- 15 Feb, 2013 14 commits
-
-
Michael Neuling authored
Defines for MSR bits and transactional memory related SPRs TFIAR, TEXASR and TEXASRU. Signed-off-by:
Matt Evans <matt@ozlabs.org> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
This adds new macros for saving and restoring checkpointed architected state from and to the thread_struct. It also adds some debugging macros for when your brain explodes trying to debug your transactional memory enabled kernel. Signed-off-by:
-
Michael Neuling authored
Set of new archtected state for saving away on context switch. Signed-off-by:
-
Michael Neuling authored
Here we define the new instructions we need for transactional memory in the kernel. This is so we can support compiling with binutils that don't support the new transactional memory instructions. Transactional memory results in two sets of architected state (GPRs/VSRs etc). treclaim allows us to read the checkpointed state (from the tbegin) so that we can store it away on a context switch. It does this by overwriting the exiting architected state, so you have to save that away before you treclaim. treclaim will also abort a transaction, so you can give a register value which contains an abort reason. trecheckpoint allows us to inject into the checkpointed state as if it were at the tbegin. It does this by copying the current architected state into the checkpointed state. Signed-off-by:
-
Michael Neuling authored
Signed-off-by:
-
Michael Ellerman authored
In commit 466921c5 we added a hack to set the paca data_offset to zero so that per-cpu accesses would work on the boot cpu prior to per-cpu areas being setup. This fixed a problem with lockdep touching per-cpu areas very early in boot. However if we combine CONFIG_LOCK_STAT=y with any of the PPC_EARLY_DEBUG options, we can hit the same problem in udbg_early_init(). To avoid that we need to set the data_offset of the boot_paca also. So factor out the fixup logic and call it for both the boot_paca, and "the paca of the boot cpu". Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Tested-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Geoff Levand authored
The powerpc boot_paca symbol is now only used within the early_setup() routine, so move it from its global definition into early_setup(). Signed-off-by:
-
Geoff Levand authored
Signed-off-by:
-
Geoff Levand authored
Signed-off-by:
-
Geoff Levand authored
To allow more control of the verbosity of ps3_result() add a check for the preprocessor macro PS3_VERBOSE_RESULT that builds a verbose verion of the ps3_result() routine. Signed-off-by:
-
Paul Mackerras authored
Commit a413f474 ("powerpc: Disable relocation on exceptions whenever PR KVM is active") added calls to pSeries_disable_reloc_on_exc() and pSeries_enable_reloc_on_exc() to book3s_pr.c, and added declarations of those functions to <asm/hvcall.h>, but didn't add an include of <asm/hvcall.h> to book3s_pr.c. 64-bit kernels seem to get hvcall.h included via some other path, but 32-bit kernels fail to compile with: arch/powerpc/kvm/book3s_pr.c: In function ‘kvmppc_core_init_vm’: arch/powerpc/kvm/book3s_pr.c:1300:4: error: implicit declaration of function ‘pSeries_disable_reloc_on_exc’ [-Werror=implicit-function-declaration] arch/powerpc/kvm/book3s_pr.c: In function ‘kvmppc_core_destroy_vm’: arch/powerpc/kvm/book3s_pr.c:1316:4: error: implicit declaration of function ‘pSeries_enable_reloc_on_exc’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[2]: *** [arch/powerpc/kvm/book3s_pr.o] Error 1 make[1]: *** [arch/powerpc/kvm] Error 2 make: *** [sub-make] Error 2 This fixes it by adding an include of hvcall.h. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
The CFAR (Come-From Address Register) is a useful debugging aid that exists on POWER7 processors. Currently HV KVM doesn't save or restore the CFAR register for guest vcpus, making the CFAR of limited use in guests. This adds the necessary code to capture the CFAR value saved in the early exception entry code (it has to be saved before any branch is executed), save it in the vcpu.arch struct, and restore it on entry to the guest. Signed-off-by:
-
Paul Mackerras authored
Some of the interrupt vectors on 64-bit POWER server processors are only 32 bytes long, which is not enough for the full first-level interrupt handler. For these we currently just have a branch to an out-of-line handler. However, this means that we corrupt the CFAR (come-from address register) on POWER7 and later processors. To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces: EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We then put EXCEPTION_PROLOG_0 in the short interrupt vectors before we branch to the out-of-line handler, which contains the rest of the first-level interrupt handler. To facilitate this, we define new _OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc. In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more than 6 instructions, it was necessary to move the stores that move the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and to get rid of one of the two HMT_MEDIUM instructions. Previously there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was nop'd out on processors with the PPR (POWER7 and later), and then another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside __EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR. Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although this leaves it in for the interrupt vectors where there is room for it. Previously we had a handler for hypervisor maintenance interrupts at 0xe50, which doesn't leave enough room for the vector for hypervisor emulation assist interrupts at 0xe40, since we need 8 instructions. The 0xe50 vector was only used on POWER6, as the HMI vector was moved to 0xe60 on POWER7. Since we don't support running in hypervisor mode on POWER6, we just remove the handler at 0xe50. This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0 instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD from the relocation-on vectors (since any CPU that supports relocation-on interrupts also has the PPR). Signed-off-by:
-
Paul Mackerras authored
The Cell processor doesn't support relocation-on interrupts, so we don't need relocation-on versions of the interrupt vectors that are purely Cell-specific. This removes them. Signed-off-by:
-
- 08 Feb, 2013 4 commits
-
-
Ian Munsie authored
This patch adds support for enabling and context switching the Target Address Register in Power8. The TAR is a new special purpose register that can be used for computed branches with the bctar[l] (branch conditional to TAR) instruction in the same manner as the count and link registers. Signed-off-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Nishanth Aravamudan authored
pseries/iommu: remove DDW on kexec We currently insert a property in the device-tree when we successfully configure DDW for a given slot. This was meant to be an optimization to speed up kexec/kdump, so that we don't need to make the RTAS calls again to re-configured DDW in the new kernel. However, we end up tripping a plpar_tce_stuff failure on kexec/kdump because we unconditionally parse the ibm,dma-window property for the node at bus/dev setup time. This property contains the 32-bit DMA window LIOBN, which is distinct from the DDW window's. We pass that LIOBN (via iommu_table_init -> iommu_table_clear -> tce_free -> tce_freemulti_pSeriesLP) to plpar_tce_stuff, which fails because that 32-bit window is no longer present after 25ebc45b ("powerpc/pseries/iommu: remove default window before attempting DDW manipulation"). I believe the simplest, easiest-to-maintain fix is to just change our initcall to, rather than detecting and updating the new kernel's DDW knowledge, just remove all DDW configurations. When the drivers re-initialize, we will set everything back up as it was before. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Nishanth Aravamudan authored
The parameter is unused, and complicates a following fix. Just remove it. Signed-off-by:
-
Daniel Borkmann authored
It seems, we're fine with just annotating the two functions. Thus, this fixes the following build warnings on ppc64: WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1664): The function .ics_rtas_init() references the function __init .xics_register_ics(). This is often because .ics_rtas_init lacks a __init annotation or the annotation of .xics_register_ics is wrong. WARNING: arch/powerpc/sysdev/built-in.o(.text+0x6044): The function .ics_rtas_init() references the function __init .xics_register_ics(). This is often because .ics_rtas_init lacks a __init annotation or the annotation of .xics_register_ics is wrong. WARNING: arch/powerpc/kernel/built-in.o(.text+0x2db30): The function .start_secondary() references the function __cpuinit .vdso_getcpu_init(). This is often because .start_secondary lacks a __cpuinit annotation or the annotation of .vdso_getcpu_init is wrong. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
- 29 Jan, 2013 13 commits
-
-
Nishanth Aravamudan authored
There are now two kinds of DMA windows that might be presented by PowerVM DDW support -- huge windows (that can map all of system memory regardless of the LPAR configuration) and non-huge windows (which can't). They are implemented slightly differently in PowerVM, and thus have different characteristics. The most obvious is that slot isolate doesn't clear the TCEs/window for us with non-huge windows. Thus, when a DLPAR operation occurs on a slot using a non-huge window, TCEs are still present (the notifier chain doesn't currently remove them explicitly) and the DLPAR fails. Fix this by calling remove_ddw() first, which will unmap the DDW TCEs. Note: a corresponding change to drmgr is needed to actually successfully DLPAR, such that the device-tree update (which causes the notifier chain to fire) occurs before slot isolate. Signed-off-by:
-
Nishanth Aravamudan authored
tce_clearrange_multi_pSeriesLP is attempting to iterate over all TCEs in a given range. However, is it not advancing the dma_offset value passed to plpar_tce_stuff via the next value. This prevents DLPAR from completing, because TCEs are still present at slot isolation time. Signed-off-by:
-
Michael Neuling authored
Change the hardware breakpoint code so that we can support wider ranged breakpoints. This means both ptrace and perf hardware breakpoints can use upto 512 byte long breakpoints when using the DAWR and only 8 byte when using the DABR. Signed-off-by:
-
Michael Neuling authored
Currently we set the length field in the DAWR to 0 which defaults it to one double word (64bits) which is the same as the DABR. Change this so that we can set it to longer values as supported by the DAWR. Signed-off-by:
-
sukadev@linux.vnet.ibm.com authored
perf/Power: PERF_EVENT_IOC_ENABLE does not reenable event If we disable a perf event because we exceeded the specified ->event_limit, power_pmu_stop() sets the PERF_HES_STOPPED flag on the event. If the application then re-enables the event using PERF_EVENT_IOC_ENABLE ioctl, we don't ever clear this STOPPED flag. Consequently, the user space is never notified of the event. Following message has more background and test case. http://lists.eecs.utk.edu/pipermail/ptools-perfapi/2012-October/002528.html Used the following test cases to verify that this patch works on latest PAPI. $ papi.git/src/ctests/nonthread PAPI_TOT_CYC@5000000 $ papi.git/src/ctests/overflow_single_event Changelog[v2]: - [Paul Mackerras] Also clear PERF_HES_UPTODATE flag since we are restarting the event; cleanup comments and patch description. Signed-off-by:Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Li Zhong authored
Use local_paca directly in macro SHARED_PROCESSOR, as all processors have the same value for the field shared_proc, so we don't need care racy here. Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by:
-
Suzuki K. Poulose authored
Uprobes uses emulate_step in sstep.c, but we haven't explicitly specified the dependency. On pseries HAVE_HW_BREAKPOINT protects us, but 44x has no such luxury. Consolidate other users that depend on sstep and create a new config option. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
Suzuki K. Poulose <suzuki@in.ibm.com> Cc: linuxppc-dev@ozlabs.org Cc: stable@vger.kernel.org Signed-off-by:
-
Benjamin Collins authored
CTS-1000 is based on P4080. GPIO 27 is used to signal the FPGA to switch off power, and also associates IRQ 8 with front-panel button press (which we use to call orderly_poweroff()). The relevant device-tree looks like this: gpio0: gpio@130000 { compatible = "fsl,qoriq-gpio"; reg = <0x130000 0x1000>; interrupts = <55 2 0 0>; #gpio-cells = <2>; gpio-controller; /* Allows powering off the system via GPIO signal. */ gpio-halt@27 { compatible = "sgy,gpio-halt"; gpios = <&gpio0 27 0>; interrupts = <8 1 0 0>; }; }; Because the driver cannot match on sgy,gpio-halt (because the node is never processed through of_platform), it matches on fsl,qoriq-gpio and then checks child nodes for the matching sgy,gpio-halt. This also ensures that the GPIO controller is detected prior to sgy_cts1000's probe callback, since that node wont match via of_platform until the controller is registered. Also, because the GPIO handler for triggering system poweroff might sleep, the IRQ uses a workqueue to call orderly_poweroff(). As a final note, this driver may be expanded for other features specific to the CTS-1000. Signed-off-by:Ben Collins <ben.c@servergy.com> Cc: Jack Smith <jack.s@servergy.com> Cc: Vihar Rai <vihar.r@servergy.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Scott Wood authored
While this should be harmless now that distribute_irqs obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
Previously we were setting an illegal configuration on mpc85xx MPICs if CONFIG_IRQ_ALL_CPUS is enabled (which for some reason it is in mpc85xx_smp_defconfig). Signed-off-by:
-
Michael Neuling authored
We have a mix of decimal and hex here, so lets make them consistently hex. Also, strace will print them in hex if it can't decode them, so having them in hex here makes it easier to match up. No functional change. Signed-off-by:
-
Cody P Schafer authored
The only persistent change made by this loop is calling memblock_set_node() once for each memblock, which is not useful (and has no effect) as memblock_set_node() is not called with any memblock-specific parameters. Subsistute a single memblock_set_node(). Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
Merge "merge" branch to bring in various bug fixes that are going into 3.8
-
- 28 Jan, 2013 9 commits
-
-
Tiejun Chen authored
With lazy interrupt, we always call __check_irq_replaysome with decrementers_next_tb to check if we need to replay timer interrupt. So in hotplug case we also need to set decrementers_next_tb as MAX to make sure __check_irq_replay don't replay timer interrupt when return as we expect, otherwise we'll trap here infinitely. Signed-off-by:
Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by:
-
Cong Ding authored
the variable backup_current_thread_info isn't freed before existing the function. Signed-off-by:
Cong Ding <dinggnu@gmail.com> Signed-off-by:
-
Tiejun Chen authored
In preempt case current arch_local_irq_restore() from preempt_schedule_irq() may enable hard interrupt but we really should disable interrupts when we return from the interrupt, and so that we don't get interrupted after loading SRR0/1. Signed-off-by:
-
Carl E. Love authored
The calculation for the left shift of the mask OPROFILE_PM_PMCSEL_MSK has an error. The calculation is should be to shift left by (max_cntrs - cntr) times the width of the pmsel field width. However, the #define OPROFILE_MAX_PMC_NUM was used instead of OPROFILE_PMSEL_FIELD_WIDTH. This patch fixes the calculation. Signed-off-by:
Carl Love <cel@us.ibm.com> Acked-by:
-
Steven Rostedt authored
commit f96972f2 "kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()" added a call to disable_nonboot_cpus() on kernel_restart(), which tries to shutdown all the CPUs except the first one. The issue with the PA Semi, is that it does not support CPU hotplug. When the call is made to __cpu_down(), it calls the notifiers CPU_DOWN_PREPARE, and then tries to take the CPU down. One of the notifiers to the CPU hotplug code, is the cpufreq. The DOWN_PREPARE will call __cpufreq_remove_dev() which calls cpufreq_driver->exit. The PA Semi exit handler unmaps regions of I/O that is used by an interrupt that goes off constantly (system_reset_common, but it goes off during normal system operations too). I'm not sure exactly what this interrupt does. Running a simple function trace, you can see it goes off quite a bit: # tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <idle>-0 [001] 1558.859363: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.860112: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861109: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [001] 1558.861361: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861437: .pasemi_system_reset_exception <-.system_reset_exception When the region is unmapped, the system crashes with: Disabling non-boot CPUs ... Error taking CPU1 down: -38 Unable to handle kernel paging request for data at address 0xd0000800903a0100 Faulting instruction address: 0xc000000000055fcc Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=64 NUMA PA Semi PWRficient Modules linked in: shpchp NIP: c000000000055fcc LR: c000000000055fb4 CTR: c0000000000df1fc REGS: c0000000012175d0 TRAP: 0300 Not tainted (3.8.0-rc4-test-dirty) MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24000088 XER: 00000000 SOFTE: 0 DAR: d0000800903a0100, DSISR: 42000000 TASK = c0000000010e9008[0] 'swapper/0' THREAD: c000000001214000 CPU: 0 GPR00: d0000800903a0000 c000000001217850 c0000000012167e0 0000000000000000 GPR04: 0000000000000000 0000000000000724 0000000000000724 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000001 0000000000a70000 GPR12: 0000000024000080 c00000000fff0000 ffffffffffffffff 000000003ffffae0 GPR16: ffffffffffffffff 0000000000a21198 0000000000000060 0000000000000000 GPR20: 00000000008fdd35 0000000000a21258 000000003ffffaf0 0000000000000417 GPR24: 0000000000a226d0 c000000000000000 0000000000000000 0000000000000000 GPR28: c00000000138b358 0000000000000000 c000000001144818 d0000800903a0100 NIP [c000000000055fcc] .set_astate+0x5c/0xa4 LR [c000000000055fb4] .set_astate+0x44/0xa4 Call Trace: [c000000001217850] [c000000000055fb4] .set_astate+0x44/0xa4 (unreliable) [c0000000012178f0] [c00000000005647c] .restore_astate+0x2c/0x34 [c000000001217980] [c000000000054668] .pasemi_system_reset_exception+0x6c/0x88 [c000000001217a00] [c000000000019ef0] .system_reset_exception+0x48/0x84 [c000000001217a80] [c000000000001e40] system_reset_common+0x140/0x180 Signed-off-by:
-
Li Zhong authored
This patch fixes MAX_STACK_TRACE_ENTRIES too low warning for ppc32, which is similar to commit 12660b17. Reported-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds authored
Pull GFS2 fix from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: fix skip unlock condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "One fix for the AMD IOMMU driver to work around broken BIOSes found in the field. Some BIOSes forget to enable a workaround for a hardware problem which might cause the IOMMU to stop working under high load conditions. The fix makes sure this workaround is enabled." * tag 'iommu-fixes-v3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: IOMMU, AMD Family15h Model10-1Fh erratum 746 Workaround
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
Pull MFD fixes from Samuel Ortiz: "This is the first pull request for MFD fixes for 3.8 We have some build failure fixes (twl4030, vexpress, abx500 and tps65910), some actual runtime oops and lockup fixes (rtsx, da9052), and some more hypothetical NULL pointers dereferences fixes for pcf50633 and max776xx. Then we also have additional rtsx fixes for a correct switch output voltage and clock divider correctness for rtl8411 (rtsx driver), and irqdomain fix for db8550-prcmu, and some more cosmetic fixes for arizona and wm5102." * tag 'mfd-for-linus-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: rtsx: Fix oops when rtsx_pci_sdmmc is not probed mfd: wm5102: Fix definition of WM5102_MAX_REGISTER mfd: twl4030: Don't warn about uninitialized return code mfd: da9052/53 lockup fix mfd: rtsx: Add clock divider hook mmc: rtsx: Call MFD hook to switch output voltage mfd: rtsx: Add output voltage switch hook mfd: Fix compile errors and warnings when !CONFIG_AB8500_BM mfd: vexpress: Export global functions to fix build error mfd: arizona: Check errors from regcache_sync() mfd: tc3589x: Use simple irqdomain mfd: pcf50633: Init pcf->dev before using it mfd: max77693: Init max77693->dev before using it mfd: max77686: Init max77686->dev before using it mfd: db8500-prcmu: Fix irqdomain usage mfd: tps65910: Select REGMAP_IRQ in Kconfig to fix build error mfd: arizona: Disable control interface reporting for WM5102 and WM5110
-
