Add missing headers to the IP entry.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

include/linux/linkmode.h and include/linux/mii.h
do not match anything in MAINTAINERS. Looks like
they should be under Ethernet PHY.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When readl_poll_timeout() timeout, we'd better directly use its return
value.

Before this patch:
[    2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14

After this patch:
[    2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When dumping vlan options for a single net device we send the same
entries infinitely because user-space expects a 0 return at the end but
we keep returning skb->len and restarting the dump on retry. Fix it by
returning the value from br_vlan_dump_dev() if it completed or there was
an error. The only case that must return skb->len is when the dump was
incomplete and needs to continue (-EMSGSIZE).
Reported-by: Benjamin Poirier <bpoirier@nvidia.com>
Fixes: 8dcea187 ("net: bridge: vlan: add rtm definitions and dump support")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mohammad Athari Bin Ismail says:

====================
Fix PTP issue in stmmac

This patch series to fix PTP issue in stmmac related to:
1/ PTP clock source configuration during initialization.
2/ PTP initialization during resume from suspend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.

To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.

Fixes: fe131929 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For Intel platform, it is required to configure PTP clock source prior PTP
initialization in MAC. So, need to move ptp_clk_freq_config execution from
stmmac_ptp_register() to stmmac_init_ptp().

Fixes: 76da35dc ("stmmac: intel: Add PSE and PCH PTP clock source selection")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit b75326c2.

This commit breaks Linux compatibility with USGv6 tests. The RFC this
commit was based on is actually an expired draft: no published RFC
currently allows the new behaviour it introduced.

Without full IETF endorsement, the flash renumbering scenario this
patch was supposed to enable is never going to work, as other IPv6
equipements on the same LAN will keep the 2 hours limit.

Fixes: b75326c2 ("ipv6: Honor all IPv6 PIO Valid Lifetime values")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Leo Yan says:

====================
pid: Introduce helper task_is_in_root_ns()

This patch series introduces a helper function task_is_in_init_pid_ns()
to replace open code.  The two patches are extracted from the original
series [1] for network subsystem.

As a plan, we can firstly land this patch set into kernel 5.18; there
have 5 patches are left out from original series [1], as a next step,
I will resend them for appropriate linux-next merging.

[1] https://lore.kernel.org/lkml/20211208083320.472503-1-leo.yan@linaro.org/
====================

Link: https://lore.kernel.org/r/20220126050427.605628-1-leo.yan@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch replaces open code with task_is_in_init_pid_ns() to check if
a task is in root PID namespace.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the kernel uses open code in multiple places to check if a
task is in the root PID namespace with the kind of format:

  if (task_active_pid_ns(current) == &init_pid_ns)
      do_something();

This patch creates a new helper function, task_is_in_init_pid_ns(), it
returns true if a passed task is in the root PID namespace, otherwise
returns false.  So it will be used to replace open codes.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.

GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Horatiu Vultur says:

====================
net: lan966x: Fixes for sleep in atomic context

This patch series contains 2 fixes for lan966x that is sleeping in atomic
context. The first patch fixes the injection of the frames while the second
one fixes the updating of the MAC table.

v1->v2:
 - correct the fix tag in the second patch, it was using the wrong sha.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The function lan966x_mac_wait_for_completion is used to poll the status
of the MAC table using the function readx_poll_timeout. The problem with
this function is that is called also from atomic context. Therefore
update the function to use readx_poll_timeout_atomic.

Fixes: e18aba89 ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On lan966x, when injecting a frame it was polling the register
QS_INJ_STATUS to see if it can continue with the injection of the frame.
The problem was that it was using readx_poll_timeout which could sleep
in atomic context.
This patch fixes this issue by using readx_poll_timeout_atomic.

Fixes: d28d6d2e ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethernet: fix some esoteric drivers after netdev->dev_addr constification

Looking at recent fixes for drivers which don't get included with
allmodconfig builds I thought it's worth grepping for more instances of:

  dev->dev_addr\[.*\] =

This set contains the fixes.

v2: add last 3 patches which fix drivers for the RiscPC ARM platform.
Thanks to Arnd Bergmann for explaining how to build test that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr is const now.

Compile tested rpc_defconfig w/ GCC 8.5.

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr is const now.

Compile tested rpc_defconfig w/ GCC 8.5.

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr is const now.

Compile tested rpc_defconfig w/ GCC 8.5.

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr is const now.

Compile tested bigsur_defconfig and sb1250_swarm_defconfig.

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev->dev_addr is const now.

Maintain the questionable offsetting in ndo_set_mac_address.

Compile tested holly_defconfig and mpc7448_hpc2_defconfig.

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver casts off the const and writes directly to netdev->dev_addr.
This will result in a MAC address tree corruption and a warning.

Compile tested ppc6xx_defconfig.

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current implementation of HTB offload doesn't support some
parameters. Instead of ignoring them, actively return the EINVAL error
when they are set to non-defaults.

As this patch goes to stable, the driver API is not changed here. If
future drivers support more offload parameters, the checks can be moved
to the driver side.

Note that the buffer and cbuffer parameters are also not supported, but
the tc userspace tool assigns some default values derived from rate and
ceil, and identifying these defaults in sch_htb would be unreliable, so
they are still ignored.

Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220125100654.424570-1-maximmi@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Copy scattered mac address octets into an array then eth_hw_addr_set().

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20220125144007.64407-1-tsbogend@alpha.franken.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since some interrupt states may be cleared by hardware, the driver
may receive an empty interrupt. Currently, the VF driver directly
disables the vector0 interrupt in this case. As a result, the VF
is unavailable. Therefore, the vector0 interrupt should be enabled
in this case.

Fixes: b90fcc5b ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent changes made netdev->dev_addr const, and it's passed
directly to mpc52xx_fec_set_paddr().

Similar problem exists on the probe patch, the driver needs
to call eth_hw_addr_set().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cpsw driver didn't properly initialise the struct page_pool_params
before calling page_pool_create(), which leads to crashes after the struct
has been expanded with new parameters.

The second Fixes tag below is where the buggy code was introduced, but
because the code was moved around this patch will only apply on top of the
commit in the first Fixes tag.

Fixes: c5013ac1 ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv")
Fixes: 9ed4050c ("net: ethernet: ti: cpsw: add XDP support")
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ym needs to be free when ym->cmd != SIOCYAMSMCS.

Fixes: 0781168e ("yam: fix a missing-check bug")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, on EEE capable platforms, if EEE SW timer is used, the SW
timer cause 1 wakeup/s even if the TX has successfully entered EEE.
Remove this unnecessary wakeup by only calling mod_timer() if we
haven't successfully entered EEE.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-01-24

The first patch updates the email address of Brian Silverman from his
former employer to his private address.

The next patch fixes DT bindings information for the tcan4x5x SPI CAN
driver.

The following patch targets the m_can driver and fixes the
introduction of FIFO bulk read support.

Another patch for the tcan4x5x driver, which fixes the max register
value for the regmap config.

The last patch for the flexcan driver marks the RX mailbox support for
the MCF5441X as support.

* tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: flexcan: mark RX via mailboxes as supported on MCF5441X
  can: tcan4x5x: regmap: fix max register value
  can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0
  dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config
  mailmap: update email address of Brian Silverman
====================

Link: https://lore.kernel.org/r/20220124175955.3464134-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox

The flexcan IP core on the MCF5441X cannot receive CAN RTR messages
via mailboxes. However the mailbox mode is more performant. The commit

| 1c45f577 ("can: flexcan: add ethtool support to change rx-rtr setting during runtime")

added support to switch from FIFO to mailbox mode on these cores.

After testing the mailbox mode on the MCF5441X by Angelo Dureghello,
this patch marks it (without RTR capability) as supported. Further the
IP core overview table is updated, that RTR reception via mailboxes is
not supported.

Link: https://lore.kernel.org/all/20220121084425.3141218-1-mkl@pengutronix.deTested-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The MRAM of the tcan4x5x has a size of 2K and starts at 0x8000. There
are no further registers in the tcan4x5x making 0x87fc the biggest
addressable register.

This patch fixes the max register value of the regmap config from
0x8ffc to 0x87fc.

Fixes: 6e1caaf8 ("can: tcan4x5x: fix max register value")
Link: https://lore.kernel.org/all/20220119064011.2943292-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In order to optimize FIFO access, especially on m_can cores attached
to slow busses like SPI, in patch

| e3938177 ("can: m_can: Disable IRQs on FIFO bus errors")

bulk read/write support has been added to the m_can_fifo_{read,write}
functions.

That change leads to the tcan driver to call
regmap_bulk_{read,write}() with a length of 0 (for CAN frames with 0
data length). regmap treats this as an error:

| tcan4x5x spi1.0 tcan4x5x0: FIFO write returned -22

This patch fixes the problem by not calling the
cdev->ops->{read,write)_fifo() in case of a 0 length read/write.

Fixes: e3938177 ("can: m_can: Disable IRQs on FIFO bus errors")
Link: https://lore.kernel.org/all/20220114155751.2651888-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Cc: Matt Kline <matt@bitbashing.io>
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Reported-by: Michael Anochin <anochin@photo-meter.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This tcan4x5x only comes with 2K of MRAM, a RX FIFO with a dept of 32
doesn't fit into the MRAM. Use a depth of 16 instead.

Fixes: 4edd396a ("dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver")
Link: https://lore.kernel.org/all/20220119062951.2939851-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Brian Silverman's address at bluerivertech.com is not valid anymore,
use Brian's private email address instead.

Link: https://lore.kernel.org/all/20220110082359.2019735-1-mkl@pengutronix.de
Cc: Brian Silverman <bsilver16384@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The tx_coalesce and mii_irq are not used at all now, so remove them.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify code by using bitmap_weight() and bitmap_zero() instead of
hand-writing these functions.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When 'ping' changes to use PING socket instead of RAW socket by:

   # sysctl -w net.ipv4.ping_group_range="0 100"

the selftests 'router_broadcast.sh' will fail, as such command

  # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b

can't receive the response skb by the PING socket. It's caused by mismatch
of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket,
as dif is vrf-h1 if dif's master was set to vrf-h1.

This patch is to fix this regression by also checking the sk_bound_dev_if
against sdif so that the packets can stil be received even if the socket
is not bound to the vrf device but to the real iif.

Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We encountered a crash in smc_setsockopt() and it is caused by
accessing smc->clcsock after clcsock was released.

 BUG: kernel NULL pointer dereference, address: 0000000000000020
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E     5.16.0-rc4+ #53
 RIP: 0010:smc_setsockopt+0x59/0x280 [smc]
 Call Trace:
  <TASK>
  __sys_setsockopt+0xfc/0x190
  __x64_sys_setsockopt+0x20/0x30
  do_syscall_64+0x34/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f16ba83918e
  </TASK>

This patch tries to fix it by holding clcsock_release_lock and
checking whether clcsock has already been released before access.

In case that a crash of the same reason happens in smc_getsockopt()
or smc_switch_to_fallback(), this patch also checkes smc->clcsock
in them too. And the caller of smc_switch_to_fallback() will identify
whether fallback succeeds according to the return value.

Fixes: fd57770d ("net/smc: wait for pending work before clcsock release_sock")
Link: https://lore.kernel.org/lkml/5dd7ffd1-28e2-24cc-9442-1defec27375e@linux.ibm.com/T/Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With previous bug fix, ->wait_capability flag is no longer needed and can
be removed.

Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>