check with WARN_ON(), to get an informative stack
trace and tag the branh as 'unlikely'. Also make the 'min_size' variable
const, since it's not supposed to ever change and any accidental change
could possibly make the space migration not so unlikely to fail.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During the transaction commit path, at create_pending_snapshot(), there
is no need to BUG_ON() in case we fail to get a dir index for the snapshot
in the parent directory. This should fail very rarely because the parent
inode should be loaded in memory already, with the respective delayed
inode created and the parent inode's index_cnt field already initialized.

However if it fails, it may be -ENOMEM like the comment at
create_pending_snapshot() says or any error returned by
btrfs_search_slot() through btrfs_set_inode_index_count(), which can be
pretty much anything such as -EIO or -EUCLEAN for example. So the comment
is not correct when it says it can only be -ENOMEM.

However doing a BUG_ON() here is overkill, since we can instead abort
the transaction and return the error. Note that any error returned by
create_pending_snapshot() will eventually result in a transaction
abort at cleanup_transaction(), called from btrfs_commit_transaction(),
but we can explicitly abort the transaction at this point instead so that
we get a stack trace to tell us that the call to btrfs_set_inode_index()
failed.

So just abort the transaction and return in case btrfs_set_inode_index()
returned an error at create_pending_snapshot().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There's really no need to BUG_ON() if we find a symlink with an extent
that is not inline or is compressed. We can just make send fail with
an error (-EUCLEAN) and log an informative error message, so just do
that instead of BUG_ON().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When dropping inode items from a log tree at drop_inode_items(), we this
BUG_ON() on the result of btrfs_search_slot() because we don't expect an
exact match since having a key with an offset of (u64)-1 is unexpected.
That is generally true, but for dir index keys for example, we can get a
key with such an offset value, even though it's very unlikely and it would
take ages to increase the sequence counter for a dir index up to (u64)-1.
We can deal with an exact match, we just have to delete the key at that
slot, so there is really no need to BUG_ON(), error out or trigger any
warning. So remove the BUG_ON().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There's no need to BUG_ON() at split_item() if the leaf does not have
enough free space for the new item, we can just return -ENOSPC since
the caller can deal with errors from split_item(). Also, as this is a
very unlikely condition to happen, because the caller has invoked
setup_leaf_for_split() before calling split_item(), surround the
condition with a WARN_ON() which makes it easier to notice this
unexpected condition and tags the if branch with 'unlikely' as well.

I've actually once hit this BUG_ON() with some incorrect code changes
I had, which was very inconvenient as it required rebooting the VM.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At btrfs_del_ptr(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release all
resources in the context of all callers, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.

This implies btrfs_del_ptr() return an int instead of void, and making all
callers check for returned errors.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At insert_ptr(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release all
resources in the context of all callers, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.

This implies making insert_ptr() return an int instead of void, and making
all callers check for returned errors.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At insert_new_root(), instead of doing a BUG_ON() in case we fail to
record the tree mod log operation, just return the error to the callers
after releasing the allocated tree block. At this point we haven't made
any changes to the b+tree, so we haven't left it in an inconsistent state
and therefore have no need to abort the transaction. All we need to do is
to unlock and free the extent buffer we just allocated with the purpose
of making it the new root.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At push_nodes_for_insert(), instead of doing a BUG_ON() in case we fail to
record tree mod log operations, do a transaction abort and return the
error to the caller. There's really no need for the BUG_ON() as we can
release all resources in this context, and we have to abort because other
future tree searches that use the tree mod log (btrfs_search_old_slot())
may get inconsistent results if other operations modify the tree after
that failure and before the tree mod log based search.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At update_ref_for_cow() we are calling btrfs_handle_fs_error() if we find
that the extent buffer has an unexpected ref count of zero, however we can
simply use btrfs_abort_transaction(), which achieves the same purposes: to
turn the fs to error state, abort the current transaction and turn the fs
to RO mode as well. Besides that, btrfs_abort_transaction() also prints a
stack trace which makes it more useful.

Also, as this is a very unexpected situation, indicating a serious
corruption/inconsistency, tag the if branch as 'unlikely', set the error
code to -EUCLEAN instead of -EROFS, and log an explicit message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At balance_level() we are calling btrfs_handle_fs_error() when the middle
child only has 1 item and the left child is missing, however we can simply
use btrfs_abort_transaction(), which achieves the same purposes: to turn
the fs to error state, abort the current transaction and turn the fs to
RO mode. Besides that, btrfs_abort_transaction() also prints a stack trace
which makes it more useful.

Also, as this is a highly unexpected case and it's about a b+tree
inconsistency, change the error code from -EROFS to -EUCLEAN, tag the if
branch as 'unlikely' and log an explicit error message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At balance_level(), when trying to promote a child node to a root node, if
we fail to read the child we call btrfs_handle_fs_error(), which turns the
fs to RO mode and sets it to error state as well, causing any ongoing
transaction to abort. This however is not necessary because at that point
we have not made any change yet at balance_level(), so any error reading
the child node does not leaves us in any inconsistent state. Therefore we
can just return the error to the caller.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At balance_level() we have this 'enospc' label where we jump to in case
we get an error at several places. However that error is certainly not
-ENOSPC in call cases, it can be -EIO or -ENOMEM when reading a child
extent buffer for example, or -ENOMEM when trying to record tree mod log
operations. So to make this less confusing, rename the label to 'out'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At balance_level(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release
all resources in this context, and we have to abort because other future
tree searches that use the tree mod log (btrfs_search_old_slot()) may get
inconsistent results if other operations modify the tree after that
failure and before the tree mod log based search.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At __btrfs_cow_block(), instead of doing a BUG_ON() in case we fail to
record a tree mod log root insertion operation, do a transaction abort
instead. There's really no need for the BUG_ON(), we can properly
release all resources in this context and turn the filesystem to RO mode
and in an error state instead.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When logging tree mod log operations we start by checking, in a lockless
manner, if we need to log - if we don't, we just return and do nothing,
otherwise we will allocate one or more tree mod log operations and then
check again if we need to log. This second check will take the tree mod
log lock in write mode if we need to log, otherwise it will do nothing
and we just free the allocated memory and return success.

We can improve on this by not returning an error in case the memory
allocations fail, unless the second check tells us that we actually need
to log. That is, if we fail to allocate memory and the second check tells
use that we don't need to log, we can just return success and avoid
returning -ENOMEM to the caller. Currently tree mod log failures are
dealt with either a BUG_ON() or a transaction abort, as tree mod log
operations are logged in code paths that modify a b+tree.

So just avoid failing with -ENOMEM if we fail to allocate a tree mod log
operation unless we actually need to log the operations, that is, if
tree_mod_dont_log() returns true.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At split_node(), if we fail to log the tree mod log copy operation, we
return without unlocking the split extent buffer we just allocated and
without decrementing the reference we own on it. Fix this by unlocking
it and decrementing the ref count before returning.

Fixes: 5de865ee ("Btrfs: fix tree mod logging")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When COWing an extent buffer that is not the root node, we need to log in
the tree mod log that we replaced a pointer in the parent node, otherwise
a tree mod log user doing a search on the b+tree can return incorrect
results (that miss something). We are doing the call to
btrfs_tree_mod_log_insert_key() but we totally ignore its return value.

So fix this by adding the missing error handling, resulting in a
transaction abort and freeing the COWed extent buffer.

Fixes: f230475e ("Btrfs: put all block modifications into the tree mod log")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>