1. 29 Jul, 2013 6 commits
  2. 28 Jul, 2013 1 commit
  3. 26 Jul, 2013 4 commits
  4. 25 Jul, 2013 15 commits
  5. 24 Jul, 2013 1 commit
  6. 23 Jul, 2013 2 commits
    • Bjørn Mork's avatar
      usb: option: add TP-LINK MA260 · 94190301
      Bjørn Mork authored
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      94190301
    • Alexandr \"Sky\" Ivanov's avatar
      USB: option: add D-Link DWM-152/C1 and DWM-156/C1 · ca247635
      Alexandr \"Sky\" Ivanov authored
      Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices.
      
      DWM-152/C1:
      T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=07d1 ProdID=3e01 Rev= 0.00
      S:  Product=USB Configuration
      S:  SerialNumber=1234567890ABCDEF
      C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
      I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
      E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
      E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      
      DWM-156/C1:
      T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=07d1 ProdID=3e02 Rev= 0.00
      S:  Product=DataCard Device
      S:  SerialNumber=1234567890ABCDEF
      C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
      I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
      E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
      I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
      E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
      Signed-off-by: default avatarAlexandr Ivanov <alexandr.sky@gmail.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ca247635
  7. 22 Jul, 2013 7 commits
  8. 17 Jul, 2013 1 commit
  9. 16 Jul, 2013 3 commits
    • Alan Stern's avatar
      USB: global suspend and remote wakeup don't mix · e583d9db
      Alan Stern authored
      The hub driver was recently changed to use "global" suspend for system
      suspend transitions on non-SuperSpeed buses.  This means that we don't
      suspend devices individually by setting the suspend feature on the
      upstream hub port; instead devices all go into suspend automatically
      when the root hub stops transmitting packets.  The idea was to save
      time and to avoid certain kinds of wakeup races.
      
      Now it turns out that many hubs are buggy; they don't relay wakeup
      requests from a downstream port to their upstream port if the
      downstream port's suspend feature is not set (depending on the speed
      of the downstream port, whether or not the hub is enabled for remote
      wakeup, and possibly other factors).
      
      We can't have hubs dropping wakeup requests.  Therefore this patch
      goes partway back to the old policy: It sets the suspend feature for a
      port if the device attached to that port or any of its descendants is
      enabled for wakeup.  People will still be able to benefit from the
      time savings if they don't care about wakeup and leave it disabled on
      all their devices.
      
      In order to accomplish this, the patch adds a new field to the usb_hub
      structure: wakeup_enabled_descendants is a count of how many devices
      below a suspended hub are enabled for remote wakeup.  A corresponding
      new subroutine determines the number of wakeup-enabled devices at or
      below an arbitrary suspended USB device.
      
      This should be applied to the 3.10 stable kernel.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Reported-and-tested-by: default avatarToralf Förster <toralf.foerster@gmx.de>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e583d9db
    • Alan Stern's avatar
      USB: move the definition of USB_MAXCHILDREN · 36ff66db
      Alan Stern authored
      The USB_MAXCHILDREN symbol is used in include/uapi/linux/usb/ch11.h, a
      user-mode header, even though it is defined in include/linux/usb.h,
      which is kernel-only.  This causes compile-time errors when user
      programs try to #include linux/usb/ch11.h.
      
      This patch fixes the problem by moving the definition of USB_MAXCHILDREN
      into ch11.h.  It also gets rid of unneeded parentheses.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      36ff66db
    • Greg Kroah-Hartman's avatar
      Merge tag 'fixes-for-v3.11-rc1' of... · 39c24270
      Greg Kroah-Hartman authored
      Merge tag 'fixes-for-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
      
      Felipe writes:
      
      usb: fixes for v3.11-rc1
      
      Quite a few changes going on here. They have been
      boot tested on OMAP5 and compile tested on ARM and x86
      with different defconfigs.
      
      Many gadget drivers got a depends on HAS_DMA in order
      to prevent build failures on !HAS_DMA architectures.
      
      DWC3 learned how to allow a gadget driver to be modprobed
      after an unsuccessful modprobe of another gadget driver. It
      also got a fix to a wrong bit mask in dwc3_event_type, and
      learns to return proper error codes from failed usb3_phy
      initialization.
      
      RNDIS function driver can now be built with configfs.
      
      at91_udc now knows that we need to prepare the clock
      before enabling it.
      
      renesas_usbhs now lets gadget drivers be modprobed
      multiple times.
      
      phy-omap-usb3 got a fix for the DPLL settings.
      
      mv_u3d_core now passes the correct cookie to free_irq().
      
      fotg210-udc got Section mismatch fixes.
      Signed-of-by: default avatarFelipe Balbi <balbi@ti.com>
      39c24270