- 16 Oct, 2007 40 commits
-
-
KAMEZAWA Hiroyuki authored
In migration, a new page should be cache flushed before set_pte() in some archs which have virtually-tagged cache. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrea Arcangeli authored
Swappiness isn't a safe sysctl. Setting it to 0 for example can hang a system. That's a corner case but even setting it to 10 or lower can waste enormous amounts of cpu without making much progress. We've customers who wants to use swappiness but they can't because of the current implementation (if you change it so the system stops swapping it really stops swapping and nothing works sane anymore if you really had to swap something to make progress). This patch from Kurt Garloff makes swappiness safer to use (no more huge cpu usage or hangs with low swappiness values). I think the prev_priority can also be nuked since it wastes 4 bytes per zone (that would be an incremental patch but I wait the nr_scan_[in]active to be nuked first for similar reasons). Clearly somebody at some point noticed how broken that thing was and they had to add min(priority, prev_priority) to give it some reliability, but they didn't go the last mile to nuke prev_priority too. Calculating distress only in function of not-racy priority is correct and sure more than enough without having to add randomness into the equation. Patch is tested on older kernels but it compiles and it's quite simple so... Overall I'm not very satisified by the swappiness tweak, since it doesn't rally do anything with the dirty pagecache that may be inactive. We need another kind of tweak that controls the inactive scan and tunes the can_writepage feature (not yet in mainline despite having submitted it a few times), not only the active one. That new tweak will tell the kernel how hard to scan the inactive list for pure clean pagecache (something the mainline kernel isn't capable of yet). We already have that feature working in all our enterprise kernels with the default reasonable tune, or they can't even run a readonly backup with tar without triggering huge write I/O. I think it should be available also in mainline later. Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
Kurt Garloff <garloff@suse.de> Signed-off-by:
Andrea Arcangeli <andrea@suse.de> Signed-off-by:
Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by:
-
Christoph Lameter authored
The function of GFP_LEVEL_MASK seems to be unclear. In order to clear up the mystery we get rid of it and replace GFP_LEVEL_MASK with 3 sets of GFP flags: GFP_RECLAIM_MASK Flags used to control page allocator reclaim behavior. GFP_CONSTRAINT_MASK Flags used to limit where allocations can occur. GFP_SLAB_BUG_MASK Flags that the slab allocator BUG()s on. These replace the uses of GFP_LEVEL mask in the slab allocators and in vmalloc.c. The use of the flags not included in these sets may occur as a result of a slab allocation standing in for a page allocation when constructing scatter gather lists. Extraneous flags are cleared and not passed through to the page allocator. __GFP_MOVABLE/RECLAIMABLE, __GFP_COLD and __GFP_COMP will now be ignored if passed to a slab allocator. Change the allocation of allocator meta data in SLAB and vmalloc to not pass through flags listed in GFP_CONSTRAINT_MASK. SLAB already removes the __GFP_THISNODE flag for such allocations. Generalize that to also cover vmalloc. The use of GFP_CONSTRAINT_MASK also includes __GFP_HARDWALL. The impact of allocator metadata placement on access latency to the cachelines of the object itself is minimal since metadata is only referenced on alloc and free. The attempt is still made to place the meta data optimally but we consistently allow fallback both in SLAB and vmalloc (SLUB does not need to allocate metadata like that). Allocator metadata may serve multiple in kernel users and thus should not be subject to the limitations arising from a single allocation context. [akpm@linux-foundation.org: fix fallback_alloc()] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Yasunori Goto authored
When a cpu is onlined on memory-less-node box, kernel panics due to touch NULL pointer of pgdat->kswapd. Current kswapd runs only nodes which have memory. So, calling of set_cpus_allowed() is not necessary for memory-less node. This is fix for it. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Lee Schermerhorn authored
Here's a cut at fixing up uses of the online node map in generic code. mm/shmem.c:shmem_parse_mpol() Ensure nodelist is subset of nodes with memory. Use node_states[N_HIGH_MEMORY] as default for missing nodelist for interleave policy. mm/shmem.c:shmem_fill_super() initialize policy_nodes to node_states[N_HIGH_MEMORY] mm/page-writeback.c:highmem_dirtyable_memory() sum over nodes with memory mm/page_alloc.c:zlc_setup() allowednodes - use nodes with memory. mm/page_alloc.c:default_zonelist_order() average over nodes with memory. mm/page_alloc.c:find_next_best_node() skip nodes w/o memory. N_HIGH_MEMORY state mask may not be initialized at this time, unless we want to depend on early_calculate_totalpages() [see below]. Will ZONE_MOVABLE ever be configurable? mm/page_alloc.c:find_zone_movable_pfns_for_nodes() spread kernelcore over nodes with memory. This required calling early_calculate_totalpages() unconditionally, and populating N_HIGH_MEMORY node state therein from nodes in the early_node_map[]. If we can depend on this, we can eliminate the population of N_HIGH_MEMORY mask from __build_all_zonelists() and use the N_HIGH_MEMORY mask in find_next_best_node(). mm/mempolicy.c:mpol_check_policy() Ensure nodes specified for policy are subset of nodes with memory. [akpm@linux-foundation.org: fix warnings] Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
-
Christoph Lameter authored
cpusets try to ensure that any node added to a cpuset's mems_allowed is on-line and contains memory. The assumption was that online nodes contained memory. Thus, it is possible to add memoryless nodes to a cpuset and then add tasks to this cpuset. This results in continuous series of oom-kill and apparent system hang. Change cpusets to use node_states[N_HIGH_MEMORY] [a.k.a. node_memory_map] in place of node_online_map when vetting memories. Return error if admin attempts to write a non-empty mems_allowed node mask containing only memoryless-nodes. Signed-off-by:
Bob Picco <bob.picco@hp.com> Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by:
-
Christoph Lameter authored
GFP_THISNODE checks that the zone selected is within the pgdat (node) of the first zone of a nodelist. That only works if the node has memory. A memoryless node will have its first node on another pgdat (node). GFP_THISNODE currently will return simply memory on the first pgdat. Thus it is returning memory on other nodes. GFP_THISNODE should fail if there is no local memory on a node. Add a new set of zonelists for each node that only contain the nodes that belong to the zones itself so that no fallback is possible. Then modify gfp_type to pickup the right zone based on the presence of __GFP_THISNODE. Drop the existing GFP_THISNODE checks from the page_allocators hot path. Signed-off-by:
-
Christoph Lameter authored
get_pfn_range_for_nid() is called multiple times for each node at boot time. Each time, it will warn about nodes with no memory, resulting in boot messages like: Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory Node 0 active with no memory On node 0 totalpages: 0 Node 0 active with no memory Node 0 active with no memory DMA zone: 0 pages used for memmap Node 0 active with no memory Node 0 active with no memory Normal zone: 0 pages used for memmap Node 0 active with no memory Node 0 active with no memory Movable zone: 0 pages used for memmap and so on for each memoryless node. We already have the "On node N totalpages: ..." and other related messages, so drop the "Node N active with no memory" warnings. Signed-off-by: -
Christoph Lameter authored
We need the check for a node with cpu in zone reclaim. Zone reclaim will not allow remote zone reclaim if a node has a cpu. [Lee.Schermerhorn@hp.com: Move setup of N_CPU node state mask] Signed-off-by:
-
Christoph Lameter authored
Online nodes now may have no memory. The checks and initialization must therefore be changed to no longer use the online functions. This will correctly initialize the interleave on bootup to only target nodes with memory and will make sys_move_pages return an error when a page is to be moved to a memoryless node. Similarly we will get an error if MPOL_BIND and MPOL_INTERLEAVE is used on a memoryless node. These are somewhat new semantics. So far one could specify memoryless nodes and we would maybe do the right thing and just ignore the node (or we'd do something strange like with MPOL_INTERLEAVE). If we want to allow the specification of memoryless nodes via memory policies then we need to keep checking for online nodes. Signed-off-by:
-
Christoph Lameter authored
Processors on memoryless nodes must be able to fall back to remote nodes in order to get a profiling buffer. This may lead to excessive NUMA traffic but I think we should allow this rather than failing. Signed-off-by:
-
Christoph Lameter authored
The checks for node_online in the uncached allocator are made to make sure that memory is available on these nodes. Thus switch all the checks to use N_HIGH_MEMORY and to N_ONLINE. Signed-off-by:
Jes Sorensen <jes@sgi.com> Acked-by:
-
Christoph Lameter authored
Simply switch all for_each_online_node to for_each_node_state(NORMAL_MEMORY). That way SLUB only operates on nodes with regular memory. Any allocation attempt on a memoryless node or a node with just highmem will fall whereupon SLUB will fetch memory from a nearby node (depending on how memory policies and cpuset describe fallback). Signed-off-by:
-
Christoph Lameter authored
Slab should not allocate control structures for nodes without memory. This may seem to work right now but its unreliable since not all allocations can fall back due to the use of GFP_THISNODE. Switching a few for_each_online_node's to N_NORMAL_MEMORY will allow us to only allocate for nodes that have regular memory. Signed-off-by:
-
Christoph Lameter authored
A node without memory does not need a kswapd. So use the memory map instead of the online map when starting kswapd. Signed-off-by:
-
Christoph Lameter authored
constrained_alloc() builds its own memory map for nodes with memory. We have that available in N_HIGH_MEMORY now. So simplify the code. Signed-off-by:
-
Christoph Lameter authored
MPOL_INTERLEAVE currently simply loops over all nodes. Allocations on memoryless nodes will be redirected to nodes with memory. This results in an imbalance because the neighboring nodes to memoryless nodes will get significantly more interleave hits that the rest of the nodes on the system. We can avoid this imbalance by clearing the nodes in the interleave node set that have no memory. If we use the node map of the memory nodes instead of the online nodes then we have only the nodes we want. Signed-off-by:
-
Christoph Lameter authored
It is necessary to know if nodes have memory since we have recently begun to add support for memoryless nodes. For that purpose we introduce a two new node states: N_HIGH_MEMORY and N_NORMAL_MEMORY. A node has its bit in N_HIGH_MEMORY set if it has any memory regardless of the type of mmemory. If a node has memory then it has at least one zone defined in its pgdat structure that is located in the pgdat itself. A node has its bit in N_NORMAL_MEMORY set if it has a lower zone than ZONE_HIGHMEM. This means it is possible to allocate memory that is not subject to kmap. N_HIGH_MEMORY and N_NORMAL_MEMORY can then be used in various places to insure that we do the right thing when we encounter a memoryless node. [akpm@linux-foundation.org: build fix] [Lee.Schermerhorn@hp.com: update N_HIGH_MEMORY node state for memory hotadd] [y-goto@jp.fujitsu.com: Fix memory hotplug + sparsemem build] Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Christoph Lameter authored
Why do we need to support memoryless nodes? KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote: > For fujitsu, problem is called "empty" node. > > When ACPI's SRAT table includes "possible nodes", ia64 bootstrap(acpi_numa_init) > creates nodes, which includes no memory, no cpu. > > I tried to remove empty-node in past, but that was denied. > It was because we can hot-add cpu to the empty node. > (node-hotplug triggered by cpu is not implemented now. and it will be ugly.) > > > For HP, (Lee can comment on this later), they have memory-less-node. > As far as I hear, HP's machine can have following configration. > > (example) > Node0: CPU0 memory AAA MB > Node1: CPU1 memory AAA MB > Node2: CPU2 memory AAA MB > Node3: CPU3 memory AAA MB > Node4: Memory XXX GB > > AAA is very small value (below 16MB) and will be omitted by ia64 bootstrap. > After boot, only Node 4 has valid memory (but have no cpu.) > > Maybe this is memory-interleave by firmware config. Christoph Lameter <clameter@sgi.com> wrote: > Future SGI platforms (actually also current one can have but nothing like > that is deployed to my knowledge) have nodes with only cpus. Current SGI > platforms have nodes with just I/O that we so far cannot manage in the > core. So the arch code maps them to the nearest memory node. Lee Schermerhorn <Lee.Schermerhorn@hp.com> wrote: > For the HP platforms, we can configure each cell with from 0% to 100% > "cell local memory". When we configure with <100% CLM, the "missing > percentages" are interleaved by hardware on a cache-line granularity to > improve bandwidth at the expense of latency for numa-challenged > applications [and OSes, but not our problem ;-)]. When we boot Linux on > such a config, all of the real nodes have no memory--it all resides in a > single interleaved pseudo-node. > > When we boot Linux on a 100% CLM configuration [== NUMA], we still have > the interleaved pseudo-node. It contains a few hundred MB stolen from > the real nodes to contain the DMA zone. [Interleaved memory resides at > phys addr 0]. The memoryless-nodes patches, along with the zoneorder > patches, support this config as well. > > Also, when we boot a NUMA config with the "mem=" command line, > specifying less memory than actually exists, Linux takes the excluded > memory "off the top" rather than distributing it across the nodes. This > can result in memoryless nodes, as well. > This patch: Preparation for memoryless node patches. Provide a generic way to keep nodemasks describing various characteristics of NUMA nodes. Remove the node_online_map and the node_possible map and realize the same functionality using two nodes stats: N_POSSIBLE and N_ONLINE. [Lee.Schermerhorn@hp.com: Initialize N_*_MEMORY and N_CPU masks for non-NUMA config] Signed-off-by:
-
Nick Piggin authored
prepare/commit_write no longer returns AOP_TRUNCATED_PAGE since OCFS2 and GFS2 were converted to the new aops, so we can make some simplifications for that. [michal.k.k.piotrowski@gmail.com: fix warning] Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Nick Piggin authored
Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is now implemented in a way that does not create blocks in sparse regions, which is a silly thing for it to have been doing (isn't it?) ext2 survives fsx and fsstress. jfs is converted as well... ext3 should be easy to do (but not done yet). [akpm@linux-foundation.org: coding-style fixes] Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
-
Nick Piggin authored
Plug ocfs2 into the ->write_begin and ->write_end aops. A bunch of custom code is now gone - the iovec iteration stuff during write and the ocfs2 splice write actor. Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by:
-
Nick Piggin authored
Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Nick Piggin authored
Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
Convert udf to new aops. Also seem to have fixed pagecache corruption in udf_adinicb_commit_write -- page was marked uptodate when it is not. Also, fixed the silly setup where prepare_write was doing a kmap to be used in commit_write: just do kmap_atomic in write_end. Use libfs helpers to make this easier. Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
This also gets rid of a lot of useless read_file stuff. And also optimises the full page write case by marking a !uptodate page uptodate. Signed-off-by:
-
Nick Piggin authored
[mszeredi] - don't send zero length write requests - it is not legal for the filesystem to return with zero written bytes Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Nick Piggin authored
[akpm@linux-foundation.org: fix against git-nfs] [peterz@infradead.org: fix against git-nfs] Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
Vladimir Saveliev authored
This patch makes reiserfs to use AOP_FLAG_CONT_EXPAND in order to get rid of the special generic_cont_expand routine Signed-off-by:
Vladimir Saveliev <vs@namesys.com> Signed-off-by:
-
Vladimir Saveliev authored
Convert reiserfs to new aops Signed-off-by:
-
Vladimir Saveliev authored
Make reiserfs to write via generic routines. Original reiserfs write optimized for big writes is deadlock rone Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
Anders Larsen <al@alarsen.net> Signed-off-by:
-
Nick Piggin authored
Signed-off-by:
-
