- 23 May, 2005 40 commits
-
-
Nicolas Pitre authored
to make sure the flash is in array mode whenever we're about to reboot. This is especially useful to allow "soft" reboot to work which consists of branching back into the bootloader. Signed-off-by:
Nicolas Pitre <nico@cam.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Todd Poynor authored
Signed-off-by:
Todd Poynor <tpoynor@mvista.com> Signed-off-by:
-
Todd Poynor authored
Skip jiffy delay after each block lock/unlock for Intel CFI flash with the "Instant Individual Block Locking" feature bit set. Signed-off-by:
-
Dan Brown authored
Add a new module param, show_firmware_partition. Signed-off-by:
Dan Brown <dan_brown@ieee.org> Signed-off-by:
-
Artem B. Bityuckiy authored
Signed-off-by:
Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by:
-
Richard Purdie authored
Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Richard Purdie authored
Signed-off-by:
-
Artem B. Bityuckiy authored
Signed-off-by:
-
Artem B. Bityuckiy authored
Signed-off-by:
-
Artem B. Bityuckiy authored
Make sure the erase_pending_wbuf_list's blocks are taken into account when picking the block to GC. Signed-off-by:
-
Thomas Gleixner authored
Use memset instead of ARM only memzero function Signed-off-by: -
Thomas Gleixner authored
Signed-off-by: -
Thomas Gleixner authored
Signed-off-by: -
Artem B. Bityuckiy authored
Use the new NAND_SKIP_BBT option instead of defining a fake scan_bbt handler. Signed-off-by:
-
Lennert Buytenhek authored
Setting the slowport to 8-bit mode is something that ought to be done in the IXP2000 generic code, not in the MTD map driver. See the description for ARM patch 2493/1 for an explanation. http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=2493/1 Now that 2493/1 has been accepted and will be upstream soon, this doesn't need to be done in the map driver anymore. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Domen Puncer authored
Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Artem B. Bityuckiy authored
Use the corresponding function to mark Superblock dirty instead of doing it directly. Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by: -
Ben Dooks authored
Updated with tglx's suggestion to simply the command invocation by simply changing the address of the IO write area Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Signed-off-by:
-
Nicolas Pitre authored
oldstate has to be reset to FL_READY after sync completion. Signed-off-by:
-
Thomas Gleixner authored
The change makes the code endianess aware and replaces the bogus nested loop to or the status flags together. Signed-off-by: -
Thomas Gleixner authored
This is necessary to fix the broken status check in cfi_cmdset_0001 Signed-off-by: -
Ben Dooks authored
removed define of DEBUG removed extraneous debugging code Signed-off-by:
-
Ben Dooks authored
Signed-off-by:
-
Ben Dooks authored
Signed-off-by:
-
Joern Engel authored
Jffs2 apparently needs this. Accept newline at the end of input. Signed-off-by:
Joern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by:
-
Joern Engel authored
- Remove Gareth from the Copyrights (at his own request) - Fix the "fscking embarrassment" Signed-off-by:
-
David Vrabel authored
Remove support for the Arcom Elan-104NC since it's no longer being maintained. Signed-off-by:
David Vrabel <dvrabel@arcom.com> Signed-off-by:
-
Artem B. Bityuckiy authored
Signed-off-by:
-
Thomas Gleixner authored
Replace msleep by cond_resched. On machines with HZ=100 (e.g. ARM) msleep slows down the operation by factor 10 Signed-off-by: -
Artem B. Bityuckiy authored
Fix fairly sad NOR-specific bug - during FS building ic->scan_dents isn't zero, but jffs2_mark_node_obsolete() migt be called it tries to finde the ic corresponding to ref - this requires ic->scan_dents = 0. Signed-off-by:
-
David Woodhouse authored
Don't remove inocache for inodes which are in read_inode() or clear_inode() until they're done. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Pete Popov authored
This driver does not have as many options but it's easier to maintain. And, it turns out AMD never shipped boards with different flash densities. Signed-off-by:
Pete Popov <ppopov@pacbell.net> Signed-off-by:
-
Joern Engel authored
Signed-off-by:
Alexander Nyberg <alexn@dsv.su.se> Signed-off-by:
-
Thomas Gleixner authored
Check timeout while we wait for the command to finish. No worry about a false result. This prevents deadlocking when detecting an unknown number of chips and is useful for removable media too. Signed-off-by:
-
Thomas Gleixner authored
Do not use the ready function here, as it might hang for ever. The result will show, whether the chip is there or not Signed-off-by: -
Ben Dooks authored
Fix sparse errors due to lack of address-space markers Updated header comments Small re-format of initialiser Signed-off-by:
-
Artem B. Bityuckiy authored
Signed-off-by:
-
Ben Dooks authored
update the BAST driver config (which already supports the vr1000) to be selected only if the vr1000 has been configured Signed-off-by:
-
Nicolas Pitre authored
The OTP code is rather broken without this. Signed-off-by:
-
