- 22 Sep, 2019 6 commits
-
-
Jiri Kosina authored
- fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu Signed-off-by:Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
- proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian Henneke Signed-off-by: -
Jiri Kosina authored
- fixes for formatting / ratelimiting kernel log by HID core, from Joshua Clayton Signed-off-by: -
Jiri Kosina authored
- cleanup of ->drvdata handling between HID core and drivers, from Benjamin Tissoires Signed-off-by: -
Jiri Kosina authored
- stuck 'fn' key fix for hid-apple from Joao Moreno Signed-off-by: -
Jiri Kosina authored
- syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and Sony drivers from Alan Stern and Roderick Colenbrander - error handling fix for Logitech unifying receivers from Hans de Goede Signed-off-by:
-
- 18 Sep, 2019 3 commits
-
-
Joshua Clayton authored
Only warn once of oversize hid report value field On HP spectre x360 convertible the message: hid-sensor-hub 001F:8087:0AC2.0002: hid_field_extract() called with n (192) > 32! (kworker/1:2) is continually printed many times per second, crowding out all else. Protect dmesg by printing the warning only one time. The size of the hid report field data structure should probably be increased. The data structure is treated as a u32 in Linux, but an unlimited number of bits in the USB hid spec, so there is some rearchitecture needed now that devices are sending more than 32 bits. Signed-off-by:
Joshua Clayton <stillcompiling@gmail.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Joshua Clayton authored
hid_warn_once() is needed. Add the others as part of the block. Signed-off-by:
-
Joshua Clayton authored
Reformat hid_printk macros to use standard __VA_ARGS__ syntax. Per Joe Perches hid_printk(), hid_emerg(), hid_crit(), and hid_alert() are unlikely ever to be used. Remove them. Signed-off-by:
-
- 05 Sep, 2019 2 commits
-
-
Alan Stern authored
The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline] RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline] RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline] RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836 Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc 48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds. This patch adds the missing check and aborts the probe operation if necessary. Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
-
Roderick Colenbrander authored
The sony driver is not properly cleaning up from potential failures in sony_input_configured. Currently it calls hid_hw_stop, while hid_connect is still running. This is not a good idea, instead hid_hw_stop should be moved to sony_probe. Similar changes were recently made to Logitech drivers, which were also doing improper cleanup. Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by:
-
- 04 Sep, 2019 2 commits
-
-
HungNien Chen authored
This 'SET_PWR_WAKEUP_DEV' quirk only works for weida's devices with pid 0xC300 & 0xC301. Some weida's devices with other pids also need this quirk now. Use 'HID_ANY_ID' instead of 0xC300 to make all of weida's devices can be fixed on the power on issue. This modification should be safe since devices without power on issue will send the power on command only once. Signed-off-by:
HungNien Chen <hn.chen@weidahitech.com> Signed-off-by:
-
Joao Moreno authored
This fixes an issue in which key down events for function keys would be repeatedly emitted even after the user has raised the physical key. For example, the driver fails to emit the F5 key up event when going through the following steps: - fnmode=1: hold FN, hold F5, release FN, release F5 - fnmode=2: hold F5, hold FN, release F5, release FN The repeated F5 key down events can be easily verified using xev. Signed-off-by:
Joao Moreno <mail@joaomoreno.com> Co-developed-by:
-
- 03 Sep, 2019 1 commit
-
-
Sebastian Parschauer authored
The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Ville Viinikka (viinikv) reported and tested the quirk. Link: https://github.com/sriemer/fix-linux-mouse issue 15 Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org # v4.16+ Signed-off-by:
-
- 26 Aug, 2019 1 commit
-
-
Hans de Goede authored
Before this commit dj_probe would exit with an error if the initial logi_dj_recv_query_paired_devices fails. The initial call may fail when the receiver is connected through a kvm and the focus is away. When the call fails this causes 2 problems: 1) dj_probe calls logi_dj_recv_query_paired_devices after calling hid_device_io_start() so a HID report may have been received in between and our delayedwork_callback may be running. It seems that the initial logi_dj_recv_query_paired_devices failure happening with some KVMs triggers this exact scenario, causing the work-queue to run on free-ed memory, leading to: BUG: unable to handle page fault for address: 0000000000001e88 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 257 Comm: kworker/3:3 Tainted: G OE 5.3.0-rc5+ #100 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B150M Pro4S/D3, BIOS P7.10 12/06/2016 Workqueue: events 0xffffffffc02ba200 RIP: 0010:0xffffffffc02ba1bd Code: e8 e8 13 00 d8 48 89 c5 48 85 c0 74 4c 48 8b 7b 10 48 89 ea b9 07 00 00 00 41 b9 09 00 00 00 41 b8 01 00 00 00 be 10 00 00 00 <48> 8b 87 88 1e 00 00 48 8b 40 40 e8 b3 6b b4 d8 48 89 ef 41 89 c4 RSP: 0018:ffffb760c046bdb8 EFLAGS: 00010286 RAX: ffff935038ea4550 RBX: ffff935046778000 RCX: 0000000000000007 RDX: ffff935038ea4550 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff935038ea4550 R08: 0000000000000001 R09: 0000000000000009 R10: 000000000000e011 R11: 0000000000000001 R12: ffff9350467780e8 R13: ffff935046778000 R14: 0000000000000000 R15: ffff935046778070 FS: 0000000000000000(0000) GS:ffff935054e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001e88 CR3: 000000075a612002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: 0xffffffffc02ba2f7 ? process_one_work+0x1b1/0x560 process_one_work+0x234/0x560 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ? process_one_work+0x560/0x560 ? kthread_park+0x80/0x80 ret_from_fork+0x3a/0x50 Modules linked in: vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep vfat fat btusb btrtl btbcm btintel bluetooth intel_rapl_msr ecdh_generic rfkill ecc snd_usb_audio snd_usbmidi_lib intel_rapl_common snd_rawmidi mc x86_pkg_temp_thermal intel_powerclamp coretemp iTCO_wdt iTCO_vendor_support mei_wdt mei_hdcp ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_generic crc32_pclmul snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio ghash_clmulni_intel intel_cstate snd_hda_intel snd_hda_codec intel_uncore snd_hda_core snd_hwdep intel_rapl_perf snd_seq snd_seq_device snd_pcm snd_timer intel_wmi_thunderbolt snd e1000e soundcore mxm_wmi i2c_i801 bfq mei_me mei intel_pch_thermal parport_pc parport acpi_pad binfmt_misc hid_lg_g15(E) hid_logitech_dj(E) i915 crc32c_intel i2c_algo_bit drm_kms_helper nvme nvme_core drm wmi video uas usb_storage i2c_dev CR2: 0000000000001e88 ---[ end trace 1d3f8afdcfcbd842 ]--- 2) Even if we were to fix 1. by making sure the work is stopped before failing probe, failing probe is the wrong thing to do, we have logi_dj_recv_queue_unknown_work to deal with the initial logi_dj_recv_query_paired_devices failure. Rather then error-ing out of the probe, causing the receiver to not work at all we should rely on this, so that the attached devices will get properly enumerated once the KVM focus is switched back. Cc: stable@vger.kernel.org Fixes: 74808f91 ("HID: logitech-dj: add support for non unifying receivers") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 22 Aug, 2019 3 commits
-
-
Benjamin Tissoires authored
This is a common pattern in the HID drivers to reset the drvdata. Some do it properly, some do it only in case of failure. But, this is actually already handled by driver core, so there is no need to do it manually. [for hid-sensor-hub.c] Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [For hid-picolcd_core.c] Acked-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
-
Alan Stern authored
The syzbot fuzzer found a general protection fault in the HID subsystem: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069 Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00 RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000 RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25 R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004 R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048 FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline] usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707 usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234 hid_hw_power include/linux/hid.h:1038 [inline] hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282 chrdev_open+0x219/0x5c0 fs/char_dev.c:413 do_dentry_open+0x497/0x1040 fs/open.c:778 do_last fs/namei.c:3416 [inline] path_openat+0x1430/0x3ff0 fs/namei.c:3533 do_filp_open+0x1a1/0x280 fs/namei.c:3563 do_sys_open+0x3c0/0x580 fs/open.c:1070 do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met. Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com Signed-off-by:
-
Alan Stern authored
The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first: BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525 Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833 CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 strlen+0x79/0x90 lib/string.c:525 strlen include/linux/string.h:281 [inline] hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696 ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4 R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test. Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com Signed-off-by:
-
- 20 Aug, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - a few regression fixes for wacom driver (including fix for my earlier mismerge) from Aaron Armstrong Skomra and Jason Gerecke - revert of a few Logitech device ID additions which turn out to not work perfectly with the hidpp driver at the moment; proper support is now scheduled for 5.4. Fixes from Benjamin Tissoires - scheduling-in-atomic fix for cp2112 driver, from Benjamin Tissoires - new device ID to intel-ish, from Even Xu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: correct misreported EKR ring values HID: cp2112: prevent sleeping function called from invalid context HID: intel-ish-hid: ipc: add EHL device id HID: wacom: Correct distance scale for 2nd-gen Intuos devices HID: logitech-hidpp: remove support for the G700 over USB Revert "HID: logitech-hidpp: add USB PID for a few more supported mice" HID: wacom: add back changes dropped in merge commit
-
Aaron Armstrong Skomra authored
The EKR ring claims a range of 0 to 71 but actually reports values 1 to 72. The ring is used in relative mode so this change should not affect users. Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Fixes: 72b236d6 ("HID: wacom: Add support for Express Key Remote.") Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
-
- 19 Aug, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A couple fixes to the core framework logic that finds clk parents, a handful of samsung clk driver fixes for audio and display clks, and a small fix for the Stratix10 SoC driver that was checking the wrong register for validity" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Fix potential NULL dereference in clk_fetch_parent_index() clk: Fix falling back to legacy parent string matching clk: socfpga: stratix10: fix rate caclulationg for cnt_clks clk: samsung: exynos542x: Move MSCL subsystem clocks to its sub-CMU clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU clk: samsung: Change signature of exynos5_subcmus_init() function
-
Linus Torvalds authored
Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kernel thread signal handling fix from Eric Biederman: "I overlooked the fact that kernel threads are created with all signals set to SIG_IGN, and accidentally caused a regression in cifs and drbd when replacing force_sig with send_sig. This is my fix for that regression. I add a new function allow_kernel_signal which allows kernel threads to receive signals sent from the kernel, but continues to ignore all signals sent from userspace. This ensures the user space interface for cifs and drbd remain the same. These kernel threads depend on blocking networking calls which block until something is received or a signal is pending. Making receiving of signals somewhat necessary for these kernel threads. Perhaps someday we can cleanup those interfaces and remove allow_kernel_signal. If not allow_kernel_signal is pretty trivial and clearly documents what is going on so I don't think we will mind carrying it" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Allow cifs and drbd to receive their terminating signals
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov. 2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan. 3) Fix severe performance regression due to lack of SKB coalescing of fragments during local delivery, from Guillaume Nault. 4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk. 5) Fix batched events in skbedit packet action, from Roman Mashak. 6) Propagate VLAN TX offload to hw_enc_features in bond and team drivers, from Yue Haibing. 7) RXRPC local endpoint refcounting fix and read after free in rxrpc_queue_local(), from David Howells. 8) Fix endian bug in ibmveth multicast list handling, from Thomas Falcon. 9) Oops, make nlmsg_parse() wrap around the correct function, __nlmsg_parse not __nla_parse(). Fix from David Ahern. 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin. 11) Fix memory leak in cxgb4, from Wenwen Wang. 12) Yet another race in AF_PACKET, from Eric Dumazet. 13) Fix false detection of retransmit failures in tipc, from Tuong Lien. 14) Use after free in ravb_tstamp_skb, from Tho Vu. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) ravb: Fix use-after-free ravb_tstamp_skb netfilter: nf_tables: map basechain priority to hardware priority net: sched: use major priority number as hardware priority wimax/i2400m: fix a memory leak bug net: cavium: fix driver name ibmvnic: Unmap DMA address of TX descriptor buffers after use bnxt_en: Fix to include flow direction in L2 key bnxt_en: Use correct src_fid to determine direction of the flow bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails bnxt_en: Improve RX doorbell sequence. bnxt_en: Fix VNIC clearing logic for 57500 chips. net: kalmia: fix memory leaks cx82310_eth: fix a memory leak bug bnx2x: Fix VF's VLAN reconfiguration in reload. Bluetooth: Add debug setting for changing minimum encryption key size tipc: fix false detection of retransmit failures lan78xx: Fix memory leaks MAINTAINERS: r8169: Update path to the driver MAINTAINERS: PHY LIBRARY: Update files in the record ... -
David Howells authored
The maximum key description size is 4095. Commit f771fde8 ("keys: Simplify key description management") inadvertantly reduced that to 255 and made sizes between 256 and 4095 work weirdly, and any size whereby size & 255 == 0 would cause an assertion in __key_link_begin() at the following line: BUG_ON(index_key->desc_len == 0); This can be fixed by simply increasing the size of desc_len in struct keyring_index_key to a u16. Note the argument length test in keyutils only checked empty descriptions and descriptions with a size around the limit (ie. 4095) and not for all the values in between, so it missed this. This has been addressed and https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/commit/?id=066bf56807c26cd3045a25f355b34c1d8a20a5aa now exhaustively tests all possible lengths of type, description and payload and then some. The assertion failure looks something like: kernel BUG at security/keys/keyring.c:1245! ... RIP: 0010:__key_link_begin+0x88/0xa0 ... Call Trace: key_create_or_update+0x211/0x4b0 __x64_sys_add_key+0x101/0x200 do_syscall_64+0x5b/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It can be triggered by: keyctl add user "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" a @s Fixes: f771fde8 ("keys: Simplify key description management") Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Benjamin Tissoires authored
When calling request_threaded_irq() with a CP2112, the function cp2112_gpio_irq_startup() is called in a IRQ context. Therefore we can not sleep, and we can not call cp2112_gpio_direction_input() there. Move the call to cp2112_gpio_direction_input() earlier to have a working driver. Signed-off-by:
-
Even Xu authored
EHL is a new platform using ishtp solution, add its device id to support list. Signed-off-by:
Even Xu <even.xu@intel.com> Acked-by:
-
Jason Gerecke authored
Distance values reported by 2nd-gen Intuos tablets are on an inverted scale (0 == far, 63 == near). We need to change them over to a normal scale before reporting to userspace or else userspace drivers and applications can get confused. Ref: https://github.com/linuxwacom/input-wacom/issues/98 Fixes: eda01dab ("HID: wacom: Add four new Intuos devices") Signed-off-by:
-
Zhang Lixu authored
The NO_D3 flag would be set if the ISH enter D0i3 in ish_suspend(), The resume paths can be distinguished by checking the NO_D3 flag. It's more reasonable than checking the FW status. Signed-off-by:
Zhang Lixu <lixu.zhang@intel.com> Acked-by:
-
Zhang Lixu authored
For suspend-to-idle, send suspend message and set N0_D3 flag to put the ISH into D0i3 state. For suspend-to-mem, disable the DMA bit before ISH entering D3, and NO_D3 flag is cleared by default, then the ISH would enter D3. Signed-off-by:
-
Zhang Lixu authored
Currently, the NO_D3 flag is set in ish_probe(), and cleared in ish_remove(). So even if the system goes into S3, ISH is still in D0i3 state. It makes more sense that put ISH into D3 as system goes into S3 and put ISH into D0i3 as system goes into suspend-to-idle. I remove the NO_D3 setting in ish_probe(), so that ISH can enter D3 state when system enters S3. Only set N0_D3 flag when system enters the suspend-to-idle or platform specified, and clear it when system resume. When the ISH enters D3, the FW will check the DMA bit status. If the DMA bit is set, the FW will reset automatically. So the DMA bit need be clear before putting ISH into D3 state. Signed-off-by:
-
Eric W. Biederman authored
My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals. Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong. So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal. Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected. This change was partly inspired by similar cifs and drbd patches that added allow_signal. Reported-by:
ronnie sahlberg <ronniesahlberg@gmail.com> Reported-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com>
-
- 18 Aug, 2019 9 commits
-
-
Linus Torvalds authored
-
Tho Vu authored
When a Tx timestamp is requested, a pointer to the skb is stored in the ravb_tstamp_skb struct. This was done without an skb_get. There exists the possibility that the skb could be freed by ravb_tx_free (when ravb_tx_free is called from ravb_start_xmit) before the timestamp was processed, leading to a use-after-free bug. Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate frees/consumes when a ravb_tstamp_skb struct is freed. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Tho Vu <tho.vu.wh@rvc.renesas.com> Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Pablo Neira Ayuso says: ==================== flow_offload hardware priority fixes This patchset contains two updates for the flow_offload users: 1) Pass the major tc priority to drivers so they do not have to lshift it. This is a preparation patch for the fix coming in patch #2. 2) Set the hardware priority from the netfilter basechain priority, some drivers break when using the existing hardware priority number that is set to zero. v5: fix patch 2/2 to address a clang warning and to simplify the priority mapping. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
This patch adds initial support for offloading basechains using the priority range from 1 to 65535. This is restricting the netfilter priority range to 16-bit integer since this is what most drivers assume so far from tc. It should be possible to extend this range of supported priorities later on once drivers are updated to support for 32-bit integer priorities. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
tc transparently maps the software priority number to hardware. Update it to pass the major priority which is what most drivers expect. Update drivers too so they do not need to lshift the priority field of the flow_cls_common_offload object. The stmmac driver is an exception, since this code assumes the tc software priority is fine, therefore, lshift it just to be conservative. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Wenwen Wang authored
In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup() to hold the original command line options. Then, the options are parsed. However, if an error occurs during the parsing process, 'options_orig' is not deallocated, leading to a memory leak bug. To fix this issue, free 'options_orig' before returning the error. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Stephen Hemminger authored
The driver name gets exposed in sysfs under /sys/bus/pci/drivers so it should look like other devices. Change it to be common format (instead of "Cavium PTP"). This is a trivial fix that was observed by accident because Debian kernels were building this driver into kernel (bug). Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Thomas Falcon authored
There's no need to wait until a completion is received to unmap TX descriptor buffers that have been passed to the hypervisor. Instead unmap it when the hypervisor call has completed. This patch avoids the possibility that a buffer will not be unmapped because a TX completion is lost or mishandled. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by:
Devesh K. Singh <devesh_singh@in.ibm.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. 2 Bug fixes related to 57500 shutdown sequence and doorbell sequence, 2 TC Flower bug fixes related to the setting of the flow direction, 1 NVRAM update bug fix, and a minor fix to suppress an unnecessary error message. Please queue for -stable as well. Thanks. ==================== Signed-off-by:
-
