- 25 Sep, 2016 24 commits
-
-
Claudiu Manoil authored
Add a self test for the DPAA 1.x Buffer Manager driver. This test ensures that the driver can properly acquire and release buffers using the BMan portal infrastructure. Signed-off-by:
Roy Pledge <roy.pledge@nxp.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
Scott Wood <oss@buserror.net>
-
Claudiu Manoil authored
This driver enables the Freescale DPAA 1.x Queue Manager block. QMan is a hardware accelerator that manages frame queues. It allows CPUs and other accelerators connected to the SoC datapath to enqueue and dequeue ethernet frames, thus providing the infrastructure for data exchange among CPUs and datapath accelerators. Signed-off-by:
-
Claudiu Manoil authored
This driver enables the Freescale DPAA 1.x Buffer Manager block. BMan is a hardware accelerator that manages buffer pools. It allows CPUs and other accelerators connected to the SoC datapath to acquire and release buffers during data processing. Signed-off-by:
-
Christophe Leroy authored
User space DTLB miss represent approximatly 90% of TLB misses so make it the shortest path. Also remove an unneccessary double jump in FixupDAR Before this patch, we spend 3.3 TB ticks in the handler for each user address miss and 3.4 TB ticks for each kernel address miss After this patch, we send 3.0 TB ticks in the handler for each user address miss and 3.9 TB ticks for each kernel address miss Taking into account that user misses represent 90% of the total, this patch provides an improvement of approx. 9% Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
When all options are activated, there is not enough space for the DTLBMiss handlers that handles IMMR area and linear RAM pages in the exception area once we have added hugepage handling. So lets move them after .0x2000 Signed-off-by:
-
Christophe Leroy authored
Signed-off-by:
-
Christophe Leroy authored
of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data. Therefore ->save_regs() cannot use gpiochip_get_data() An Oops is encountered without this fix. fixes: 1e714e54 ("powerpc: qe_lib-gpio: use gpiochip data pointer") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Christophe Leroy authored
During a machine check, the 8xx provides indication of whether the check is due to data or instruction access, so let's display it. Lets also move 8xx specific handling into the new handler. Signed-off-by:
-
Christophe Leroy authored
When the watchdog is in NMI mode, the system reset interrupt is generated when the watchdog counter expires. Signed-off-by:
-
Scott Wood authored
This allows PCI devices that can only address (e.g.) 36 or 40 bit DMA to use direct DMA, at the cost of not being able to DMA to non-RAM addresses (this doesn't affect MSIs as there is a separate dedicated window for that) which we wouldn't have been able to do anyway if the RAM size didn't trigger the creation of the second inbound window. It also fixes an off-by-one error that set dma_direct_ops on PCI devices whose dma mask could address all the space below the DMA offset (previously 40 bits), but not the window that starts at the DMA offset. Signed-off-by:
Tillmann Heidsieck <theidsieck@leenox.de>
-
Christophe Leroy authored
The 8xx has two special registers called EID (External Interrupt Disable) and EIE (External Interrupt Enable) for clearing/setting EE in MSR. It avoids the three instructions set mfmsr/ori/mtmsr or mfmsr/rlwinm/mtmsr and it avoids using a general register. We just have to write something in the special register to change MSR EE bit. So we write r0 into the register, regardless of r0 value. Writing to one of those two special registers also set the MSR RI bit, but this bit is only unset during beginning of exception prolog and end of exception epilog. When executing C-functions MSR RI is always set. Signed-off-by:
-
Kevin Hao authored
Factor out the common codes of setup arch functions to a separate function. It does make no sense to print a board specific info in setup arch functions, so use a more general one. For ASP8347E board, there is no pci device node. So it is safe to invoke mpc83xx_setup_pci() in its setup arch function even there is no such invocation in its original setup arch function. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Christophe Leroy authored
Commit 0e6e01ff ("CPM/QE: use genalloc to manage CPM/QE muram") has changed the way muram is managed. genalloc uses kmalloc(), hence requires the SLAB to be up and running. On powerpc 8xx, cpm_reset() is called early during startup. cpm_reset() then calls cpm_muram_init() before SLAB is available, hence the following Oops. cpm_reset() cannot be called during initcalls because the CPM is needed for console. This patch removes the call to cpm_muram_init() from cpm_reset(). cpm_muram_init() will be called from a new function called cpm_init() which is declared as subsys_initcall, unless cpm_muram_alloc() is called earlier for the serial console in which case cpm_muram_init() will be called from there. The reason for calling it from two places is that some drivers (e.g. i2c-cpm) need some of the initialisations done by cpm_muram_init() but don't call cpm_muram_alloc(). The console driver calls cpm_muram_alloc() but some platforms might not use the CPM serial ports for console. [ 0.000000] Unable to handle kernel paging request for data at address 0x00000008 [ 0.000000] Faulting instruction address: 0xc01acce0 [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.000000] PREEMPT CMPC885 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5 [ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000 [ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000 [ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn) [ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000 [ 0.000000] DAR: 00000008 DSISR: c0000000 GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8 GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000 GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001 [ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc [ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] Call Trace: [ 0.000000] [c0537f00] [00000200] 0x200 (unreliable) [ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8 [ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30 [ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168 [ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380 [ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98 [ 0.000000] Instruction dump: [ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6 [ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f [ 0.000000] ---[ end trace dc8fa200cb88537f ]--- fixes: 0e6e01ff ("CPM/QE: use genalloc to manage CPM/QE muram") Cc: stable@vger.linux.org Signed-off-by:
-
Julia Lawall authored
Use of_property_read_bool to check for the existence of a property. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; statement S2,S1; @@ - if (of_get_property(e1,e2,NULL)) + if (of_property_read_bool(e1,e2)) S1 else S2 // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
Use of_property_read_bool to check for the existence of a property. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; statement S2,S1; @@ - if (of_get_property(e1,e2,NULL)) + if (of_property_read_bool(e1,e2)) S1 else S2 // </smpl> Signed-off-by:
-
Andrey Smirnov authored
Convert fsl_rstcr_restart into a function to be registered with register_reset_handler(). Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> [scottwood: Converted mvme7100 as well] Signed-off-by:
-
Andrey Smirnov authored
Call out to all restart handlers that were added via register_restart_handler() API when restarting the machine. Signed-off-by:
-
Andrey Smirnov authored
Factor out a small bit of common code in machine_restart(), machine_power_off() and machine_halt(). Signed-off-by:
-
Andrey Smirnov authored
Halt callback in struct machdep_calls is declared with __noreturn attribute, so omitting that attribute in gpio_halt_cb()'s signatrue results in compilation error. Change the signature to address the problem as well as change the code of the function to avoid ever returning from the function. Signed-off-by:
-
Andrey Smirnov authored
Select PHYLIB only if NETDEVICES is enabled and MDIO_BITBANG only if PHYLIB is present to avoid warnings from Kconfig. To prevent undefined references during linking register MDIO driver only if CONFIG_MDIO_BITBANG is enabled. Signed-off-by:
-
Andrey Smirnov authored
PHYLIB depends on NETDEVICES, so to avoid unmet dependencies warning from Kconfig it needs to be selected conditionally. Also add checks if PHYLIB is built-in to avoid undefined references to PHYLIB's symbols. Signed-off-by:
-
Christophe Leroy authored
Signed-off-by:
-
Zhao Qiang authored
modify get_qe_base function with of_address_to_resource instead of of_get_property and of_translate_address. Signed-off-by:
Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by:
-
Vaishali Thakkar authored
Use the function resource_size instead of explicit computation. Problem found using Coccinelle. Signed-off-by:
Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by:
-
- 22 Sep, 2016 15 commits
-
-
Rui Teng authored
The same logic appears twice and should probably be pulled out into a function. Suggested-by:
Rui Teng <rui.teng@linux.vnet.ibm.com> [mpe: Rename to tm_flush_hash_page() and move comment into the function] Signed-off-by:
-
Andrew Donnellan authored
Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Christophe Leroy authored
CLR_TOP32() is defined as blank. Last useful instance of CLR_TOP32() was removed by commit 40ef8cbc ("powerpc: Get 64-bit configs to compile with ARCH=powerpc") in 2005. Signed-off-by:
-
Christophe Leroy authored
On some CPUs like the 8xx, _PAGE_RW hence _PAGE_WRITE is defined as 0 and _PAGE_RO has to be set when a page is not writable _PAGE_RO is defined by default in pte-common.h, however BOOK3S/64 doesn't include that file so _PAGE_RO has to be defined explicitly in book3s/64/pgtable.h Fixes: a7b9f671 ("powerpc32: adds handling of _PAGE_RO") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Russell Currey authored
In eeh_handle_special_event(), eeh_pe_bus_get() is called before calling eeh_report_failure() on every device under a PE. If a PE was missing a bus for some reason, the error would occur before reporting failure, even though eeh_report_failure() doesn't require a bus. Fix this by moving the bus retrieval and error check after the eeh_report_failure() calls. Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
-
Russell Currey authored
When the PE used in pnv_eeh_reset() is that of a VF, pnv_eeh_reset_vf_pe() is used. Unlike the other reset functions called in pnv_eeh_reset(), the VF reset doesn't require a bus, and if a bus was missing the function would error out before resetting the VF PE. To avoid this, reorder the VF reset function to occur before finding and checking the bus. Signed-off-by:
-
Russell Currey authored
eeh_pe_bus_get() can return NULL if a PCI bus isn't found for a given PE. Some callers don't check this, and can cause a null pointer dereference under certain circumstances. Fix this by checking NULL everywhere eeh_pe_bus_get() is called. Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
-
Nicholas Piggin authored
When we originally added the ability to split the exception vectors from the kernel (commit 1f6a93e4 ("powerpc: Make it possible to move the interrupt handlers away from the kernel" 2008-09-15)), the LOAD_HANDLER() macro used an addi instruction to compute the offset of the common handler from the kernel base address. Using addi meant the handler had to be within 32K of the kernel base address, due to the addi instruction taking a signed immediate value. That necessitated creating a trampoline for the system call handler, because system_call_common (in entry64.S) is not linked within 32K of the kernel base address. Later in commit 61e2390e ("powerpc: Make load_hander handle upto 64k offset" 2012-11-15) we changed LOAD_HANDLER to take a 64K offset, by changing it to use ori. Although system_call_common is not in head_64.S or exceptions-64s.S, it is included in head-y, which causes it to be linked early in the kernel text, so in practice it ends up below 64K. Additionally if it can't be placed below 64K the linker will fail to build with a "relocation truncated to fit" error. So remove the trampoline. Newer toolchains are able to work out that the ori in LOAD_HANDLER only takes a 16 bit offset, and so they generate a 16 bit relocation. Older toolchains (binutils 2.22 at least) are not so smart, so we have to add the @l annotation to tell the assembler to generate a 16 bit relocation. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
The 0xf80 hv_facility_unavailable trampoline branches to the 0xf60 handler. This works because they both do the same thing, but it should be fixed. Signed-off-by:
-
Russell Currey authored
On EEH events the kernel will print a dump of relevant registers. If EEH is unavailable (i.e. CONFIG_EEH is disabled, a new platform doesn't have EEH support, etc) this information isn't readily available. Add a new debugfs handler to trigger a PHB register dump, so that this information can be made available on demand. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
The only difference is now the TCE table check which doesn't need to be ifdef'ed out, it will basically do nothing on BookE (it is only useful for ancient IBM machines). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Currently we turn the MMU off after copying the image, and we make sure there is no overlap between the hash table and the target pages in that case. That doesn't work for Radix however. In that case, the page tables are scattered and we can't really enforce that the target of the image isn't overlapping one of them. So instead, let's turn the MMU off before copying the image in radix mode. Thankfully, in radix mode, even under a hypervisor, we know we don't have the same kind of RMA limitations that hash mode has. While at it, also turn the MMU off early when using hash in non-LPAR mode, that way we can get rid of the collision check completely. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
Just using the hash ops won't work anymore since radix will have NULL in there. Instead create an mmu_cleanup_all() function which will do the right thing based on the MMU mode. For Radix, for now I clear UPRT and the PTCR, effectively switching back to Radix with no partition table setup. Currently set it to NULL on BookE thought it might be a good idea to wipe the TLB there (Scott ?) Signed-off-by:
-
Benjamin Herrenschmidt authored
With Radix, it can be NULL even on !BOOKE these days so replace the ifdef with a NULL check which is cleaner anyway. Signed-off-by:
-
- 20 Sep, 2016 1 commit
-
-
Michael Ellerman authored
NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff14 ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by:
-
