- 12 Jul, 2021 25 commits
-
-
Tomi Valkeinen authored
cal_camerarx->dev field is not used, remove it. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tomi Valkeinen authored
cal_camerarx_create() doesn't handle error returned from cal_camerarx_sd_init_cfg(). Fix this. Signed-off-by:
-
Tomi Valkeinen authored
v4l2-compliance complains about g/s_parm when using the non-MC API. Fix it by adding the functions and just call v4l2_s/g_parm_cap for the phy subdev. Signed-off-by:
-
Colin Ian King authored
The continue statement at the end of a for-loop has no effect, remove it. Addresses-Coverity: ("Continue has no effect") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Yang Yingliang authored
Convert list_for_each() to list_for_each_entry() where applicable. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Herman authored
Change 'gettig' into 'getting'. Signed-off-by:
Herman <yanshuaijun@yulong.com> Signed-off-by:
-
Hans Verkuil authored
The max number of allowed logical addresses was set to 1 in vivid, for no good reason. This prevented testing with multiple logical addresses for the same CEC device. Increase this number to CEC_MAX_LOG_ADDRS. Signed-off-by:
-
Krzysztof Hałasa authored
Without this patch, the TDA19971 chip's EDID is inactive. EDID never worked with this driver, it was all tested with HDMI signal sources which don't need EDID support. Signed-off-by:
Krzysztof Halasa <khalasa@piap.pl> Fixes: 9ac0038d ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by:
-
Herman authored
media: drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c : fix typo 'in deed imporant' > 'indeed important' Change 'imporant' into 'important'. Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'saa7134_pgtable_alloc()', GFP_KERNEL can be used because its 4 callers (one function calls it 2 times, so there is only 3 functions that call it): .hw_params in a struct snd_pcm_ops (saa7134-alsa.c) --> snd_card_saa7134_hw_params (saa7134-alsa.c) --> saa7134_pgtable_alloc ==> .hw_params function can use GFP_KERNEL saa7134_initdev (saa7134-core.c) --> saa7134_hwinit1 (saa7134-core.c) --> saa7134_ts_init1 (saa7134-ts.c) --> saa7134_pgtable_alloc ==> saa7134_initdev already uses GFP_KERNEL saa7134_initdev (saa7134-core.c) --> saa7134_hwinit1 (saa7134-core.c) --> saa7134_video_init1 (saa7134-video.c) --> saa7134_pgtable_alloc (called 2 times) ==> saa7134_initdev already uses GFP_KERNEL and no spin_lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
lijian authored
deleted the repeated word 'the' in the comments. Signed-off-by:
lijian <lijian@yulong.com> Signed-off-by:
-
Herman authored
Change 'Proabably' into 'Probably'. Signed-off-by:
-
Eugen Hristev authored
SAMA5D2 does not have the YCYC field for the RLP (rounding, limiting, packaging) module. The YCYC field is supposed to work with interleaved YUV formats like YUYV. In SAMA5D2, we have to use YYCC field, which is used for both planar formats like YUV420 and interleaved formats like YUYV. Fix the according rlp callback to replace the generic YCYC field (which makes more sense from a logical point of view) with the required YYCC field. Fixes: debfa496 ("media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules") Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Herman authored
Change 'Fliker' into 'Flicker'. Signed-off-by:
-
Herman authored
change 'syncrous' into 'synchronous' Signed-off-by:
-
Jernej Skrabec authored
Now that segment address is available, support for multi-slice frames can be easily added. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jernej Skrabec authored
If HEVC frame consists of multiple slices, segment address has to be known in order to properly decode it. Add segment address field to slice parameters. Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/pci/ivtv/ivtv-i2c.c:245 ivtv_i2c_register() error: buffer overflow 'hw_devicenames' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:266 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:269 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:275 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:280 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 drivers/media/pci/ivtv/ivtv-i2c.c:290 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31 The logic at ivtv_i2c_register() could let buffer overflows at hw_devicenames and hw_addrs arrays. This won't happen in practice due to a carefully-contructed logic, but it is not error-prune. Change the logic in a way that will make clearer that the I2C hardware flags will affect the size of those two arrays, and add an explicit check to avoid buffer overflows. While here, use the bit macro. Reviewed-by:
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i) drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i) those two functions call uvc_query_ctrl passing a pointer to a data at the DMA stack. those are used to send URBs via usb_control_msg(). Using DMA stack is not supported and should not work anymore on modern Linux versions. So, use a kmalloc'ed buffer. Cc: stable@vger.kernel.org # Kernel 4.9 and upper Reviewed-by:
-
Mauro Carvalho Chehab authored
The logic at delta_ipc_open() tries to copy past the size of the name passed to it: drivers/media/platform/sti/delta/delta-ipc.c:178 delta_ipc_open() error: __memcpy() 'name' too small (17 vs 32) Basically,this function is called just one with: ret = delta_ipc_open(pctx, "JPEG_DECODER_HW0", ...); The string used there has just 17 bytes. Yet, the logic tries to copy the entire name size (32 bytes), which is plain wrong. Replace it by strscpy, which is good enough to copy the string, warranting that this will be NUL-terminated. Signed-off-by: -
Mauro Carvalho Chehab authored
The logic at dib8000_get_init_prbs() has a few issues: 1. the tables used there has an extra unused value at the beginning; 2. the dprintk() message doesn't write the right value when transmission mode is not 8K; 3. the array overflow validation is done by the callers. Rewrite the code to fix such issues. This should also shut up those smatch warnings: drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14 drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14 drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14 drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14 Signed-off-by: -
Ezequiel Garcia authored
Drop the "default m", as options should default to disabled. No other media driver is enabled by default. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Hans Verkuil authored
Fix typo in a define: CEC_OP_REC_SEQ_SATERDAY -> CEC_OP_REC_SEQ_SATURDAY This isn't used yet in actual applications to the best of my knowledge, and it certainly doesn't break the ABI since the value doesn't change. Signed-off-by:
-
Ján Čáni authored
Add Geniatech MyGica T230C2_LITE and T230A as many people are asking support for these devices on forums. Link: https://lore.kernel.org/linux-media/YMuptIYFLdwSmw//@kaliSigned-off-by:
Ján Čáni <pego149@gmail.com> Signed-off-by:
-
- 11 Jul, 2021 11 commits
-
-
Linus Torvalds authored
-
Hugh Dickins authored
I know nothing about zone_device pages and !device_private pages; but if try_to_migrate_one() will do nothing for them, then it's better that try_to_migrate() filter them first, than trawl through all their vmas. Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been cleared by the time it got page table lock, page_vma_mapped_walk_done() must be called before returning, either explicitly, or by a final call to page_vma_mapped_walk() - otherwise the page table remains locked. Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap") Signed-off-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Hugh Dickins authored
The kernel recovers in due course from missing Mlocked pages: but there was no point in calling page_mlock() (formerly known as try_to_munlock()) on a THP, because nothing got done even when it was found to be mapped in another VM_LOCKED vma. It's true that we need to be careful: Mlocked accounting of pte-mapped THPs is too difficult (so consistently avoided); but Mlocked accounting of only-pmd-mapped THPs is supposed to work, even when multiple mappings are mlocked and munlocked or munmapped. Refine the tests. There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so page_mlock_one() does not even have to worry about that complication. (I said the kernel recovers: but would page reclaim be likely to split THP before rediscovering that it's VM_LOCKED? I've not followed that up) Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by:
-
Hugh Dickins authored
Parallel developments in mm/rmap.c have left behind some out-of-date comments: try_to_migrate_one() also accepts TTU_SYNC (already commented in try_to_migrate() itself), and try_to_migrate() returns nothing at all. TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so delete the "recently referenced" comment from try_to_unmap_one() (once upon a time the comment was near the removed codeblock, but they drifted apart). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Two fixes: - Fix a MIPS IRQ handling RCU bug - Remove a DocBook annotation for a parameter that doesn't exist anymore" * tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry genirq/irqdesc: Drop excess kernel-doc entry @lookup -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three fixes: - Fix load tracking bug/inconsistency - Fix a sporadic CFS bandwidth constraints enforcement bug - Fix a uclamp utilization tracking bug for newly woken tasks" * tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Ignore max aggregation if rq is idle sched/fair: Fix CFS bandwidth hrtimer expiry type sched/fair: Sync load_sum with load_avg after dequeue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "A fix and a hardware-enablement addition: - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup - Add cstate event support for Intel ICELAKE_X and ICELAKE_D" * tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Clean up error handling path of iio mapping perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: - Fix a Sparc crash - Fix a number of objtool warnings - Fix /proc/lockdep output on certain configs - Restore a kprobes fail-safe * tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: sparc: Fix arch_cmpxchg64_local() kprobe/static_call: Restore missing static_call_text_reserved() static_call: Fix static_call_text_reserved() vs __init jump_label: Fix jump_label_text_reserved() vs __init locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: "New features: - Enable use of BPF counters with 'perf stat --for-each-cgroup', using per-CPU 'cgroup-switch' events with an attached BPF program that does aggregation per-cgroup in the kernel instead of using per-cgroup perf events. - Add Topdown metrics L2 events as default events in 'perf stat' for systems having those events. Hardware tracing: - Add a config for max loops without consuming a packet in the Intel PT packet decoder, set via 'perf config intel-pt.max-loops=N' Hardware enablement: - Disable misleading NMI watchdog message in 'perf stat' on hybrid systems such as Intel Alder Lake. - Add a dummy event on hybrid systems to collect metadata records. - Add 24x7 nest metric events for the Power10 platform. Fixes: - Fix event parsing for PMUs starting with the same prefix. - Fix the 'perf trace' 'trace' alias installation dir. - Fix buffer size to report iregs in perf script python scripts, supporting the extended registers in PowerPC. - Fix overflow in elf_sec__is_text(). - Fix 's' on source line when disasm is empty in the annotation TUI, accessible via 'perf annotate', 'perf report' and 'perf top'. - Plug leaks in scandir() returned dirent entries in 'perf test' when sorting the shell tests. - Fix --task and --stat with pipe input in 'perf report'. - Fix 'perf probe' use of debuginfo files by build id. - If a DSO has both dynsym and symtab ELF sections, read from both when loading the symbol table, fixing a problem processing Fedora 32 glibc DSOs. Libraries: - Add grouping of events to libperf, from code in tools/perf, allowing libperf users to use that mode. Misc: - Filter plt stubs from the 'perf probe --functions' output. - Update UAPI header copies for asound, DRM, mman-common.h and the ones affected by the quotactl_fd syscall" * tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits) perf test: Add free() calls for scandir() returned dirent entries libperf: Add tests for perf_evlist__set_leader() libperf: Remove BUG_ON() from library code in get_group_fd() libperf: Add group support to perf_evsel__open() perf tools: Fix pattern matching for same substring in different PMU type perf record: Add a dummy event on hybrid systems to collect metadata records perf stat: Add Topdown metrics L2 events as default events libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader() libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups libperf: Move 'leader' from tools/perf to perf_evsel::leader libperf: Move 'idx' from tools/perf to perf_evsel::idx libperf: Change tests to single static and shared binaries perf intel-pt: Add a config for max loops without consuming a packet perf stat: Disable the NMI watchdog message on hybrid perf vendor events power10: Adds 24x7 nest metric events for power10 platform perf script python: Fix buffer size to report iregs in perf script perf trace: Fix the perf trace link location perf top: Fix overflow in elf_sec__is_text() perf annotate: Fix 's' on source line when disasm is empty perf probe: Do not show @plt function by default ...
-
- 10 Jul, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Mostly documentation/comment changes and non urgent fixes. - add or fix SPDX identifiers - NXP pcf*: fix datasheet URLs - imxdi: add wakeup support - pcf2127: handle timestamp interrupts, this fixes a possible interrupt storm - bd70528: Drop BD70528 support" * tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: pcf8523: rename register and bit defines rtc: pcf2127: handle timestamp interrupts rtc: at91sam9: Remove unnecessary offset variable checks rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt() rtc: spear: convert to SPDX identifier rtc: tps6586x: convert to SPDX identifier rtc: tps80031: convert to SPDX identifier rtc: rtd119x: Fix format of SPDX identifier rtc: sc27xx: Fix format of SPDX identifier rtc: palmas: convert to SPDX identifier rtc: max6900: convert to SPDX identifier rtc: ds1374: convert to SPDX identifier rtc: au1xxx: convert to SPDX identifier rtc: pcf85063: Update the PCF85063A datasheet revision dt-bindings: rtc: ti,bq32k: take maintainership rtc: pcf8563: Fix the datasheet URL rtc: pcf85063: Fix the datasheet URL rtc: pcf2127: Fix the datasheet URL dt-bindings: rtc: ti,bq32k: Convert to json-schema dt-bindings: rtc: rx8900: Convert to YAML schema ... -
Mel Gorman authored
Commit dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock") folded in a workaround patch for pahole that was unable to deal with zero-sized percpu structures. A superior workaround is achieved with commit a0b8200d ("kbuild: skip per-CPU BTF generation for pahole v1.18-v1.21"). This patch reverts the dummy field and the pahole version check. Fixes: dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock") Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Alexandre Belloni authored
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly and defines REG_OFFSET. Rename the register and bit definition to something specific to the driver. Fixes: 7fd70c65 ("ARM: irqstat: Get rid of duplicated declaration") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "13 cifs/smb3 fixes. Most are to address minor issues pointed out by Coverity. Also includes a packet signing enhancement and mount improvement" * tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal version number cifs: prevent NULL deref in cifs_compose_mount_options() SMB3.1.1: Add support for negotiating signing algorithm cifs: use helpers when parsing uid/gid mount options and validate them CIFS: Clarify SMB1 code for POSIX Lock CIFS: Clarify SMB1 code for rename open file CIFS: Clarify SMB1 code for delete CIFS: Clarify SMB1 code for SetFileSize smb3: fix typo in header file CIFS: Clarify SMB1 code for UnixSetPathInfo CIFS: Clarify SMB1 code for UnixCreateSymLink cifs: clarify SMB1 code for UnixCreateHardLink cifs: make locking consistent around the server session status
-
