- 15 Dec, 2009 31 commits
-
-
Jan Beulich authored
- avoid wasting more precious resources (DMA or DMA32 pools), when being called through vmalloc_32{,_user}() - explicitly allow using high memory here even if the outer allocation request doesn't allow it Signed-off-by:Jan Beulich <jbeulich@novell.com> Acked-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
Objects passed to NODEMASK_ALLOC() are relatively small in size and are backed by slab caches that are not of large order, traditionally never greater than PAGE_ALLOC_COSTLY_ORDER. Thus, using GFP_KERNEL for these allocations on large machines when CONFIG_NODES_SHIFT > 8 will cause the page allocator to loop endlessly in the allocation attempt, each time invoking both direct reclaim or the oom killer. This is of particular interest when using NODEMASK_ALLOC() from a mempolicy context (either directly in mm/mempolicy.c or the mempolicy constrained hugetlb allocations) since the oom killer always kills current when allocations are constrained by mempolicies. So for all present use cases in the kernel, current would end up being oom killed when direct reclaim fails. That would allow the NODEMASK_ALLOC() to succeed but current would have sacrificed itself upon returning. This patch adds gfp flags to NODEMASK_ALLOC() to pass to kmalloc() on CONFIG_NODES_SHIFT > 8; this parameter is a nop on other configurations. All current use cases either directly from hugetlb code or indirectly via NODEMASK_SCRATCH() union __GFP_NORETRY to avoid direct reclaim and the oom killer when the slab allocator needs to allocate additional pages. The side-effect of this change is that all current use cases of either NODEMASK_ALLOC() or NODEMASK_SCRATCH() need appropriate -ENOMEM handling when the allocation fails (never for CONFIG_NODES_SHIFT <= 8). All current use cases were audited and do have appropriate error handling at this time. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
-
Lee Schermerhorn authored
Offload the registration and unregistration of per node hstate sysfs attributes to a worker thread rather than attempt the allocation/attachment or detachment/freeing of the attributes in the context of the memory hotplug handler. I don't know that this is absolutely required, but the registration can sleep in allocations and other mem hot plug handlers do it this way. If it turns out this is NOT required, we can drop this patch. N.B., Only tested build, boot, libhugetlbfs regression. i.e., no memory hotplug testing. Signed-off-by:Lee Schermerhorn <lee.schermerhorn@hp.com> Reviewed-by:
Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
-
Lee Schermerhorn authored
Register per node hstate attributes only for nodes with memory. As suggested by David Rientjes. With Memory Hotplug, memory can be added to a memoryless node and a node with memory can become memoryless. Therefore, add a memory on/off-line notifier callback to [un]register a node's attributes on transition to/from memoryless state. N.B., Only tested build, boot, libhugetlbfs regression. i.e., no memory hotplug testing. Signed-off-by: -
David Rientjes authored
When memory is hot-removed, its node must be cleared in N_HIGH_MEMORY if there are no present pages left. In such a situation, kswapd must also be stopped since it has nothing left to do. Signed-off-by:
-
Lee Schermerhorn authored
Register per node hstate sysfs attributes only for nodes with memory. Global replacement of 'all online nodes" with "all nodes with memory" in mm/hugetlb.c. Suggested by David Rientjes. A subsequent patch will handle adding/removing of per node hstate sysfs attributes when nodes transition to/from memoryless state via memory hotplug. NOTE: this patch has not been tested with memoryless nodes. Signed-off-by:
-
Lee Schermerhorn authored
Update the kernel huge tlb documentation to describe the numa memory policy based huge page management. Additionaly, the patch includes a fair amount of rework to improve consistency, eliminate duplication and set the context for documenting the memory policy interaction. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Reviewed-by:
-
Lee Schermerhorn authored
Add the per huge page size control/query attributes to the per node sysdevs: /sys/devices/system/node/node<ID>/hugepages/hugepages-<size>/ nr_hugepages - r/w free_huge_pages - r/o surplus_huge_pages - r/o The patch attempts to re-use/share as much of the existing global hstate attribute initialization and handling, and the "nodes_allowed" constraint processing as possible. Calling set_max_huge_pages() with no node indicates a change to global hstate parameters. In this case, any non-default task mempolicy will be used to generate the nodes_allowed mask. A valid node id indicates an update to that node's hstate parameters, and the count argument specifies the target count for the specified node. From this info, we compute the target global count for the hstate and construct a nodes_allowed node mask contain only the specified node. Setting the node specific nr_hugepages via the per node attribute effectively ignores any task mempolicy or cpuset constraints. With this patch: (me):ls /sys/devices/system/node/node0/hugepages/hugepages-2048kB ./ ../ free_hugepages nr_hugepages surplus_hugepages Starting from: Node 0 HugePages_Total: 0 Node 0 HugePages_Free: 0 Node 0 HugePages_Surp: 0 Node 1 HugePages_Total: 0 Node 1 HugePages_Free: 0 Node 1 HugePages_Surp: 0 Node 2 HugePages_Total: 0 Node 2 HugePages_Free: 0 Node 2 HugePages_Surp: 0 Node 3 HugePages_Total: 0 Node 3 HugePages_Free: 0 Node 3 HugePages_Surp: 0 vm.nr_hugepages = 0 Allocate 16 persistent huge pages on node 2: (me):echo 16 >/sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages [Note that this is equivalent to: numactl -m 2 hugeadmin --pool-pages-min 2M:+16 ] Yields: Node 0 HugePages_Total: 0 Node 0 HugePages_Free: 0 Node 0 HugePages_Surp: 0 Node 1 HugePages_Total: 0 Node 1 HugePages_Free: 0 Node 1 HugePages_Surp: 0 Node 2 HugePages_Total: 16 Node 2 HugePages_Free: 16 Node 2 HugePages_Surp: 0 Node 3 HugePages_Total: 0 Node 3 HugePages_Free: 0 Node 3 HugePages_Surp: 0 vm.nr_hugepages = 16 Global controls work as expected--reduce pool to 8 persistent huge pages: (me):echo 8 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages Node 0 HugePages_Total: 0 Node 0 HugePages_Free: 0 Node 0 HugePages_Surp: 0 Node 1 HugePages_Total: 0 Node 1 HugePages_Free: 0 Node 1 HugePages_Surp: 0 Node 2 HugePages_Total: 8 Node 2 HugePages_Free: 8 Node 2 HugePages_Surp: 0 Node 3 HugePages_Total: 0 Node 3 HugePages_Free: 0 Node 3 HugePages_Surp: 0 Signed-off-by:
-
Lee Schermerhorn authored
Move definition of NUMA_NO_NODE from ia64 and x86_64 arch specific headers to generic header 'linux/numa.h' for use in generic code. NUMA_NO_NODE replaces bare '-1' where it's used in this series to indicate "no node id specified". Ultimately, it can be used to replace the -1 elsewhere where it is used similarly. Signed-off-by:
-
Lee Schermerhorn authored
This patch derives a "nodes_allowed" node mask from the numa mempolicy of the task modifying the number of persistent huge pages to control the allocation, freeing and adjusting of surplus huge pages when the pool page count is modified via the new sysctl or sysfs attribute "nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows: * For "default" [NULL] task mempolicy, a NULL nodemask_t pointer is produced. This will cause the hugetlb subsystem to use node_online_map as the "nodes_allowed". This preserves the behavior before this patch. * For "preferred" mempolicy, including explicit local allocation, a nodemask with the single preferred node will be produced. "local" policy will NOT track any internode migrations of the task adjusting nr_hugepages. * For "bind" and "interleave" policy, the mempolicy's nodemask will be used. * Other than to inform the construction of the nodes_allowed node mask, the actual mempolicy mode is ignored. That is, all modes behave like interleave over the resulting nodes_allowed mask with no "fallback". See the updated documentation [next patch] for more information about the implications of this patch. Examples: Starting with: Node 0 HugePages_Total: 0 Node 1 HugePages_Total: 0 Node 2 HugePages_Total: 0 Node 3 HugePages_Total: 0 Default behavior [with or without this patch] balances persistent hugepage allocation across nodes [with sufficient contiguous memory]: sysctl vm.nr_hugepages[_mempolicy]=32 yields: Node 0 HugePages_Total: 8 Node 1 HugePages_Total: 8 Node 2 HugePages_Total: 8 Node 3 HugePages_Total: 8 Of course, we only have nr_hugepages_mempolicy with the patch, but with default mempolicy, nr_hugepages_mempolicy behaves the same as nr_hugepages. Applying mempolicy--e.g., with numactl [using '-m' a.k.a. '--membind' because it allows multiple nodes to be specified and it's easy to type]--we can allocate huge pages on individual nodes or sets of nodes. So, starting from the condition above, with 8 huge pages per node, add 8 more to node 2 using: numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40 This yields: Node 0 HugePages_Total: 8 Node 1 HugePages_Total: 8 Node 2 HugePages_Total: 16 Node 3 HugePages_Total: 8 The incremental 8 huge pages were restricted to node 2 by the specified mempolicy. Similarly, we can use mempolicy to free persistent huge pages from specified nodes: numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32 yields: Node 0 HugePages_Total: 4 Node 1 HugePages_Total: 4 Node 2 HugePages_Total: 16 Node 3 HugePages_Total: 8 The 8 huge pages freed were balanced over nodes 0 and 1. [rientjes@google.com: accomodate reworked NODEMASK_ALLOC] Signed-off-by:
-
Lee Schermerhorn authored
Factor init_nodemask_of_node() out of the nodemask_of_node() macro. This will be used to populate the huge pages "nodes_allowed" nodemask for a single node when basing nodes_allowed on a preferred/local mempolicy or when a persistent huge page pool page count is modified via a per node sysfs attribute. Signed-off-by:
-
Lee Schermerhorn authored
In preparation for constraining huge page allocation and freeing by the controlling task's numa mempolicy, add a "nodes_allowed" nodemask pointer to the allocate, free and surplus adjustment functions. For now, pass NULL to indicate default behavior--i.e., use node_online_map. A subsqeuent patch will derive a non-default mask from the controlling task's numa mempolicy. Note that this method of updating the global hstate nr_hugepages under the constraint of a nodemask simplifies keeping the global state consistent--especially the number of persistent and surplus pages relative to reservations and overcommit limits. There are undoubtedly other ways to do this, but this works for both interfaces: mempolicy and per node attributes. [rientjes@google.com: fix HIGHMEM compile error] Signed-off-by:
-
Lee Schermerhorn authored
Modify the hstate_next_node* functions to allow them to be called to obtain the "start_nid". Then, whereas prior to this patch we unconditionally called hstate_next_node_to_{alloc|free}(), whether or not we successfully allocated/freed a huge page on the node, now we only call these functions on failure to alloc/free to advance to next allowed node. Factor out the next_node_allowed() function to handle wrap at end of node_online_map. In this version, the allowed nodes include all of the online nodes. Signed-off-by: -
David Rientjes authored
This is a series of patches to provide control over the location of the allocation and freeing of persistent huge pages on a NUMA platform. Please consider for merging into mmotm. This series uses two mechanisms to constrain the nodes from which persistent huge pages are allocated: 1) the task NUMA mempolicy of the task modifying a new sysctl "nr_hugepages_mempolicy", based on a suggestion by Mel Gorman; and 2) a subset of the hugepages hstate sysfs attributes have been added [in V4] to each node system device under: /sys/devices/node/node[0-9]*/hugepages The per node attibutes allow direct assignment of a huge page count on a specific node, regardless of the task's mempolicy or cpuset constraints. This patch: NODEMASK_ALLOC(x, m) assumes x is a type of struct, which is unnecessary. It's perfectly reasonable to use this macro to allocate a nodemask_t, which is anonymous, either dynamically or on the stack depending on NODES_SHIFT. Signed-off-by:
-
KOSAKI Motohiro authored
Christoph pointed out inc_zone_page_state(NR_ISOLATED) should be placed in right after isolate_page(). This patch does it. Reviewed-by:
Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Wu Fengguang authored
Also rename "len" to "sz". No behavior change. Signed-off-by:
-
Wu Fengguang authored
Also convert more size_inside_page() users. Signed-off-by:
-
Wu Fengguang authored
No behaviour change. [akpm@linux-foundation.org: cleanuplets] [akpm@linux-foundation.org: remove unused `ret'] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by:
-
Wu Fengguang authored
Introduce size_inside_page() to replace duplicate /dev/mem code. Also apply it to /dev/kmem, whose alignment logic was buggy. Signed-off-by:
-
Wu Fengguang authored
The len test in write_kmem() is always true, so can be reduced. Signed-off-by:
-
KOSAKI Motohiro authored
On ia64, the following test program exit abnormally, because glibc thread library called abort(). ======================================================== (gdb) bt #0 0xa000000000010620 in __kernel_syscall_via_break () #1 0x20000000003208e0 in raise () from /lib/libc.so.6.1 #2 0x2000000000324090 in abort () from /lib/libc.so.6.1 #3 0x200000000027c3e0 in __deallocate_stack () from /lib/libpthread.so.0 #4 0x200000000027f7c0 in start_thread () from /lib/libpthread.so.0 #5 0x200000000047ef60 in __clone2 () from /lib/libc.so.6.1 ======================================================== The fact is, glibc call munmap() when thread exitng time for freeing stack, and it assume munlock() never fail. However, munmap() often make vma splitting and it with many mapcount make -ENOMEM. Oh well, that's crazy, because stack unmapping never increase mapcount. The maxcount exceeding is only temporary. internal temporary exceeding shouldn't make ENOMEM. This patch does it. test_max_mapcount.c ================================================================== #include<stdio.h> #include<stdlib.h> #include<string.h> #include<pthread.h> #include<errno.h> #include<unistd.h> #define THREAD_NUM 30000 #define MAL_SIZE (8*1024*1024) void *wait_thread(void *args) { void *addr; addr = malloc(MAL_SIZE); sleep(10); return NULL; } void *wait_thread2(void *args) { sleep(60); return NULL; } int main(int argc, char *argv[]) { int i; pthread_t thread[THREAD_NUM], th; int ret, count = 0; pthread_attr_t attr; ret = pthread_attr_init(&attr); if(ret) { perror("pthread_attr_init"); } ret = pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED); if(ret) { perror("pthread_attr_setdetachstate"); } for (i = 0; i < THREAD_NUM; i++) { ret = pthread_create(&th, &attr, wait_thread, NULL); if(ret) { fprintf(stderr, "[%d] ", count); perror("pthread_create"); } else { printf("[%d] create OK.\n", count); } count++; ret = pthread_create(&thread[i], &attr, wait_thread2, NULL); if(ret) { fprintf(stderr, "[%d] ", count); perror("pthread_create"); } else { printf("[%d] create OK.\n", count); } count++; } sleep(3600); return 0; } ================================================================== [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: -
Alex Chiang authored
On a system with large amount of memory (256GB), invoking page-types can take quite a long time, which is unreasonable considering the user only wants a description of the flags: # time ./page-types -d 0x10 0x0000000000000010 ____D_____________________________ dirty real 0m34.285s user 0m1.966s sys 0m32.313s This is because we still walk the entire address range. Exiting early seems like a reasonble solution: # time ./page-types -d 0x10 0x0000000000000010 ____D_____________________________ dirty real 0m0.007s user 0m0.001s sys 0m0.005s Signed-off-by:
Alex Chiang <achiang@hp.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Haicheng Li <haicheng.li@intel.com> Acked-by:
-
Alex Chiang authored
Align the output when page-type -h is invoked. Signed-off-by:
-
Alex Chiang authored
Teach page-types to describe page flags directly from the command line. Why is this useful? For instance, if you're using memory hotplug and see this in /var/log/messages: kernel: removing from LRU failed 3836dd0/1/1e00000000000010 It would be nice to decode those page flags without staring at the source. Example usage and output: # Documentation/vm/page-types -d 0x10 0x0000000000000010 ____D_____________________________ dirty # Documentation/vm/page-types -d anon 0x0000000000001000 ____________a_____________________ anonymous # Documentation/vm/page-types -d anon,0x10 0x0000000000001010 ____D_______a_____________________ dirty,anonymous [achiang@hp.com: documentation] Signed-off-by:
-
Roel Kluin authored
If not signed, testing of the read() return value in this function will not work. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Tommi Rantala authored
Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
David Rientjes authored
The oom killer header, including information such as the allocation order and gfp mask, current's cpuset and memory controller, call trace, and VM state information is currently only shown when the oom killer has selected a task to kill. This information is omitted, however, when the oom killer panics either because of panic_on_oom sysctl settings or when no killable task was found. It is still relevant to know crucial pieces of information such as the allocation order and VM state when diagnosing such issues, especially at boot. This patch displays the oom killer header whenever it panics so that bug reports can include pertinent information to debug the issue, if possible. Signed-off-by:
-
Michal Marek authored
Sam was fine with handing over kbuild maintainership to me. The git trees are already in linux-next, a merge request will follow shortly. Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Amerigo Wang authored
A specially-crafted Hierarchical File System (HFS) filesystem could cause a buffer overflow to occur in a process's kernel stack during a memcpy() call within the hfs_bnode_read() function (at fs/hfs/bnode.c:24). The attacker can provide the source buffer and length, and the destination buffer is a local variable of a fixed length. This local variable (passed as "&entry" from fs/hfs/dir.c:112 and allocated on line 60) is stored in the stack frame of hfs_bnode_read()'s caller, which is hfs_readdir(). Because the hfs_readdir() function executes upon any attempt to read a directory on the filesystem, it gets called whenever a user attempts to inspect any filesystem contents. [amwang@redhat.com: modify this patch and fix coding style problems] Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: Eugene Teo <eteo@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Anderson <anderson@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Alexey Dobriyan authored
commit d8e180dc "bsdacct: switch credentials for writing to the accounting file" introduced credential switching during final acct data collecting. However, uid/gid pair continued to be collected from current which became credentials of who created acct file, not who exits. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14676Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reported-by:
Juho K. Juopperi <jkj@kapsi.fi> Acked-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Michal Schmidt <mschmidt@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <stable@kernel.org> Signed-off-by:
-
- 14 Dec, 2009 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-core: i2c bus should support PM entries in struct dev_pm_ops i2c: Get rid of I2C_CLIENT_MODULE_PARM i2c: Drop I2C_CLIENT_INSMOD_2 to 8 i2c: Drop I2C_CLIENT_INSMOD_1 i2c: Get rid of struct i2c_client_address_data i2c: Drop the kind parameter from detect callbacks
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Avoid IO in udf_clear_inode udf: Try harder when looking for VAT inode udf: Fix compilation with UDFFS_DEBUG enabled
-
Jan Kara authored
It is not very good to do IO in udf_clear_inode. First, VFS does not really expect inode to become dirty there and thus we have to write it ourselves, second, memory reclaim gets blocked waiting for IO when it does not really expect it, third, the IO pattern (e.g. on umount) resulting from writes in udf_clear_inode is bad and it slows down writing a lot. The reason why UDF needed to do IO in udf_clear_inode is that UDF standard mandates extent length to exactly match inode size. But when we allocate extents to a file or directory, we don't really know what exactly the final file size will be and thus temporarily set it to block boundary and later truncate it to exact length in udf_clear_inode. Now, this is changed to truncate to final file size in udf_release_file for regular files. For directories and symlinks, we do the truncation at the moment when learn what the final file size will be. Signed-off-by:Jan Kara <jack@suse.cz>
-
Jan Kara authored
Some disks do not contain VAT inode in the last recorded block as required by the standard but a few blocks earlier (or the number of recorded blocks is wrong). So look for the VAT inode a bit before the end of the media. Signed-off-by: -
Jan Kara authored
Signed-off-by: -
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: Clean up thermal init by introducing intel_thermal_supported() x86, mce: Thermal monitoring depends on APIC being enabled x86: Gart: fix breakage due to IOMMU initialization cleanup x86: Move swiotlb initialization before dma32_free_bootmem x86: Fix build warning in arch/x86/mm/mmio-mod.c x86: Remove usedac in feature-removal-schedule.txt x86: Fix duplicated UV BAU interrupt vector nvram: Fix write beyond end condition; prove to gcc copy is safe mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe x86: Limit the number of processor bootup messages x86: Remove enabling x2apic message for every CPU doc: Add documentation for bootloader_{type,version} x86, msr: Add support for non-contiguous cpumasks x86: Use find_e820() instead of hard coded trampoline address x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: CodingStyle fixes pcmcia: remove unused IRQ_FIRST_SHARED
-
sonic zhang authored
Struct dev_pm_ops is not configured in current i2c bus type. i2c drivers only depends on suspend/resume entries in struct dev_pm_ops are not informed of PM suspend and resume events by i2c framework. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
There is no user left of I2C_CLIENT_MODULE_PARM, so we can finally get rid of this ugly macro. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de>
-
