- 16 Jul, 2016 34 commits
-
-
Archit Taneja authored
Introduce new compatible strings for the top level MDSS wrapper device, and the MDP5 device. Previously, the "qcom,mdp5" and "qcom,mdss_mdp" compatible strings were used to match the top level platform_device (which was also tied to the top level drm_device struct). Now, these strings are used to match the MDP5 platform device. Use "qcom,mdss" as the compatible string for top level MDSS device. This is now used to match the top level platform_device (which is tied to the drm_device struct). Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
The driver currently identifies the GPU components it needs by parsing a phandle list from the 'gpus' DT property. This isn't the right binding to go with. So, for now, just search all device nodes and find the gpu node we need by parsing a list of compatible strings. Once we know how to link the kms and gpu drivers, we'll drop this method and use the correct binding. Signed-off-by:
-
Archit Taneja authored
For MDP5 based platforms, the master device isn't the MDP5 platform device, but the top level MDSS device, which is a parent to MDP5 and interface (DSI, HDMI, eDP etc) devices. In order to add components on MDP5 platforms, we first need to populate the MDSS children, locate the MDP5 child, and then parse its ports to get the display interfaces. Signed-off-by:
-
Archit Taneja authored
The kms driver currently identifies all the mdss components it needs by parsing a phandle list from the 'connectors' DT property. Instead of this, describe a list of ports that the MDP hardware provides to the external world. These ports are linked to external encoder interfaces such as DSI, HDMI. These are also the subcomponent devices that we need add. This description of ports complies with the generic graph bindings. The LVDS port is a special case since it is a part of MDP4 itself, and its output connects directly to the LVDS panel. In this case, we don't try to add it as a component. Signed-off-by:
-
Archit Taneja authored
Simplifies some of the code that we'll add later. Signed-off-by:
-
Archit Taneja authored
Since runtime PM isn't implemented yet, we need to call mdp5_enable/disable in a few more places. These would later be replaced by runtime PM get/put calls. Signed-off-by:
-
Archit Taneja authored
With the new device hierarchy for MDP5, we need to enable runtime PM for both the toplevel MDSS device and the MDP5 device itself. Enable runtime PM for the new devices. Since MDP4 and MDP5 now have different places where runtime PM is enabled, remove the previous pm_runtime_enable/disable calls, and squash them in the respective kms drivers. The new device hierarchy (as expressed in the DT bindings) has the GDSC tied only to the MDSS wrapper device. This GDSC needs to be enabled for accessing any register in the MDSS sub-blocks. Once every driver is runtime adapted, the GDSC will be enabled when any sub-block device calls runtime_get because of the parent-child relationship with MDSS. Until then, we call pm_runtime_get_sync() once for the MDSS device to ensure the GDSC is never disabled. This will be removed once all the drivers are runtime PM adapted. The error handling paths become a bit tricky when we call these runtime PM funcs. There doesn't seem to be any helper that checks if runtime PM is enabled already. Add bool variables in mdp4_kms/mdp5_kms structs to check if the driver had managed to call pm_runtime_enable before bailing out. Signed-off-by:
-
Archit Taneja authored
The MDP5 sub-block register offsets are relative to the top level MDSS register address. Now that we have the start of MDP5 register address space, provide the offsets relative to that. This involves subtracting the offsets with 0x1000 or 0x100 depending on the MDP5 version. Signed-off-by:
-
Archit Taneja authored
Since MDSS registers were stuffed within the the MDP5 register space, we had an __offset_MDP() macro to identify the offset between the start of MDSS and MDP5 address spaces. This offset macro expected a MDP index argument, which didn't make much sense since we don't have multiple MDPs. The offset is no longer needed now that we have devices for the 2 different register address spaces. Also, remove the "REG_MDP5_MDP_" prefix to "REG_MDP5_". Update the generated headers in mdp5.xml.h We generally update headers as a separate patch, but we need to do these together to prevent breaking build. Signed-off-by:
-
Archit Taneja authored
With the new kms_init/destroy funcs in place for MDP5, we can get rid of the old kms funcs. Some members of the mdp5_kms struct also become redundant, so we remove those too. Signed-off-by:
-
Archit Taneja authored
Call msm_mdss_init in msm_drv to set up top level registers/irq line. Start using the new kms_init2/destroy2 funcs to inititalize MDP5 KMS. With the MDSS interrupt and irqdomain set up, the old MDP5 irq code can be dropped. The mdp5_hw_init kms func now uses the platform device tied to MDP5 instead of the one tied to the drm_device/MDSS. Signed-off-by:
-
Archit Taneja authored
With MDP5 as a new device, we need to do less for MDP when initializing modeset after all the components are bound. Create mdp5_kms_init2/destroy2 funcs that inits modeset. These will eventually replace the older kms_init/destroy funcs. In the new kms_init2, the platform_device used is the one corresponding to the new MDP5 platform_device. The new change here is that the irq is now retrieved using irq_of_parse_and_map(), since MDP5 is a child interrupt of the MDSS interrupt controller. Signed-off-by:
-
Archit Taneja authored
In order to have a tree-like device hierarchy between MDSS and its sub-blocks (MDP5, DSI, HDMI, eDP etc), we need to create a separate device/driver for MDP5. Currently, MDP5 and MDSS are squashed together are are tied to the top level platform_device, which is also the one used to create drm_device. The mdp5_kms_init code is split into two parts. The part where device resources are allocated are associated with the MDP5 driver's probe, the rest is executed later when we initialize modeset. With this change, unlike MDP4, the MDP5 platform_device isn't tied to the top level drm_device anymore. The top level drm_device is now associated with a platform device that corresponds to MDSS wrapper hardware. Create mdp5_init/destroy funcs that will be used by the MDP5 driver probe/remove. Use the HW_VERSION register in the MDP5 register address space. Both the MDSS and MDP VERSION registers give out identical version info. The older mdp5_kms_init code is left as is for now, this would be removed later when we have all the pieces to support the new device hierarchy. Signed-off-by:
-
Archit Taneja authored
SoCs that contain MDP5 have a top level wrapper called MDSS that manages clocks, power and irq for the sub-blocks within it. Currently, the MDSS portions are stuffed into the MDP5 driver. This makes it hard to represent the DT bindings in the correct way. We create a top level MDSS helper that handles these parts. This is essentially moving out some of the mdp5_kms irq code and MDSS register space and keeping it as a separate entity. We haven't given any clocks to the top level MDSS yet, but a AHB clock would be added in the future to access registers. One thing to note is that the resources allocated by this helper are tied to the top level platform_device (the one that allocates the drm_device struct too). This device would be the parent to MDSS sub-blocks like MDP5, DSI, eDP etc. Signed-off-by:
-
Archit Taneja authored
The driver gets the irq number using platform_get_irq on the main kms platform device. This works fine since both MDP4 and MDP5 currently have a flat device hierarchy. The platform device tied with the drm_device points to the MDP DT node in both cases. This won't work when MDP5 supports a tree-like hierarchy. In this case, the platform device tied to the top level drm_device is the MDSS DT node, and the irq we need for KMS is the one generated by MDP5, not MDSS. Get the irq number from the MDP4/5 kms driver itself. Each driver can later provide the irq number based on what device hierarchy it uses. While we're at it, call drm_irq_install only when we have a valid KMS driver. Signed-off-by:
-
Archit Taneja authored
These aren't used. Probably left overs when driver was refactored to support both MDP4 and MDP5. Signed-off-by:
-
Archit Taneja authored
This isn't needed as we only support OF. Signed-off-by:
-
Archit Taneja authored
Some cleanups: - Use simpler names for DT nodes in the example - Use references instead of dumping Document links everywhere Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Archit Taneja authored
The PLL in the DSI PHY block generates 2 clock outputs (Byte and Pixel clocks) that are fed into the Multimedia Clock Controller (MMCC). The MMCC uses these as source clocks for some of its RCGs to generate clocks that finally feed to the DSI host controller. Use the assigned clocks DT bindings to set up the MMCC RCGs that feed to the DSI host. Use the DSI PHY provided clocks to set up the parents of these assigned clocks. Acked-by:
-
Archit Taneja authored
The DSI node now has two ports that describe the connection between the MDP interface output and the DSI input, and the connection between the DSI output and the connected panel/bridge. Update the properties and the example. Also, use generic PHY bindings instead of the custom one. Acked-by:
-
Archit Taneja authored
The "qcom,data-lane-map" binding mentioned in the document is changed to the more generic "data-lanes" property specified in: Documentation/devicetree/bindings/media/video-interfaces.txt The previous binding expressed physical to logical data lane mappings, the standard "data-lanes" binding uses logical to physical data lane mappings. Update the docs to reflect this change. The example had the property incorrectly named as "lanes", update this too. The MSM DSI DT bindings aren't used anywhere at the moment, so it's okay to update this property. Acked-by:
-
Archit Taneja authored
A more standard DT binding describing data lanes already exists here: Documentation/devicetree/bindings/media/video-interfaces.txt Use this binding instead of "qcom,data-lane-map". One difference in the standard binding w.r.t to the existing binding is that it provides a logical to physical mapping instead of the other way round. Tweak the code to translate the data the way we want it. The MSM DSI DT bindings aren't used anywhere at the moment, so it's okay to update this property. Signed-off-by:
-
Archit Taneja authored
The DSI host links to the DSI PHY device using a custom binding. Switch to the generic PHY bindings. The DSI PHY driver itself doesn't use the common PHY framework for now. Signed-off-by:
-
Archit Taneja authored
The DSI interface is going to have two ports defined in its device node. The first port is always going to be the link between the MDP output and the input to DSI, the second port is going to be the link between the DSI output and the connected panel/bridge: ----- ----- ------- | MDP | ------> | DSI | ------> | Panel | ----- ----- ------- (Port 0) (Port 1) Until now, there was only one Port representing the output. Update the DSI host driver such that it parses Port #1 for a connected device. Signed-off-by: -
Archit Taneja authored
Address some issues wiht clock related bindings. It's okay to change these since these bindings aren't used in any dtsi files until now. MDP5: - Don't ask for source clock MDP4: - Give a better name for MDP_TV_CLK - Remove TV_SRC - Add MDP_AXI_CLK Acked-by:
-
Archit Taneja authored
Fix some issues with MDP4 clocks: - mdp4_dtv_encoder tries to get "src_clk", which is a RCG(TV_SRC) in MSM8960 and APQ8064. This isn't something the driver should access or configure. Instead of this, configure the "mdp_clk" (MDP_TV_CLK), a branch clock in MMCC that has the TV_SRC as its parent. Setting rate/enabling the "mdp_clk" will eventually configure "src_clk", which is what we want. - Rename "mdp_clk" to "tv_clk" because that's slightly less confusing. - Rename "mdp_axi_clk" to "bus_clk" because that's what we do elsewhere too. Signed-off-by:
-
Archit Taneja authored
The driver expects DT to provide the parent to MDP core clock. The only operation done to the parent clock is to set a rate. This can be achieved by setting the rate on the core clock itsef. Don't try to get the parent clock anymore. Signed-off-by:
-
Archit Taneja authored
The msm_iommu_map/unmap funcs have debug prints to show the list of VA:PA mappings. Use the correct variable to print the VAs. Signed-off-by:
-
Archit Taneja authored
The u32 type used to pass the physical addresses to iommu_map can't accommodate 64 bit addresses. Move to dma_addr_t to ensure wrong addresses aren't provided to the IOMMU driver. Signed-off-by:
-
https://github.com/anholt/linuxDave Airlie authored
This pull request brings in vc4 shader validation for branching, allowing GLSL shaders with non-unrolled loops. * tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux: drm/vc4: Fix a "the the" typo in a comment. drm/vc4: Fix definition of QPU_R_MS_REV_FLAGS drm/vc4: Add a getparam to signal support for branches. drm/vc4: Add support for branching in shader validation. drm/vc4: Add a bitmap of branch targets during shader validation. drm/vc4: Move validation's current/max ip into the validation struct. drm/vc4: Add a getparam ioctl for getting the V3D identity regs.
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v4.8-rc1 This set of changes contains a few cleanups for existing panels as well as improved handling of certain backlights. In addition there's support for a few new simple panels. * tag 'drm/panel/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Add support for Starry KR122EA0SRA panel dt-bindings: Add Starry KR122EA0SRA panel binding dt-bindings: Add vendor prefix for Starry dt-bindings: display: Add Sharp LQ101K1LY04 panel binding drm/panel: simple: Add support for Sharp LQ101K1LY04 drm/panel: simple: Add support for LG LP079QX1-SP0V panel dt-bindings: Add support for LG LP079QX1-SP0V panel drm/panel: simple: Add support for Sharp LQ123P1JX31 panel dt-bindings: Add Sharp LQ123P1JX31 panel binding drm/panel: simple: Add support for Samsung LSN122DL01-C01 panel dt-bindings: Add Samsung LSN122DL01-C01 panel binding drm/panel: simple: Add support for LG LP097QX1-SPA1 panel dt-bindings: Add LG LP097QX1-SPA1 panel binding drm/panel: simple: Update backlight state property drm/panel: simple: Remove gratuitous blank line drm/panel: simple: Fix a couple of physical sizes
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.8-rc1 This set of changes contains a bunch of cleanups to the host1x driver as well as the addition of a pin controller for DPAUX, which is required by boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C mode (for HDMI and DDC). Included is also a bit of rework of the SOR driver in preparation to add DisplayPort support as well as some refactoring and cleanup. Finally, all output drivers are converted to runtime PM, which greatly simplifies the handling of clocks and resets. * tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits) drm/tegra: sor: Reject HDMI 2.0 modes drm/tegra: sor: Prepare for generic PM domain support drm/tegra: dsi: Prepare for generic PM domain support drm/tegra: sor: Make XBAR configurable per SoC drm/tegra: sor: Use sor1_src clock to set parent for HDMI dt-bindings: display: tegra: Add source clock for SOR drm/tegra: sor: Implement sor1_brick clock drm/tegra: sor: Implement runtime PM drm/tegra: hdmi: Implement runtime PM drm/tegra: dsi: Implement runtime PM drm/tegra: dc: Implement runtime PM drm/tegra: hdmi: Enable audio over HDMI drm/tegra: sor: Do not support deep color modes drm/tegra: sor: Extract tegra_sor_mode_set() drm/tegra: sor: Split out tegra_sor_apply_config() drm/tegra: sor: Rename tegra_sor_calc_config() drm/tegra: sor: Factor out tegra_sor_set_parent_clock() drm/tegra: dpaux: Add pinctrl support dt-bindings: Add bindings for Tegra DPAUX pinctrl driver drm/tegra: Prepare DPAUX for supporting generic PM domains ...
-
git://github.com/yakir-Yang/linuxDave Airlie authored
Please consider merging this tag, which contains the v4 misc fixes and add RK3399 eDP support patches[0] I sent on 2016-06-29, rebased onto v4.7-rc5. * 'upstream/analogix-dp-20160705' of git://github.com/yakir-Yang/linux: dt-bindings: analogix_dp: rockchip: correct the wrong compatible name drm/rockchip: analogix_dp: introduce the pclk for grf drm/bridge: analogix_dp: fix no drm hpd event when panel plug in drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode drm/rockchip: analogix_dp: correct the connector display color format and bpc drm/bridge: analogix_dp: passing the connector as an argument in .get_modes() drm/rockchip: analogix_dp: make panel detect to an optional action drm/rockchip: analogix_dp: add rk3399 eDP support drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1 drm/rockchip: analogix_dp: split the lcdc select setting into device data
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
imx-drm updates - atomic mode setting conversion - replace DMFC FIFO allocation mechanism with a fixed allocation that is good enough for all cases - support for external bridges connected to parallel-display - improved error handling in imx-ldb, imx-tve, and parallel-display - some code cleanup in imx-tve * tag 'imx-drm-next-2016-07-14' of git://git.pengutronix.de/git/pza/linux: drm/imx: parallel-display: add bridge support drm/imx: parallel-display: check return code from of_get_drm_display_mode() gpu: ipu-v3: ipu-dc: don't bug out on invalid bus_format drm/imx: imx-tve: fix the error message drm/imx: imx-tve: remove unneeded 'or' operation drm/imx: imx-tve: check the value returned by regulator_set_voltage() drm/imx: imx-ldb: check return code on panel attach drm/imx: turn remaining container_of macros into inline functions drm/imx: store internal bus configuration in crtc state drm/imx: remove empty mode_set encoder callbacks drm/imx: atomic phase 3 step 3: Advertise DRIVER_ATOMIC drm/imx: atomic phase 3 step 2: Legacy callback fixups drm/bridge: dw-hdmi: Remove the legacy drm_connector_funcs structure drm/imx: atomic phase 3 step 1: Use atomic configuration drm/imx: Remove encoders' ->prepare callbacks drm/imx: atomic phase 2 step 2: Track plane_state->fb correctly in ->page_flip drm/imx: atomic phase 2 step 1: Wire up state ->reset, ->duplicate and ->destroy drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers gpu: ipu-v3: ipu-dmfc: Use static DMFC FIFO allocation mechanism drm/imx: ipuv3 plane: Check different types of plane separately
-
- 15 Jul, 2016 6 commits
-
-
Eric Anholt authored
Signed-off-by:Eric Anholt <eric@anholt.net>
-
Eric Anholt authored
We don't use it in shader validation currently, so it had no effect, but best to fix it anyway in case we do some day. Signed-off-by: -
Eric Anholt authored
Userspace needs to know if it can create shaders that do branching. Otherwise, for backwards compatibility with old kernels it needs to lower if statements to conditional assignments. Signed-off-by: -
Eric Anholt authored
We're already checking that branch instructions are between the start of the shader and the proper PROG_END sequence. The other thing we need to make branching safe is to verify that the shader doesn't read past the end of the uniforms stream. To do that, we require that at any basic block reading uniforms have the following instructions: load_imm temp, <next offset within uniform stream> add unif_addr, temp, unif The instructions are generated by userspace, and the kernel verifies that the load_imm is of the expected offset, and that the add adds it to a uniform. We track which uniform in the stream that is, and at draw call time fix up the uniform stream to have the address of the start of the shader's uniforms at that location. Signed-off-by: -
Eric Anholt authored
This isn't used yet, it's just a first step toward loop validation. During the main parsing of instructions, we need to know when we hit a new basic block so that we can reset validated state. v2: Fix a stray semicolon after an if block. (caught by kbuild test). Signed-off-by: -
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This pull request adds to the rework patch series for IOMMU integration to support ARM64bit architecture with DMA-IOMMU glue code. With this patch series, Exynos DRM works well on Exynos5433 SoC with IOMMU enabled. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: iommu: add support for ARM64 specific code for IOMMU glue drm/exynos: iommu: move ARM specific code to exynos_drm_iommu.h drm/exynos: iommu: remove unused entries from exynos_drm_private strcuture drm/exynos: iommu: add a check if all sub-devices have iommu controller drm/exynos: iommu: move dma_params configuration code to separate functions
-
