Pull x86 EFI changes from Ingo Molnar:
 "This consists of two main parts:

   - New static EFI runtime services virtual mapping layout which is
     groundwork for kexec support on EFI (Borislav Petkov)

   - EFI kexec support itself (Dave Young)"

* 'x86-efi-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/efi: parse_efi_setup() build fix
  x86: ksysfs.c build fix
  x86/efi: Delete superfluous global variables
  x86: Reserve setup_data ranges late after parsing memmap cmdline
  x86: Export x86 boot_params to sysfs
  x86: Add xloadflags bit for EFI runtime support on kexec
  x86/efi: Pass necessary EFI data for kexec via setup_data
  efi: Export EFI runtime memory mapping to sysfs
  efi: Export more EFI table variables to sysfs
  x86/efi: Cleanup efi_enter_virtual_mode() function
  x86/efi: Fix off-by-one bug in EFI Boot Services reservation
  x86/efi: Add a wrapper function efi_map_region_fixed()
  x86/efi: Remove unused variables in __map_region()
  x86/efi: Check krealloc return value
  x86/efi: Runtime services virtual mapping
  x86/mm/cpa: Map in an arbitrary pgd
  x86/mm/pageattr: Add last levels of error path
  x86/mm/pageattr: Add a PUD error unwinding path
  x86/mm/pageattr: Add a PTE pagetable populating function
  x86/mm/pageattr: Add a PMD pagetable populating function
  ...

Pull x86 TLB detection update from Ingo Molnar:
 "A single change that extends our TLB cache size detection+reporting
  code"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Detect more TLB configuration

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu, amd: Fix a shadowed variable situation
  um, x86: Fix vDSO build
  x86: Delete non-required instances of include <linux/init.h>
  x86, realmode: Pointer walk cleanups, pull out invariant use of __pa()
  x86/traps: Clean up error exception handler definitions

Pull x86/build changes from Ingo Molnar:
 "Misc smaller improvements"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Move intcall() to the .inittext section
  x86, boot: Use .code16 instead of .code16gcc
  x86, sparse: Do not force removal of __user when calling copy_to/from_user_nocheck()

Pull x86/asm changes from Ingo Molnar:
 "Misc optimizations"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Slightly tweak the access_ok() C variant for better code
  x86: Replace assembly access_ok() with a C variant
  x86-64, copy_user: Use leal to produce 32-bit results
  x86-64, copy_user: Remove zero byte check before copy user buffer.

Pull x86/apic changes from Ingo Molnar:
 "Two main changes:

   - improve local APIC Error Status Register reporting robustness

   - add the 'disable_cpu_apicid=x' boot parameter for kexec booting"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos
  x86, apic, kexec: Add disable_cpu_apicid kernel parameter
  x86/apic: Read Error Status Register correctly

Pull timer changes from Ingo Molnar:
  - ARM clocksource/clockevent improvements and fixes
  - generic timekeeping updates: TAI fixes/improvements, cleanups
  - Posix cpu timer cleanups and improvements
  - dynticks updates: full dynticks bugfixes, optimizations and cleanups

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  clocksource: Timer-sun5i: Switch to sched_clock_register()
  timekeeping: Remove comment that's mostly out of date
  rtc-cmos: Add an alarm disable quirk
  timekeeper: fix comment typo for tk_setup_internals()
  timekeeping: Fix missing timekeeping_update in suspend path
  timekeeping: Fix CLOCK_TAI timer/nanosleep delays
  tick/timekeeping: Call update_wall_time outside the jiffies lock
  timekeeping: Avoid possible deadlock from clock_was_set_delayed
  timekeeping: Fix potential lost pv notification of time change
  timekeeping: Fix lost updates to tai adjustment
  clocksource: sh_cmt: Add clk_prepare/unprepare support
  clocksource: bcm_kona_timer: Remove unused bcm_timer_ids
  clocksource: vt8500: Remove deprecated IRQF_DISABLED
  clocksource: tegra: Remove deprecated IRQF_DISABLED
  clocksource: misc drivers: Remove deprecated IRQF_DISABLED
  clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
  clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()
  clocksource: armada-370-xp: Enable timer divider only when needed
  clocksource: clksrc-of: Warn if no clock sources are found
  clocksource: orion: Switch to sched_clock_register()
  ...

Pull scheduler changes from Ingo Molnar:

 - Add the initial implementation of SCHED_DEADLINE support: a real-time
   scheduling policy where tasks that meet their deadlines and
   periodically execute their instances in less than their runtime quota
   see real-time scheduling and won't miss any of their deadlines.
   Tasks that go over their quota get delayed (Available to privileged
   users for now)

 - Clean up and fix preempt_enable_no_resched() abuse all around the
   tree

 - Do sched_clock() performance optimizations on x86 and elsewhere

 - Fix and improve auto-NUMA balancing

 - Fix and clean up the idle loop

 - Apply various cleanups and fixes

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  sched: Fix __sched_setscheduler() nice test
  sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
  sched: Fix up attr::sched_priority warning
  sched: Fix up scheduler syscall LTP fails
  sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
  sched/core: Fix htmldocs warnings
  sched/deadline: No need to check p if dl_se is valid
  sched/deadline: Remove unused variables
  sched/deadline: Fix sparse static warnings
  m68k: Fix build warning in mac_via.h
  sched, thermal: Clean up preempt_enable_no_resched() abuse
  sched, net: Fixup busy_loop_us_clock()
  sched, net: Clean up preempt_enable_no_resched() abuse
  sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
  sched/preempt, locking: Rework local_bh_{dis,en}able()
  sched/clock, x86: Avoid a runtime condition in native_sched_clock()
  sched/clock: Fix up clear_sched_clock_stable()
  sched/clock, x86: Use a static_key for sched_clock_stable
  sched/clock: Remove local_irq_disable() from the clocks
  sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs
  ...

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Add Intel RAPL energy counter support (Stephane Eranian)
   - Clean up uprobes (Oleg Nesterov)
   - Optimize ring-buffer writes (Peter Zijlstra)

  Tooling side changes, user visible:

   - 'perf diff':
     - Add column colouring improvements (Ramkumar Ramachandra)

  - 'perf kvm':
     - Add guest related improvements, including allowing to specify a
       directory with guest specific /proc information (Dongsheng Yang)
     - Add shell completion support (Ramkumar Ramachandra)
     - Add '-v' option (Dongsheng Yang)
     - Support --guestmount (Dongsheng Yang)

   - 'perf probe':
     - Support showing source code, asking for variables to be collected
       at probe time and other 'perf probe' operations that use DWARF
       information.

       This supports only binaries with debugging information at this
       time, detached debuginfo (aka debuginfo packages) support should
       come in later patches (Masami Hiramatsu)

   - 'perf record':
     - Rename --no-delay option to --no-buffering, better reflecting its
       purpose and freeing up '--delay' to take the place of
       '--initial-delay', so that 'record' and 'stat' are consistent
       (Arnaldo Carvalho de Melo)
     - Default the -t/--thread option to no inheritance (Adrian Hunter)
     - Make per-cpu mmaps the default (Adrian Hunter)

   - 'perf report':
     - Improve callchain processing performance (Frederic Weisbecker)
     - Retain bfd reference to lookup source line numbers, greatly
       optimizing, among other use cases, 'perf report -s srcline'
       (Adrian Hunter)
     - Improve callchain processing performance even more (Namhyung Kim)
     - Add a perf.data file header window in the 'perf report' TUI,
       associated with the 'i' hotkey, providing a counterpart to the
       --header option in the stdio UI (Namhyung Kim)

   - 'perf script':
     - Add an option in 'perf script' to print the source line number
       (Adrian Hunter)
     - Add --header/--header-only options to 'script' and 'report', the
       default is not tho show the header info, but as this has been the
       default for some time, leave a single line explaining how to
       obtain that information (Jiri Olsa)
     - Add options to show comm, fork, exit and mmap PERF_RECORD_ events
       (Namhyung Kim)
     - Print callchains and symbols if they exist (David Ahern)

   - 'perf timechart'
     - Add backtrace support to CPU info
     - Print pid along the name
     - Add support for CPU topology
     - Add new option --highlight'ing threads, be it by name or, if a
       numeric value is provided, that run more than given duration
       (Stanislav Fomichev)

   - 'perf top':
     - Make 'perf top -g' refer to callchains, for consistency with
       other tools (David Ahern)

   - 'perf trace':
     - Handle old kernels where the "raw_syscalls" tracepoints were
       called plain "syscalls" (David Ahern)
     - Remove thread summary coloring, by Pekka Enberg.
     - Honour -m option in 'trace', the tool was offering the option to
       set the mmap size, but wasn't using it when doing the actual mmap
       on the events file descriptors (Jiri Olsa)

   - generic:
     - Backport libtraceevent plugin support (trace-cmd repository, with
       plugins for jbd2, hrtimer, kmem, kvm, mac80211, sched_switch,
       function, xen, scsi, cfg80211 (Jiri Olsa)
     - Print session information only if --stdio is given (Namhyung Kim)

  Tooling side changes, developer visible (plumbing):

   - Improve 'perf probe' exit path, release resources (Masami
     Hiramatsu)
   - Improve libtraceevent plugins exit path, allowing the registering
     of an unregister handler to be called at exit time (Namhyung Kim)
   - Add an alias to the build test makefile (make -C tools/perf
     build-test) (Namhyung Kim)
   - Get rid of die() and friends (good riddance!) in libtraceevent
     (Namhyung Kim)
   - Fix cross build problems related to pkgconfig and CROSS_COMPILE not
     being propagated to the feature tests, leading to features being
     tested in the host and then being enabled on the target (Mark
     Rutland)
   - Improve forked workload error reporting by sending the errno in the
     signal data queueing integer field, using sigqueue and by doing the
     signal setup in the evlist methods, removing open coded equivalents
     in various tools (Arnaldo Carvalho de Melo)
   - Do more auto exit cleanup chores in the 'evlist' destructor, so
     that the tools don't have to all do that sequence (Arnaldo Carvalho
     de Melo)
   - Pack 'struct perf_session_env' and 'struct trace' (Arnaldo Carvalho
     de Melo)
   - Add test for building detached source tarballs (Arnaldo Carvalho de
     Melo)
   - Move some header files (tools/perf/ to tools/include/ to make them
     available to other tools/ dwelling codebases (Namhyung Kim)
   - Move logic to warn about kptr_restrict'ed kernels to separate
     function in 'report' (Arnaldo Carvalho de Melo)
   - Move hist browser selection code to separate function (Arnaldo
     Carvalho de Melo)
   - Move histogram entries collapsing to separate function (Arnaldo
     Carvalho de Melo)
   - Introduce evlist__for_each() & friends (Arnaldo Carvalho de Melo)
   - Automate setup of FEATURE_CHECK_(C|LD)FLAGS-all variables (Jiri
     Olsa)
   - Move arch setup into seprate Makefile (Jiri Olsa)
   - Make libtraceevent install target quieter (Jiri Olsa)
   - Make tests/make output more compact (Jiri Olsa)
   - Ignore generated files in feature-checks (Chunwei Chen)
   - Introduce pevent_filter_strerror() in libtraceevent, similar in
     purpose to libc's strerror() function (Namhyung Kim)
   - Use perf_data_file methods to write output file in 'record' and
     'inject' (Jiri Olsa)
   - Use pr_*() functions where applicable in 'report' (Namhyumg Kim)
   - Add 'machine' 'addr_location' struct to have full picture (machine,
     thread, map, symbol, addr) for a (partially) resolved address,
     reducing function signatures (Arnaldo Carvalho de Melo)
   - Reduce code duplication in the histogram entry creation/insertion
     (Arnaldo Carvalho de Melo)
   - Auto allocate annotation histogram data structures (Arnaldo
     Carvalho de Melo)
   - No need to test against NULL before calling free, also set freed
     memory in struct pointers to NULL, to help fixing use after free
     bugs (Arnaldo Carvalho de Melo)
   - Rename some struct DSO binary_type related members and methods, to
     clarify its purpose and need for differentiation (symtab_type, ie
     one is about the files .text, CFI, etc, i.e.  its binary contents,
     and the other is about where the symbol table came from (Arnaldo
     Carvalho de Melo)
   - Convert to new topic libraries, starting with an API one (sysfs,
     debugfs, etc), renaming liblk in the process (Borislav Petkov)
   - Get rid of some more panic() like error handling in libtraceevent.
     (Namhyung Kim)
   - Get rid of panic() like calls in libtraceevent (Namyung Kim)
   - Start carving out symbol parsing routines (perf, just moving
     routines to topic files in tools/lib/symbol/, tools that want to
     use it need to integrate it directly, ie no
     tools/lib/symbol/Makefile is provided (Arnaldo Carvalho de Melo)
   - Assorted refactoring patches, moving code around and adding utility
     evlist methods that will be used in the IPT patchset (Adrian
     Hunter)
   - Assorted mmap_pages handling fixes (Adrian Hunter)
   - Several man pages typo fixes (Dongsheng Yang)
   - Get rid of several die() calls in libtraceevent (Namhyung Kim)
   - Use basename() in a more robust way, to avoid problems related to
     different system library implementations for that function
     (Stephane Eranian)
   - Remove open coded management of short_name_allocated member (Adrian
     Hunter)
   - Several cleanups in the "dso" methods, constifying some parameters
     and renaming some fields to clarify its purpose (Arnaldo Carvalho
     de Melo)
   - Add per-feature check flags, fixing libunwind related build
     problems on some architectures (Jean Pihet)
   - Do not disable source line lookup just because of one failure.
     (Adrian Hunter)
   - Several 'perf kvm' man page corrections (Dongsheng Yang)
   - Correct the message in feature-libnuma checking, swowing the right
     devel package names for various distros (Dongsheng Yang)
   - Polish 'readn()' function and introduce its counterpart,
     'writen()' (Jiri Olsa)
   - Start moving timechart state from global variables to a 'perf_tool'
     derived 'timechart' struct (Arnaldo Carvalho de Melo)

  ... and lots of fixes and improvements I forgot to list"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
  perf tools: Remove unnecessary callchain cursor state restore on unmatch
  perf callchain: Spare double comparison of callchain first entry
  perf tools: Do proper comm override error handling
  perf symbols: Export elf_section_by_name and reuse
  perf probe: Release all dynamically allocated parameters
  perf probe: Release allocated probe_trace_event if failed
  perf tools: Add 'build-test' make target
  tools lib traceevent: Unregister handler when xen plugin is unloaded
  tools lib traceevent: Unregister handler when scsi plugin is unloaded
  tools lib traceevent: Unregister handler when jbd2 plugin is is unloaded
  tools lib traceevent: Unregister handler when cfg80211 plugin is unloaded
  tools lib traceevent: Unregister handler when mac80211 plugin is unloaded
  tools lib traceevent: Unregister handler when sched_switch plugin is unloaded
  tools lib traceevent: Unregister handler when kvm plugin is unloaded
  tools lib traceevent: Unregister handler when kmem plugin is unloaded
  tools lib traceevent: Unregister handler when hrtimer plugin is unloaded
  tools lib traceevent: Unregister handler when function plugin is unloaded
  tools lib traceevent: Add pevent_unregister_print_function()
  tools lib traceevent: Add pevent_unregister_event_handler()
  tools lib traceevent: fix pointer-integer size mismatch
  ...

Pull IRQ changes from Ingo Molnar:
 "The only change in this cycle is a CPU hotplug related spurious
  warning fix"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Fix kbuild warning in smp_irq_move_cleanup_interrupt()
  x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs

Merge branch 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull strong stackprotector support from Ingo Molnar:
 "This tree adds a CONFIG_CC_STACKPROTECTOR_STRONG=y, a new, stronger
  stack canary checking method supported by the newest GCC versions (4.9
  and later).

  Here's the 'intensity comparison' between the various protection
  modes:

      - defconfig
        11430641 kernel text size
        36110 function bodies

      - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
        11468490 kernel text size (+0.33%)
        1015 of 36110 functions are stack-protected (2.81%)

      - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
        11692790 kernel text size (+2.24%)
        7401 of 36110 functions are stack-protected (20.5%)

  the strong model comes with non-trivial costs, which is why we
  preserved the 'regular' and 'none' models as well"

* 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
  stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures

Pull RCU updates from Ingo Molnar:
 - add RCU torture scripts/tooling
 - static analysis improvements
 - update RCU documentation
 - miscellaneous fixes

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  rcu: Remove "extern" from function declarations in kernel/rcu/rcu.h
  rcu: Remove "extern" from function declarations in include/linux/*rcu*.h
  rcu/torture: Dynamically allocate SRCU output buffer to avoid overflow
  rcu: Don't activate RCU core on NO_HZ_FULL CPUs
  rcu: Warn on allegedly impossible rcu_read_unlock_special() from irq
  rcu: Add an RCU_INITIALIZER for global RCU-protected pointers
  rcu: Make rcu_assign_pointer's assignment volatile and type-safe
  bonding: Use RCU_INIT_POINTER() for better overhead and for sparse
  rcu: Add comment on evaluate-once properties of rcu_assign_pointer().
  rcu: Provide better diagnostics for blocking in RCU callback functions
  rcu: Improve SRCU's grace-period comments
  rcu: Fix CONFIG_RCU_FANOUT_EXACT for odd fanout/leaf values
  rcu: Fix coccinelle warnings
  rcutorture: Stop tracking FSF's postal address
  rcutorture: Move checkarg to functions.sh
  rcutorture: Flag errors and warnings with color coding
  rcutorture: Record results from repeated runs of the same test scenario
  rcutorture: Test summary at end of run with less chattiness
  rcutorture: Update comment in kvm.sh listing typical RCU trace events
  rcutorture: Add tracing-enabled version of TREE08
  ...

Pull core locking changes from Ingo Molnar:
 - futex performance increases: larger hashes, smarter wakeups
 - mutex debugging improvements
 - lots of SMP ordering documentation updates
 - introduce the smp_load_acquire(), smp_store_release() primitives.
   (There are WIP patches that make use of them - not yet merged)
 - lockdep micro-optimizations
 - lockdep improvement: better cover IRQ contexts
 - liblockdep at last. We'll continue to monitor how useful this is

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  futexes: Fix futex_hashsize initialization
  arch: Re-sort some Kbuild files to hopefully help avoid some conflicts
  futexes: Avoid taking the hb->lock if there's nothing to wake up
  futexes: Document multiprocessor ordering guarantees
  futexes: Increase hash table size for better performance
  futexes: Clean up various details
  arch: Introduce smp_load_acquire(), smp_store_release()
  arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h
  arch: Move smp_mb__{before,after}_atomic_{inc,dec}.h into asm/atomic.h
  locking/doc: Rename LOCK/UNLOCK to ACQUIRE/RELEASE
  mutexes: Give more informative mutex warning in the !lock->owner case
  powerpc: Full barrier for smp_mb__after_unlock_lock()
  rcu: Apply smp_mb__after_unlock_lock() to preserve grace periods
  Documentation/memory-barriers.txt: Downgrade UNLOCK+BLOCK
  locking: Add an smp_mb__after_unlock_lock() for UNLOCK+BLOCK barrier
  Documentation/memory-barriers.txt: Document ACCESS_ONCE()
  Documentation/memory-barriers.txt: Prohibit speculative writes
  Documentation/memory-barriers.txt: Add long atomic examples to memory-barriers.txt
  Documentation/memory-barriers.txt: Add needed ACCESS_ONCE() calls to memory-barriers.txt
  Revert "smp/cpumask: Make CONFIG_CPUMASK_OFFSTACK=y usable without debug dependency"
  ...

Pull core debug changes from Ingo Molnar:
 "Currently there are two methods to set the panic_timeout: via
  'panic=X' boot commandline option, or via /proc/sys/kernel/panic.

  This tree adds a third panic_timeout configuration method:
  configuration via Kconfig, via CONFIG_PANIC_TIMEOUT=X - useful to
  distros that generally want their kernel defaults to come with the
  .config.

  CONFIG_PANIC_TIMEOUT defaults to 0, which was the previous default
  value of panic_timeout.

  Doing that unearthed a few arch trickeries regarding arch-special
  panic_timeout values and related complications - hopefully all
  resolved to the satisfaction of everyone"

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  powerpc: Clean up panic_timeout usage
  MIPS: Remove panic_timeout settings
  panic: Make panic_timeout configurable

Pull ktest updates from Steven Rostedt:
 "Here's some basic updates to ktest.pl.  They include:

   - add config to modify the signal to terminate console
   - update to documentation (missing some config options)
   - add KERNEL_VERSION variable to use for other configs
   - add '=~' to let configs eval other configs
   - add BISECT_TRIES to run multiple tests per git bisect good"

* tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add BISECT_TRIES to bisect test
  ktest: Add eval '=~' command to modify variables in config file
  ktest: Add special variable ${KERNEL_VERSION}
  ktest: Add documentation of CLOSE_CONSOLE_SIGNAL
  ktest: Make the signal to terminate the console configurable

Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig update from Steven Rostedt:
 "While debugging the problem with localmodconfig and the ALSA codec
  modules all being set, I discovered a small bug in the dependency
  logic.

  If a config has a dependency based on its setting value,
  localmodcondig misses it.

  For example:

    config FOO
        default y if BAR || ZOO

  If FOO is needed for a module and is set to '=m', and so are BAR or
  ZOO, localmodconfig will not see that BAR or ZOO are also needed for
  the foo module, and will incorrectly disable them"

* tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Add config depends by default settings

Pull hwmon updates from Guenter Roeck:
 "Add support for Kaveri CPUs to k10temp driver.  Add support for S12x0
  to coretemp driver.

  Cleanup and minor fixes in several drivers.  Notable are 'Do not
  return -EAGAIN for low temperatures' to coretemp and 'Re-enable
  logical device mapping for NCT6791 during resume' to nct6775.  Both
  will be sent to -stable, but only after some time in mainline"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (k10temp) Add support for Kaveri CPUs
  hwmon: (sht15) add include guard
  hwmon: (max197) add include guard
  hwmon: (nct6775) Re-enable logical device mapping for NCT6791 during resume
  hwmon: (s3c) Trivial cleanup in hwmon-s3c.h
  hwmon: (coretemp) Do not return -EAGAIN for low temperatures
  hwmon: (da9052) Fix adc to voltage calculation
  hwmon: (coretemp) Refine TjMax detection
  hwmon: (coretemp) Add PCI device ID for CE41x0 CPUs
  hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary
  hwmon: remove DEFINE_PCI_DEVICE_TABLE macro

Pull ia64 Xen removal from Tony Luck:
 "Nobody has been maintaining xen in ia64 for a long time.  Rip it all
  out so people do not waste time making updates to broken/dead code"

* tag 'please-pull-rm_xen' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64/xen: Remove Xen support for ia64

Pull EDAC updates from Borislav Petkov:
 - mpc85xx PCIe error interrupt support
 - misc small enhancements/fixes all over the place.

* tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't try to cancel workqueue when it's never setup
  e752x_edac: Fix pci_dev usage count
  sb_edac: Mark get_mci_for_node_id as static
  EDAC: Mark edac_create_debug_nodes as static
  amd64_edac: Remove "amd64" prefix from static functions
  amd64_edac: Simplify code around decode_bus_error
  amd64_edac: Mark amd64_decode_bus_error as static
  EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
  amd64_edac: Fix condition to verify max channels allowed for F15 M30h
  edac/85xx: Add PCIe error interrupt edac support

Pull Metag architecture changes from James Hogan:
 - A few cleanups and minor bug fixes.
 - Kill SMP single function call IPI.

* tag 'metag-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag/smp: Make boot_secondary() static
  metag: topology: export 'cpu_core_map'
  smp, metag: kill SMP single function call interrupt
  metag: smp: don't set irq regs in do_IPI()
  metag: dma: remove dead code in dma_alloc_init()

Pull m68k updates from Geert Uytterhoeven:
 - Zorro bus cleanups and UAPI revival
 - Bootinfo cleanups and UAPI revival
 - Kexec support
 - Memory size reductions and bug fixes for multi-platform kernels
 - Polled interrupt support for Atari EtherNAT, EtherNEC and NetUSBee
 - Machine-specific random_get_entropy()
 - Defconfig updates and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (46 commits)
  m68k/mac: Make SCC reset work more reliably
  m68k/irq - Use polled IRQ flag for MFP timer cascaded interrupts
  m68k: Update defconfigs for v3.13-rc1
  m68k/defconfig: Enable EARLY_PRINTK
  m68k/mm: kmap spelling/grammar fixes
  m68k: Convert arch/m68k/kernel/traps.c to pr_*()
  m68k: Convert arch/m68k/mm/fault.c to pr_*()
  m68k/mm: Check for mm != NULL in do_page_fault() debug code
  m68k/defconfig: Disable /sbin/hotplug fork-bomb by default
  m68k/atari: Hide RTC_PORT() macro from rtc-cmos
  m68k/amiga,atari: Fix specifying multiple debug= parameters
  m68k/defconfig: Use ext4 for ext2/ext3 file systems
  m68k: Add support to export bootinfo in procfs
  m68k: Add kexec support
  m68k/mac: Mark Mac IIsi ADB driver BROKEN
  m68k/amiga: Provide mach_random_get_entropy()
  m68k: Add infrastructure for machine-specific random_get_entropy()
  m68k/atari: Call paging_init() before nf_init()
  m68k: Remove superfluous inclusions of <asm/bootinfo.h>
  m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h>
  ...

Pull s390 updates from Martin Schwidefsky:
 "The bulk of the s390 updates for v3.14.

  New features are the perf support for the CPU-Measurement Sample
  Facility and the EP11 support for the crypto cards.  And the normal
  cleanups and bug-fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits)
  s390/cpum_sf: fix printk format warnings
  s390: Fix misspellings using 'codespell' tool
  s390/qdio: bridgeport support - CHSC part
  s390: delete new instances of __cpuinit usage
  s390/compat: fix PSW32_USER_BITS definition
  s390/zcrypt: add support for EP11 coprocessor cards
  s390/mm: optimize randomize_et_dyn for !PF_RANDOMIZE
  s390: use IS_ENABLED to check if a CONFIG is set to y or m
  s390/cio: use device_lock to synchronize calls to the ccwgroup driver
  s390/cio: use device_lock to synchronize calls to the ccw driver
  s390/cio: fix unlocked access of online member
  s390/cpum_sf: Add flag to process full SDBs only
  s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function
  s390/cpum_sf: Filter perf events based event->attr.exclude_* settings
  s390/cpum_sf: Detect KVM guest samples
  s390/cpum_sf: Add helper to read TOD from trailer entries
  s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks
  s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur
  s390/pci: reenable per default
  s390/pci/dma: fix accounting of allocated_pages
  ...

Since commit 61b365a5 ("drm/nouveau: populate master subdev pointer
only when fully constructed"), the nouveau_mxm(bios) call will return
NULL, since it's still being called from the constructor.  Instead, pass
the mxm pointer via the unused data field.

See https://bugs.freedesktop.org/show_bug.cgi?id=73791Reported-by: Andreas Reis <andreas.reis@gmail.com>
Tested-by: Andreas Reis <andreas.reis@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull last-minute ACPI fix from Rafael Wysocki:
 "This reverts a commit that causes the Alan Cox' ASUS T100TA to "crash
  and burn" during boot if the Baytrail pinctrl driver is compiled in"

* tag 'acpi-3.13-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs"

Pull perf fixes from Ingo Molnar:

 - an s2ram related fix on AMD systems

 - a perf fault handling bug that is relatively old but which has become
   much easier to trigger in v3.13 after commit e00b12e6 ("perf/x86:
   Further optimize copy_from_user_nmi()")

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10h
  x86, mm, perf: Allow recursive faults from interrupts

The 32-bit sched_clock() interface supports 64 bits since
3.13-rc1. Upgrade to the 64-bit function to allow us to remove
the 32-bit registration interface.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1389922686-6249-1-git-send-email-sboyd@codeaurora.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf improvements and fixes from Arnaldo Carvalho de Melo:

Infrastructure changes:

 * Improve callchain processing by removing unnecessary work. (Frederic Weisbecker)

 * Fix comm override error handling (Frederic Weisbecker)

 * Improve 'perf probe' exit path, release resources (Masami Hiramatsu)

 * Improve libtraceevent plugins exit path, allowing the registering of
   an unregister handler to be called at exit time (Namhyung Kim)

 * Add an alias to the build test makefile (make -C tools/perf build-test)
   (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

For SCC initialization we cannot assume that the control register is in
the correct state to accept a register pointer. So first read from the
control register in order to "sync" up.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

For those cases that it takes several tries to hit a bug, it would be
useful for ktest.pl to try a test multiple times before it considers
the test as a pass. To accomplish this, BISECT_TRIES ktest config
option has been added. It is default to one, as most of the time a
bisect only needs to try a test once. But the user can now up this
to make ktest run a given test multiple times. The first failure
that is detected will set a bisect bad. It only repeats on success.

Note, as with all race bugs, there's no guarantee that if it succeeds,
it is really a good bisect. But it helps in case the bug is somewhat
reliable.

You can set BISECT_TRIES to zero, and all tests will be considered
good, unless you also set BISECT_MANUAL.
Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

This reverts commit f6308b36 (ACPI: Add BayTrail SoC GPIO and LPSS
ACPI IDs), because it causes the Alan Cox' ASUS T100TA to "crash and
burn" during boot if the Baytrail pinctrl driver is compiled in.

Fixes: f6308b36 (ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs)
Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Requested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull networking fixes from David Miller:

 1) The value choosen for the new SO_MAX_PACING_RATE socket option on
    parisc was very poorly choosen, let's fix it while we still can.
    From Eric Dumazet.

 2) Our generic reciprocal divide was found to handle some edge cases
    incorrectly, part of this is encoded into the BPF as deep as the JIT
    engines themselves.  Just use a real divide throughout for now.
    From Eric Dumazet.

 3) Because the initial lookup is lockless, the TCP metrics engine can
    end up creating two entries for the same lookup key.  Fix this by
    doing a second lookup under the lock before we actually create the
    new entry.  From Christoph Paasch.

 4) Fix scatter-gather list init in usbnet driver, from Bjørn Mork.

 5) Fix unintended 32-bit truncation in cxgb4 driver's bit shifting.
    From Dan Carpenter.

 6) Netlink socket dumping uses the wrong socket state for timewait
    sockets.  Fix from Neal Cardwell.

 7) Fix netlink memory leak in ieee802154_add_iface(), from Christian
    Engelmayer.

 8) Multicast forwarding in ipv4 can overflow the per-rule reference
    counts, causing all multicast traffic to cease.  Fix from Hannes
    Frederic Sowa.

 9) via-rhine needs to stop all TX queues when it resets the device,
    from Richard Weinberger.

10) Fix RDS per-cpu accesses broken by the this_cpu_* conversions.  From
    Gerald Schaefer.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions
  parisc: fix SO_MAX_PACING_RATE typo
  ipv6: simplify detection of first operational link-local address on interface
  tcp: metrics: Avoid duplicate entries with the same destination-IP
  net: rds: fix per-cpu helper usage
  e1000e: Fix compilation warning when !CONFIG_PM_SLEEP
  bpf: do not use reciprocal divide
  be2net: add dma_mapping_error() check for dma_map_page()
  bnx2x: Don't release PCI bars on shutdown
  net,via-rhine: Fix tx_timeout handling
  batman-adv: fix batman-adv header overhead calculation
  qlge: Fix vlan netdev features.
  net: avoid reference counter overflows on fib_rules in multicast forwarding
  dm9601: add USB IDs for new dm96xx variants
  MAINTAINERS: add virtio-dev ML for virtio
  ieee802154: Fix memory leak in ieee802154_add_iface()
  net: usbnet: fix SG initialisation
  inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets
  cxgb4: silence shift wrapping static checker warning

The s390 bpf jit compiler emits the signed divide instructions "dr" and "d"
for unsigned divisions.
This can cause problems: the dividend will be zero extended to a 64 bit value
and the divisor is the 32 bit signed value as specified A or X accumulator,
even though A and X are supposed to be treated as unsigned values.

The divide instrunctions will generate an exception if the result cannot be
expressed with a 32 bit signed value.
This is the case if e.g. the dividend is 0xffffffff and the divisor either 1
or also 0xffffffff (signed: -1).

To avoid all these issues simply use unsigned divide instructions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SO_MAX_PACING_RATE definition on parisc got a typo.
Its not too late to fix it, before 3.13 is official.

Fixes: 62748f32 ("net: introduce SO_MAX_PACING_RATE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 1ec047eb ("ipv6: introduce per-interface counter for
dad-completed ipv6 addresses") I build the detection of the first
operational link-local address much to complex. Additionally this code
now has a race condition.

Replace it with a much simpler variant, which just scans the address
list when duplicate address detection completes, to check if this is
the first valid link local address and send RS and MLD reports then.

Fixes: 1ec047eb ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses")
Reported-by: Jiri Pirko <jiri@resnulli.us>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because the tcp-metrics is an RCU-list, it may be that two
soft-interrupts are inside __tcp_get_metrics() for the same
destination-IP at the same time. If this destination-IP is not yet part of
the tcp-metrics, both soft-interrupts will end up in tcpm_new and create
a new entry for this IP.
So, we will have two tcp-metrics with the same destination-IP in the list.

This patch checks twice __tcp_get_metrics(). First without holding the
lock, then while holding the lock. The second one is there to confirm
that the entry has not been added by another soft-irq while waiting for
the spin-lock.

Fixes: 51c5d0c4 (tcp: Maintain dynamic metrics in local cache.)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit ae4b46e9 "net: rds: use this_cpu_* per-cpu helper" broke per-cpu
handling for rds. chpfirst is the result of __this_cpu_read(), so it is
an absolute pointer and not __percpu. Therefore, __this_cpu_write()
should not operate on chpfirst, but rather on cache->percpu->first, just
like __this_cpu_read() did before.

Cc: <stable@vger.kernel.org> # 3.8+
Signed-off-byd Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull namespace fixes from Eric Biederman:
 "This is a set of 3 regression fixes.

  This fixes /proc/mounts when using "ip netns add <netns>" to display
  the actual mount point.

  This fixes a regression in clone that broke lxc-attach.

  This fixes a regression in the permission checks for mounting /proc
  that made proc unmountable if binfmt_misc was in use.  Oops.

  My apologies for sending this pull request so late.  Al Viro gave
  interesting review comments about the d_path fix that I wanted to
  address in detail before I sent this pull request.  Unfortunately a
  bad round of colds kept from addressing that in detail until today.
  The executive summary of the review was:

  Al: Is patching d_path really sufficient?
      The prepend_path, d_path, d_absolute_path, and __d_path family of
      functions is a really mess.

  Me: Yes, patching d_path is really sufficient.  Yes, the code is mess.
      No it is not appropriate to rewrite all of d_path for a regression
      that has existed for entirely too long already, when a two line
      change will do"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  vfs: Fix a regression in mounting proc
  fork:  Allow CLONE_PARENT after setns(CLONE_NEWPID)
  vfs: In d_path don't call d_dname on a mount point

Pull KVM fix from Paolo Bonzini:
 "Fix for a brown paper bag bug.  Thanks to Drew Jones for noticing"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: fix apic_base enable check

If a new callchain branch doesn't match a single entry of the node that
it is given against comparison in append_chain(), then the cursor is
expected to be at the same position as it was before the comparison
loop.

As such, there is no need to restore the cursor position on exit in case
of non matching branches.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1389713836-13375-4-git-send-email-fweisbec@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>