- 29 Dec, 2010 40 commits
-
-
Mauro Carvalho Chehab authored
It seems that a wrong cut-and-paste error were done here. Reported-by:
Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mariusz Białończyk authored
The patch fixes the rc-tbs-nec table after converting drivers/media/video/cx88 to ir-core (commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec). It is also adds two missing buttons (10- and 10+) with its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN). [mchehab@redhat.com: move keycode numbers to 0x1b8/0x1b9 as requested by the input Maintainer] Signed-off-by:
Mariusz Białończyk <manio@skyboo.net> Signed-off-by:
-
Dan Carpenter authored
Sparse complains because there are no __user annotations. drivers/media/rc/lirc_dev.c:156:27: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) drivers/media/rc/lirc_dev.c:156:27: expected int ( *read )( ... ) drivers/media/rc/lirc_dev.c:156:27: got int ( extern [toplevel] *<noident> )( ... ) Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
David Härdeman authored
Fix some minor comments etc which are leftover from the old naming scheme. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
Similarly to saa7134, bttv_ir has two timers, only one of which is used at a time and which serve the same purpose. Merge them. Signed-off-by:
-
David Härdeman authored
bttv_ir is more consistent with all other structs used in the same driver. Also, clean up the struct to remove commented out members and the work_struct which is unused. [mchehab@redhat.com: fix a warning at bttv_rc5_timer_end] Signed-off-by:
-
David Härdeman authored
Both timers are used for a similar purpose. Merging them allows for some minor simplifications. Signed-off-by:
-
David Härdeman authored
Mostly using appropriate data types and constants (e.g. int -> bool). Signed-off-by:
-
David Härdeman authored
Using the full keycode for BeholdTV hardware makes another module parameter unnecessary. Signed-off-by:
-
David Härdeman authored
ir_rc5_remote_gap is a leftover from ir-common, remove it. Signed-off-by:
-
Hans de Goede authored
Failure to submit an urb is a fatal error, make isoc_init return an error when this happens rather then only log it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
isoc_cleanup contains a check to not set the altsetting to alt0 when the device was unplugged, but the check currently is buggy, and causes the alt setting to only be set to 0 if an error occured while streaming. Signed-off-by:
-
Hans de Goede authored
pwc was starting streaming on /dev/video# open rather then on STREAM_ON. Now that the v4l1 compat code is removed from the pwc driver there is no reason left to do this. So this patch changes the pwc driver to delay starting the isoc stream (and thus using valuable usb bandwidth) until the application does a STREAM_ON Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb/frontends/stb6100.c:120: warning: ‘stb6100_normalise_regs’ defined but not used Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Remote keytables had different names all over the place. Part of the fault is due to a bad naming when rc subsystem was created, but there were lots of old names that were still here. Use a common standard for everything. Patch generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done Signed-off-by: -
Mauro Carvalho Chehab authored
The struct that describes a rc mapping had an weird and long name. We should properly name it, to make easier for developers to work with it, and to avoid confusion. Basically, generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode_table,rc_map,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_tab,rc_map,g <$i >a && mv a $i; done (and manually fixed where needed) Signed-off-by: -
Mauro Carvalho Chehab authored
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: -
Mauro Carvalho Chehab authored
rc_map is confusing, as it may be understood as another thing. Properly rename the field to indicate its usage. Signed-off-by: -
Mauro Carvalho Chehab authored
Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: -
Mauro Carvalho Chehab authored
The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Something weird happened with commit 740069e6e043403199dbe2b42256722fb814f6ae. Instead of dong the right thing, it got somehow corrupted and reverted the rc changes. Thanks to David Härdeman for pointing me about the problem. This patch should be merged with 740069e6e04 before sending upstream. Signed-off-by: -
Manu Abraham authored
- Some badly written applications in conjuction with certain SEC devices do send too many messages causing the DiSEqC bus to get congested. As a result, the end devices do get confused and hence do not respond. The issue was found by Julian Scheel. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
- Reduce the amount of white noise present, which causes the demodulator a significant time to acquire a frontend lock on a whole. Frontend shows a large significant improvement in performance. Thanks to Peter Nayler for helping to identify the potential hotspots and fixing them. Signed-off-by:
-
Ben Hutchings authored
This function is declared extern and exported, and should not be given a generic name which may conflict with gpiolib in future. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Bjørn Mork authored
Convert the driver to use the dvb_attach macro to avoid the hard dependency on the frontend drivers. The hard dependecy will result in loading a number of unused frontends, and unwanted automatic dereferencing. This fixes a bug where unloading the mantis driver will derefence any attached frontend twice, which will cause an oops if the same frontend is used by another driver. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Marko Ristola authored
After dvb-core has called mantis-fe->stop_feed(dvbdmxfeed) the last time (count to zero), no data should ever be copied with dvb_dmx_swfilter() by a tasklet: the target structure might be in an unusable state. Caller of mantis_fe->stop_feed() assumes that feeding is stopped after stop_feed() has been called, ie. dvb_dmx_swfilter() isn't running, and won't be called. There is a risk that dvb_dmx_swfilter() references freed resources (memory or spinlocks or ???) causing instabilities. Thus tasklet_disable(&mantis->tasklet) must be called inside of mantis-fe->stop_feed(dvbdmxfeed) when necessary. Signed-off-by:
Marko Ristola <marko.ristola@kolumbus.fi> Signed-off-by:
-
Manu Abraham authored
use the macro to make modules auto-loadable Thanks to Ozan Çağlayan <ozan@pardus.org.tr> for pointing it out Signed-off-by:
-
Wolfram Sang authored
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Wolfram Sang authored
The i2c-core does this already. Reported-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jesper Juhl authored
Hi, The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from drivers/media/ Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Randy Dunlap authored
timblogiw uses dma() interfaces and it selects TIMB_DMA for that support. However, drivers/dma/ is not built unless CONFIG_DMA_ENGINE is enabled, so select/enable that symbol also. drivers/built-in.o: In function `timblogiw_close': timblogiw.c:(.text+0x4419fe): undefined reference to `dma_release_channel' drivers/built-in.o: In function `buffer_release': timblogiw.c:(.text+0x441a8d): undefined reference to `dma_sync_wait' drivers/built-in.o: In function `timblogiw_open': timblogiw.c:(.text+0x44212b): undefined reference to `__dma_request_channel' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Richard Röjfors authored
This patch defines platform data for the video-in driver and adds it to all configurations of timberdale. Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Acked-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Richard Röjfors authored
This patch adds the timberdale video-in driver. The video IP of timberdale delivers the video data via DMA. The driver uses the DMA api to handle DMA transfers, and make use of the V4L2 video buffers to handle buffers against user space. If available the driver uses an encoder to get/set the video standard Signed-off-by:
-
Joe Perches authored
Fix several defects with bad line continuation uses that introduce whitespace. Fix several defects with lines missing "\n". Standardize prefixes via pr_fmt. Remove internal cx25821 prefixes. Standardize :%s():" ... __func__ uses. Coalesce long formats. Add KERN_<level> prefixes via pr_<level> to printks. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Matthias Schwarzott authored
It seems that ix2505v driver ignores a i2c error in ix2505v_read_status_reg. This looks like a typing error using (ret = 1) instead of correct (ret == 1). Acked-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Cc: stable@kernel.org Signed-off-by:
-
Jean Delvare authored
Signed-off-by:
-
Jean Delvare authored
Usage of templates for large structures is a bad idea, as it wastes a lot of space. Manually initializing the few fields we need is way more efficient. Also set the algorithm data const, use strlcpy instead of strcpy, fix a small race (device data must always be set before registering said device) and properly return error on adapter registration failure. Signed-off-by:
-
