Alexey gave a AddressSanitizer[1] report that finally gave a good hint
at where was the origin of various problems already reported by Dormando
in the past [2]

Problem comes from the fact that UDP can have a lockless TX path, and
concurrent threads can manipulate sk_dst_cache, while another thread,
is holding socket lock and calls __sk_dst_set() in
ip4_datagram_release_cb() (this was added in linux-3.8)

It seems that all we need to do is to use sk_dst_check() and
sk_dst_set() so that all the writers hold same spinlock
(sk->sk_dst_lock) to prevent corruptions.

TCP stack do not need this protection, as all sk_dst_cache writers hold
the socket lock.

[1]
https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel

AddressSanitizer: heap-use-after-free in ipv4_dst_check
Read of size 2 by thread T15453:
 [<ffffffff817daa3a>] ipv4_dst_check+0x1a/0x90 ./net/ipv4/route.c:1116
 [<ffffffff8175b789>] __sk_dst_check+0x89/0xe0 ./net/core/sock.c:531
 [<ffffffff81830a36>] ip4_datagram_release_cb+0x46/0x390 ??:0
 [<ffffffff8175eaea>] release_sock+0x17a/0x230 ./net/core/sock.c:2413
 [<ffffffff81830882>] ip4_datagram_connect+0x462/0x5d0 ??:0
 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534
 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701
 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682
 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b
./arch/x86/kernel/entry_64.S:629

Freed by thread T15455:
 [<ffffffff8178d9b8>] dst_destroy+0xa8/0x160 ./net/core/dst.c:251
 [<ffffffff8178de25>] dst_release+0x45/0x80 ./net/core/dst.c:280
 [<ffffffff818304c1>] ip4_datagram_connect+0xa1/0x5d0 ??:0
 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534
 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701
 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682
 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b
./arch/x86/kernel/entry_64.S:629

Allocated by thread T15453:
 [<ffffffff8178d291>] dst_alloc+0x81/0x2b0 ./net/core/dst.c:171
 [<ffffffff817db3b7>] rt_dst_alloc+0x47/0x50 ./net/ipv4/route.c:1406
 [<     inlined    >] __ip_route_output_key+0x3e8/0xf70
__mkroute_output ./net/ipv4/route.c:1939
 [<ffffffff817dde08>] __ip_route_output_key+0x3e8/0xf70 ./net/ipv4/route.c:2161
 [<ffffffff817deb34>] ip_route_output_flow+0x14/0x30 ./net/ipv4/route.c:2249
 [<ffffffff81830737>] ip4_datagram_connect+0x317/0x5d0 ??:0
 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534
 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701
 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682
 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b
./arch/x86/kernel/entry_64.S:629

[2]
<4>[196727.311203] general protection fault: 0000 [#1] SMP
<4>[196727.311224] Modules linked in: xt_TEE xt_dscp xt_DSCP macvlan bridge coretemp crc32_pclmul ghash_clmulni_intel gpio_ich microcode ipmi_watchdog ipmi_devintf sb_edac edac_core lpc_ich mfd_core tpm_tis tpm tpm_bios ipmi_si ipmi_msghandler isci igb libsas i2c_algo_bit ixgbe ptp pps_core mdio
<4>[196727.311333] CPU: 17 PID: 0 Comm: swapper/17 Not tainted 3.10.26 #1
<4>[196727.311344] Hardware name: Supermicro X9DRi-LN4+/X9DR3-LN4+/X9DRi-LN4+/X9DR3-LN4+, BIOS 3.0 07/05/2013
<4>[196727.311364] task: ffff885e6f069700 ti: ffff885e6f072000 task.ti: ffff885e6f072000
<4>[196727.311377] RIP: 0010:[<ffffffff815f8c7f>]  [<ffffffff815f8c7f>] ipv4_dst_destroy+0x4f/0x80
<4>[196727.311399] RSP: 0018:ffff885effd23a70  EFLAGS: 00010282
<4>[196727.311409] RAX: dead000000200200 RBX: ffff8854c398ecc0 RCX: 0000000000000040
<4>[196727.311423] RDX: dead000000100100 RSI: dead000000100100 RDI: dead000000200200
<4>[196727.311437] RBP: ffff885effd23a80 R08: ffffffff815fd9e0 R09: ffff885d5a590800
<4>[196727.311451] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[196727.311464] R13: ffffffff81c8c280 R14: 0000000000000000 R15: ffff880e85ee16ce
<4>[196727.311510] FS:  0000000000000000(0000) GS:ffff885effd20000(0000) knlGS:0000000000000000
<4>[196727.311554] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[196727.311581] CR2: 00007a46751eb000 CR3: 0000005e65688000 CR4: 00000000000407e0
<4>[196727.311625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[196727.311669] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
<4>[196727.311713] Stack:
<4>[196727.311733]  ffff8854c398ecc0 ffff8854c398ecc0 ffff885effd23ab0 ffffffff815b7f42
<4>[196727.311784]  ffff88be6595bc00 ffff8854c398ecc0 0000000000000000 ffff8854c398ecc0
<4>[196727.311834]  ffff885effd23ad0 ffffffff815b86c6 ffff885d5a590800 ffff8816827821c0
<4>[196727.311885] Call Trace:
<4>[196727.311907]  <IRQ>
<4>[196727.311912]  [<ffffffff815b7f42>] dst_destroy+0x32/0xe0
<4>[196727.311959]  [<ffffffff815b86c6>] dst_release+0x56/0x80
<4>[196727.311986]  [<ffffffff81620bd5>] tcp_v4_do_rcv+0x2a5/0x4a0
<4>[196727.312013]  [<ffffffff81622b5a>] tcp_v4_rcv+0x7da/0x820
<4>[196727.312041]  [<ffffffff815fd9e0>] ? ip_rcv_finish+0x360/0x360
<4>[196727.312070]  [<ffffffff815de02d>] ? nf_hook_slow+0x7d/0x150
<4>[196727.312097]  [<ffffffff815fd9e0>] ? ip_rcv_finish+0x360/0x360
<4>[196727.312125]  [<ffffffff815fda92>] ip_local_deliver_finish+0xb2/0x230
<4>[196727.312154]  [<ffffffff815fdd9a>] ip_local_deliver+0x4a/0x90
<4>[196727.312183]  [<ffffffff815fd799>] ip_rcv_finish+0x119/0x360
<4>[196727.312212]  [<ffffffff815fe00b>] ip_rcv+0x22b/0x340
<4>[196727.312242]  [<ffffffffa0339680>] ? macvlan_broadcast+0x160/0x160 [macvlan]
<4>[196727.312275]  [<ffffffff815b0c62>] __netif_receive_skb_core+0x512/0x640
<4>[196727.312308]  [<ffffffff811427fb>] ? kmem_cache_alloc+0x13b/0x150
<4>[196727.312338]  [<ffffffff815b0db1>] __netif_receive_skb+0x21/0x70
<4>[196727.312368]  [<ffffffff815b0fa1>] netif_receive_skb+0x31/0xa0
<4>[196727.312397]  [<ffffffff815b1ae8>] napi_gro_receive+0xe8/0x140
<4>[196727.312433]  [<ffffffffa00274f1>] ixgbe_poll+0x551/0x11f0 [ixgbe]
<4>[196727.312463]  [<ffffffff815fe00b>] ? ip_rcv+0x22b/0x340
<4>[196727.312491]  [<ffffffff815b1691>] net_rx_action+0x111/0x210
<4>[196727.312521]  [<ffffffff815b0db1>] ? __netif_receive_skb+0x21/0x70
<4>[196727.312552]  [<ffffffff810519d0>] __do_softirq+0xd0/0x270
<4>[196727.312583]  [<ffffffff816cef3c>] call_softirq+0x1c/0x30
<4>[196727.312613]  [<ffffffff81004205>] do_softirq+0x55/0x90
<4>[196727.312640]  [<ffffffff81051c85>] irq_exit+0x55/0x60
<4>[196727.312668]  [<ffffffff816cf5c3>] do_IRQ+0x63/0xe0
<4>[196727.312696]  [<ffffffff816c5aaa>] common_interrupt+0x6a/0x6a
<4>[196727.312722]  <EOI>
<1>[196727.313071] RIP  [<ffffffff815f8c7f>] ipv4_dst_destroy+0x4f/0x80
<4>[196727.313100]  RSP <ffff885effd23a70>
<4>[196727.313377] ---[ end trace 64b3f14fae0f2e29 ]---
<0>[196727.380908] Kernel panic - not syncing: Fatal exception in interrupt
Reported-by: Alexey Preobrazhensky <preobr@google.com>
Reported-by: dormando <dormando@rydia.ne>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 8141ed9f ("ipv4: Add a socket release callback for datagram sockets")
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add lib/test_bpf.c entry to maintainers file under networking.
All changes were posted via netdev for review, so make sure
other people Cc it as well when they call get_maintainer.pl.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several instances where a pskb_copy or __pskb_copy is
immediately followed by an skb_clone.

Add a couple of new functions to allow the copy skb to be allocated
from the fclone cache and thus speed up subsequent skb_clone calls.

Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <antonio@meshcoding.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Arvid Brodin <arvid.brodin@alten.se>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Allan Stephens <allan.stephens@windriver.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Toshiaki Makita says:

====================
bridge: 802.1ad vlan protocol support

Currently bridge vlan filtering doesn't work fine with 802.1ad protocol.
Only if a bridge is configured without pvid, the bridge receives only
802.1ad tagged frames and no STP is used, it will work.
Otherwise:
- If pvid is configured, it can put only 802.1Q tags but cannot put 802.1ad
  tags.
- If 802.1Q and 802.1ad tagged frames arrive in mixture, it applies filtering
  regardless of their protocols.
- While an 802.1ad bridge should use another mac address for STP BPDU and
  should forward customer's BPDU frames, it can't.
Thus, we can't properly handle frames once 802.1ad is used.

Handling 802.1ad is useful if we want to allow stacked vlans to be used,
e.g., guest VMs wants to use vlan tags and the host also wants to segregate
guest's traffic from other guests' by vlan tags.

Here is the image describing how to configure a bridge to filter VMs traffic.

         +-------+p/u   +-----+  +---------+
 +----+  |       |------|vnet0|--|User A VM|
 |eth0|--|802.1ad|      +-----+  +---------+
 +----+  |bridge |p/u   +-----+  +---------+
         |       |------|vnet1|--|User B VM|
         +-------+      +-----+  +---------+
p/u: pvid/untagged

This patch set enables us to set vlan protocols per bridge.
This tries to implement a bridge like S-VLAN component in IEEE 802.1Q-2011
spec.

Note that there is another possible implementation that sets vlan protocols
per port. Some HW switches seem to take that approach.
However, I think per-bridge approach is better, because;
- I think the typical usage of an 802.1ad bridge is segregating 802.1Q tagged
  traffic (like what is described above), and this doesn't need the ability to
  be set protocols per port. Also, If a bridge has many ports and it supports
  per-port setting, we might have to make much more extra configurations to
  change protocols of all ports.

- I assume that the main perpose to set protocol per port is to assign S-VID
  according to C-VID, or to realize two logical bridges (one is an 802.1Q
  filtering bridge and the other is an 802.1ad filtering bridge) in one bridge.
  The former usually needs additional features such as vlan id mapping, and
  is likely to make bridge's code complicated. If a user wants, such enhanced
  features can be accomplished by a combination of multiple bridges, so it is
  not absolutely necessary to implement these features in a bridge itself.
  The latter is simply unnecessary because we can easily make two bridges of
  which one is an 802.1Q bridge and the other is an 802.1ad bridge.

Here is an example of the enhanced feature that we can realize by using
multiple bridges and veth interfaces. This way is documented in
IEEE 802.1Q-2011 clause 15.4 (C-tagged service interface).

 +----+  +-------+p/u         +------+  +----+  +--+
 |eth0|--|802.1ad|----veth----|802.1Q|--|vnet|--|VM|
 +----+  |bridge |----veth----|bridge|  +----+  +--+
         +-------+p/u         +------+
p/u: pvid/untagged

In this configuration, we can map C-VIDs to any S-VID.
For example;
 C-VID 10 and 20 to S-VID 100
 C-VID 30 to S-VID 110
This is achieved through the 802.1Q bridge that forwards C-tagged frames to
proper ports of the 802.1ad bridge.

Changes:
v1 -> v2:
- Make the way to forward bridge group addresses more generic by introducing
  new mask, group_fwd_mask_required.

RFC -> v1:
- Add S-TAG tx offload.
- Remove a fix around stacked vlan which has already been fixed.
- Take into account Bridge Group Addresses.
- Separate handling of protocol-mismatch from br_vlan_get_tag().
- Change the way to set vlan_proto from netlink to sysfs because no other
  existing configuration per bridge can be set by netlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This enables us to change the vlan protocol for vlan filtering.
We come to be able to filter frames on the basis of 802.1ad vlan tags
through a bridge.

This also changes br->group_addr if it has not been set by user.
This is needed for an 802.1ad bridge.
(See IEEE 802.1Q-2011 8.13.5.)

Furthermore, this sets br->group_fwd_mask_required so that an 802.1ad
bridge can forward the Nearest Customer Bridge group addresses except
for br->group_addr, which should be passed to higher layer.

To change the vlan protocol, write a protocol in sysfs:
# echo 0x88a8 > /sys/class/net/br0/bridge/vlan_protocol
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a bridge is an 802.1ad bridge, it must forward another bridge group
addresses (the Nearest Customer Bridge group addresses).
(For details, see IEEE 802.1Q-2011 8.6.3.)

As user might not want group_fwd_mask to be modified by enabling 802.1ad,
introduce a new mask, group_fwd_mask_required, which indicates addresses
the bridge wants to forward. This will be set by enabling 802.1ad.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

This enables a bridge to have vlan protocol informantion and allows vlan
tag manipulation (retrieve, insert and remove tags) according to the vlan
protocol.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bridge device doesn't need to embed S-tag into skb->data.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit e9ce7cb6 ("xen-netback: Factor queue-specific data into
queue struct") added a use of vzalloc/vfree to interface.c, but
removed the #include <linux/vmalloc.h> statement at the same time,
which causes this build error:

drivers/net/xen-netback/interface.c: In function 'xenvif_free':
drivers/net/xen-netback/interface.c:754:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
  vfree(vif->queues);
  ^
cc1: some warnings being treated as errors
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Andrew J. Bennieston <andrew.bennieston@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using phy_drivers_register/_unregister functions is proper way to
handle multiple PHY drivers registration. For Realtek PHY drivers
module, it fixes incomplete current error-handlings up and adds
missed unregistration for the RTL8201CP driver.
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes an issue that we cannot use nfs rootfs correctly
on r8a7790 when the command below runs on a host PC.

 $ sudo ping -f -l 8 $BOARD_IP_ADDR

Since the driver sets the RACT to 1 in the first while loop of
sh_eth_rx(), the controller accepts a next frame into the next RX
descriptor during the while loop. But, in the first while loop
doesn't allocate a next skb. So, this patch removes the RACT setting
in the first while loop of sh_eth_rx().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the packet "exceeded" condition in sh_eth_rx() when
RACT in an RX descriptor is not set and the "quota" is 0.
Otherwise, kernel panic happens because the "&n->poll_list" is deleted
twice in sh_eth_poll() which calls napi_complete() and net_rx_action().
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix compiler warning on 32-bit architectures:

net/core/filter.c: In function '__sk_run_filter':
net/core/filter.c:540:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
net/core/filter.c:550:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
net/core/filter.c:560:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 4f4482dc ("tipc: compensate
for double accounting in socket rcv buffer") we access 'truesize' of
a received buffer after it might have been released by the function
filter_rcv().

In this commit we correct this by reading the value of 'truesize' to
the stack before delivering the buffer to filter_rcv().
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SXGBE_CORE_L34_ADDCTL_REG define is cut and pasted twice so we can
delete the second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The QLC_83XX_GET_LSO_CAPABILITY define is cut and pasted twice so we can
delete the second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Amir Vadai says:

====================
cpumask,net: affinity hint helper function

This patchset will set affinity hint to influence IRQs to be allocated on the
same NUMA node as the one where the card resides. As discussed in
http://www.spinics.net/lists/netdev/msg271497.html

If number of IRQs allocated is greater than the number of local NUMA cores, all
local cores will be used first, and the rest of the IRQs will be on a remote
NUMA node.
If no NUMA support - IRQ's and cores will be mapped 1:1

Since the utility function to calculate the mapping could be useful in other mq
drivers in the kernel, it was added to cpumask.[ch]

This patchset was tested and applied on top of net-next since the first
consumer is a network device (mlx4_en).  Over commit fff1f59b "mac802154:
llsec: add forgotten list_del_rcu in key removal"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The “affinity hint” mechanism is used by the user space
daemon, irqbalancer, to indicate a preferred CPU mask for irqs.
Irqbalancer can use this hint to balance the irqs between the
cpus indicated by the mask.

We wish the HCA to preferentially map the IRQs it uses to numa cores
close to it.  To accomplish this, we use cpumask_set_cpu_local_first(), that
sets the affinity hint according the following policy:
First it maps IRQs to “close” numa cores.  If these are exhausted, the
remaining IRQs are mapped to “far” numa cores.
Signed-off-by: Yuval Atias <yuvala@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set

Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-06-11

This series contains updates to igb, i40e and i40evf.

Todd makes a change to igb to un-hide invariant returns by getting rid of
the E1000_SUCCESS define and converting those returns to return 0.

Jacob separates the hardware logic from the set function, so that we can
re-use it during a ptp_reset in igb.  This enables the reset to return
functionality to the last know timestamp mode, rather than resetting the
value.

Ashish implements context flags for headwb and headwb_addr so that we
do not have to keep them always enabled.

Shannon updates the admin queue API for the new firmware, which adds
set_pf_content, nvm_config_read/write, replaces set_phy_reset with
set_phy_debug and removes nvm_read/write_reg_se.  Cleans up the driver
to use the stored base_queue value since there is no need to read the
PCI register for the PF's base queue on every single transmit queue
enable and disable as we already have the value stored from reading
the capability features at startup.

Anjali changes the notion of source and destination for FD_SB in ethtool
to align i40e with other drivers.  Adds flow director statistics to
the PF stats.  Fixes a bug in ethtool for flow director drop packet
filter where the drop action comes down as a ring_cookie value, so allow
it as a special value that can be used to configure destination control.

Mitch fixes the i40evf to keep the driver from going down when it is
already in a down state.  This prevents a CPU soft lock in napi_disable().
Also change the i40evf to check the admin queue error bits since the
firmware can indicate any admin queue error states to the driver via
some bits in the length registers.

Neerav separates out the DCB capability and enabled flags because currently
if the firmware reports DCB capability the driver enables
I40E_FLAG_DCB_ENABLED flag.  When this flag is enabled the driver inserts
a tag when transmitting a packet from the port even if there are no DCB
traffic classes configured at the port.  So by adding the additional flag,
I40E_FLAG_DCB_CAPABLE, that will be set when the DCB capability is present
and the existing enabled flag will only be set if there are more than one
traffic classes configured at the port.

Greg fixes the i40e driver to not automatically accept tagged packets by
default so that the system must request a VLAN tag packet filter to get
packets with that tag.  Greg also converts i40e to use the in-kernel
ether_addr_copy() instead of mempcy().

Jesse removes the FTYPE field from the receive descriptor to match the
hardware implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
SCTP update

This set contains transport path selection improvements in
SCTP. Please see individual patches for details.
====================
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes the following sparse warning:

  net/sctp/associola.c:1556:29: warning: incorrect type in initializer (different base types)
  net/sctp/associola.c:1556:29:    expected bool [unsigned] [usertype] preload
  net/sctp/associola.c:1556:29:    got restricted gfp_t
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function sctp_select_active_and_retran_path(), we walk the
transport list in order to look for the two most recently used
ACTIVE transports (trans_pri, trans_sec). In case we didn't find
anything ACTIVE, we currently just camp on a possibly PF or
INACTIVE transport that is primary path; this behavior actually
dates back to linux-history tree of the very early days of
lksctp, and can yield a behavior that chooses suboptimal
transport paths.

Instead, be a bit more clever by reusing and extending the
recently introduced sctp_trans_elect_best() handler. In case
both transports are evaluated to have the same score resulting
from their states, break the tie by looking at: 1) transport
patch error count 2) last_time_heard value from each transport.

This is analogous to Nishida's Quick Failover draft [1],
section 5.1, 3:

  The sender SHOULD avoid data transmission to PF destinations.
  When all destinations are in either PF or Inactive state,
  the sender MAY either move the destination from PF to active
  state (and transmit data to the active destination) or the
  sender MAY transmit data to a PF destination. In the former
  scenario, (i) the sender MUST NOT notify the ULP about the
  state transition, and (ii) MUST NOT clear the destination's
  error counter. It is recommended that the sender picks the
  PF destination with least error count (fewest consecutive
  timeouts) for data transmission. In case of a tie (multiple PF
  destinations with same error count), the sender MAY choose the
  last active destination.

Thus for sctp_select_active_and_retran_path(), we keep track of
the best, if any, transport that is in PF state and in case no
ACTIVE transport has been found (hence trans_{pri,sec} is NULL),
we select the best out of the three: current primary_path and
retran_path as well as a possible PF transport.

The secondary may still camp on the original primary_path as
before. The change in sctp_trans_elect_best() with a more fine
grained tie selection also improves at the same time path selection
for sctp_assoc_update_retran_path() in case of non-ACTIVE states.

  [1] http://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Be more precise in transport path selection and use ktime
helpers instead of jiffies to compare and pick the better
primary and secondary recently used transports. This also
avoids any side-effects during a possible roll-over, and
could lead to better path decision-making.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch just refactors and moves the code for the active
path selection into its own helper function outside of
sctp_assoc_control_transport() which is already big enough.
No functional changes here.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add two minimal helper functions analogous to time_before() and
time_after() that will later on both be needed by SCTP code.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phoebe Buckheister says:

====================
Recent llsec code introduced a memory leak on decryption failures during rx.
This fixes said leak, and optimizes the receive loops for monitor and wpan
devices to only deliver skbs to devices that are actually up. Also changes a
dev_kfree_skb to kfree_skb when an invalid packet is dropped before being
pushed into the stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Only one WPAN devices can be active at any given time, so only deliver
packets to that one interface that is actually up. Multiple monitors may
be up at any given time, but we don't have to deliver to monitors that
are down either.
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac802154 RX did not free skbs on decryption failure, assuming that the
caller would when the local rx handler returned _DROP. This was false.
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bump versions.

Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

No need to read the PCI register for the PF's base queue on every single Tx
queue enable and disable as we already have the value stored from reading
the capability features at startup.

Change-ID: Ic02fb622757742f43cb8269369c3d972d4f66555
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

A drop action comes down as a ring_cookie value, so allow it as
a special value that can be used to configure destination control.

Also fix the output to filter read command accordingly.

Change-ID: I9956723cee42f3194885403317dd21ed4a151144
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add members to stat struct to keep track of Flow director ATR and
SideBand filter packet matches.

Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change drops the FTYPE field from the Rx descriptor, to
match the hardware implementation.

Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

FW can indicate any admin queue error states to the driver via some bits
in the length registers. Each time we process an admin queue message,
check these bits and log any errors we find. Since the VF really can't
do much, we just print the message and depend on the PF driver to clear
things up on our behalf.

Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Linux gives us a function to copy Ethernet MAC addresses, let's use it.

Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove the filter created by the firmware with the default MAC address it
reads out of the NVM storage and a promiscuous VLAN tag and replace it
with a filter that will not accept tagged packets by default.  The system
must request a VLAN tag packet filter to get packets with that tag.

Change-ID: I119e6c3603a039bd68282ba31bf26f33a575490a
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently if the firmware reports DCB capability the driver enables
I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver
inserts a tag when transmitting a packet from the port even if there
are no DCB traffic classes configured at the port.

This patch adds a new flag I40E_FLAG_DCB_CAPABLE that will be set
when the DCB capability is present and the existing flag
I40E_FLAG_DCB_ENABLED will be set only if there are more than one
traffic classes configured at the port.

Change-ID: I24ccbf53ef293db2eba80c8a9772acf729795bd5
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

If the device is down, there's no place to go but up, so don't try to go
down even more. This prevents a CPU soft lock in napi_disable().

Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In XL710 devices we program FD filter's fields from Tx perspective of the flow.
However the user interface exposed in ethtool should be compliant with the
previous generation of drivers where a filter src and dst field are from
the RX perspective. This patch changes the ethtool interface in this regard
to match the other drivers.

Change-ID: Iec6ccddd87357c4fb53ccf33aa0fae699faf70cf
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>