- 16 Nov, 2022 8 commits
-
-
Gabriel Krisman Bertazi authored
When a queue is awaken, the wake_index written by sbq_wake_ptr currently keeps pointing to the same queue. On the next wake up, it will thus retry the same queue, which is unfair to other queues, and can lead to starvation. This patch, moves the index update to happen before the queue is returned, such that it will now try a different queue first on the next wake up, improving fairness. Fixes: 4f8126bb ("sbitmap: Use single per-bitmap counting to wake up queued tags") Reported-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20221115224553.23594-2-krisman@suse.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
While the block device code should switch to implementing ->writepages instead of ->writepage eventually, the current implementation is entirely pointless as it does the same looping over ->writepage as the generic code if no ->writepages is present. Remove blkdev_writepages so that we can eventually unexport generic_writepages. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221116132035.2192924-1-hch@lst.deSigned-off-by:
-
Pavel Begunkov authored
Now we can use IOCB_ALLOC_CACHE not only for iopoll'ed reads/write but also for normal IRQ driven I/O. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/fb8bd092ed5a4a3b037e84e4777074d07aa5639a.1667384020.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
The downside of the bio pcpu cache is that bios of a cpu will be never freed unless there is new I/O issued from that cpu. We currently keep max 512 bios, which feels too much, half it. Signed-off-by:
-
Pavel Begunkov authored
This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever currently it's only limited to iopoll. Instead of guarding the list with irq toggling on alloc, which is expensive, it keeps an additional irq-safe list from which bios are spliced in batches to ammortise overhead. On the put side it toggles irqs, but in many cases they're already disabled and so cheap. Signed-off-by:
-
Pavel Begunkov authored
Extract a helper out of bio_put for recycling into percpu caches. It's a preparation patch without functional changes. Signed-off-by:
-
Pavel Begunkov authored
Biosets keep a mempool, so as long as requests complete we can always can allocate and have forward progress. Percpu bio caches break that assumptions as we may complete into the cache of one CPU and after try and fail to allocate with another CPU. We also can't grab from another CPU's cache without tricky sync. If we're allocating with a bio while the mempool is undersaturated, remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool. It might try to free into mempool more requests than required, but assuming than there is no memory starvation in the system it'll stabilise and never hit that path. Signed-off-by:
-
Pavel Begunkov authored
Introduce a helper mempool_is_saturated(), which tells if the mempool is under-filled or not. We need it to figure out whether it should be freed right into the mempool or could be cached with top level caches. Signed-off-by:
-
- 14 Nov, 2022 11 commits
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.2/block Pull MD fixes from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid1: stop mdx_raid1 thread when raid1 array run failed md/raid5: use bdev_write_cache instead of open coding it md: fix a crash in mempool_free md/raid0, raid10: Don't set discard sectors for request queue md/bitmap: Fix bitmap chunk size overflow issues md: introduce md_ro_state md: factor out __md_set_array_info() lib/raid6: drop RAID6_USE_EMPTY_ZERO_PAGE raid5-cache: use try_cmpxchg in r5l_wake_reclaim drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
-
Jiang Li authored
fail run raid1 array when we assemble array with the inactive disk only, but the mdx_raid1 thread were not stop, Even if the associated resources have been released. it will caused a NULL dereference when we do poweroff. This causes the following Oops: [ 287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070 [ 287.594762] #PF: supervisor read access in kernel mode [ 287.599912] #PF: error_code(0x0000) - not-present page [ 287.605061] PGD 0 P4D 0 [ 287.607612] Oops: 0000 [#1] SMP NOPTI [ 287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G U 5.10.146 #0 [ 287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022 [ 287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod] [ 287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ...... [ 287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202 [ 287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000 [ 287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800 [ 287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff [ 287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800 [ 287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500 [ 287.692052] FS: 0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000 [ 287.700149] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0 [ 287.713033] Call Trace: [ 287.715498] raid1d+0x6c/0xbbb [raid1] [ 287.719256] ? __schedule+0x1ff/0x760 [ 287.722930] ? schedule+0x3b/0xb0 [ 287.726260] ? schedule_timeout+0x1ed/0x290 [ 287.730456] ? __switch_to+0x11f/0x400 [ 287.734219] md_thread+0xe9/0x140 [md_mod] [ 287.738328] ? md_thread+0xe9/0x140 [md_mod] [ 287.742601] ? wait_woken+0x80/0x80 [ 287.746097] ? md_register_thread+0xe0/0xe0 [md_mod] [ 287.751064] kthread+0x11a/0x140 [ 287.754300] ? kthread_park+0x90/0x90 [ 287.757974] ret_from_fork+0x1f/0x30 In fact, when raid1 array run fail, we need to do md_unregister_thread() before raid1_free(). Signed-off-by:Jiang Li <jiang.li@ugreen.com> Signed-off-by:
Song Liu <song@kernel.org>
-
Christoph Hellwig authored
Use the bdev_write_cache instead of two equivalent open coded checks. Signed-off-by:
-
Mikulas Patocka authored
There's a crash in mempool_free when running the lvm test shell/lvchange-rebuild-raid.sh. The reason for the crash is this: * super_written calls atomic_dec_and_test(&mddev->pending_writes) and wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev) and bio_put(bio). * so, the process that waited on sb_wait and that is woken up is racing with bio_put(bio). * if the process wins the race, it calls bioset_exit before bio_put(bio) is executed. * bio_put(bio) attempts to free a bio into a destroyed bio set - causing a crash in mempool_free. We fix this bug by moving bio_put before atomic_dec_and_test. We also move rdev_dec_pending before atomic_dec_and_test as suggested by Neil Brown. The function md_end_flush has a similar bug - we must call bio_put before we decrement the number of in-progress bios. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 11557f0067 P4D 11557f0067 PUD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: kdelayd flush_expired_bios [dm_delay] RIP: 0010:mempool_free+0x47/0x80 Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00 RSP: 0018:ffff88910036bda8 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8 RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900 R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000 R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05 FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0 Call Trace: <TASK> clone_endio+0xf4/0x1c0 [dm_mod] clone_endio+0xf4/0x1c0 [dm_mod] __submit_bio+0x76/0x120 submit_bio_noacct_nocheck+0xb6/0x2a0 flush_expired_bios+0x28/0x2f [dm_delay] process_one_work+0x1b4/0x300 worker_thread+0x45/0x3e0 ? rescuer_thread+0x380/0x380 kthread+0xc2/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Xiao Ni authored
It should use disk_stack_limits to get a proper max_discard_sectors rather than setting a value by stack drivers. And there is a bug. If all member disks are rotational devices, raid0/raid10 set max_discard_sectors. So the member devices are not ssd/nvme, but raid0/raid10 export the wrong value. It reports warning messages in function __blkdev_issue_discard when mkfs.xfs like this: [ 4616.022599] ------------[ cut here ]------------ [ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0 [ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0 [ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7 [ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246 [ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080 [ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080 [ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000 [ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000 [ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080 [ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000 [ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0 [ 4616.236689] Call Trace: [ 4616.239428] blkdev_issue_discard+0x52/0xb0 [ 4616.244108] blkdev_common_ioctl+0x43c/0xa00 [ 4616.248883] blkdev_ioctl+0x116/0x280 [ 4616.252977] __x64_sys_ioctl+0x8a/0xc0 [ 4616.257163] do_syscall_64+0x5c/0x90 [ 4616.261164] ? handle_mm_fault+0xc5/0x2a0 [ 4616.265652] ? do_user_addr_fault+0x1d8/0x690 [ 4616.270527] ? do_syscall_64+0x69/0x90 [ 4616.274717] ? exc_page_fault+0x62/0x150 [ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4616.284748] RIP: 0033:0x7f9a55398c6b Signed-off-by:
Xiao Ni <xni@redhat.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Florian-Ewald Mueller authored
- limit bitmap chunk size internal u64 variable to values not overflowing the u32 bitmap superblock structure variable stored on persistent media - assign bitmap chunk size internal u64 variable from unsigned values to avoid possible sign extension artifacts when assigning from a s32 value The bug has been there since at least kernel 4.0. Steps to reproduce it: 1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2 -n2 /dev/rnbd1 /dev/rnbd2 2 resize member device rnbd1 and rnbd2 to 8 TB 3 mdadm --grow /dev/mdx --size=max The bitmap_chunksize will overflow without patch. Cc: stable@vger.kernel.org Signed-off-by:
Florian-Ewald Mueller <florian-ewald.mueller@ionos.com> Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Ye Bin authored
Introduce md_ro_state for mddev->ro, so it is easy to understand. Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Ye Bin authored
Factor out __md_set_array_info(). No functional change. Signed-off-by:
-
Giulio Benetti authored
RAID6_USE_EMPTY_ZERO_PAGE is unused and hardcoded to 0, so let's drop it. Signed-off-by:
Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by:
-
Uros Bizjak authored
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in r5l_wake_reclaim. 86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails. There is no need to re-read the value in the loop. Note that the value from *ptr should be read using READ_ONCE to prevent the compiler from merging, refetching or reordering the read. No functional change intended. Cc: Song Liu <song@kernel.org> Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
-
Li Zhong authored
Check the return value of md_bitmap_get_counter() in case it returns NULL pointer, which will result in a null pointer dereference. v2: update the check to include other dereference Signed-off-by:
Li Zhong <floridsleeves@gmail.com> Signed-off-by:
-
- 11 Nov, 2022 1 commit
-
-
Gabriel Krisman Bertazi authored
sbitmap suffers from code complexity, as demonstrated by recent fixes, and eventual lost wake ups on nested I/O completion. The later happens, from what I understand, due to the non-atomic nature of the updates to wait_cnt, which needs to be subtracted and eventually reset when equal to zero. This two step process can eventually miss an update when a nested completion happens to interrupt the CPU in between the wait_cnt updates. This is very hard to fix, as shown by the recent changes to this code. The code complexity arises mostly from the corner cases to avoid missed wakes in this scenario. In addition, the handling of wake_batch recalculation plus the synchronization with sbq_queue_wake_up is non-trivial. This patchset implements the idea originally proposed by Jan [1], which removes the need for the two-step updates of wait_cnt. This is done by tracking the number of completions and wakeups in always increasing, per-bitmap counters. Instead of having to reset the wait_cnt when it reaches zero, we simply keep counting, and attempt to wake up N threads in a single wait queue whenever there is enough space for a batch. Waking up less than batch_wake shouldn't be a problem, because we haven't changed the conditions for wake up, and the existing batch calculation guarantees at least enough remaining completions to wake up a batch for each queue at any time. Performance-wise, one should expect very similar performance to the original algorithm for the case where there is no queueing. In both the old algorithm and this implementation, the first thing is to check ws_active, which bails out if there is no queueing to be managed. In the new code, we took care to avoid accounting completions and wakeups when there is no queueing, to not pay the cost of atomic operations unnecessarily, since it doesn't skew the numbers. For more interesting cases, where there is queueing, we need to take into account the cross-communication of the atomic operations. I've been benchmarking by running parallel fio jobs against a single hctx nullb in different hardware queue depth scenarios, and verifying both IOPS and queueing. Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel jobs. fio was issuing fixed-size randwrites with qd=64 against nullb, varying only the hardware queue length per test. queue size 2 4 8 16 32 64 6.1-rc2 1681.1K (1.6K) 2633.0K (12.7K) 6940.8K (16.3K) 8172.3K (617.5K) 8391.7K (367.1K) 8606.1K (351.2K) patched 1721.8K (15.1K) 3016.7K (3.8K) 7543.0K (89.4K) 8132.5K (303.4K) 8324.2K (230.6K) 8401.8K (284.7K) The following is a similar experiment, ran against a nullb with a single bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40 parallel fio jobs operating on the same device queue size 2 4 8 16 32 64 6.1-rc2 1081.0K (2.3K) 957.2K (1.5K) 1699.1K (5.7K) 6178.2K (124.6K) 12227.9K (37.7K) 13286.6K (92.9K) patched 1081.8K (2.8K) 1316.5K (5.4K) 2364.4K (1.8K) 6151.4K (20.0K) 11893.6K (17.5K) 12385.6K (18.4K) It has also survived blktests and a 12h-stress run against nullb. I also ran the code against nvme and a scsi SSD, and I didn't observe performance regression in those. If there are other tests you think I should run, please let me know and I will follow up with results. [1] https://lore.kernel.org/all/aef9de29-e9f5-259a-f8be-12d1b734e72@google.com/ Cc: Hugh Dickins <hughd@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Liu Song <liusong@linux.alibaba.com> Suggested-by:
-
- 10 Nov, 2022 2 commits
-
-
Christoph Hellwig authored
Use set->nr_hw_queues for the current number of tags, and remove the duplicate set->nr_hw_queues update in the caller. Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20221109100811.2413423-2-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
There is no point in trying to share any code with the realloc case when all that is needed by the initial tagset allocation is a simple kcalloc_node. Signed-off-by:
-
- 09 Nov, 2022 14 commits
-
-
Khazhismel Kumykov authored
oom_bfqq is just a fallback bfqq, so shouldn't be used with waker detection. Suggested-by:
Khazhismel Kumykov <khazhy@google.com> Reviewed-by:
-
Khazhismel Kumykov authored
This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL, but woken_list_node still being hashed. This would happen when bfq_init_rq() expects a brand new allocated queue to be returned from bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq without resetting woken_list_node. Since we can always return oom_bfqq when attempting to allocate, we cannot assume waker_bfqq starts as NULL. Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful. Crashes would have a stacktrace like: [160595.656560] bfq_add_bfqq_busy+0x110/0x1ec [160595.661142] bfq_add_request+0x6bc/0x980 [160595.666602] bfq_insert_request+0x8ec/0x1240 [160595.671762] bfq_insert_requests+0x58/0x9c [160595.676420] blk_mq_sched_insert_request+0x11c/0x198 [160595.682107] blk_mq_submit_bio+0x270/0x62c [160595.686759] __submit_bio_noacct_mq+0xec/0x178 [160595.691926] submit_bio+0x120/0x184 [160595.695990] ext4_mpage_readpages+0x77c/0x7c8 [160595.701026] ext4_readpage+0x60/0xb0 [160595.705158] filemap_read_page+0x54/0x114 [160595.711961] filemap_fault+0x228/0x5f4 [160595.716272] do_read_fault+0xe0/0x1f0 [160595.720487] do_fault+0x40/0x1c8 Tested by injecting random failures into bfq_get_queue, crashes go away completely. Fixes: 8ef3fc3a ("block, bfq: make shared queues inherit wakers") Signed-off-by:
-
Christoph Böhmwalder authored
(Sort of) cherry-picked from the out-of-tree drbd9 branch. Original commit message by Joel Colledge: This simplifies drbd_submit_peer_request by removing most of the arguments. It also makes the treatment of the op better aligned with that in struct bio. Determine fault_type dynamically using information which is already available instead of passing it in as a parameter. Note: The opf in receive_rs_deallocated was changed from REQ_OP_WRITE_ZEROES to REQ_OP_DISCARD. This was required in the out-of-tree module, and does not matter in-tree. The opf is ignored anyway in drbd_submit_peer_request, since the discard/zero-out is decided by the EE_TRIM flag. Signed-off-by:Joel Colledge <joel.colledge@linbit.com> Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221109133453.51652-4-christoph.boehmwalder@linbit.comSigned-off-by:
-
Philipp Reisner authored
The discard_granularity describes the minimum unit of a discard. If that is larger than the maximal discard size, we need to disable discards completely. Reviewed-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
-
Christoph Böhmwalder authored
We currently only set q->limits.max_discard_sectors, but that is not enough. Another field, max_hw_discard_sectors, was introduced in commit 0034af03 ("block: make /sys/block/<dev>/queue/discard_max_bytes writeable"). The difference is that max_discard_sectors can be changed from user space via sysfs, while max_hw_discard_sectors is the "hardware" upper limit. So use this helper, which sets both. This is also a fixup for commit 998e9cbc ("drbd: cleanup decide_on_discard_support"): if discards are not supported, that does not necessarily mean we also want to disable write_zeroes. Fixes: 998e9cbc ("drbd: cleanup decide_on_discard_support") Reviewed-by:
-
Logan Gunthorpe authored
Add documentation for the p2pmem/allocate binary file which allows for allocating p2pmem buffers in userspace for passing to drivers that support them. (Currently only O_DIRECT to NVMe devices.) Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Logan Gunthorpe authored
Create a sysfs bin attribute called "allocate" under the existing "p2pmem" group. The only allowable operation on this file is the mmap() call. When mmap() is called on this attribute, the kernel allocates a chunk of memory from the genalloc and inserts the pages into the VMA. The dev_pagemap .page_free callback will indicate when these pages are no longer used and they will be put back into the genalloc. On device unbind, remove the sysfs file before the memremap_pages are cleaned up. This ensures unmap_mapping_range() is called on the files inode and no new mappings can be created. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
-
Logan Gunthorpe authored
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be passed from userspace and enables the NVMe passthru requests to use P2PDMA pages. Signed-off-by:
-
Logan Gunthorpe authored
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be passed from userspace and enables the O_DIRECT path in iomap based filesystems and direct to block devices. Signed-off-by:
-
Logan Gunthorpe authored
Consecutive zone device pages should not be merged into the same sgl or bvec segment with other types of pages or if they belong to different pgmaps. Otherwise getting the pgmap of a given segment is not possible without scanning the entire segment. This helper returns true either if both pages are not zone device pages or both pages are zone device pages with the same pgmap. Factor out the check for page mergability into a pages_are_mergable() helper and add a check with zone_device_pages_are_mergeable(). Signed-off-by:
-
Logan Gunthorpe authored
Consecutive zone device pages should not be merged into the same sgl or bvec segment with other types of pages or if they belong to different pgmaps. Otherwise getting the pgmap of a given segment is not possible without scanning the entire segment. This helper returns true either if both pages are not zone device pages or both pages are zone device pages with the same pgmap. Add a helper to determine if zone device pages are mergeable and use this helper in page_is_mergeable(). Signed-off-by:
-
Logan Gunthorpe authored
Add iov_iter_get_pages_flags() and iov_iter_get_pages_alloc_flags() which take a flags argument that is passed to get_user_pages_fast(). This is so that FOLL_PCI_P2PDMA can be passed when appropriate. Signed-off-by:
-
Logan Gunthorpe authored
GUP Callers that expect PCI P2PDMA pages can now set FOLL_PCI_P2PDMA to allow obtaining P2PDMA pages. If GUP is called without the flag and a P2PDMA page is found, it will return an error in try_grab_page() or try_grab_folio(). The check is safe to do before taking the reference to the page in both cases seeing the page should be protected by either the appropriate ptl or mmap_lock; or the gup fast guarantees preventing TLB flushes. try_grab_folio() has one call site that WARNs on failure and cannot actually deal with the failure of this function (it seems it will get into an infinite loop). Expand the comment there to document a couple more conditions on why it will not fail. FOLL_PCI_P2PDMA cannot be set if FOLL_LONGTERM is set. This is to copy fsdax until pgmap refcounts are fixed (see the link below for more information). Link: https://lkml.kernel.org/r/Yy4Ot5MoOhsgYLTQ@ziepe.caSigned-off-by:
-
Logan Gunthorpe authored
In order to add checks for P2PDMA memory into try_grab_page(), expand the error return from a bool to an int/error code. Update all the callsites handle change in usage. Also remove the WARN_ON_ONCE() call at the callsites seeing there already is a WARN_ON_ONCE() inside the function if it fails. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
- 07 Nov, 2022 1 commit
-
-
Yang Li authored
Remove the description of @required_features in elevator_match() to clear the below warning: block/elevator.c:103: warning: Excess function parameter 'required_features' description in 'elevator_match' Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2734 Fixes: ffb86425 ("block: don't check for required features in elevator_match") Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20221107062255.2685-1-yang.lee@linux.alibaba.comSigned-off-by:
-
- 02 Nov, 2022 3 commits
-
-
Jinlong Chen authored
if-else is more readable than goto here. Signed-off-by:
Jinlong Chen <nickyc975@zju.edu.cn> Link: https://lore.kernel.org/r/d3306fa4e92dc9cc614edc8f1802686096bafef2.1667356813.git.nickyc975@zju.edu.cnSigned-off-by:
-
Jinlong Chen authored
Use goto-style error handling like we do elsewhere in the kernel. Signed-off-by:
-
Chao Leng authored
All controller namespaces share the same tagset, so we can use this interface which does the optimal operation for parallel quiesce based on the tagset type(e.g. blocking tagsets and non-blocking tagsets). nvme connect_q should not be quiesced when quiesce tagset, so set the QUEUE_FLAG_SKIP_TAGSET_QUIESCE to skip it when init connect_q. Currently we use NVME_NS_STOPPED to ensure pairing quiescing and unquiescing. If use blk_mq_[un]quiesce_tagset, NVME_NS_STOPPED will be invalided, so introduce NVME_CTRL_STOPPED to replace NVME_NS_STOPPED. In addition, we never really quiesce a single namespace. It is a better choice to move the flag from ns to ctrl. Signed-off-by:
Chao Leng <lengchao@huawei.com> [hch: rebased on top of prep patches] Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
