pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shahed Shaikh <shshaikh@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Veerasenareddy Burru <vburru@marvell.com>
Cc: Abhijit Ayarekar <aayarekar@marvell.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Also note that the driver only called these for NX_IS_REVISION_P3 devices,
so since f26e58bf, error reporting has been enabled for devices other
than NX_IS_REVISION_P3.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Rahul Verma <rahulv@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Raju Rangoju <rajur@chelsio.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

cd709aa9 ("bnx2: Add PCI Advanced Error Reporting support.") added
pci_enable_pcie_error_reporting() for all devices, and c239f279 ("bnx2:
Enable AER on PCIE devices only") restricted it to BNX2_CHIP_5709 devices
to avoid an error message when it failed on non-PCIe devices.  The PCI core
only enables PCIe error reporting on PCIe devices, which I assume means
BNX2_CHIP_5709.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration,  so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages.  Since f26e58bf ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device.  An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chris Snook <chris.snook@gmail.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/all/20230307163041.3815-8-wsa+renesas@sang-engineering.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says:

====================
pull-request: bpf-next 2023-03-08

We've added 23 non-merge commits during the last 2 day(s) which contain
a total of 28 files changed, 414 insertions(+), 104 deletions(-).

The main changes are:

1) Add more precise memory usage reporting for all BPF map types,
   from Yafang Shao.

2) Add ARM32 USDT support to libbpf, from Puranjay Mohan.

3) Fix BTF_ID_LIST size causing problems in !CONFIG_DEBUG_INFO_BTF,
   from Nathan Chancellor.

4) IMA selftests fix, from Roberto Sassu.

5) libbpf fix in APK support code, from Daniel Müller.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
  selftests/bpf: Fix IMA test
  libbpf: USDT arm arg parsing support
  libbpf: Refactor parse_usdt_arg() to re-use code
  libbpf: Fix theoretical u32 underflow in find_cd() function
  bpf: enforce all maps having memory usage callback
  bpf: offload map memory usage
  bpf, net: xskmap memory usage
  bpf, net: sock_map memory usage
  bpf, net: bpf_local_storage memory usage
  bpf: local_storage memory usage
  bpf: bpf_struct_ops memory usage
  bpf: queue_stack_maps memory usage
  bpf: devmap memory usage
  bpf: cpumap memory usage
  bpf: bloom_filter memory usage
  bpf: ringbuf memory usage
  bpf: reuseport_array memory usage
  bpf: stackmap memory usage
  bpf: arraymap memory usage
  bpf: hashtab memory usage
  ...
====================

Link: https://lore.kernel.org/r/20230308193533.1671597-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 62622dab ("ima: return IMA digest value only when IMA_COLLECTED
flag is set") caused bpf_ima_inode_hash() to refuse to give non-fresh
digests. IMA test #3 assumed the old behavior, that bpf_ima_inode_hash()
still returned also non-fresh digests.

Correct the test by accepting both cases. If the samples returned are 1,
assume that the commit above is applied and that the returned digest is
fresh. If the samples returned are 2, assume that the commit above is not
applied, and check both the non-fresh and fresh digest.

Fixes: 62622dab ("ima: return IMA digest value only when IMA_COLLECTED flag is set")
Reported-by: David Vernet <void@manifault.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/bpf/20230308103713.1681200-1-roberto.sassu@huaweicloud.com

Commit 0091bfc8 ("io_uring/af_unix: defer registered
files gc to io_uring release") added one bit to struct sk_buff.

This structure is critical for networking, and we try very hard
to not add bloat on it, unless absolutely required.

For instance, we can use a specific destructor as a wrapper
around unix_destruct_scm(), to identify skbs that unix_gc()
has to special case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
Add support for TC flower templates in Sparx5

This adds support for the TC template mechanism in the Sparx5 flower filter
implementation.

Templates are as such handled by the TC framework, but when a template is
created (using a chain id) there are by definition no filters on this
chain (an error will be returned if there are any).

If the templates chain id is one that is represented by a VCAP lookup, then
when the template is created, we know that it is safe to use the keys
provided in the template to change the keyset configuration for the (port,
lookup) combination, if this is needed to improve the match on the
template.

The original port keyset configuration is captured in the template state
information which is kept per port, so that when the template is deleted
the port keyset configuration can be restored to its previous setting.

The template also provides the protocol parameter which is the basic
information that is used to find out which port keyset configuration needs
to be changed.

The VCAPs and lookups are slightly different when it comes to which keys,
keysets and protocol are supported and used for selection, so in some
cases a bit of tweaking is needed to find a useful match.  This is done by
e.g. removing a key that prevents the best matching keyset from being
selected.

The debugfs output that is provided for a port allows inspection of the
currently used keyset in each of the VCAPs lookups.  So when a template has
been created the debugfs output allows you to verify if the keyset
configuration has been changed successfully.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for using the "template add" and "template destroy"
functionality to change the port keyset configuration.

If the VCAP lookup already contains rules, the port keyset is left
unchanged, as a change would make these rules unusable.

When the template is destroyed the port keyset configuration is restored.
The filters using the template chain will automatically be deleted by the
TC framework.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With this its is now possible for clients (like TC) to change the port
keyset configuration in the Sparx5 VCAPs.

This is typically done per traffic class which is guided with the L3
protocol information.
Before the change the current keyset configuration is collected in a list
that is handed back to the client.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a list that is used to collect the templates that are active on a
port.

This allows the template creation to change the port configuration
and the template destruction to change it back.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides these 3 functions in the VCAP API:

- Count the number of rules in a VCAP lookup (chain)
- Remove a key from a VCAP rule
- Find the keyset that gives the smallest rule list from a list of keysets
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct the name used in the debugfs output.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The line endings must be preserved on gpio-controller, io-supply, and
reset-gpios properties to look proper when the YAML file is parsed.

Currently it's interpreted as a single line when parsed. Change the style
of the description of these properties to literal style to preserve the
line endings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

No functional modification involved.

drivers/net/ethernet/emulex/benet/be_cmds.c:1120 be_cmd_pmac_add() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4396Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.

Transform zero-length array into flexible-array member in struct
mlx4_en_rx_desc.

Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:88:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:149:30: warning: array subscript 0 is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:127:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:128:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:129:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:117:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:119:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/264
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: disable ASPM during NAPI poll

This is a rework of ideas from Kai-Heng on how to avoid the known
ASPM issues whilst still allowing for a maximum of ASPM-related power
savings. As a prerequisite some locking is added first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that  ASPM is disabled during NAPI poll, we can remove all ASPM
restrictions. This allows for higher power savings if the network
isn't fully loaded.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several chip versions have problems with ASPM, what may result in
rx_missed errors or tx timeouts. The root cause isn't known but
experience shows that disabling ASPM during NAPI poll can avoid
these problems.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bail out if the function is used with chip versions that don't support
ASPM configuration. In addition remove the delay, it tuned out that
it's not needed, also vendor driver r8125 doesn't have it.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For disabling ASPM during NAPI poll we'll have to unlock access
to the config registers in atomic context. Other code parts
running with config register access unlocked are partially
longer and can sleep. Add a usage counter to enable parallel
execution of code parts requiring unlocked config registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For disabling ASPM during NAPI poll we'll have to access both registers
in atomic context. Use a spinlock to protect access.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For disabling ASPM during NAPI poll we'll have to access mac ocp
registers in atomic context. This could result in races because
a mac ocp read consists of a write to register OCPDR, followed
by a read from the same register. Therefore add a spinlock to
protect access to mac ocp registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the feature was added it was enabled for SW timestamps only but
with current hardware the same out-of-order timestamps can be seen.
Let's expand the area for the feature to all types of timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.

Transform zero-length array into flexible-array member in struct
nx_cardrsp_rx_ctx_t.

Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/265
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@workSigned-off-by: Jakub Kicinski <kuba@kernel.org>

lan95xx_config_aneg_ext() can be simplified by using phy_set_bits().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/3da785c7-3ef8-b5d3-89a0-340f550be3c2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

enum skb_drop_reason is more generic, we can adopt it instead.

Provide dev_kfree_skb_irq_reason() and dev_kfree_skb_any_reason().

This means drivers can use more precise drop reasons if they want to.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20230306204313.10492-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

cond sometimes is (val & MASK) what may result in a false positive
if val is a negative errno. We shouldn't evaluate cond if val < 0.
This has no functional impact here, but it's not nice.
Therefore switch order of the checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6d8274ac-4344-23b4-d9a3-cad4c39517d4@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Puranjay Mohan says:

====================

This series add the support of the ARM architecture to libbpf USDT. This
involves implementing the parse_usdt_arg() function for ARM.

It was seen that the last part of parse_usdt_arg() is repeated for all architectures,
so, the first patch in this series refactors these functions and moved the post
processing to parse_usdt_spec()

Changes in V2[1] to V3:

- Use a tabular approach to find register offsets.
- Add the patch for refactoring parse_usdt_arg()
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Parsing of USDT arguments is architecture-specific; on arm it is
relatively easy since registers used are r[0-10], fp, ip, sp, lr,
pc. Format is slightly different compared to aarch64; forms are

- "size @ [ reg, #offset ]" for dereferences, for example
  "-8 @ [ sp, #76 ]" ; " -4 @ [ sp ]"
- "size @ reg" for register values; for example
  "-4@r0"
- "size @ #value" for raw values; for example
  "-8@#1"

Add support for parsing USDT arguments for ARM architecture.

To test the above changes QEMU's virt[1] board with cortex-a15
CPU was used. libbpf-bootstrap's usdt example[2] was modified to attach
to a test program with DTRACE_PROBE1/2/3/4... probes to test different
combinations.

[1] https://www.qemu.org/docs/master/system/arm/virt.html
[2] https://github.com/libbpf/libbpf-bootstrap/blob/master/examples/c/usdt.bpf.cSigned-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307120440.25941-3-puranjay12@gmail.com