- 07 May, 2012 3 commits
-
-
Konrad Rzeszutek Wilk authored
They use the same set of arguments, so it is just the matter of using the proper hypercall. Acked-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
When the Xen hypervisor boots a PV kernel it hands it two pieces of information: nr_pages and a made up E820 entry. The nr_pages value defines the range from zero to nr_pages of PFNs which have a valid Machine Frame Number (MFN) underneath it. The E820 mirrors that (with the VGA hole): BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000000a0000 (usable) Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000080800000 (usable) The fun comes when a PV guest that is run with a machine E820 - that can either be the initial domain or a PCI PV guest, where the E820 looks like the normal thing: BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009e000 (usable) Xen: 000000000009ec00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000020000000 (usable) Xen: 0000000020000000 - 0000000020200000 (reserved) Xen: 0000000020200000 - 0000000040000000 (usable) Xen: 0000000040000000 - 0000000040200000 (reserved) Xen: 0000000040200000 - 00000000bad80000 (usable) Xen: 00000000bad80000 - 00000000badc9000 (ACPI NVS) .. With that overlaying the nr_pages directly on the E820 does not work as there are gaps and non-RAM regions that won't be used by the memory allocator. The 'xen_release_chunk' helps with that by punching holes in the P2M (PFN to MFN lookup tree) for those regions and tells us that: Freeing 20000-20200 pfn range: 512 pages freed Freeing 40000-40200 pfn range: 512 pages freed Freeing bad80-badf4 pfn range: 116 pages freed Freeing badf6-bae7f pfn range: 137 pages freed Freeing bb000-100000 pfn range: 282624 pages freed Released 283999 pages of unused memory Those 283999 pages are subtracted from the nr_pages and are returned to the hypervisor. The end result is that the initial domain boots with 1GB less memory as the nr_pages has been subtracted by the amount of pages residing within the PCI hole. It can balloon up to that if desired using 'xl mem-set 0 8092', but the balloon driver is not always compiled in for the initial domain. This patch, implements the populate hypercall (XENMEM_populate_physmap) which increases the the domain with the same amount of pages that were released. The other solution (that did not work) was to transplant the MFN in the P2M tree - the ones that were going to be freed were put in the E820_RAM regions past the nr_pages. But the modifications to the M2P array (the other side of creating PTEs) were not carried away. As the hypervisor is the only one capable of modifying that and the only two hypercalls that would do this are: the update_va_mapping (which won't work, as during initial bootup only PFNs up to nr_pages are mapped in the guest) or via the populate hypercall. The end result is that the kernel can now boot with the nr_pages without having to subtract the 283999 pages. On a 8GB machine, with various dom0_mem= parameters this is what we get: no dom0_mem -Memory: 6485264k/9435136k available (5817k kernel code, 1136060k absent, 1813812k reserved, 2899k data, 696k init) +Memory: 7619036k/9435136k available (5817k kernel code, 1136060k absent, 680040k reserved, 2899k data, 696k init) dom0_mem=3G -Memory: 2616536k/9435136k available (5817k kernel code, 1136060k absent, 5682540k reserved, 2899k data, 696k init) +Memory: 2703776k/9435136k available (5817k kernel code, 1136060k absent, 5595300k reserved, 2899k data, 696k init) dom0_mem=max:3G -Memory: 2696732k/4281724k available (5817k kernel code, 1136060k absent, 448932k reserved, 2899k data, 696k init) +Memory: 2702204k/4281724k available (5817k kernel code, 1136060k absent, 443460k reserved, 2899k data, 696k init) And the 'xm list' or 'xl list' now reflect what the dom0_mem= argument is. Acked-by:
-
Konrad Rzeszutek Wilk authored
Otherwise we can get these meaningless: Freeing bad80-badf4 pfn range: 0 pages freed We also can do this for the summary ones - no point of printing "Set 0 page(s) to 1-1 mapping" Acked-by:
-
- 06 Apr, 2012 9 commits
-
-
Konrad Rzeszutek Wilk authored
During early bootup we can't use alloc_page, so to allocate leaf pages in the P2M we need to use extend_brk. For that we are utilizing the early_alloc_p2m and early_alloc_p2m_middle functions to do the job for us. This function follows the same logic as set_phys_to_machine. Signed-off-by: -
Konrad Rzeszutek Wilk authored
At the start of the function we were checking for idx != 0 and bailing out. And later calling extend_brk if idx != 0. That is unnecessary so remove that checks. Signed-off-by: -
Konrad Rzeszutek Wilk authored
For identity cases we want to call reserve_brk only on the boundary conditions of the middle P2M (so P2M[x][y][0] = extend_brk). This is to work around identify regions (PCI spaces, gaps in E820) which are not aligned on 2MB regions. However for the case were we want to allocate P2M middle leafs at the early bootup stage, irregardless of this alignment check we need some means of doing that. For that we provide the new argument. Signed-off-by: -
Konrad Rzeszutek Wilk authored
We are going to be using the early_alloc_p2m (and early_alloc_p2m_middle) code in follow up patches which are not related to setting identity pages. Hence lets move the code out in its own function and rename them as appropiate. Signed-off-by: -
Jan Beulich authored
The original XenoLinux code has always had things this way, and for compatibility reasons (in particular with a subsequent pciback adjustment) upstream Linux should behave the same way (allowing for two distinct error indications to be returned by the backend). Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Jan Beulich authored
Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a positive value to indicate the number of vectors (less than the amount requested) that can be set up for a given device. Returning this as an operation value (secondary result) is fine, but (primary) operation results are expected to be negative (error) or zero (success) according to the protocol. With the frontend fixed to match the XenoLinux behavior, the backend can now validly return zero (success) here, passing the upper limit on the number of vectors in op->value. Signed-off-by:
-
Srivatsa S. Bhat authored
There is an extra and unnecessary call to smp_processor_id() in cpu_bringup(). Remove it. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
The above mentioned patch checks the IOAPIC and if it contains -1, then it unmaps said IOAPIC. But under Xen we get this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 PGD 0 Oops: 0002 [#1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron 1525 /0U990C RIP: e030:[<ffffffff8134e51f>] [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 RSP: e02b: ffff8800d42cbb70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001 RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001 RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0:000000008005003b CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000) Stack: 00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157 ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384 0000000000000002 0000000000000010 00000000ffffffff 0000000000000000 Call Trace: [<ffffffff8134f157>] xen_bind_pirq_gsi_to_irq+0x87/0x230 [<ffffffff8100a9b2>] ? check_events+0x12+0x20 [<ffffffff814bab42>] xen_register_pirq+0x82/0xe0 [<ffffffff814bac1a>] xen_register_gsi.part.2+0x4a/0xd0 [<ffffffff814bacc0>] acpi_register_gsi_xen+0x20/0x30 [<ffffffff8103036f>] acpi_register_gsi+0xf/0x20 [<ffffffff8131abdb>] acpi_pci_irq_enable+0x12e/0x202 [<ffffffff814bc849>] pcibios_enable_device+0x39/0x40 [<ffffffff812dc7ab>] do_pci_enable_device+0x4b/0x70 [<ffffffff812dc878>] __pci_enable_device_flags+0xa8/0xf0 [<ffffffff812dc8d3>] pci_enable_device+0x13/0x20 The reason we are dying is b/c the call acpi_get_override_irq() is used, which returns the polarity and trigger for the IRQs. That function calls mp_find_ioapics to get the 'struct ioapic' structure - which along with the mp_irq[x] is used to figure out the default values and the polarity/trigger overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt. The proper fix for this is going in v3.5 and adds an x86_io_apic_ops struct so that platforms can override it. But for v3.4 lets carry this work-around. This patch does that by providing a slightly different variant of the fake IOAPIC entries. Signed-off-by: -
Igor Mammedov authored
commit b9136d207f08 xen: initialize platform-pci even if xen_emul_unplug=never breaks blkfront/netfront by not loading them because of xen_platform_pci_unplug=0 and it is never set for PV guest. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Igor Mammedov <imammedo@redhat.com> Signed-off-by:
-
- 24 Mar, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
The functions: "acpi_processor_*" sound like they depend on CONFIG_ACPI_PROCESSOR but in reality they are exposed when CONFIG_CPU_FREQ=[y|m]. As such update the Kconfig to have this dependency and fix compile issues: ERROR: "acpi_processor_unregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined! ERROR: "acpi_processor_notify_smm" [drivers/xen/xen-acpi-processor.ko] undefined! ERROR: "acpi_processor_register_performance" [drivers/xen/xen-acpi-processor.ko] undefined! ERROR: "acpi_processor_preregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined! Note: We still need the CONFIG_ACPI Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
- 22 Mar, 2012 2 commits
-
-
Igor Mammedov authored
When xen_emul_unplug=never is specified on kernel command line reading files from /sys/hypervisor is broken (returns -EBUSY). It is caused by xen_bus dependency on platform-pci and platform-pci isn't initialized when xen_emul_unplug=never is specified. Fix it by allowing platform-pci to ignore xen_emul_unplug=never, and do not intialize xen_[blk|net]front instead. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
The CPU hotplug code has now a callback to help bring up the CPU. Without the call we end up getting: BUG: soft lockup - CPU#0 stuck for 29s! [migration/0:6] Modules linked in: CPU ] Pid: 6, comm: migration/0 Not tainted 3.3.0upstream-01180-ged378a52 #1 Dell Inc. PowerEdge T105 /0RR825 RIP: e030:[<ffffffff810d3b8b>] [<ffffffff810d3b8b>] stop_machine_cpu_stop+0x7b/0xf0 RSP: e02b:ffff8800ceaabdb0 EFLAGS: 00000293 .. snip.. Call Trace: [<ffffffff810d3b10>] ? stop_one_cpu_nowait+0x50/0x50 [<ffffffff810d3841>] cpu_stopper_thread+0xf1/0x1c0 [<ffffffff815a9776>] ? __schedule+0x3c6/0x760 [<ffffffff815aa749>] ? _raw_spin_unlock_irqrestore+0x19/0x30 [<ffffffff810d3750>] ? res_counter_charge+0x150/0x150 [<ffffffff8108dc76>] kthread+0x96/0xa0 [<ffffffff815b27e4>] kernel_thread_helper+0x4/0x10 [<ffffffff815aacbc>] ? retint_restore_ar Thix fixes it. Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
- 21 Mar, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
When booting the kernel under machines that do not have P-states we would end up with: ------------[ cut here ]------------ WARNING: at drivers/xen/xen-acpi-processor.c:504 xen_acpi_processor_init+0x286/0 x2e0() Hardware name: ProLiant BL460c G6 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.39-200.0.3.el5uek #1 Call Trace: [<ffffffff8191d056>] ? xen_acpi_processor_init+0x286/0x2e0 [<ffffffff81068300>] warn_slowpath_common+0x90/0xc0 [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0 [<ffffffff8106834a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8191d056>] xen_acpi_processor_init+0x286/0x2e0 [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0 [<ffffffff81002168>] do_one_initcall+0xe8/0x130 .. snip.. Which is OK - the machines do not have P-states, so we fail to register to process the _PXX states. But there is no need to WARN the user of it. Oracle BZ# 13871288 Signed-off-by:
-
- 20 Mar, 2012 5 commits
-
-
Jan Beulich authored
Use 'bool' for boolean variables. Do proper section placement. Eliminate an unnecessary export. Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
-
Stefano Stabellini authored
The pirq_eoi_map is a bitmap offered by Xen to check which pirqs need to be EOI'd without having to issue an hypercall every time. We use PHYSDEVOP_pirq_eoi_gmfn_v2 to map the bitmap, then if we succeed we use pirq_eoi_map to check whether pirqs need eoi. Changes in v3: - explicitly use PHYSDEVOP_pirq_eoi_gmfn_v2 rather than PHYSDEVOP_pirq_eoi_gmfn; - introduce pirq_check_eoi_map, a function to check if a pirq needs an eoi using the map; -rename pirq_needs_eoi into pirq_needs_eoi_flag; - introduce a function pointer called pirq_needs_eoi that is going to be set to the right implementation depending on the availability of PHYSDEVOP_pirq_eoi_gmfn_v2. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
With patch "xen/cpufreq: Disable the cpu frequency scaling drivers from loading." we do not have to worry about said drivers loading themselves before the xen-acpi-processor driver. Hence we can remove the default selection (=y if CPU frequency drivers were built-in, or =m if CPU frequency drivers were built as modules), and just select =m for the default case. Signed-off-by: -
Konrad Rzeszutek Wilk authored
By using the functionality provided by "[CPUFREQ]: provide disable_cpuidle() function to disable the API." Under the Xen hypervisor we do not want the initial domain to exercise the cpufreq scaling drivers. This is b/c the Xen hypervisor is in charge of doing this as well and we can end up with both the Linux kernel and the hypervisor trying to change the P-states leading to weird performance issues. Acked-by:
-
Konrad Rzeszutek Wilk authored
useful for disabling cpufreq altogether. The cpu frequency scaling drivers and cpu frequency governors will fail to register. Signed-off-by:
Dave Jones <davej@redhat.com>
-
- 16 Mar, 2012 1 commit
-
-
Andrew Jones authored
PV-on-HVM guests may want to use the xen keyboard/mouse frontend, but they don't use the xen frame buffer frontend. For this case it doesn't make much sense for INPUT_XEN_KBDDEV_FRONTEND to depend on XEN_FBDEV_FRONTEND. The opposite direction always makes more sense, i.e. if you're using xenfb, then you'll want xenkbd. Switch the dependencies. Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
- 14 Mar, 2012 2 commits
-
-
Konrad Rzeszutek Wilk authored
This driver solves three problems: 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the hypervisor - aka P-states (cpufreq data). 2). Upload the the Cx state information (cpuidle data). 3). Inhibit CPU frequency scaling drivers from loading. The reason for wanting to solve 1) and 2) is such that the Xen hypervisor is the only one that knows the CPU usage of different guests and can make the proper decision of when to put CPUs and packages in proper states. Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it needs help from the initial domain to provide this information. The reason for 3) is that we do not want the initial domain to change P-states while the hypervisor is doing it as well - it causes rather some funny cases of P-states transitions. For this to work, the driver parses the Power Management data and uploads said information to the Xen hypervisor. It also calls acpi_processor_notify_smm() to inhibit the other CPU frequency scaling drivers from being loaded. Everything revolves around the 'struct acpi_processor' structure which gets updated during the bootup cycle in different stages. At the startup, when the ACPI parser starts, the C-state information is processed (processor_idle) and saved in said structure as 'power' element. Later on, the CPU frequency scaling driver (powernow-k8 or acpi_cpufreq), would call the the acpi_processor_* (processor_perflib functions) to parse P-states information and populate in the said structure the 'performance' element. Since we do not want the CPU frequency scaling drivers from loading we have to call the acpi_processor_* functions to parse the P-states and call "acpi_processor_notify_smm" to stop them from loading. There is also one oddity in this driver which is that under Xen, the physical online CPU count can be different from the virtual online CPU count. Meaning that the macros 'for_[online|possible]_cpu' would process only up to virtual online CPU count. We on the other hand want to process the full amount of physical CPUs. For that, the driver checks if the ACPI IDs count is different from the APIC ID count - which can happen if the user choose to use dom0_max_vcpu argument. In such a case a backup of the PM structure is used and uploaded to the hypervisor. [v1-v2: Initial RFC implementations that were posted] [v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>] [v4: Added vCPU != pCPU support - aka dom0_max_vcpus support] [v5: Cleaned up the driver, fix bug under Athlon XP] [v6: Changed the driver to a CPU frequency governor] [v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver made me rework it as driver that inhibits cpufreq scaling driver] [v8: Per Jan's review comments, fixed up the driver] [v9: Allow to continue even if acpi_processor_preregister_perf.. fails] Signed-off-by: -
Jan Beulich authored
The functions these get passed to have been taking pointers to const since at least 2.6.16. Signed-off-by:
-
- 13 Mar, 2012 5 commits
-
-
Stefano Stabellini authored
Unfortunately xend creates a bogus console/0 frotend/backend entry pair on xenstore that console backends cannot properly cope with. Any guest behavior that is not completely ignoring console/0 is going to either cause problems with xenconsoled or qemu. Returning 0 or -ENODEV from xencons_probe is not enough because it is going to cause the frontend state to become 4 or 6 respectively. The best possible thing we can do here is just ignore the entry from xenbus_probe_frontend. Signed-off-by:
-
Stefano Stabellini authored
Introduce a new config option HVC_XEN_FRONTEND to enable/disable the xenbus based pv console frontend. Signed-off-by:
-
Stefano Stabellini authored
This patch implements support for multiple consoles: consoles other than the first one are setup using the traditional xenbus and grant-table based mechanism. We use a list to keep track of the allocated consoles, we don't expect too many of them anyway. Changes in v3: - call hvc_remove before removing the console from xenconsoles; - do not lock xencons_lock twice in the destruction path; - use the DEFINE_XENBUS_DRIVER macro. Signed-off-by:
-
Stefano Stabellini authored
Signed-off-by:
-
Jan Beulich authored
The individual drivers' remove functions could legitimately attempt to access this information (for logging messages if nothing else). Note that I did not in fact observe a problem anywhere, but I came across this while looking into the reasons for what turned out to need the fix at https://lkml.org/lkml/2012/3/5/336 to vsprintf(). Signed-off-by:
-
- 10 Mar, 2012 2 commits
-
-
Konrad Rzeszutek Wilk authored
For the hypervisor to take advantage of the MWAIT support it needs to extract from the ACPI _CST the register address. But the hypervisor does not have the support to parse DSDT so it relies on the initial domain (dom0) to parse the ACPI Power Management information and push it up to the hypervisor. The pushing of the data is done by the processor_harveset_xen module which parses the information that the ACPI parser has graciously exposed in 'struct acpi_processor'. For the ACPI parser to also expose the Cx states for MWAIT, we need to expose the MWAIT capability (leaf 1). Furthermore we also need to expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly function. The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX operations, but it can't do it since it needs to be backwards compatible. Instead we choose to use the native CPUID to figure out if the MWAIT capability exists and use the XEN_SET_PDC query hypercall to figure out if the hypervisor wants us to expose the MWAIT_LEAF capability or not. Note: The XEN_SET_PDC query was implemented in c/s 23783: "ACPI: add _PDC input override mechanism". With this in place, instead of C3 ACPI IOPORT 415 we get now C3:ACPI FFH INTEL MWAIT 0x20 Note: The cpu_idle which would be calling the mwait variants for idling never gets set b/c we set the default pm_idle to be the hypercall variant. Acked-by:
-
Konrad Rzeszutek Wilk authored
We needed that call in the past to force the kernel to use default_idle (which called safe_halt, which called xen_safe_halt). But set_pm_idle_to_default() does now that, so there is no need to use this boot option operand. Signed-off-by:
-
- 26 Feb, 2012 1 commit
-
-
Jan Beulich authored
- casting pointers to integer types of different size is being warned on - an uninitialized variable warning occurred on certain gcc versions Signed-off-by:
-
- 24 Jan, 2012 1 commit
-
-
Alex Shi authored
percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them for further code clean up. I don't know much of xen code. But, since the code is in x86 architecture, the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the change is safe. Signed-off-by:
Alex Shi <alex.shi@intel.com> Acked-by:
Christoph Lameter <cl@gentwo.org> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 12 Jan, 2012 4 commits
-
-
Konrad Rzeszutek Wilk authored
We use the __pci_reset_function_locked to perform the action. Also on attaching ("bind") and detaching ("unbind") we save and restore the configuration states. When the device is disconnected from a guest we use the "pci_reset_function" to also reset the device before being passed to another guest. Signed-off-by: -
Konrad Rzeszutek Wilk authored
The use case of this is when a driver wants to call FLR when a device is attached to it using the SysFS "bind" or "unbind" functionality. The call chain when a user does "bind" looks as so: echo "0000:01.07.0" > /sys/bus/pci/drivers/XXXX/bind and ends up calling: driver_bind: device_lock(dev); <=== TAKES LOCK XXXX_probe: .. pci_enable_device() ...__pci_reset_function(), which calls pci_dev_reset(dev, 0): if (!0) { device_lock(dev) <==== DEADLOCK The __pci_reset_function_locked function allows the the drivers 'probe' function to call the "pci_reset_function" while still holding the driver mutex lock. Signed-off-by: -
Tang Liang authored
to make a hypercall to restore the vectors in the MSI/MSI-X configuration space. Signed-off-by:
Tang Liang <liang.tang@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pciLinus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
-
- 11 Jan, 2012 3 commits
-
-
Ben Hutchings authored
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently do not register a CPU device. Add the config option GENERIC_CPU_DEVICES which causes a generic CPU device to be registered for each present CPU, and make all these architectures select it. Richard Weinberger <richard@nod.at> covered UML and suggested using per_cpu. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Hutchings authored
cpu_dev_init() is only called from driver_init(), which does not check its return value. Therefore make cpu_dev_init() return void. We must register the CPU subsystem, so panic if this fails. If sched_create_sysfs_power_savings_entries() fails, the damage is contained, so ignore this (as before). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits) crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs crypto: serpent-sse2 - select LRW and XTS crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs crypto: twofish-x86_64-3way - select LRW and XTS crypto: xts - remove dependency on EXPERIMENTAL crypto: lrw - remove dependency on EXPERIMENTAL crypto: picoxcell - fix boolean and / or confusion crypto: caam - remove DECO access initialization code crypto: caam - fix polarity of "propagate error" logic crypto: caam - more desc.h cleanups crypto: caam - desc.h - convert spaces to tabs crypto: talitos - convert talitos_error to struct device crypto: talitos - remove NO_IRQ references crypto: talitos - fix bad kfree crypto: convert drivers/crypto/* to use module_platform_driver() char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver() crypto: serpent-sse2 - should select CRYPTO_CRYPTD crypto: serpent - rename serpent.c to serpent_generic.c crypto: serpent - cleanup checkpatch errors and warnings ...
-
