- 21 May, 2010 40 commits
-
-
Manuel Lauss authored
Add a sysdev for DBDMA PM. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1119/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
Use a sysdev to implement PM methods for the Au1000 interrupt controllers. Signed-off-by:
-
Manuel Lauss authored
Clean out stray unused board_reset() calls in pb1x boards, the PB1000 is different from the rest and gets private methods. (Cleanup after 32fd6901) Signed-off-by:
-
Wu Zhangjin authored
Loongson doesn't support MIPSR2, therefore, MIPSR2 vectored interrupts (cpu_has_vint) and MIPSR2 external interrupt controller mode (cpu_has_veic) are 0. Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1112/Signed-off-by:
-
Julia Lawall authored
From: Julia Lawall <julia@diku.dk> Use set_cpus_allowed_ptr rather than set_cpus_allowed. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> To: peterz@infradead.org To: mingo@elte.hu To: tglx@linutronix.de To: oleg@redhat.com To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1087/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (59 commits) HID: fix up 'EMBEDDED' mess in Kconfig HID: roccat: cleanup preprocessor macros HID: roccat: refactor special event handling HID: roccat: fix special button support HID: roccat: Correctly mark init and exit functions HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available HID: hid-samsung: remove redundant key mappings HID: add omitted hid-zydacron.c file HID: hid-samsung: add support for Creative Desktop Wireless 6000 HID: picolcd: Eliminate use after free HID: Zydacron Remote Control driver HID: Use kmemdup HID: magicmouse: fix input registration HID: make Prodikeys driver standalone config option HID: Prodikeys PC-MIDI HID Driver HID: hidraw: fix indentation HID: ntrig: add filtering module parameters HID: ntrig: add sysfs access to filter parameters HID: ntrig: add sensitivity and responsiveness support HID: add multi-input quirk for eGalax Touchcontroller ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (31 commits) dquot: Detect partial write error to quota file in write_blk() and add printk_ratelimit for quota error messages ocfs2: Fix lock inversion in quotas during umount ocfs2: Use __dquot_transfer to avoid lock inversion ocfs2: Fix NULL pointer deref when writing local dquot ocfs2: Fix estimate of credits needed for quota allocation ocfs2: Fix quota locking ocfs2: Avoid unnecessary block mapping when refreshing quota info ocfs2: Do not map blocks from local quota file on each write quota: Refactor dquot_transfer code so that OCFS2 can pass in its references quota: unify quota init condition in setattr quota: remove sb_has_quota_active in get/set_info quota: unify ->set_dqblk quota: unify ->get_dqblk ext3: make barrier options consistent with ext4 quota: Make quota stat accounting lockless. suppress warning: "quotatypes" defined but not used ext3: Fix waiting on transaction during fsync jbd: Provide function to check whether transaction will issue data barrier ufs: add ufs speciffic ->setattr call BKL: Remove BKL from ext2 filesystem ...
-
Linus Torvalds authored
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits) omap4: Add support for i2c init omap: Fix i2c platform init code for omap4 OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y OMAP powerdomain, hwmod, omap_device: add some credits OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains OMAP: timers: Fix clock source names for OMAP4 OMAP4 clock: Support clk_set_parent OMAP4: PRCM: Add offset defines for all CM registers OMAP4: PRCM: Add offset defines for all PRM registers OMAP4: PRCM: Remove duplicate definition of base addresses OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention OMAP4: CM: Remove non-functional registers in ES1.0 OMAP: hwmod: Replace WARN by pr_warning for clockdomain check OMAP: hwmod: Rename hwmod name for the MPU OMAP: hwmod: Do not exit the iteration if one clock init failed OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value OMAP: hwmod: Fix wrong pointer iteration in oh->slaves ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-nforce2: Remove redundant error messages on ACPI conflict i2c: Use <linux/io.h> instead of <asm/io.h> i2c-algo-pca: Fix coding style issues i2c-dev: Fix all coding style issues i2c-core: Fix some coding style issues i2c-gpio: Move initialization code to subsys_initcall() i2c-parport: Make template structure const i2c-dev: Remove unnecessary casts at24: Fall back to byte or word reads if needed i2c-stub: Expose the default functionality flags i2c/scx200_acb: Make PCI device ids constant i2c-i801: Fix all checkpatch warnings i2c-i801: All newer devices have all the optional features i2c-i801: Let the user disable selected driver features
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (25 commits) serial: Tidy REMOTE_DEBUG serial: isicomm: handle running out of slots serial: bfin_sport_uart: Use resource size to fix off-by-one error tty: fix obsolete comment on tty_insert_flip_string_fixed_flag serial: Add driver for the Altera UART serial: Add driver for the Altera JTAG UART serial: timbuart: make sure last byte is sent when port is closed serial: two branches the same in timbuart_set_mctrl() serial: uartlite: move from byte accesses to word accesses tty: n_gsm: depends on NET tty: n_gsm line discipline serial: TTY: new ldiscs for staging serial: bfin_sport_uart: drop redundant cpu depends serial: bfin_sport_uart: drop the experimental markings serial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines serial: bfin_sport_uart: only enable SPORT TX if data is to be sent serial: bfin_sport_uart: drop useless status masks serial: bfin_sport_uart: zero sport_uart_port if allocated dynamically serial: bfin_sport_uart: protect changes to uart_port serial: bfin_sport_uart: add support for CTS/RTS via GPIOs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (38 commits) net: Expose all network devices in a namespaces in sysfs hotplug: netns aware uevent_helper kobj: Send hotplug events in the proper namespace. netlink: Implment netlink_broadcast_filtered net/sysfs: Fix the bitrot in network device kobject namespace support netns: Teach network device kobjects which namespace they are in. kobject: Send hotplug events in all network namespaces driver-core: fix Typo in drivers/base/core.c for CONFIG_MODULE pci: check caps from sysfs file open to read device dependent config space sysfs: add struct file* to bin_attr callbacks sysfs: Remove usage of S_BIAS to avoid merge conflict with the vfs tree sysfs: Don't use enums in inline function declaration. sysfs-namespaces: add a high-level Documentation file sysfs: Comment sysfs directory tagging logic driver core: Implement ns directory support for device classes. sysfs: Implement sysfs_delete_link sysfs: Add support for tagged directories with untagged members. sysfs: Implement sysfs tagged directory support. kobj: Add basic infrastructure for dealing with namespaces. sysfs: Remove double free sysfs_get_sb ...
-
Randy Dunlap authored
Fix kernel-doc fatal error: /** beginning a non-kernel-doc comment block: (That alone does not kill kernel-doc, but the 'enum' was totally confusing to it.) Error(/lnx/src/TMP/linux-2.6.34-git6//include/linux/interrupt.h:88): cannot understand prototype: 'enum ' make[2]: *** [Documentation/DocBook/genericirq.xml] Error 1 Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiaying Zhang authored
dquot: Detect partial write error to quota file in write_blk() and add printk_ratelimit for quota error messages This patch changes quota_tree.c:write_blk() to detect error caused by partial write to quota file and add a macro to limit control printed quota error messages so we won't fill up dmesg with a corrupted quota file. Signed-off-by:
Jiaying Zhang <jiayingz@google.com> Signed-off-by:
Jan Kara <jack@suse.cz>
-
Jan Kara authored
We cannot cancel delayed work from ocfs2_local_free_info because that is called with dqonoff_mutex held and the work it cancels requires dqonoff_mutex to finish. Cancel the work before acquiring dqonoff_mutex. Acked-by:
Joel Becker <Joel.Becker@oracle.com> Signed-off-by:
-
Jan Kara authored
dquot_transfer() acquires own references to dquots via dqget(). Thus it waits for dq_lock which creates a lock inversion because dq_lock ranks above transaction start but transaction is already started in ocfs2_setattr(). Fix the problem by passing own references directly to __dquot_transfer. Acked-by:
-
Jan Kara authored
commit_dqblk() can write quota info to global file. That is actually a bad thing to do because if we are just modifying local quota file, we are not prepared (do not hold proper locks, do not have transaction credits) to do a modification of the global quota file. So do not use commit_dqblk() and instead call our writing function directly. Acked-by:
-
Jan Kara authored
We were missing reservation of a journal credit for modification of quota file inode when creating new dquot structure in the global quota file. Acked-by:
-
Jan Kara authored
OCFS2 had three issues with quota locking: a) When reading dquot from global quota file, we started a transaction while holding dqio_mutex which is prone to deadlocks because other paths do it the other way around b) During ocfs2_sync_dquot we were not protected against concurrent writers on the same node. Because we first copy data to local buffer, a race could happen resulting in old data being written to global quota file and thus causing quota inconsistency after a crash. c) ip_alloc_sem of quota files was acquired while a transaction is started in ocfs2_quota_write which can deadlock because we first get ip_alloc_sem and then start a transaction when extending quota files. We fix the problem a) by pulling all necessary code to ocfs2_acquire_dquot and ocfs2_release_dquot. Thus we no longer depend on generic dquot_acquire to do the locking and can force proper lock ordering. Problems b) and c) are fixed by locking i_mutex and ip_alloc_sem of global quota file in ocfs2_lock_global_qf and removing ip_alloc_sem from ocfs2_quota_read and ocfs2_quota_write. Acked-by:
-
Jan Kara authored
The position of global quota file info does not change. So we do not have to do logical -> physical block translation every time we reread it from disk. Thus we can also avoid taking ip_alloc_sem. Acked-by:
-
Jan Kara authored
There is no need to map offset of local dquot structure to on disk block in each quota write. It is enough to map it just once and store the physical block number in quota structure in memory. Moreover this simplifies locking as we do not have to take ip_alloc_sem from quota write path. Acked-by:
-
Jan Kara authored
Currently, __dquot_transfer() acquires its own references of dquot structures that will be put into inode. But for OCFS2, this creates a lock inversion between dq_lock (waited on in dqget) and transaction start (started in ocfs2_setattr). Currently, deadlock is impossible because dq_lock is acquired only during dquot_acquire and dquot_release and we already hold a reference to dquot structures in ocfs2_setattr so neither of these functions can be called while we call dquot_transfer. But this is rather subtle and it is hard to teach lockdep about it. So provide __dquot_transfer function that can be passed dquot references directly. OCFS2 can then pass acquired dquot references directly to __dquot_transfer with proper locking. Signed-off-by: -
Dmitry Monakhov authored
Quota must being initialized if size or uid/git changes requested. But initialization performed in two different places: in case of i_size file system is responsible for dquot init , but in case of uid/gid init will be called internally in dquot_transfer(). This ambiguity makes code harder to understand. Let's move this logic to one common helper function. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Christoph Hellwig authored
The methods already do these checks, so remove them in the quotactl implementation to allow non-VFS quota implementations to also support these calls. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
Pass the larger struct fs_disk_quota to the ->set_dqblk operation so that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented with a single filesystem operation and we can retire the ->set_xquota operation. The additional information (RT-subvolume accounting and warn counts) are left zero for the VFS quota implementation. Add new fieldmask values for setting the numer of blocks and inodes values which is required for the VFS quota, but wasn't for XFS. Signed-off-by:
-
Christoph Hellwig authored
Pass the larger struct fs_disk_quota to the ->get_dqblk operation so that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented with a single filesystem operation and we can retire the ->get_xquota operation. The additional information (RT-subvolume accounting and warn counts) are left zero for the VFS quota implementation. Signed-off-by:
-
Eric Sandeen authored
ext4 was updated to accept barrier/nobarrier mount options in addition to the older barrier=0/1. The barrier story is complex enough, we should help people by making the options the same at least, even if the defaults are different. This patch allows the barrier/nobarrier mount options for ext3, while keeping nobarrier the default. It also unconditionally displays barrier status in show_options, and prints a message at mount time if barriers are not enabled, just as ext4 does. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Dmitry Monakhov authored
Quota stats is mostly writable data structure. Let's alloc percpu bucket for each value. NOTE: dqstats_read() function is racy against dqstats_{inc,dec} and may return inconsistent value. But this is ok since absolute accuracy is not required. Signed-off-by: -
Sergey Senozhatsky authored
Suppress compilation warning: "quotatypes" defined but not used. quotatypes is used only when CONFIG_QUOTA_DEBUG or CONFIG_PRINT_QUOTA_WARNING is/are defined. Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Jan Kara authored
log_start_commit() returns 1 only when it started a transaction commit. Thus in case transaction commit is already running, we fail to wait for the commit to finish. Fix the issue by always waiting for the commit regardless of the log_start_commit return value. Signed-off-by: -
Jan Kara authored
Provide a function which returns whether a transaction with given tid will send a barrier to the filesystem device. The function will be used by ext3 to detect whether fsync needs to send a separate barrier or not. Signed-off-by: -
Dmitry Monakhov authored
generic setattr not longer responsible for quota transfer. use ufs_setattr for all ufs's inodes. Signed-off-by:
-
Jan Blunck authored
The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs() ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(), ext2_fill_super() and ext2_remount() are protected against each other by the struct super_block s_umount rw semaphore. The call in ext2_write_inode() could only protect the modification of the ext2_sb_info through ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount(). ext2_fill_super() and ext2_put_super() can be left out because you need a valid filesystem reference in all three cases, which you do not have when you are one of these functions. If the BKL is only protecting the modification of the ext2_sb_info it can safely be removed since this is protected by the struct ext2_sb_info s_lock. Signed-off-by:
Jan Blunck <jblunck@suse.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Blunck authored
Add a spinlock that protects against concurrent modifications of s_mount_state, s_blocks_last, s_overhead_last and the content of the superblock's buffer pointed to by sbi->s_es. The spinlock is now used in ext2_xattr_update_super_block() which was setting the EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection before. Likewise the spinlock is used in ext2_show_options() to have a consistent view of the mount options. This is a preparation patch for removing the BKL from ext2 in the next patch. Signed-off-by:
-
Jan Blunck authored
Move ext2_write_super() out of ext2_setup_super() as a preparation for the next patch that adds a new lock for superblock fields. Signed-off-by:
-
Jan Blunck authored
Both function originally did similar things except that ext2_sync_super() is returning after the call to sync_dirty_buffer(sbh). Therefore this patch adds a wait flag to tell ext2_sync_super() if it has to call sync_dirty_buffer() to wait for in-progress I/O to finish. Signed-off-by:
-
Jan Blunck authored
Depending in the state (valid or unchecked) of the filesystem either ext2_sync_super() or ext2_commit_super() is called. If the filesystem is currently valid (it is checked), we first mark it unchecked and afterwards duplicate the work that ext2_sync_super() is doing later. Therefore this patch removes the duplicate code and calls ext2_sync_super() directly after marking the filesystem unchecked. Signed-off-by:
-
Jan Blunck authored
This is probably a typo since the write time should actually be updated by ext2_sync_fs() instead of the mount time. Signed-off-by:
-
Jan Blunck authored
ext2_sync_fs() used to duplicate the code from ext2_clear_super_error(). Signed-off-by:
-
Dmitry Monakhov authored
Currently block/inode/dir counters are initialized before journal was recovered. In fact after journal recovery this info will probably change which results in incorrect numbers returned from statfs(2). BUG:#15768 Signed-off-by:
-
Francis Moreau authored
This patch removes a useless call to brelse(bitmap_bh) since at that point bitmap_bh is NULL and slightly cleans up bitmap_bh handling. Signed-off-by:
Francis Moreau <francis.moro@gmail.com> Signed-off-by:
-
