- 18 Jun, 2015 1 commit
-
-
Christian König authored
commit 7c0411d2 upstream. We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
- 17 Jun, 2015 23 commits
-
-
Sriharsha Basavapatna authored
[ Upstream commit e51000db ] There are several places in the driver (all in control paths) where coherent dma memory is being allocated using either dma_alloc_coherent() or the deprecated pci_alloc_consistent(). All these calls should be changed to use dma_zalloc_coherent() to avoid uninitialized fields in data structures backed by this memory. Reported-by:
Joerg Roedel <jroedel@suse.de> Tested-by:
Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 9f950415 ] Linux 3.17 and earlier are explicitly engineered so that if the app doesn't specifically request a CC module on a listener before the SYN arrives, then the child gets the system default CC when the connection is established. See tcp_init_congestion_control() in 3.17 or earlier, which says "if no choice made yet assign the current value set as default". The change ("net: tcp: assign tcp cong_ops when tcp sk is created") altered these semantics, so that children got their parent listener's congestion control even if the system default had changed after the listener was created. This commit returns to those original semantics from 3.17 and earlier, since they are the original semantics from 2007 in 4d4d3d1e ("[TCP]: Congestion control initialization."), and some Linux congestion control workflows depend on that. In summary, if a listener socket specifically sets TCP_CONGESTION to "x", or the route locks the CC module to "x", then the child gets "x". Otherwise the child gets current system default from net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and earlier, and this commit restores that. Fixes: 55d8694f ("net: tcp: assign tcp cong_ops when tcp sk is created") Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit c4c832f8 ] br_fdb_update() can be called in process context in the following way: br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set) so we need to disable softirqs because there are softirq users of the hash_lock. One easy way to reproduce this is to modify the bridge utility to set NTF_USE, enable stp and then set maxageing to a low value so br_fdb_cleanup() is called frequently and then just add new entries in a loop. This happens because br_fdb_cleanup() is called from timer/softirq context. The spin locks in br_fdb_update were _bh before commit f8ae737d ("[BRIDGE]: forwarding remove unneeded preempt and bh diasables") and at the time that commit was correct because br_fdb_update() couldn't be called from process context, but that changed after commit: 292d1398 ("bridge: add NTF_USE support") Using local_bh_disable/enable around br_fdb_update() allows us to keep using the spin_lock/unlock in br_fdb_update for the fast-path. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 292d1398 ("bridge: add NTF_USE support") Signed-off-by:
-
Shawn Bohrer authored
[ Upstream commit 6e540309 ] 421b3885 "udp: ipv4: Add udp early demux" introduced a regression that allowed sockets bound to INADDR_ANY to receive packets from multicast groups that the socket had not joined. For example a socket that had joined 224.168.2.9 could also receive packets from 225.168.2.9 despite not having joined that group if ip_early_demux is enabled. Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify that the multicast packet is indeed ours. Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Reported-by:
Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by:
-
Ian Campbell authored
[ Upstream commit 31a41898 ] When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit beb39db5 ] We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 71d9f614 ] br_multicast_query_expired() querier argument is a pointer to a struct bridge_mcast_querier : struct bridge_mcast_querier { struct br_ip addr; struct net_bridge_port __rcu *port; }; Intent of the code was to clear port field, not the pointer to querier. Fixes: 2cd41431 ("bridge: memorize and export selected IGMP/MLD querier port") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by:
Linus Lüssing <linus.luessing@c0d3.blue> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Steinar H. Gunderson <sesse@samfundet.no> Signed-off-by:
-
Jason Gunthorpe authored
[ Upstream commit 9302d7bb ] sctp_v4_map_v6 was subtly writing and reading from members of a union in a way the clobbered data it needed to read before it read it. Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the result. Reorder things to guarantee correct behaviour no matter what the union layout is. This impacts user space clients that open an IPv6 SCTP socket and receive IPv4 connections. Prior to 299ee user space would see a sockaddr with AF_INET and a correct address, after 299ee the sockaddr is AF_INET6, but the address is wrong. Fixes: 299ee123 (sctp: Fixup v4mapped behaviour to comply with Sock API) Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 86e363dc ] For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Ross Lagerwall authored
[ Upstream commit ce0e5c52 ] Commit e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
-
Mark Salyzyn authored
[ Upstream commit b48732e4 ] got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
[ Upstream commit adbe088f ] A pair of nested spin locks was introduced in commit 63502b8d "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
[ Upstream commit a935865c ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 3f7352bf ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Vlad Yasevich authored
[ Upstream commit d66bf7dd ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Nick Meier authored
commit 5ef5b692 upstream. HV_CRASH_CTL_CRASH_NOTIFY is a 64 bit number. Depending on the usage context, the value may be truncated. This patch is in response from the following email from Wu Fengguang <fengguang.wu@intel.com>: From: Wu Fengguang <fengguang.wu@intel.com> Subject: [char-misc:char-misc-testing 25/45] drivers/hv/vmbus_drv.c:67:9: sparse: constant 0x8000000000000000 is so big it is unsigned long tree: git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-testing head: b3de8e37 commit: 96c1d058 [25/45] Drivers: hv: vmbus: Add support for VMBus panic notifier handler reproduce: # apt-get install sparse git checkout 96c1d058 make ARCH=x86_64 allmodconfig make C=1 CF=-D__CHECK_ENDIAN__ sparse warnings: (new ones prefixed by >>) drivers/hv/vmbus_drv.c:67:9: sparse: constant 0x8000000000000000 is so big it is unsigned long ... Signed-off-by:
Nick Meier <nmeier@microsoft.com> Reported-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Nick Meier authored
commit 96c1d058 upstream. BugLink: http://bugs.launchpad.net/bugs/1463584 Hyper-V allows a guest to notify the Hyper-V host that a panic condition occured. This notification can include up to five 64 bit values. These 64 bit values are written into crash MSRs. Once the data has been written into the crash MSRs, the host is then notified by writing into a Crash Control MSR. On the Hyper-V host, the panic notification data is captured in the Windows Event log as a 18590 event. Crash MSRs are defined in appendix H of the Hypervisor Top Level Functional Specification. At the time of this patch, v4.0 is the current functional spec. The URL for the v4.0 document is: http://download.microsoft.com/download/A/B/4/AB43A34E-BDD0-4FA6-BDEF-79EEF16E880B/Hypervisor Top Level Functional Specification v4.0.docx Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Malcolm Priestley authored
commit 95775d12 upstream. The device must not flip to page 1 while in interrupt lock causing loss of connection or dead lock. Protect from changes to page by adding lock where user can change the page in CARDvSetRSPINF, vnt_configure and set_channel Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit d65d2b25 upstream. The state of m_td0TD0.f1Owner should change after the buff_addr has been filled otherwise the device grabs the buffer too early. m_td0TD0.f1Owner is protected by memory barriers on both sides of change. iTDUsed is best incremented after MACvTransmit. It appears that f1Owner actually polls to do the memory transfer. A back port patch will be needed for v3.19 Signed-off-by:
-
Malcolm Priestley authored
commit c3125305 upstream. There is still a problem that dma_idx is causing packets to go onto the wrong tx path. Protect dma_idx fully with the present first lock and use pTDInfo->byFlags TD_FLAGS_NETIF_SKB to set MACvTransmit. Signed-off-by:
-
Malcolm Priestley authored
commit d17f4c8a upstream. Allow only TD_FLAGS_NETIF_SKB on ring buffer TYPE_AC0DMA for data only transfers for correct reporting of tx rates. Signed-off-by:
-
Malcolm Priestley authored
commit 187e2a81 upstream. Keep setting of this part of the structure with the others. Only pTDInfo needs carried in the buffer structure. Signed-off-by:
-
- 16 Jun, 2015 16 commits
-
-
Florent Fourcot authored
commit 21858cd0 upstream. commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Michal Kubeček authored
commit 27596472 upstream. When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Henning Rogge authored
commit 33b4b015 upstream. Commit <5cf3d461> ("udp: Simplify__udp*_lib_mcast_deliver") simplified the filter for incoming IPv6 multicast but removed the check of the local socket address and the UDP destination address. This patch restores the filter to prevent sockets bound to a IPv6 multicast IP to receive other UDP traffic link unicast. Signed-off-by:
Henning Rogge <hrogge@gmail.com> Fixes: 5cf3d461 ("udp: Simplify__udp*_lib_mcast_deliver") Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
-
Michal Kubeček authored
commit 35f1b4e9 upstream. If adding a nexthop of an IPv6 multipath route fails, comment in ip6_route_multipath() says we are going to delete all nexthops already added. However, current implementation deletes even the routes it hasn't even tried to add yet. For example, running ip route add 1234:5678::/64 \ nexthop via fe80::aa dev dummy1 \ nexthop via fe80::bb dev dummy1 \ nexthop via fe80::cc dev dummy1 twice results in removing all routes first command added. Limit the second (delete) run to nexthops that succeeded in the first (add) run. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
-
Eric W. Biederman authored
commit 381c759d upstream. ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Bjørn Mork authored
commit 44f6731d upstream. The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by:
Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 47cc84ce upstream. When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
-
Florian Fainelli authored
commit 7e140696 upstream. RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
commit b3cad287 upstream. In compliance with RFC5961, the network stack send challenge ACK in response to spurious SYN packets, since commit 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets"). This pose a problem for netfilter conntrack in state LAST_ACK, because this challenge ACK is (falsely) seen as ACKing last FIN, causing a false state transition (into TIME_WAIT). The challenge ACK is hard to distinguish from real last ACK. Thus, solution introduce a flag that tracks the potential for seeing a challenge ACK, in case a SYN packet is let through and current state is LAST_ACK. When conntrack transition LAST_ACK to TIME_WAIT happens, this flag is used for determining if we are expecting a challenge ACK. Scapy based reproducer script avail here: https://github.com/netoptimizer/network-testing/blob/master/scapy/tcp_hacks_3WHS_LAST_ACK.py Fixes: 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Daniel Borkmann authored
commit c78e1746 upstream. Vijay reported that a loop as simple as ... while true; do tc qdisc add dev foo root handle 1: prio tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1 tc qdisc del dev foo root rmmod cls_u32 done ... will panic the kernel. Moreover, he bisected the change apparently introducing it to 78fd1d0a ("netlink: Re-add locking to netlink_lookup() and seq walker"). The removal of synchronize_net() from the netlink socket triggering the qdisc to be removed, seems to have uncovered an RCU resp. module reference count race from the tc API. Given that RCU conversion was done after e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") which added the synchronize_net() originally, occasion of hitting the bug was less likely (not impossible though): When qdiscs that i) support attaching classifiers and, ii) have at least one of them attached, get deleted, they invoke tcf_destroy_chain(), and thus call into ->destroy() handler from a classifier module. After RCU conversion, all classifier that have an internal prio list, unlink them and initiate freeing via call_rcu() deferral. Meanhile, tcf_destroy() releases already reference to the tp->ops->owner module before the queued RCU callback handler has been invoked. Subsequent rmmod on the classifier module is then not prevented since all module references are already dropped. By the time, the kernel invokes the RCU callback handler from the module, that function address is then invalid. One way to fix it would be to add an rcu_barrier() to unregister_tcf_proto_ops() to wait for all pending call_rcu()s to complete. synchronize_rcu() is not appropriate as under heavy RCU callback load, registered call_rcu()s could be deferred longer than a grace period. In case we don't have any pending call_rcu()s, the barrier is allowed to return immediately. Since we came here via unregister_tcf_proto_ops(), there are no users of a given classifier anymore. Further nested call_rcu()s pointing into the module space are not being done anywhere. Only cls_bpf_delete_prog() may schedule a work item, to unlock pages eventually, but that is not in the range/context of cls_bpf anymore. Fixes: 25d8c0d5 ("net: rcu-ify tcf_proto") Fixes: 9888faef ("net: sched: cls_basic use RCU") Reported-by:
Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
commit ed2a80ab upstream. Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e56 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by:
Julien Meunier <julien.meunier@6wind.com> Signed-off-by:
-
Tommi Rantala authored
commit f30bf2a5 upstream. Fix memory leak introduced in commit a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct."): unreferenced object 0xffff88005785b800 (size 2048): comm "(-localed)", pid 1434, jiffies 4294755650 (age 1421.089s) hex dump (first 32 bytes): bb 89 0b 83 ff ff ff ff b0 78 f0 4e 00 88 ff ff .........x.N.... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8262ea8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811fba74>] __kmalloc_track_caller+0x244/0x430 [<ffffffff811b88a0>] kmemdup+0x20/0x50 [<ffffffff823276b7>] ip_vs_control_net_init+0x1f7/0x510 [<ffffffff8231d630>] __ip_vs_init+0x100/0x250 [<ffffffff822363a1>] ops_init+0x41/0x190 [<ffffffff82236583>] setup_net+0x93/0x150 [<ffffffff82236cc2>] copy_net_ns+0x82/0x140 [<ffffffff810ab13d>] create_new_namespaces+0xfd/0x190 [<ffffffff810ab49a>] unshare_nsproxy_namespaces+0x5a/0xc0 [<ffffffff810833e3>] SyS_unshare+0x173/0x310 [<ffffffff8265cbd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff Fixes: a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Harald Freudenberger authored
commit a1cae34e upstream. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Gerald Schaefer <geraldsc@linux.vnet.ibm.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alex Deucher authored
commit 0f28d128 upstream. Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530Signed-off-by:
-
Ilya Dryomov authored
commit 521a04d0 upstream. This reverts commit ba9d114e. .. which introduced a regression that prevented all lingering requests requeued in kick_requests() from ever being sent to the OSDs, resulting in a lot of missed notifies. In retrospect it's pretty obvious that r_req_lru_item item in the case of lingering requests can be used not only for notarget, but also for unsent linkage due to how tightly actual map and enqueue operations are coupled in __map_request(). The assertion that was being silenced is taken care of in the previous ("libceph: request a new osdmap if lingering request maps to no osd") commit: by always kicking homeless lingering requests we ensure that none of them ends up on the notarget list outside of the critical section guarded by request_mutex. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit b0494532 upstream. This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Signed-off-by:
-
