Merge tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "A batch of MM (and one non-MM) hotfixes.

  Ten are cc:stable and the remainder address post-6.7 issues or aren't
  considered appropriate for backporting"

* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
  mm/damon/lru_sort: fix quota status loss due to online tunings
  mm/damon/reclaim: fix quota stauts loss due to online tunings
  MAINTAINERS: mailmap: update Shakeel's email address
  mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
  mm: memcontrol: clarify swapaccount=0 deprecation warning
  mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
  mm/zswap: invalidate duplicate entry when !zswap_enabled
  lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
  mm/swap: fix race when skipping swapcache
  mm/swap_state: update zswap LRU's protection range with the folio locked
  selftests/mm: uffd-unit-test check if huge page size is 0
  mm/damon/core: check apply interval in damon_do_apply_schemes()
  mm: zswap: fix missing folio cleanup in writeback race path

Merge tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Stable fixes for 3 DM targets (integrity, verity and crypt) to
   address systemic failure that can occur if user provided pages map to
   the same block.

 - Fix DM crypt to not allow modifying data that being encrypted for
   authenticated encryption.

 - Fix DM crypt and verity targets to align their respective bvec_iter
   struct members to avoid the need for byte level access (due to
   __packed attribute) that is costly on some arches (like RISC).

* tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt, dm-integrity, dm-verity: bump target version
  dm-verity, dm-crypt: align "struct bvec_iter" correctly
  dm-crypt: recheck the integrity tag after a failure
  dm-crypt: don't modify the data when using authenticated encryption
  dm-verity: recheck the hash after a failure
  dm-integrity: recheck the integrity tag after a failure

Pull drm fixes from Dave Airlie:
 "This is the weekly drm fixes. Non-drivers there is a fbdev/sparc fix,
  syncobj, ttm and buddy fixes.

  On the driver side, ivpu, meson, i915 have a small fix each. Then
  amdgpu and xe have a bunch. Nouveau has some minor uapi additions to
  give userspace some useful info along with a Kconfig change to allow
  the new GSP firmware paths to be used by default on the GPUs it
  supports.

  Seems about the usual amount for this time of release cycle.

  fbdev:
   - fix sparc undefined reference

  syncobj:
   - fix sync obj fence waiting
   - handle NULL fence in syncobj eventfd code

  ttm:
   - fix invalid free

  buddy:
   - fix list handling
   - fix 32-bit build

  meson:
   - don't remove bridges from other drivers

  nouveau:
   - fix build warnings
   - add two minor info parameters
   - add a Kconfig to allow GSP by default on some GPUs

  ivpu:
   - allow fw to do initial tile config

  i915:
   - fix TV mode

  amdgpu:
   - Suspend/resume fixes
   - Backlight error fix
   - DCN 3.5 fixes
   - Misc fixes

  xe:
   - Remove support for persistent exec_queues
   - Drop a reduntant sysfs newline printout
   - A three-patch fix for a VM_BIND rebind optimization path
   - Fix a modpost warning on an xe KUNIT module"

* tag 'drm-fixes-2024-02-23' of git://anongit.freedesktop.org/drm/drm: (27 commits)
  nouveau: add an ioctl to report vram usage
  nouveau: add an ioctl to return vram bar size.
  nouveau/gsp: add kconfig option to enable GSP paths by default
  drm/amdgpu: Fix the runtime resume failure issue
  drm/amd/display: fix null-pointer dereference on edid reading
  drm/amd/display: Fix memory leak in dm_sw_fini()
  drm/amd/display: fix input states translation error for dcn35 & dcn351
  drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
  drm/amd/display: Only allow dig mapping to pwrseq in new asic
  drm/amd/display: adjust few initialization order in dm
  drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
  drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
  drm/ttm: Fix an invalid freeing on already freed page in error path
  sparc: Fix undefined reference to fb_is_primary_device
  drm/xe: Fix modpost warning on xe_mocs kunit module
  drm/xe/xe_gt_idle: Drop redundant newline in name
  drm/xe: Return 2MB page size for compact 64k PTEs
  drm/xe: Add XE_VMA_PTE_64K VMA flag
  drm/xe: Fix xe_vma_set_pte_size
  drm/xe/uapi: Remove support for persistent exec_queues
  ...

Pull ata fixes from Niklas Cassel:

 - Do not try to set a sleeping device to standby. Sleep is a deeper
   sleep state than standby, and needs a reset to wake up the drive. A
   system resume will reset the port. Sending a command other than reset
   to a sleeping device is not wise, as the command will timeout (Damien
   Le Moal)

 - Do not try to put a device to standby twice during system shutdown.
   ata_dev_power_set_standby() is currently called twice during
   shutdown, once after the scsi device is removed, and another when
   ata_pci_shutdown_one() executes. Modify ata_dev_power_set_standby()
   to do nothing if the device is already in standby (Damien Le Moal)

 - Add a quirk for ASM1064 to fixup the number of implemented ports. We
   probe all ports that the hardware reports to be implemented. Probing
   ports that are not implemented causes significantly increased boot
   time (Andrey Jr. Melnikov)

 - Fix error handling for the ahci_ceva driver. Ensure that the
   ahci_ceva driver does a proper cleanup of its resources in the error
   path (Radhey Shyam Pandey)

* tag 'ata-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: libata-core: Do not call ata_dev_power_set_standby() twice
  ata: ahci_ceva: fix error handling for Xilinx GT PHY support
  ahci: asm1064: correct count of reported ports
  ata: libata-core: Do not try to set sleeping devices to standby

Pull gpio fix from Bartosz Golaszewski:

 - fix a use-case where no pins are mapped to GPIOs in
   gpiochip_generic_config()

* tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Handle no pin_ranges in gpiochip_generic_config()

Merge tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix a global-out-of-bounds bug in nct6775 driver"

* tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix access to temperature configuration registers

This reports the currently used vram allocations.

userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This returns the BAR resources size so userspace can make
decisions based on rebar support.

userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Turing and Ampere will continue to use the old paths by default,
but we should allow distros to decide what the policy is.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214040632.661069-1-airlied@gmail.com

UAPI Changes:
- Remove support for persistent exec_queues
- Drop a reduntant sysfs newline printout

Cross-subsystem Changes:

Core Changes:

Driver Changes:
- A three-patch fix for a VM_BIND rebind optimization path
- Fix a modpost warning on an xe KUNIT module
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdcsNrxdWMMM417v@fedora

Merge tag 'amd-drm-fixes-6.8-2024-02-22' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.8-2024-02-22:

amdgpu:
- Suspend/resume fixes
- Backlight error fix
- DCN 3.5 fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222195338.5809-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2024-02-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fixup for TV mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdcwT9kltvEgJZZE@jlahtine-mobl.ger.corp.intel.com

A list handling fix and 64bit division on 32bit platform fix for the
drm/buddy allocator, a cast warning and an initialization fix for
nouveau, a bridge handling fix for meson, an initialisation fix for
ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two
fence handling fixes for syncobj.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/gl2antuifidtzn3dfm426p7xwh5fxj23behagwh26owfnosh2w@gqoa7vj5prnh

Pull block fixes from Jens Axboe:
 "Mostly just fixlets for md, but also a sed-opal parsing fix"

* tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux:
  block: sed-opal: handle empty atoms when parsing response
  md: Don't suspend the array for interrupted reshape
  md: Don't register sync_thread for reshape directly
  md: Make sure md_do_sync() will set MD_RECOVERY_DONE
  md: Don't ignore read-only array in md_check_recovery()
  md: Don't ignore suspended array in md_check_recovery()
  md: Fix missing release of 'active_io' for flush

Pull iommufd fixes from Jason Gunthorpe:

 - Fix dirty tracking bitmap collection when using reporting bitmaps
   that are not neatly aligned to u64's or match the IO page table radix
   tree layout.

 - Add self tests to cover the cases that were found to be broken.

 - Add missing enforcement of invalidation type in the uapi.

 - Fix selftest config generation

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  selftests/iommu: fix the config fragment
  iommufd: Reject non-zero data_type if no data_len is provided
  iommufd/iova_bitmap: Consider page offset for the pages to be pinned
  iommufd/selftest: Add mock IO hugepages tests
  iommufd/selftest: Hugepage mock domain support
  iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
  iommufd/selftest: Refactor dirty bitmap tests
  iommufd/iova_bitmap: Handle recording beyond the mapped pages
  iommufd/selftest: Test u64 unaligned bitmaps
  iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
  iommufd/iova_bitmap: Bounds check mapped::pages access

Merge tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Regression fixes:

   - Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI
     changes

   - AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend

   - x86-android-tablets: Fix touchscreen no longer working on Lenovo
     Yogabook

   - x86-android-tablets: Fix serdev instantiation regression

   - intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending

  Bug fixes:

   - think-lmi: Fix changing BIOS settings on Lenovo workstations

   - touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing

   - AMD-PMF: Fix Smart PC support not working after suspend/resume

  Other misc small fixes"

* tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Only update profile if successfully converted
  platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
  platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
  platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
  platform/x86: Add new get_serdev_controller() helper
  platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
  platform/x86/amd/pmf: Fix a potential race with policy binary sideload
  platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
  platform/x86/amd/pmf: Add debugging message for missing policy data
  platform/x86/amd/pmf: Fix a suspend hang on Framework 13
  platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
  platform/x86/amd/pmf: Remove smart_pc_status enum
  platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
  platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
  platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
  platform/x86: think-lmi: Fix password opcode ordering for workstations

Pull clk fixes from Stephen Boyd:
 "Here are some Samsung clk driver fixes I've been sitting on for far
  too long.

  They fix the bindings and clk driver for the Google GS101 SoC"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
  dt-bindings: clock: gs101: rename cmu_misc clock-names

Pull vfs fixes from Christian Brauner:

 - Fix a memory leak in cachefiles

 - Restrict aio cancellations to I/O submitted through the aio
   interfaces as this is otherwise causing issues for I/O submitted
   via io_uring

 - Increase buffer for afs volume status to avoid overflow

 - Fix a missing zero-length check in unbuffered writes in the
   netfs library. If generic_write_checks() returns zero make
   netfs_unbuffered_write_iter() return right away

 - Prevent a leak in i_dio_count caused by netfs_begin_read() operating
   past i_size. It will return early and leave i_dio_count incremented

 - Account for ipv4 addresses as well as ipv6 addresses when processing
   incoming callbacks in afs

* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
  afs: Increase buffer size in afs_update_volume_status()
  afs: Fix ignored callbacks over ipv4
  cachefiles: fix memory leak in cachefiles_add_cache()
  netfs: Fix missing zero-length check in unbuffered write
  netfs: Fix i_dio_count leak on DIO read past i_size

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - af_unix: fix another unix GC hangup

  Previous releases - regressions:

   - core: fix a possible AF_UNIX deadlock

   - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()

   - netfilter: nft_flow_offload: release dst in case direct xmit path
     is used

   - bridge: switchdev: ensure MDB events are delivered exactly once

   - l2tp: pass correct message length to ip6_append_data

   - dccp/tcp: unhash sk from ehash for tb2 alloc failure after
     check_estalblished()

   - tls: fixes for record type handling with PEEK

   - devlink: fix possible use-after-free and memory leaks in
     devlink_init()

  Previous releases - always broken:

   - bpf: fix an oops when attempting to read the vsyscall page through
     bpf_probe_read_kernel

   - sched: act_mirred: use the backlog for mirred ingress

   - netfilter: nft_flow_offload: fix dst refcount underflow

   - ipv6: sr: fix possible use-after-free and null-ptr-deref

   - mptcp: fix several data races

   - phonet: take correct lock to peek at the RX queue

  Misc:

   - handful of fixes and reliability improvements for selftests"

* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  l2tp: pass correct message length to ip6_append_data
  net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
  selftests: ioam: refactoring to align with the fix
  Fix write to cloned skb in ipv6_hop_ioam()
  phonet/pep: fix racy skb_queue_empty() use
  phonet: take correct lock to peek at the RX queue
  net: sparx5: Add spinlock for frame transmission from CPU
  net/sched: flower: Add lock protection when remove filter handle
  devlink: fix port dump cmd type
  net: stmmac: Fix EST offset for dwmac 5.10
  tools: ynl: don't leak mcast_groups on init error
  tools: ynl: make sure we always pass yarg to mnl_cb_run
  net: mctp: put sock on tag allocation failure
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
  selftests: tls: add test for peeking past a record of a different type
  selftests: tls: add test for merging of same-type control messages
  ...

Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.

Fixes: 3a9626c8 ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:

[  +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[  +0.000010] #PF: supervisor read access in kernel mode
[  +0.000005] #PF: error_code(0x0000) - not-present page
[  +0.000004] PGD 0 P4D 0
[  +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[  +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[  +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[  +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[  +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[  +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[  +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[  +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[  +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[  +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[  +0.000004] FS:  00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[  +0.000003] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000006]  <TASK>
[  +0.000006]  ? __die+0x23/0x70
[  +0.000011]  ? page_fault_oops+0x17d/0x4c0
[  +0.000008]  ? preempt_count_add+0x6e/0xa0
[  +0.000008]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000011]  ? exc_page_fault+0x7f/0x180
[  +0.000009]  ? asm_exc_page_fault+0x26/0x30
[  +0.000013]  ? i2c_transfer+0xd/0x100
[  +0.000010]  drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[  +0.000067]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000006]  ? _drm_do_get_edid+0x97/0x3c0 [drm]
[  +0.000043]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000042]  edid_block_read+0x3b/0xd0 [drm]
[  +0.000043]  _drm_do_get_edid+0xb6/0x3c0 [drm]
[  +0.000041]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000043]  drm_edid_read_custom+0x37/0xd0 [drm]
[  +0.000044]  amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[  +0.000153]  drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[  +0.000000]  __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[  +0.000000]  ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[  +0.000000]  status_store+0xb2/0x1f0 [drm]
[  +0.000000]  kernfs_fop_write_iter+0x136/0x1d0
[  +0.000000]  vfs_write+0x24d/0x440
[  +0.000000]  ksys_write+0x6f/0xf0
[  +0.000000]  do_syscall_64+0x60/0xc0
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? syscall_exit_to_user_mode+0x2b/0x40
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  +0.000000] RIP: 0033:0x7f9ad46b4b00
[  +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[  +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[  +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[  +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[  +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[  +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[  +0.000000]  </TASK>
[  +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[  +0.000000]  snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[  +0.000000]  usb_common crct10dif_common video wmi
[  +0.000000] CR2: 00000000000004c0
[  +0.000000] ---[ end trace 0000000000000000 ]---

Fixes: 0e859faf ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:

unreferenced object 0xffff896302b45800 (size 1024):
  comm "(udev-worker)", pid 222, jiffies 4294894636
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 6265fd77):
    [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
    [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
    [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
    [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
    [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
    [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
    [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
    [<ffffffff996918a3>] pci_device_probe+0xc3/0x230
    [<ffffffff99805872>] really_probe+0xe2/0x480
    [<ffffffff99805c98>] __driver_probe_device+0x78/0x160
    [<ffffffff99805daf>] driver_probe_device+0x1f/0x90
    [<ffffffff9980601e>] __driver_attach+0xce/0x1c0
    [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
    [<ffffffff99804822>] bus_add_driver+0x112/0x210
    [<ffffffff99807245>] driver_register+0x55/0x100
    [<ffffffff990012d1>] do_one_initcall+0x41/0x300

Fix this by freeing dmub_srv after destroying it.

Fixes: 743b9786 ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.

[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.

In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.

Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.

Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)

Fixes: 028bac58 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb7 ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull tracing fix from Steven Rostedt:

 - While working on the ring buffer I noticed that the counter used for
   knowing where the end of the data is on a sub-buffer was not a full
   "int" but just 20 bits. It was masked out to 0xfffff.

   With the new code that allows the user to change the size of the
   sub-buffer, it is theoretically possible to ask for a size bigger
   than 2^20. If that happens, unexpected results may occur as there's
   no code checking if the counter overflowed the 20 bits of the write
   mask. There are other checks to make sure events fit in the
   sub-buffer, but if the sub-buffer itself is too big, that is not
   checked.

   Add a check in the resize of the sub-buffer to make sure that it
   never goes beyond the size of the counter that holds how much data is
   on it.

* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not let subbuf be bigger than write mask

[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.

[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component

Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:

1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.

2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence

[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.

Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()

Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.

➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST

While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.

Fixes: 57f09887 ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.comSigned-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set
the fence to NULL if the given seqno is signaled and a later seqno has
already been submitted. In that case, the eventfd should be signaled
immediately which currently does not happen.

This is a similar issue to the one addressed by commit b19926d4
("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.").

As a fix, if the return value of dma_fence_chain_find_seqno indicates
success but it sets the fence to NULL, we will assign a stub fence to
ensure the following code still signals the eventfd.

v1 -> v2: assign a stub fence instead of signaling the eventfd
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Fixes: c7a47229 ("drm/syncobj: add IOCTL to register an eventfd")
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221184527.37667-1-ekurzinger@nvidia.com

When waiting for a syncobj timeline point whose fence has not yet been
submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using
drm_syncobj_fence_add_wait and the thread is put to sleep until the
timeout expires. If the fence is submitted before then,
drm_syncobj_add_point will wake up the sleeping thread immediately which
will proceed to wait for the fence to be signaled.

However, if the WAIT_AVAILABLE flag is used instead,
drm_syncobj_fence_add_wait won't get called, meaning the waiting thread
will always sleep for the full timeout duration, even if the fence gets
submitted earlier. If it turns out that the fence *has* been submitted
by the time it eventually wakes up, it will still indicate to userspace
that the wait completed successfully (it won't return -ETIME), but it
will have taken much longer than it should have.

To fix this, we must call drm_syncobj_fence_add_wait if *either* the
WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only
difference being that with WAIT_FOR_SUBMIT we will also wait for the
fence to be signaled after it has been submitted while with
WAIT_AVAILABLE we will return immediately.

IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html

v1 -> v2: adjust lockdep_assert_none_held_once condition

(cherry picked from commit 8c44ea81)

Fixes: 01d6c357 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com

If caching mode change fails due to, for example, OOM we
free the allocated pages in a two-step process. First the pages
for which the caching change has already succeeded. Secondly
the pages for which a caching change did not succeed.

However the second step was incorrectly freeing the pages already
freed in the first step.

Fix.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 379989e7 ("drm/ttm/pool: Fix ttm_pool_alloc error path")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221073324.3303-1-thomas.hellstrom@linux.intel.com

l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.

To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.

However, the code which performed the calculation was incorrect:

     ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;

...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.

Add parentheses to correct the calculation in line with the original
intent.

Fixes: 9d4c7580 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) If user requests to wake up a table and hook fails, restore the
   dormant flag from the error path, from Florian Westphal.

2) Reset dst after transferring it to the flow object, otherwise dst
   gets released twice from the error path.

3) Release dst in case the flowtable selects a direct xmit path, eg.
   transmission to bridge port. Otherwise, dst is memleaked.

4) Register basechain and flowtable hooks at the end of the command.
   Error path releases these datastructure without waiting for the
   rcu grace period.

5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
   on access to hook type, also from Florian Westphal.

netfilter pull request 24-02-22

* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
====================

Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Daniel Borkmann says:

====================
pull-request: bpf 2024-02-22

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).

The main changes are:

1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
   page through bpf_probe_read_kernel and friends, from Hou Tao.

2) Fix a kernel panic due to uninitialized iter position pointer in
   bpf_iter_task, from Yafang Shao.

3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
   from Martin KaFai Lau.

4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
   due to incorrect truesize accounting, from Sebastian Andrzej Siewior.

5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
   from Shigeru Yoshida.

6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
   resolved, from Hari Bathini.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
  selftests/bpf: Add negtive test cases for task iter
  bpf: Fix an issue due to uninitialized bpf_iter_task
  selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  selftest/bpf: Test the read of vsyscall page under x86-64
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  bpf, scripts: Correct GPL license name
  xsk: Add truesize to skb_add_rx_frag().
  bpf: Fix warning for bpf_cpumask in verifier
====================

Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit bb726b75 ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.

While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.

As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.

Fixes: bb726b75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Justin Iurman says:

====================
ioam6: fix write to cloned skb's

Make sure the IOAM data insertion is not applied on cloned skb's. As a
consequence, ioam selftests needed a refactoring.
====================

Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.beSigned-off-by: Paolo Abeni <pabeni@redhat.com>

ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().

Fixes: 9ee11f0f ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The receive queues are protected by their respective spin-lock, not
the socket lock. This could lead to skb_peek() unexpectedly
returning NULL or a pointer to an already dequeued socket buffer.

Fixes: 9641458d ("Phonet: Pipe End Point for Phonet Pipes protocol")
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The receive queue is protected by its embedded spin-lock, not the
socket lock, so we need the former lock here (and only that one).

Fixes: 107d0d9b ("Phonet: Phonet datagram transport protocol")
Reported-by: Luosili <rootlab@huawei.com>
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>