Pull vfs open fixlet from Christian Brauner:
 "EINVAL ist keinmal: This contains the changes to make O_DIRECTORY when
  specified together with O_CREAT an invalid request.

  The wider background is that a regression report about the behavior of
  O_DIRECTORY | O_CREAT was sent to fsdevel about a behavior that was
  changed multiple years and LTS releases earlier during v5.7
  development.

  This has also been covered in

        https://lwn.net/Articles/926782/

  which provides an excellent summary of the discussion"

* tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  open: return EINVAL for O_DIRECTORY | O_CREAT

Pull misc vfs updates from Christian Brauner:
 "This contains a pile of various smaller fixes. Most of them aren't
  very interesting so this just highlights things worth mentioning:

   - Various filesystems contained the same little helper to convert
     from the mode of a dentry to the DT_* type of that dentry.

     They have now all been switched to rely on the generic
     fs_umode_to_dtype() helper. All custom helpers are removed (Jeff)

   - Fsnotify now reports ACCESS and MODIFY events for splice
     (Chung-Chiang Cheng)

   - After converting timerfd a long time ago to rely on
     wait_event_interruptible_*() apis, convert eventfd as well. This
     removes the complex open-coded wait code (Wen Yang)

   - Simplify sysctl registration for devpts, avoiding the declaration
     of two tables. Instead, just use a prefixed path with
     register_sysctl() (Luis)

   - The setattr_should_drop_sgid() helper is now exported so NFS can
     use it. By switching NFS to this helper an NFS setgid inheritance
     bug is fixed (me)"

* tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
  pnode: pass mountpoint directly
  eventfd: use wait_event_interruptible_locked_irq() helper
  splice: report related fsnotify events
  fs: consolidate duplicate dt_type helpers
  nfs: use vfs setgid helper
  Update relatime comments to include equality
  fs/buffer: Remove redundant assignment to err
  fs_context: drop the unused lsm_flags member
  fs/namespace: fnic: Switch to use %ptTd
  Documentation: update idmappings.rst
  devpts: simplify two-level sysctl registration for pty_kern_table
  eventpoll: align comment with nested epoll limitation

Pull acl updates from Christian Brauner:
 "After finishing the introduction of the new posix acl api last cycle
  the generic POSIX ACL xattr handlers are still around in the
  filesystems xattr handlers for two reasons:

   (1) Because a few filesystems rely on the ->list() method of the
       generic POSIX ACL xattr handlers in their ->listxattr() inode
       operation.

   (2) POSIX ACLs are only available if IOP_XATTR is raised. The
       IOP_XATTR flag is raised in inode_init_always() based on whether
       the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
       handlers of the filesystem are used to raise IOP_XATTR. Removing
       the generic POSIX ACL xattr handlers from all filesystems would
       risk regressing filesystems that only implement POSIX ACL support
       and no other xattrs (nfs3 comes to mind).

  This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
  as they don't depend on xattr handlers anymore. So it's now possible
  to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
  list of all filesystems. This is a crucial step as the generic POSIX
  ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
  don't depend on the xattr infrastructure anymore.

  Adressing problem (1) will require more long-term work. It would be
  best to get rid of the ->list() method of xattr handlers completely at
  some point.

  For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
  ACL xattr handler is kept around so they can continue to use
  array-based xattr handler indexing.

  This update does simplify the ->listxattr() implementation of all
  these filesystems however"

* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  acl: don't depend on IOP_XATTR
  ovl: check for ->listxattr() support
  reiserfs: rework priv inode handling
  fs: rename generic posix acl handlers
  reiserfs: rework ->listxattr() implementation
  fs: simplify ->listxattr() implementation
  fs: drop unused posix acl handlers
  xattr: remove unused argument
  xattr: add listxattr helper
  xattr: simplify listxattr helpers

Pull pidfd updates from Christian Brauner:
 "This adds a new pidfd_prepare() helper which allows the caller to
  reserve a pidfd number and allocates a new pidfd file that stashes the
  provided struct pid.

  It should be avoided installing a file descriptor into a task's file
  descriptor table just to close it again via close_fd() in case an
  error occurs. The fd has been visible to userspace and might already
  be in use. Instead, a file descriptor should be reserved but not
  installed into the caller's file descriptor table.

  If another failure path is hit then the reserved file descriptor and
  file can just be put without any userspace visible side-effects. And
  if all failure paths are cleared the file descriptor and file can be
  installed into the task's file descriptor table.

  This helper is now used in all places that open coded this
  functionality before. For example, this is currently done during
  copy_process() and fanotify used pidfd_create(), which returns a pidfd
  that has already been made visibile in the caller's file descriptor
  table, but then closed it using close_fd().

  In one of the next merge windows there is also new functionality
  coming to unix domain sockets that will have to rely on
  pidfd_prepare()"

* tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fanotify: use pidfd_prepare()
  fork: use pidfd_prepare()
  pid: add pidfd_prepare()

Pull user work thread updates from Christian Brauner:
 "This contains the work generalizing the ability to create a kernel
  worker from a userspace process.

  Such user workers will run with the same credentials as the userspace
  process they were created from providing stronger security and
  accounting guarantees than the traditional override_creds() approach
  ever could've hoped for.

  The original work was heavily based and optimzed for the needs of
  io_uring which was the first user. However, as it quickly turned out
  the ability to create user workers inherting properties from a
  userspace process is generally useful.

  The vhost subsystem currently creates workers using the kthread api.
  The consequences of using the kthread api are that RLIMITs don't work
  correctly as they are inherited from khtreadd. This leads to bugs
  where more workers are created than would be allowed by the RLIMITs of
  the userspace process in lieu of which workers are created.

  Problems like this disappear with user workers created from the
  userspace processes for which they perform the work. In addition,
  providing this api allows vhost to remove additional complexity. For
  example, cgroup and mm sharing will just work out of the box with user
  workers based on the relevant userspace process instead of manually
  ensuring the correct cgroup and mm contexts are used.

  So the vhost subsystem should simply be made to use the same mechanism
  as io_uring. To this end the original mechanism used for
  create_io_thread() is generalized into user workers:

   - Introduce PF_USER_WORKER as a generic indicator that a given task
     is a user worker, i.e., a kernel task that was created from a
     userspace process. Now a PF_IO_WORKER thread is just a specialized
     version of PF_USER_WORKER. So io_uring io workers raise both flags.

   - Make copy_process() available to core kernel code

   - Extend struct kernel_clone_args with the following bitfields
     allowing to indicate to copy_process():
       - to create a user worker (raise PF_USER_WORKER)
       - to not inherit any files from the userspace process
       - to ignore signals

  After all generic changes are in place the vhost subsystem implements
  a new dedicated vhost api based on user workers. Finally, vhost is
  switched to rely on the new api moving it off of kthreads.

  Thanks to Mike for sticking it out and making it through this rather
  arduous journey"

* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  vhost: use vhost_tasks for worker threads
  vhost: move worker thread fields to new struct
  vhost_task: Allow vhost layer to use copy_process
  fork: allow kernel code to call copy_process
  fork: Add kernel_clone_args flag to ignore signals
  fork: add kernel_clone_args flag to not dup/clone files
  fork/vm: Move common PF_IO_WORKER behavior to new flag
  kernel: Make io_thread and kthread bit fields
  kthread: Pass in the thread's name during creation
  kernel: Allow a kernel thread's name to be set in copy_process
  csky: Remove kernel_thread declaration

Pull clone3 selftest fix from Christian Brauner:
 "This is a single fix to the clone3() selftstests.

  It fell through the sefltest tree cracks a few times so I'll provide
  it here. It has low urgency but we should still correctly report the
  number of tests"

* tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests/clone3: fix number of tests in ksft_set_plan

Pull documentation updates from Jonathan Corbet:
 "Commit volume in documentation is relatively low this time, but there
  is still a fair amount going on, including:

   - Reorganize the architecture-specific documentation under
     Documentation/arch

     This makes the structure match the source directory and helps to
     clean up the mess that is the top-level Documentation directory a
     bit. This work creates the new directory and moves x86 and most of
     the less-active architectures there.

     The current plan is to move the rest of the architectures in 6.5,
     with the patches going through the appropriate subsystem trees.

   - Some more Spanish translations and maintenance of the Italian
     translation

   - A new "Kernel contribution maturity model" document from Ted

   - A new tutorial on quickly building a trimmed kernel from Thorsten

  Plus the usual set of updates and fixes"

* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
  media: Adjust column width for pdfdocs
  media: Fix building pdfdocs
  docs: clk: add documentation to log which clocks have been disabled
  docs: trace: Fix typo in ftrace.rst
  Documentation/process: always CC responsible lists
  docs: kmemleak: adjust to config renaming
  ELF: document some de-facto PT_* ABI quirks
  Documentation: arm: remove stih415/stih416 related entries
  docs: turn off "smart quotes" in the HTML build
  Documentation: firmware: Clarify firmware path usage
  docs/mm: Physical Memory: Fix grammar
  Documentation: Add document for false sharing
  dma-api-howto: typo fix
  docs: move m68k architecture documentation under Documentation/arch/
  docs: move parisc documentation under Documentation/arch/
  docs: move ia64 architecture docs under Documentation/arch/
  docs: Move arc architecture docs under Documentation/arch/
  docs: move nios2 documentation under Documentation/arch/
  docs: move openrisc documentation under Documentation/arch/
  docs: move superh documentation under Documentation/arch/
  ...

Merge tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:

 - several fixes to kunit tool

 - new klist structure test

 - support for m68k under QEMU

 - support for overriding the QEMU serial port

 - support for SH under QEMU

* tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: add tests for using current KUnit test field
  kunit: tool: Add support for SH under QEMU
  kunit: tool: Add support for overriding the QEMU serial port
  .gitignore: Unignore .kunitconfig
  list: test: Test the klist structure
  kunit: increase KUNIT_LOG_SIZE to 2048 bytes
  kunit: Use gfp in kunit_alloc_resource() kernel-doc
  kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py
  kunit: tool: remove unused imports and variables
  kunit: tool: add subscripts for type annotations where appropriate
  kunit: fix bug of extra newline characters in debugfs logs
  kunit: fix bug in the order of lines in debugfs logs
  kunit: fix bug in debugfs logs of parameterized tests
  kunit: tool: Add support for m68k under QEMU

Merge tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - several patches to enhance and fix resctrl test

 - nolibc support for kselftest with an addition to vprintf() to
   tools/nolibc/stdio and related test changes

 - Refactor 'peeksiginfo' ptrace test part

 - add 'malloc' failures checks in cgroup test_memcontrol

 - a new prctl test

 - enhancements sched test with additional ore schedule prctl calls

* tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests/resctrl: Fix incorrect error return on test complete
  selftests/resctrl: Remove duplicate codes that clear each test result file
  selftests/resctrl: Commonize the signal handler register/unregister for all tests
  selftests/resctrl: Cleanup properly when an error occurs in CAT test
  selftests/resctrl: Flush stdout file buffer before executing fork()
  selftests/resctrl: Return MBA check result and make it to output message
  selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test
  selftests/resctrl: Use correct exit code when tests fail
  kselftest/arm64: Convert za-fork to use kselftest.h
  kselftest: Support nolibc
  tools/nolibc/stdio: Implement vprintf()
  selftests/resctrl: Correct get_llc_perf() param in function comment
  selftests/resctrl: Use remount_resctrlfs() consistently with boolean
  selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH
  selftests/resctrl: Change initialize_llc_perf() return type to void
  selftests/resctrl: Replace obsolete memalign() with posix_memalign()
  selftests/resctrl: Check for return value after write_schemata()
  selftests/resctrl: Allow ->setup() to return errors
  selftests/resctrl: Move ->setup() call outside of test specific branches
  selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem
  ...

Pull RCU updates from Joel Fernandes:

 - Updates and additions to MAINTAINERS files, with Boqun being added to
   the RCU entry and Zqiang being added as an RCU reviewer.

   I have also transitioned from reviewer to maintainer; however, Paul
   will be taking over sending RCU pull-requests for the next merge
   window.

 - Resolution of hotplug warning in nohz code, achieved by fixing
   cpu_is_hotpluggable() through interaction with the nohz subsystem.

   Tick dependency modifications by Zqiang, focusing on fixing usage of
   the TICK_DEP_BIT_RCU_EXP bitmask.

 - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
   kernels, fixed by Zqiang.

 - Improvements to rcu-tasks stall reporting by Neeraj.

 - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
   increased robustness, affecting several components like mac802154,
   drbd, vmw_vmci, tracing, and more.

   A report by Eric Dumazet showed that the API could be unknowingly
   used in an atomic context, so we'd rather make sure they know what
   they're asking for by being explicit:

      https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/

 - Documentation updates, including corrections to spelling,
   clarifications in comments, and improvements to the srcu_size_state
   comments.

 - Better srcu_struct cache locality for readers, by adjusting the size
   of srcu_struct in support of SRCU usage by Christoph Hellwig.

 - Teach lockdep to detect deadlocks between srcu_read_lock() vs
   synchronize_srcu() contributed by Boqun.

   Previously lockdep could not detect such deadlocks, now it can.

 - Integration of rcutorture and rcu-related tools, targeted for v6.4
   from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
   module parameter, and more

 - Miscellaneous changes, various code cleanups and comment improvements

* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
  checkpatch: Error out if deprecated RCU API used
  mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
  rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
  ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
  net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
  net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
  rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
  rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
  rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
  rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
  rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
  rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
  rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
  rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
  rcu/trace: use strscpy() to instead of strncpy()
  tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
  ...

Pull nolibc updates from Paul McKenney:

 - Add support for loongarch

 - Fix stack-protector issues

 - Support additional integral types and signal-related macros

 - Add support for stdin, stdout, and stderr

 - Add getuid() and geteuid()

 - Allow S_I* macros to be overridden by program

 - Defer to linux/fcntl.h and linux/stat.h to avoid duplicate
   definitions

 - Many improvements to the selftests

* tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (22 commits)
  tools/nolibc: x86_64: add stackprotector support
  tools/nolibc: i386: add stackprotector support
  tools/nolibc: tests: add test for -fstack-protector
  tools/nolibc: tests: fold in no-stack-protector cflags
  tools/nolibc: add support for stack protector
  tools/nolibc: tests: constify test_names
  tools/nolibc: add helpers for wait() signal exits
  tools/nolibc: add definitions for standard fds
  selftests/nolibc: Adjust indentation for Makefile
  selftests/nolibc: Add support for LoongArch
  tools/nolibc: Add support for LoongArch
  tools/nolibc: Add statx() and make stat() rely on statx() if necessary
  tools/nolibc: Include linux/fcntl.h and remove duplicate code
  tools/nolibc: check for S_I* macros before defining them
  selftests/nolibc: skip the chroot_root and link_dir tests when not privileged
  tools/nolibc: add getuid() and geteuid()
  tools/nolibc: add tests for the integer limits in stdint.h
  tools/nolibc: enlarge column width of tests
  tools/nolibc: add integer types and integer limit macros
  tools/nolibc: add stdint.h
  ...

Merge tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull locktorture updates from Paul McKenney:
 "This adds tests for nested locking and also adds support for testing
  raw spinlocks in PREEMPT_RT kernels"

* tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  locktorture: Add raw_spinlock* torture tests for PREEMPT_RT kernels
  locktorture: With nested locks, occasionally skip main lock
  locktorture: Add nested locking to rtmutex torture tests
  locktorture: Add nested locking to mutex torture tests
  locktorture: Add nested_[un]lock() hooks and nlocks parameter

Merge tag 'lkmm-scripting.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull Linux Kernel Memory Model scripting updates from Paul McKenney:
 "This improves litmus-test documentation and improves the ability to do
  before/after tests on the https://github.com/paulmckrcu/litmus repo"

* tag 'lkmm-scripting.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
  tools/memory-model: Remove out-of-date SRCU documentation
  tools/memory-model: Document LKMM test procedure
  tools/memory-model: Use "grep -E" instead of "egrep"
  tools/memory-model: Use "-unroll 0" to keep --hw runs finite
  tools/memory-model: Make judgelitmus.sh handle scripted Result: tag
  tools/memory-model: Add data-race capabilities to judgelitmus.sh
  tools/memory-model: Add checktheselitmus.sh to run specified litmus tests
  tools/memory-model: Repair parseargs.sh header comment
  tools/memory-model:  Add "--" to parseargs.sh for additional arguments
  tools/memory-model: Make history-check scripts use mselect7
  tools/memory-model: Make checkghlitmus.sh use mselect7
  tools/memory-model: Fix scripting --jobs argument
  tools/memory-model: Implement --hw support for checkghlitmus.sh
  tools/memory-model: Add -v flag to jingle7 runs
  tools/memory-model: Make runlitmus.sh check for jingle errors
  tools/memory-model: Allow herd to deduce CPU type
  tools/memory-model: Keep assembly-language litmus tests
  tools/memory-model: Move from .AArch64.litmus.out to .litmus.AArch.out
  tools/memory-model: Make runlitmus.sh generate .litmus.out for --hw
  tools/memory-model: Split runlitmus.sh out of checklitmus.sh
  ...

Pull Linux Kernel Memory Model updates from Paul McKenney
 "This improves LKMM diagnostic messages, unifies handling of the
  ordering produced by unlock/lock pairs, adds support for the
  smp_mb__after_srcu_read_unlock() macro, removes redundant members from
  the to-r relation, brings SRCU read-side semantics into alignment with
  Linux-kernel SRCU, makes ppo a subrelation of po, and improves
  documentation"

* tag 'lkmm.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  Documentation: litmus-tests: Correct spelling
  tools/memory-model: Add documentation about SRCU read-side critical sections
  tools/memory-model: Make ppo a subrelation of po
  tools/memory-model: Provide exact SRCU semantics
  tools/memory-model: Restrict to-r to read-read address dependency
  tools/memory-model: Add smp_mb__after_srcu_read_unlock()
  tools/memory-model: Unify UNLOCK+LOCK pairings to po-unlock-lock-po
  tools/memory-model: Update some warning labels

Pull KCSAN updates from Paul McKenney:
 "Kernel concurrency sanitizer (KCSAN) updates for v6.4

  This fixes kernel-doc warnings and also updates instrumentation from
  READ_ONCE() to volatile in order to avoid unaligned load-acquire
  instructions on arm64 in kernels built with LTO"

* tag 'kcsan.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Avoid READ_ONCE() in read_instrumented_memory()
  instrumented.h: Fix all kernel-doc format warnings

Pull tpm updates from Jarkko Sakkinen:

 - The .machine keyring, used for Machine Owner Keys (MOK), acquired the
   ability to store only CA enforced keys, and put rest to the .platform
   keyring, thus separating the code signing keys from the keys that are
   used to sign certificates.

   This essentially unlocks the use of the .machine keyring as a trust
   anchor for IMA. It is an opt-in feature, meaning that the additional
   contraints won't brick anyone who does not care about them.

 - Enable interrupt based transactions with discrete TPM chips (tpm_tis).

   There was code for this existing but it never really worked so I
   consider this a new feature rather than a bug fix. Before the driver
   just fell back to the polling mode.

Link: https://lore.kernel.org/linux-integrity/a93b6222-edda-d43c-f010-a59701f2aeef@gmx.de/
Link: https://lore.kernel.org/linux-integrity/20230302164652.83571-1-eric.snowberg@oracle.com/

* tag 'tpmdd-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (29 commits)
  tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site
  tpm_tis: fix stall after iowrite*()s
  tpm/tpm_tis_synquacer: Convert to platform remove callback returning void
  tpm/tpm_tis: Convert to platform remove callback returning void
  tpm/tpm_ftpm_tee: Convert to platform remove callback returning void
  tpm: tpm_tis_spi: Mark ACPI and OF related data as maybe unused
  tpm: st33zp24: Mark ACPI and OF related data as maybe unused
  tpm, tpm_tis: Enable interrupt test
  tpm, tpm_tis: startup chip before testing for interrupts
  tpm, tpm_tis: Claim locality when interrupts are reenabled on resume
  tpm, tpm_tis: Claim locality in interrupt handler
  tpm, tpm_tis: Request threaded interrupt handler
  tpm, tpm: Implement usage counter for locality
  tpm, tpm_tis: do not check for the active locality in interrupt handler
  tpm, tpm_tis: Move interrupt mask checks into own function
  tpm, tpm_tis: Only handle supported interrupts
  tpm, tpm_tis: Claim locality before writing interrupt registers
  tpm, tpm_tis: Do not skip reset of original interrupt vector
  tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed
  tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register
  ...

Pull smack updates from Casey Schaufler:
 "There are two changes, one small and one more substantial:

   - Remove of an unnecessary cast

   - The mount option processing introduced with the mount rework makes
     copies of mount option values. There is no good reason to make
     copies of Smack labels, as they are maintained on a list and never
     removed.

     The code now uses pointers to entries on the list, reducing
     processing time and memory use"

* tag 'Smack-for-6.4' of https://github.com/cschaufler/smack-next:
  Smack: Improve mount process memory use
  smack_lsm: remove unnecessary type casting

Pull landlock update from Mickaël Salaün:
 "Improve user space documentation"

* tag 'landlock-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Clarify documentation for the LANDLOCK_ACCESS_FS_REFER right

Pull tomoyo update from Tetsuo Handa:
 "One cleanup patch from Vlastimil Babka"

* tag 'tomoyo-pr-20230424' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: replace tomoyo_round2() with kmalloc_size_roundup()

Pull lsm updates from Paul Moore:

 - Move the LSM hook comment blocks into security/security.c

   For many years the LSM hook comment blocks were located in a very odd
   place, include/linux/lsm_hooks.h, where they lived on their own,
   disconnected from both the function prototypes and definitions.

   In keeping with current kernel conventions, this moves all of these
   comment blocks to the top of the function definitions, transforming
   them into the kdoc format in the process. This should make it much
   easier to maintain these comments, which are the main source of LSM
   hook documentation.

   For the most part the comment contents were left as-is, although some
   glaring errors were corrected. Expect additional edits in the future
   as we slowly update and correct the comment blocks.

   This is the bulk of the diffstat.

 - Introduce LSM_ORDER_LAST

   Similar to how LSM_ORDER_FIRST is used to specify LSMs which should
   be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to
   specify LSMs which should be ordered after "normal" LSMs.

   This is one of the prerequisites for transitioning IMA/EVM to a
   proper LSM.

 - Remove the security_old_inode_init_security() hook

   The security_old_inode_init_security() LSM hook only allows for a
   single xattr which is problematic both for LSM stacking and the
   IMA/EVM-as-a-LSM effort. This finishes the conversion over to the
   security_inode_init_security() hook and removes the single-xattr LSM
   hook.

 - Fix a reiserfs problem with security xattrs

   During the security_old_inode_init_security() removal work it became
   clear that reiserfs wasn't handling security xattrs properly so we
   fixed it.

* tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits)
  reiserfs: Add security prefix to xattr name in reiserfs_security_write()
  security: Remove security_old_inode_init_security()
  ocfs2: Switch to security_inode_init_security()
  reiserfs: Switch to security_inode_init_security()
  security: Remove integrity from the LSM list in Kconfig
  Revert "integrity: double check iint_cache was initialized"
  security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
  device_cgroup: Fix typo in devcgroup_css_alloc description
  lsm: fix a badly named parameter in security_get_getsecurity()
  lsm: fix doc warnings in the LSM hook comments
  lsm: styling fixes to security/security.c
  lsm: move the remaining LSM hook comments to security/security.c
  lsm: move the io_uring hook comments to security/security.c
  lsm: move the perf hook comments to security/security.c
  lsm: move the bpf hook comments to security/security.c
  lsm: move the audit hook comments to security/security.c
  lsm: move the binder hook comments to security/security.c
  lsm: move the sysv hook comments to security/security.c
  lsm: move the key hook comments to security/security.c
  lsm: move the xfrm hook comments to security/security.c
  ...

Pull selinux updates from Paul Moore:

 - Stop passing the 'selinux_state' pointers as function arguments

   As discussed during the end of the last development cycle, passing a
   selinux_state pointer through the SELinux code has a noticeable
   impact on performance, and with the current code it is not strictly
   necessary.

   This simplifies things by referring directly to the single
   selinux_state global variable which should help improve SELinux
   performance.

 - Uninline the unlikely portions of avc_has_perm_noaudit()

   This change was also based on a discussion from the last development
   cycle, and is heavily based on an initial proof of concept patch from
   you. The core issue was that avc_has_perm_noaudit() was not able to
   be inlined, as intended, due to its size. We solved this issue by
   extracting the less frequently hit portions of avc_has_perm_noaudit()
   into a separate function, reducing the size of avc_has_perm_noaudit()
   to the point where the compiler began inlining the function. We also
   took the opportunity to clean up some ugly RCU locking in the code
   that became uglier with the change.

 - Remove the runtime disable functionality

   After several years of work by the userspace and distro folks, we are
   finally in a place where we feel comfortable removing the runtime
   disable functionality which we initially deprecated at the start of
   2020.

   There is plenty of information in the kernel's deprecation (now
   removal) notice, but the main motivation was to be able to safely
   mark the LSM hook structures as '__ro_after_init'.

   LWN also wrote a good summary of the deprecation this morning which
   offers a more detailed history:

        https://lwn.net/SubscriberLink/927463/dcfa0d4ed2872f03

 - Remove the checkreqprot functionality

   The original checkreqprot deprecation notice stated that the removal
   would happen no sooner than June 2021, which means this falls hard
   into the "better late than never" bucket.

   The Kconfig and deprecation notice has more detail on this setting,
   but the basic idea is that we want to ensure that the SELinux policy
   allows for the memory protections actually applied by the kernel, and
   not those requested by the process.

   While we haven't found anyone running a supported distro that is
   affected by this deprecation/removal, anyone who is affected would
   only need to update their policy to reflect the reality of their
   applications' mapping protections.

 - Minor Makefile improvements

   Some minor Makefile improvements to correct some dependency issues
   likely only ever seen by SELinux developers. I expect we will have at
   least one more tweak to the Makefile during the next merge window,
   but it didn't quite make the cutoff this time around.

* tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: ensure av_permissions.h is built when needed
  selinux: fix Makefile dependencies of flask.h
  selinux: stop returning node from avc_insert()
  selinux: clean up dead code after removing runtime disable
  selinux: update the file list in MAINTAINERS
  selinux: remove the runtime disable functionality
  selinux: remove the 'checkreqprot' functionality
  selinux: stop passing selinux_state pointers and their offspring
  selinux: uninline unlikely parts of avc_has_perm_noaudit()

Merge my x86 user copy updates branch.

This cleans up a lot of our x86 memory copy code, particularly for user
accesses.  I've been pushing for microarchitectural support for good
memory copying and clearing for a long while, and it's been visible in
how the kernel has aggressively used 'rep movs' and 'rep stos' whenever
possible.

And that micro-architectural support has been improving over the years,
to the point where on modern CPU's the best option for a memory copy
that would become a function call (as opposed to being something that
can just be turned into individual 'mov' instructions) is now to inline
the string instruction sequence instead.

However, that only makes sense when we have the modern markers for this:
the x86 FSRM and FSRS capabilities ("Fast Short REP MOVS/STOS").

So this cleans up a lot of our historical code, gets rid of the legacy
marker use ("REP_GOOD" and "ERMS") from the memcpy/memset cases, and
replaces it with that modern reality.  Note that REP_GOOD and ERMS end
up still being used by the known large cases (ie page copyin gand
clearing).

The reason much of this ends up being about user memory accesses is that
the normal in-kernel cases are done by the compiler (__builtin_memcpy()
and __builtin_memset()) and getting to the point where we can use our
instruction rewriting to inline those to be string instructions will
need some compiler support.

In contrast, the user accessor functions are all entirely controlled by
the kernel code, so we can change those arbitrarily.

Thanks to Borislav Petkov for feedback on the series, and Jens testing
some of this on micro-architectures I didn't personally have access to.

* x86-rep-insns:
  x86: rewrite '__copy_user_nocache' function
  x86: remove 'zerorest' argument from __copy_user_nocache()
  x86: set FSRS automatically on AMD CPUs that have FSRM
  x86: improve on the non-rep 'copy_user' function
  x86: improve on the non-rep 'clear_user' function
  x86: inline the 'rep movs' in user copies for the FSRM case
  x86: move stac/clac from user copy routines into callers
  x86: don't use REP_GOOD or ERMS for user memory clearing
  x86: don't use REP_GOOD or ERMS for user memory copies
  x86: don't use REP_GOOD or ERMS for small memory clearing
  x86: don't use REP_GOOD or ERMS for small memory copies

Use the same pattern as the compat version of this code does: instead of
copying the whole array to a kernel buffer and then having a separate
phase of verifying it, just do it one entry at a time, verifying as you
go.

On Jens' /dev/zero readv() test this improves performance by ~6%.

[ This was obviously triggered by Jens' ITER_UBUF updates series ]
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/de35d11d-bce7-e976-7372-1f2caf417103@kernel.dk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ITER_UBUF updates from Jens Axboe:
 "This turns singe vector imports into ITER_UBUF, rather than
  ITER_IOVEC.

  The former is more trivial to iterate and advance, and hence a bit
  more efficient. From some very unscientific testing, ~60% of all iovec
  imports are single vector"

* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
  iov_iter: Mark copy_compat_iovec_from_user() noinline
  iov_iter: import single vector iovecs as ITER_UBUF
  iov_iter: convert import_single_range() to ITER_UBUF
  iov_iter: overlay struct iovec and ubuf/len
  iov_iter: set nr_segs = 1 for ITER_UBUF
  iov_iter: remove iov_iter_iovec()
  iov_iter: add iter_iov_addr() and iter_iov_len() helpers
  ALSA: pcm: check for user backed iterator, not specific iterator type
  IB/qib: check for user backed iterator, not specific iterator type
  IB/hfi1: check for user backed iterator, not specific iterator type
  iov_iter: add iter_iovec() helper
  block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly

Pull ARM development updates from Russell King:
 "Four changes for v6.4:

   - simplify the path to the top vmlinux

   - three patches to fix vfp with instrumentation enabled (eg lockdep)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabled
  ARM: 9293/1: vfp: Pass successful return address via register R3
  ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entry
  ARM: 9291/1: decompressor: simplify the path to the top vmlinux

Intel compiler support has already been completely removed in commit
95207db8 ("Remove Intel compiler support").  However, it appears
that there is still some ICC-related code in scripts/cc-version.sh.
There is no harm in leaving the code as it is, but removing the dead
code makes the codebase a bit cleaner.

Hopefully all ICC-related stuff in the build scripts will be removed
after this commit, given the grep output as below:

	(linux/scripts) $ grep -i -w -R 'icc'
	cc-version.sh:ICC)
	cc-version.sh:	min_version=$($min_tool_version icc)
	dtc/include-prefixes/arm64/qcom/sm6350.dtsi:#include <dt-bindings/interconnect/qcom,icc.h>

Fixes: 95207db8 ("Remove Intel compiler support")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following crash was reported:

[ 1950.279393] list_del corruption, ffff99560d485790->next is NULL
[ 1950.279400] ------------[ cut here ]------------
[ 1950.279401] kernel BUG at lib/list_debug.c:49!
[ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1
[ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P,
BIOS F15c 05/11/2022
[ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0
[ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc
cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc
ff 0f 0b 48 89 fe
[ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246
[ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000
[ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff
[ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8
[ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000
[ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000
[ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000
[ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0
[ 1950.279426] PKRU: 55555554
[ 1950.279426] Call Trace:
[ 1950.279428] <TASK>
[ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core]
[ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm]

Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().

Cc: stable@vger.kernel.org
Reported-by: Martin Dimov <martin@dmarto.com>
Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/
Fixes: f1324bbc ("tpm: disable hwrng for fTPM on some AMD designs")
Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources")
Tested-by: Martin Dimov <martin@dmarto.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

ioread8() operations to TPM MMIO addresses can stall the CPU when
immediately following a sequence of iowrite*()'s to the same region.

For example, cyclitest measures ~400us latency spikes when a non-RT
usermode application communicates with an SPI-based TPM chip (Intel Atom
E3940 system, PREEMPT_RT kernel). The spikes are caused by a
stalling ioread8() operation following a sequence of 30+ iowrite8()s to
the same address. I believe this happens because the write sequence is
buffered (in CPU or somewhere along the bus), and gets flushed on the
first LOAD instruction (ioread*()) that follows.

The enclosed change appears to fix this issue: read the TPM chip's
access register (status code) after every iowrite*() operation to
amortize the cost of flushing data to chip across multiple instructions.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Link: https://lore.kernel.org/r/20230323153436.B2SATnZV@linutronix.deSigned-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

ftpm_tee_remove() returns zero unconditionally (and cannot easily
converted to return void). So ignore the return value to be able to make
ftpm_plat_tee_remove() return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The driver can be compile tested with !CONFIG_OF or !CONFIG_ACPI making
unused:

  drivers/char/tpm/tpm_tis_spi_main.c:234:34: error: ‘of_tis_spi_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The driver can be compile tested with !CONFIG_OF or !CONFIG_ACPI making

  drivers/char/tpm/st33zp24/i2c.c:141:34: error: ‘of_st33zp24_i2c_match’ defined but not used [-Werror=unused-const-variable=]
  drivers/char/tpm/st33zp24/spi.c:258:34: error: ‘of_st33zp24_spi_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The test for interrupts in tpm_tis_send() is skipped if the flag
TPM_CHIP_FLAG_IRQ is not set. Since the current code never sets the flag
initially the test is never executed.

Fix this by setting the flag in tpm_tis_gen_interrupt() right after
interrupts have been enabled and before the test is executed.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In tpm_tis_gen_interrupt() a request for a property value is sent to the
TPM to test if interrupts are generated. However after a power cycle the
TPM responds with TPM_RC_INITIALIZE which indicates that the TPM is not
yet properly initialized.
Fix this by first starting the TPM up before the request is sent. For this
the startup implementation is removed from tpm_chip_register() and put
into the new function tpm_chip_startup() which is called before the
interrupts are tested.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.

Fixes: 45baa1d1 ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The TIS interrupt handler at least has to read and write the interrupt
status register. In case of SPI both operations result in a call to
tpm_tis_spi_transfer() which uses the bus_lock_mutex of the spi device
and thus must only be called from a sleepable context.

To ensure this request a threaded interrupt handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.

By doing this refactor the names of the amended functions to use a more
appropriate prefix.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

After driver initialization tpm_tis_data->locality may only be modified in
case of a LOCALITY CHANGE interrupt. In this case the interrupt handler
iterates over all localities only to assign the active one to
tpm_tis_data->locality.

However this information is never used any more, so the assignment is not
needed.
Furthermore without the assignment tpm_tis_data->locality cannot change any
more at driver runtime, and thus no protection against concurrent
modification is required when the variable is read at other places.

So remove this iteration entirely.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>