- 08 Oct, 2018 12 commits
-
-
Raju Lakkaraju authored
Microsemi PHYs (VSC 8530/31/40/41) need to update the Energy Efficient Ethernet initialization sequence. In order to avoid certain link state errors that could result in link drops and packet loss, the physical coding sublayer (PCS) must be updated with settings related to EEE in order to improve performance. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
There are a few counters available in the PHY: receive errors, false carriers, link disconnects, media CRC errors and valids counters. So let's expose those in the PHY driver. Use the priv structure as the next PHY to be supported has a few additional counters. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by:
-
Quentin Schulz authored
The Microsemi PHYs have multiple banks of registers (called pages). Registers can only be accessed from one page, if we need a register from another page, we need to switch the page and the registers of all other pages are not accessible anymore. Basically, to read register 5 from page 0, 1, 2, etc., you do the same phy_read(phydev, 5); but you need to set the desired page beforehand. In order to guarantee that two concurrent functions do not change the page, we need to do some locking per page. This can be achieved with the use of phy_select_page and phy_restore_page functions but phy_write/read calls in-between those two functions shall be replaced by their lock-free alternative __phy_write/read. Let's migrate this driver to those functions. Suggested-by:
-
Yangbo Lu authored
This patch is to fix and improve dpaa2-ptp driver in some places. - Fixed the return for some functions. - Replaced kzalloc with devm_kzalloc. - Removed dev_set_drvdata(dev, NULL). - Made ptp_dpaa2_caps const. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Yangbo Lu authored
This patch is to removed unused code for dprtc. This code will be re-added along with more features of dpaa2-ptp added. Signed-off-by:
-
Yangbo Lu authored
In dpaa2-ptp driver, it's odd to use rtc in names of some functions and structures except these dprtc APIs. This patch is to use ptp instead of rtc in names. Signed-off-by:
-
Yangbo Lu authored
The NETDEVICES dependency and ETHERNET dependency hadn't been required since dpaa2-eth was moved out of staging. Also allowed COMPILE_TEST for dpaa2-eth. Signed-off-by:
-
Yangbo Lu authored
The files maintained under DPAA2 PTP/ETHERNET needs to be updated since dpaa2 ptp driver had been moved into drivers/net/ethernet/freescale/dpaa2/. Signed-off-by:
-
Yangbo Lu authored
This patch is to move DPAA2 PTP driver out of staging/ since the dpaa2-eth had been moved out. Signed-off-by:
-
Tonghao Zhang authored
Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Leslie Monis authored
Fix 5 warnings and 14 checks issued by checkpatch.pl: CHECK: Logical continuations should be on the previous line + if ((q->vars.qdelay < q->params.target / 2) + && (q->vars.prob < MAX_PROB / 5)) WARNING: line over 80 characters + q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE])); CHECK: Blank lines aren't necessary after an open brace '{' +{ + CHECK: braces {} should be used on all arms of this statement + if (qlen < QUEUE_THRESHOLD) [...] + else { [...] CHECK: Unbalanced braces around else statement + else { CHECK: No space is necessary after a cast + if (delta > (s32) (MAX_PROB / (100 / 2)) && CHECK: Unnecessary parentheses around 'qdelay == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'qdelay_old == 0' + if ((qdelay == 0) && (qdelay_old == 0) && update_prob) CHECK: Unnecessary parentheses around 'q->vars.prob == 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0' + if ((q->vars.qdelay < q->params.target / 2) && + (q->vars.qdelay_old < q->params.target / 2) && + (q->vars.prob == 0) && + (q->vars.avg_dq_rate > 0)) CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: Comparison to NULL could be written "!opts" + if (opts == NULL) CHECK: No space is necessary after a cast + ((u32) PSCHED_TICKS2NS(q->params.target)) / WARNING: line over 80 characters + nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) || CHECK: Blank lines aren't necessary before a close brace '}' + +} CHECK: No space is necessary after a cast + .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) / WARNING: Missing a blank line after declarations + struct sk_buff *skb; + skb = qdisc_dequeue_head(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + qdisc_reset_queue(sch); WARNING: Missing a blank line after declarations + struct pie_sched_data *q = qdisc_priv(sch); + q->params.tupdate = 0; Signed-off-by:Leslie Monis <lesliemonis@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
There is no need to compare *val.vu32* with < 0 because such variable is of type u32 (32 bits, unsigned), making it impossible to hold a negative value. Fix this by removing such comparison. Also, initialize variable *max_val* to -1, just in case it is not initialized to either BNXT_MSIX_VEC_MAX or BNXT_MSIX_VEC_MIN_MAX before using it in a comparison with val.vu32 at line 159: if (val.vu32 > max_val) Addresses-Coverity-ID: 1473915 ("Unsigned compared against 0") Addresses-Coverity-ID: 1473920 ("Uninitialized scalar variable") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 07 Oct, 2018 1 commit
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.20 Second set of patches for 4.20. Heavy refactoring on mt76 continues and the usual drivers in active development (iwlwifi, qtnfmac, ath10k) getting new features. And as always, fixes and cleanup all over. Major changes: mt76 * more major refactoring to make it easier add new hardware support * more work on mt76x0e support * support for getting firmware version via ethtool * add mt7650 PCI ID iwlwifi * HE radiotap cleanup and improvements * reorder channel optimization for scans * bump the FW API version qtnfmac * fixes for 'iw' output: rates for enabled SGI, 'dump station' * expose more scan features to host: scan flush and dwell time * inform cfg80211 when OBSS is not supported by firmware wlcore * add support for optional wakeirq ath10k * retrieve MAC address from system firmware if provided * support extended board data download for dual-band QCA9984 * extended per sta tx statistics support via debugfs * average ack rssi support for data frames * speed up QCA6174 and QCA9377 firmware download using diag Copy Engine * HTT High Latency mode support needed by SDIO and USB support * get STA power save state via debugfs ath9k * add reset functionality for airtime station debugfs file ==================== Signed-off-by:
-
- 06 Oct, 2018 27 commits
-
-
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 4.20 * unify code between mt76x0, mt76x2 * mt76x0 fixes * another fix for rx buffer allocation regression on usb * move mt76x2 source files to mt76x2 folder * more work on mt76x0e support
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2018-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Third set of iwlwifi patches for 4.20 * Fix for a race condition that caused the FW to crash; * HE radiotap cleanup and improvements; * Reorder channel optimization for scans; * Bumped the FW API version supported after the last API change for this release; * Debugging improvements; * A few bug fixes; * Some cleanups in preparation for a new implementation; * Other small improvements, cleanups and fixes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman authored
Dave writes: "Networking fixes: 1) Fix truncation of 32-bit right shift in bpf, from Jann Horn. 2) Fix memory leak in wireless wext compat, from Stefan Seyfried. 3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao. 4) Need to cancel pending work when unbinding in smsc75xx otherwise we oops, also from Yu Zhao. 5) Don't allow enslaving a team device to itself, from Ido Schimmel. 6) Fix backwards compat with older userspace for rtnetlink FDB dumps. From Mauricio Faria. 7) Add validation of tc policy netlink attributes, from David Ahern. 8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: mvpp2: Extract the correct ethtype from the skb for tx csum offload ipv6: take rcu lock in rawv6_send_hdrinc() net: sched: Add policy validation for tc attributes rtnetlink: fix rtnl_fdb_dump() for ndmsg header yam: fix a missing-check bug net: bpfilter: Fix type cast and pointer warnings net: cxgb3_main: fix a missing-check bug bpf: 32-bit RSH verification must truncate input before the ALU op net: phy: phylink: fix SFP interface autodetection be2net: don't flip hw_features when VXLANs are added/deleted net/packet: fix packet drop as of virtio gso net: dsa: b53: Keep CPU port as tagged in all VLANs openvswitch: load NAT helper bnxt_en: get the reduced max_irqs by the ones used by RDMA bnxt_en: free hwrm resources, if driver probe fails. bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request bnxt_en: Fix VNIC reservations on the PF. team: Forbid enslaving team device to itself net/usb: cancel pending work when unbinding smsc75xx mlxsw: spectrum: Delete RIF when VLAN device is removed ... -
Sara Sharon authored
As preparation for new trigger type, make iwl_fw_dbg_collect_desc agnostic to the trigger structure. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Sara Sharon authored
iwl_fw_dbg_collect can be called by any function that already has the error string ready. iwl_fw_dbg_collect_trig, on the other hand, does string formatting. The occurrences decrement is at iwl_fw_dbg_collect_trig, instead of iwl_fw_dbg_collect, which causes it to sometimes be skipped. Move it to the right location. Signed-off-by:
-
Yisheng Xie authored
match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by:
-
Sara Sharon authored
As preparation for new trigger format, make the function agnostic to the trigger fomat. Instead it gets the relevant parameters - id and delay. Signed-off-by:
-
Johannes Berg authored
For trigger-based PPDUs, most values aren't part of the HE-SIG-A because they're preconfigured by the trigger frame. However, we still have this information since we used the trigger frame to configure the hardware, so we can (and do) read it back out and can thus show it in radiotap. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
When the info type is MU, we still have the data from the TSF overload words, so should decode that. When it's MU_EXT_INFO we additionally have the SIG-B common 0/1/2 fields. Also document the validity depending on the info type and fix the name of the regular TB PPDU info type accordingly. Signed-off-by:
-
Shahar S Matityahu authored
Add debugfs to send host command in mvm and fmac op modes. Allows to send host command at runtime via send_hcmd debugfs file. The command is received as a string that represents hex values. The struct of the command is as follows: [cmd_id][flags][length][data] cmd_id and flags are 8 chars long each. length is 4 chars long. data is length * 2 chars long. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Add send host command op to firmware runtime op struct to allow sending host commands to the op mode from the fw runtime context. Signed-off-by:
-
Johannes Berg authored
Bump the firmware API version to 41. Signed-off-by:
-
Haim Dreyfuss authored
Change MCC update response API to be compatible with new FW API. While at it change v2 which is not in use anymore to v3 and cleanup mcc_update v1 command and response which is obsolete. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Johannes Berg authored
If we use the iwl_pcie_txq_build_tfd() return value for BIT(), we should validate that it's not going to be negative, so do the check and bail out if we hit an error. We shouldn't, as we check if it'll fit beforehand, but better be safe. Signed-off-by:
-
Johannes Berg authored
The fall-through to the MVM case is intended as we have to do *something* to continue, and can't easily clean up. So we'll just fail in mvm later, if this does happen. Signed-off-by:
-
Johannes Berg authored
If we use the iwl_pcie_gen2_set_tb() return value for BIT(), we should validate that it's not going to be negative, so do the check and bail out if we hit an error. We shouldn't, as we check if it'll fit beforehand, but better be safe. Fixes: ab6c6445 ("iwlwifi: pcie: copy TX functions to new transport") Signed-off-by:
-
Naftali Goldstein authored
With NICs that don't read the NVM directly and instead rely on getting the relevant data from the firmware, the number of reserved MAC addresses was not added to the API. This caused the driver to assume there is only one address which results in all interfaces getting the same address. Update the API to fix this. While at it, fix-up the comments with firmware api names to actually match what we have in the firmware. Fixes: e9e1ba3d ("iwlwifi: mvm: support getting nvm data from firmware") Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Trigger dump collection if the alive flow fails, regardless of the reason. Signed-off-by:
-
Shaul Triebitz authored
If all free RB queues are empty, the driver will never restock the free RB queue. That's because the restocking happens in the Rx flow, and if the free queue is empty there will be no Rx. Although there's a background worker (a.k.a. allocator) allocating memory for RBs so that the Rx handler can restock them, the worker may run only after the free queue has become empty (and then it is too late for restocking as explained above). There is a solution for that called 'emergency': If the number of used RB's reaches half the amount of all RB's, the Rx handler will not wait for the allocator but immediately allocate memory for the used RB's and restock the free queue. But, since the used RB's is per queue, it may happen that the used RB's are spread between the queues such that the emergency check will fail for each of the queues (and still run out of RBs, causing the above symptom). To fix it, move to emergency mode if the sum of *all* used RBs (for all Rx queues) reaches half the amount of all RB's Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Johannes Berg authored
In mac80211, the default remains for HT, so set the limit to HE for our driver. Signed-off-by:
-
Johannes Berg authored
For SU/SU-ER/MU PPDUs we have spatial reuse. For those where it's relevant we also know the pre-FEC padding factor, PE disambiguity bit, beam change bit and doppler bit. Signed-off-by:
-
Johannes Berg authored
Add information about the LDCP extra symbol segment to the HE data when applicable (not for trigger-based PPDUs). While at it, clean up the code for UL/DL a bit. Signed-off-by:
-
Johannes Berg authored
We have this data available, so add it. Signed-off-by:
-
Johannes Berg authored
This code gets shorter if it doesn't have to check all the conditions, so move it to an appropriate place that has all of them validated already. Signed-off-by:
-
Johannes Berg authored
Split the code out into a separate routine, and move that to be called inside the previously introduced iwl_mvm_decode_he_phy_data() function. Signed-off-by:
-
Johannes Berg authored
Pull some of the decoding of he_phy_data into a separate function so we don't need to check over and over again if it's valid. While at it, fix the UL/DL bit reporting to be for all but trigger- based frames. Signed-off-by:
-
