All vector drivers now allow a BPF program to be loaded and
associated with the RX socket in the host kernel.

1. The program can be loaded as an extra kernel command line
option to any of the vector drivers.

2. The program can also be loaded as "firmware", using the
ethtool flash option. It is possible to turn this facility
on or off using a command line option.

A simplistic wrapper for generating the BPF firmware for the raw
socket driver out of a tcpdump/libpcap filter expression can be
found at: https://github.com/kot-begemot-uk/uml_vector_utilities/Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>

This driver *can* be a module, but then its parameters (socket path)
are untrusted data from inside the VM, and that isn't allowed. Allow
the code to only be built-in to avoid that.

Fixes: 5d38f324 ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>

When we get an interrupt from the socket getting readable,
and start reading, there's a possibility for a race. This
depends on the implementation of the device, but e.g. with
qemu's libvhost-user, we can see:

 device                 virtio_uml
---------------------------------------
  write header
                         get interrupt
                         read header
                         read body -> returns -EAGAIN
  write body

The -EAGAIN return is because the socket is non-blocking,
and then this leads us to abandon this message.

In fact, we've already read the header, so when the get
another signal/interrupt for the body, we again read it
as though it's a new message header, and also abandon it
for the same reason (wrong size etc.)

This essentially breaks things, and if that message was
one that required a response, it leads to a deadlock as
the device is waiting for the response but we'll never
reply.

Fix this by spinning on -EAGAIN as well when we read the
message body. We need to handle -EAGAIN as "no message"
while reading the header, since we share an interrupt.

Note that this situation is highly unlikely to occur in
normal usage, since there will be very few messages and
only in the startup phase. With the inband call feature
this does tend to happen (eventually) though.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

If the connection drops, just remove the device, we don't try
to recover from this right now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

In the main() code, we eventually enable signals just before
exec() or exit(), in order to to not have signals pending and
delivered *after* the exec().

I've observed SIGSEGV loops at this point, and the reason seems
to be the irqflags tracing; this makes sense as the kernel is
no longer really functional at this point. Since there's really
no reason to use unblock_signals_trace() here (I had just done
a global search & replace), use the plain unblock_signals() in
this case to avoid going into the no longer functional kernel.

Fixes: 0dafcbe1 ("um: Implement TRACE_IRQFLAGS_SUPPORT")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Pull dmaengine fixes from Vinod Koul:
 "A few fixes to the dmaengine drivers:

   - fix in sprd driver for link list and potential memory leak

   - tegra transfer failure fix

   - imx size check fix for script_number

   - xilinx fix for 64bit AXIDMA and control reg update

   - qcom bam dma resource leak fix

   - cppi slave transfer fix when idle"

* tag 'dmaengine-fix-5.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle
  dmaengine: qcom: bam_dma: Fix resource leak
  dmaengine: sprd: Fix the possible memory leak issue
  dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
  dmaengine: xilinx_dma: Fix 64-bit simple AXIDMA transfer
  dmaengine: imx-sdma: fix size check for sdma script_number
  dmaengine: tegra210-adma: fix transfer failure
  dmaengine: sprd: Fix the link-list pointer register configuration issue

Pull iommu fixes from Joerg Roedel:

 - Follow-on fix for Renesas IPMMU to get rid of a redundant error
   message.

 - Quirk for AMD IOMMU to make it work on another Acer Laptop model with
   a broken IVRS ACPI table.

 - Fix for a panic at kdump in the Intel IOMMU driver.

* tag 'iommu-fixes-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix panic after kexec -p for kdump
  iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41
  iommu/ipmmu-vmsa: Remove dev_err() on platform_get_irq() failure

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix remounting (broken in -rc1)."

* tag 'gfs2-v5.4-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix initialisation of args for remount

When gfs2 was converted to use fs_context, the initialisation of the
mount args structure to the currently active args was lost with the
removal of gfs2_remount_fs(), so the checks of the new args on remount
became checks against the default values instead of the current ones.
This caused unexpected remount behaviour and test failures (xfstests
generic/294, generic/306 and generic/452).

Reinstate the args initialisation, this time in gfs2_init_fs_context()
and conditional upon fc->purpose, as that's the only time we get control
before the mount args are parsed in the remount process.

Fixes: 1f52aa08 ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

This cures a panic on restart after a kexec operation on 5.3 and 5.4
kernels.

The underlying state of the iommu registers (iommu->flags &
VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as
"DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping().

[   43.654737] BUG: kernel NULL pointer dereference, address:
0000000000000056
[   43.655720] #PF: supervisor read access in kernel mode
[   43.655720] #PF: error_code(0x0000) - not-present page
[   43.655720] PGD 0 P4D 0
[   43.655720] Oops: 0000 [#1] SMP PTI
[   43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.3.2-1940.el8uek.x86_64 #1
[   43.655720] Hardware name: Oracle Corporation ORACLE SERVER
X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018
[   43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0
[   43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff
74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0
01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b
[   43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246
[   43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX:
fffffffffffffffd
[   43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI:
ffff8880477460b0
[   43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09:
ffff888047c01700
[   43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12:
0000000000000000
[   43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15:
ffff888072d2b558
[   43.655720] FS:  0000000000000000(0000) GS:ffff888071c00000(0000)
knlGS:0000000000000000
[   43.655720] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4:
00000000001606b0
[   43.655720] Call Trace:
[   43.655720]  ? intel_alloc_coherent+0x2a/0x180
[   43.655720]  ? __schedule+0x2c2/0x650
[   43.655720]  dma_alloc_attrs+0x8c/0xd0
[   43.655720]  dma_pool_alloc+0xdf/0x200
[   43.655720]  ehci_qh_alloc+0x58/0x130
[   43.655720]  ehci_setup+0x287/0x7ba
[   43.655720]  ? _dev_info+0x6c/0x83
[   43.655720]  ehci_pci_setup+0x91/0x436
[   43.655720]  usb_add_hcd.cold.48+0x1d4/0x754
[   43.655720]  usb_hcd_pci_probe+0x2bc/0x3f0
[   43.655720]  ehci_pci_probe+0x39/0x40
[   43.655720]  local_pci_probe+0x47/0x80
[   43.655720]  pci_device_probe+0xff/0x1b0
[   43.655720]  really_probe+0xf5/0x3a0
[   43.655720]  driver_probe_device+0xbb/0x100
[   43.655720]  device_driver_attach+0x58/0x60
[   43.655720]  __driver_attach+0x8f/0x150
[   43.655720]  ? device_driver_attach+0x60/0x60
[   43.655720]  bus_for_each_dev+0x74/0xb0
[   43.655720]  driver_attach+0x1e/0x20
[   43.655720]  bus_add_driver+0x151/0x1f0
[   43.655720]  ? ehci_hcd_init+0xb2/0xb2
[   43.655720]  ? do_early_param+0x95/0x95
[   43.655720]  driver_register+0x70/0xc0
[   43.655720]  ? ehci_hcd_init+0xb2/0xb2
[   43.655720]  __pci_register_driver+0x57/0x60
[   43.655720]  ehci_pci_init+0x6a/0x6c
[   43.655720]  do_one_initcall+0x4a/0x1fa
[   43.655720]  ? do_early_param+0x95/0x95
[   43.655720]  kernel_init_freeable+0x1bd/0x262
[   43.655720]  ? rest_init+0xb0/0xb0
[   43.655720]  kernel_init+0xe/0x110
[   43.655720]  ret_from_fork+0x24/0x50

Fixes: 8af46c78 ("iommu/vt-d: Implement is_attach_deferred iommu ops entry")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495.  Add the new entry for that.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull fuse fixes from Miklos Szeredi:
 "Mostly virtiofs fixes, but also fixes a regression and couple of
  longstanding data/metadata writeback ordering issues"

* tag 'fuse-fixes-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: redundant get_fuse_inode() calls in fuse_writepages_fill()
  fuse: Add changelog entries for protocols 7.1 - 7.8
  fuse: truncate pending writes on O_TRUNC
  fuse: flush dirty data/metadata before non-truncate setattr
  virtiofs: Remove set but not used variable 'fc'
  virtiofs: Retry request submission from worker context
  virtiofs: Count pending forgets as in_flight forgets
  virtiofs: Set FR_SENT flag only after request has been sent
  virtiofs: No need to check fpq->connected state
  virtiofs: Do not end request in submission context
  fuse: don't advise readdirplus for negative lookup
  fuse: don't dereference req->args on finished request
  virtio-fs: don't show mount options
  virtio-fs: Change module name to virtiofs.ko

Pull ARC fixes from Vineet Gupta:
 "Small fixes for ARC:

   - perf fix for Big Endian build [Alexey]

   - hadk platform enable soem peripherals [Eugeniy]"

* tag 'arc-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: Accommodate big-endian CPU
  ARC: [plat-hsdk]: Enable on-boardi SPI ADC IC
  ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC

Pull HID fixes from Jiri Kosina:

 - HID++ device support regression fixes (race condition during cleanup,
   device detection fix, opps fix) from Andrey Smirnov

 - disable PM on i2c-hid, as it's causing problems with a lot of
   devices; other OSes apparently don't implement/enable it either; from
   Kai-Heng Feng

 - error handling fix in intel-ish driver, from Zhang Lixu

 - syzbot fuzzer fix for HID core code from Alan Stern

 - a few other tiny fixups (printk message cleanup, new device ID)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: i2c-hid: add Trekstor Primebook C11B to descriptor override
  HID: logitech-hidpp: do all FF cleanup in hidpp_ff_destroy()
  HID: logitech-hidpp: rework device validation
  HID: logitech-hidpp: split g920_get_config()
  HID: i2c-hid: Remove runtime power management
  HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()
  HID: google: add magnemite/masterball USB ids
  HID: Fix assumption that devices have inputs
  HID: prodikeys: make array keys static const, makes object smaller
  HID: fix error message in hid_open_report()

Pull virtio fixes from Michael Tsirkin:
 "Some minor fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vringh: fix copy direction of vringh_iov_push_kern()
  vsock/virtio: remove unused 'work' field from 'struct virtio_vsock_pkt'
  virtio_ring: fix stalls for packed rings

We want to copy from iov to buf, so the direction was wrong.

Note: no real user for the helper, but it will be used by future
features.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The 'work' field was introduced with commit 06a8fc78
("VSOCK: Introduce virtio_vsock_common.ko")
but it is never used in the code, so we can remove it to save
memory allocated in the per-packet 'struct virtio_vsock_pkt'
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When VIRTIO_F_RING_EVENT_IDX is negotiated, virtio devices can
use virtqueue_enable_cb_delayed_packed to reduce the number of device
interrupts.  At the moment, this is the case for virtio-net when the
napi_tx module parameter is set to false.

In this case, the virtio driver selects an event offset and expects that
the device will send a notification when rolling over the event offset
in the ring.  However, if this roll-over happens before the event
suppression structure update, the notification won't be sent. To address
this race condition the driver needs to check wether the device rolled
over the offset after updating the event suppression structure.

With VIRTIO_F_RING_PACKED, the virtio driver did this by reading the
flags field of the descriptor at the specified offset.

Unfortunately, checking at the event offset isn't reliable: if
descriptors are chained (e.g. when INDIRECT is off) not all descriptors
are overwritten by the device, so it's possible that the device skipped
the specific descriptor driver is checking when writing out used
descriptors. If this happens, the driver won't detect the race condition
and will incorrectly expect the device to send a notification.

For virtio-net, the result will be a TX queue stall, with the
transmission getting blocked forever.

With the packed ring, it isn't easy to find a location which is
guaranteed to change upon the roll-over, except the next device
descriptor, as described in the spec:

        Writes of device and driver descriptors can generally be
        reordered, but each side (driver and device) are only required to
        poll (or test) a single location in memory: the next device descriptor after
        the one they processed previously, in circular order.

while this might be sub-optimal, let's do exactly this for now.

Cc: stable@vger.kernel.org
Cc: Jason Wang <jasowang@redhat.com>
Fixes: f51f9826 ("virtio_ring: leverage event idx in packed ring")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the VMWare guest support:

   - Unbreak VMWare platform detection which got wreckaged by converting
     an integer constant to a string constant.

   - Fix the clang build of the VMWAre hypercall by explicitely
     specifying the ouput register for INL instead of using the short
     form"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
  x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(keeping):

   - Add a missing include to prevent compiler warnings.

   - Make the VDSO implementation of clock_getres() POSIX compliant
     again. A recent change dropped the NULL pointer guard which is
     required as NULL is a valid pointer value for this function.

   - Fix two function documentation typos"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Fix two trivial comments
  timers/sched_clock: Include local timekeeping.h for missing declarations
  lib/vdso: Make clock_getres() POSIX compliant again

Pull perf fixes from Thomas Gleixner:
 "A set of perf fixes:

  kernel:

   - Unbreak the tracking of auxiliary buffer allocations which got
     imbalanced causing recource limit failures.

   - Fix the fallout of splitting of ToPA entries which missed to shift
     the base entry PA correctly.

   - Use the correct context to lookup the AUX event when unmapping the
     associated AUX buffer so the event can be stopped and the buffer
     reference dropped.

  tools:

   - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
     /proc/kcore

   - Fix freeing id arrays in the event list so the correct event is
     closed.

   - Sync sched.h anc kvm.h headers with the kernel sources.

   - Link jvmti against tools/lib/ctype.o to have weak strlcpy().

   - Fix multiple memory and file descriptor leaks, found by coverity in
     perf annotate.

   - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
     by a static analysis tool"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Fix AUX output stopping
  perf/aux: Fix tracking of auxiliary trace buffer allocation
  perf/x86/intel/pt: Fix base for single entry topa
  perf kmem: Fix memory leak in compact_gfp_flags()
  tools headers UAPI: Sync sched.h with the kernel
  tools headers kvm: Sync kvm.h headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  perf c2c: Fix memory leak in build_cl_output()
  perf tools: Fix mode setting in copyfile_mode_ns()
  perf annotate: Fix multiple memory and file descriptor leaks
  perf tools: Fix resource leak of closedir() on the error paths
  perf evlist: Fix fix for freed id arrays
  perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()

Pull irq fixes from Thomas Gleixner:
 "Two fixes for interrupt controller drivers:

   - Skip IRQ_M_EXT entries in the device tree when initializing the
     RISCV PLIC controller to avoid a double init attempt.

   - Use the correct ITS list when issuing the VMOVP synchronization
     command so the operation works only on the ITS instances which are
     associated to a VM"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Skip contexts except supervisor in plic_init()
  irqchip/gic-v3-its: Use the exact ITSList for VMOVP

Pull cifs fixes from Steve French:
 "Seven cifs/smb3 fixes, including three for stable"

* tag '5.4-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
  CIFS: Fix use after free of file info structures
  CIFS: Fix retry mid list corruption on reconnects
  cifs: Fix missed free operations
  CIFS: avoid using MID 0xFFFF
  cifs: clarify comment about timestamp granularity for old servers
  cifs: Handle -EINPROGRESS only when noblockcnt is set

Pull RISC-V fixes from Paul Walmsley:
 "Several minor fixes and cleanups for v5.4-rc5:

   - Three build fixes for various SPARSEMEM-related kernel
     configurations

   - Two cleanup patches for the kernel bug and breakpoint trap handler
     code"

* tag 'riscv/for-v5.4-rc5-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: cleanup do_trap_break
  riscv: cleanup <asm/bug.h>
  riscv: Fix undefined reference to vmemmap_populate_basepages
  riscv: Fix implicit declaration of 'page_to_section'
  riscv: fix fs/proc/kcore.c compilation with sparsemem enabled

Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes:

   - Fix VDSO time-related function behavior for systems where we need
     to fall back to syscalls, but were instead returning bogus results.

   - A fix to TLB exception handlers for Cavium Octeon systems where
     they would inadvertently clobber the $1/$at register.

   - A build fix for bcm63xx configurations.

   - Switch to using my @kernel.org email address"

* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: tlbex: Fix build_restore_pagemask KScratch restore
  MIPS: bmips: mark exception vectors as char arrays
  mips: vdso: Fix __arch_get_hw_counter()
  MAINTAINERS: Use @kernel.org address for Paul Burton

Pull tty/serial driver fix from Greg KH:
 "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a
  reported issue.

  It has been in linux-next for a while with no problems"

* tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  8250-men-mcb: fix error checking when get_num_ports returns -ENODEV

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix, for the wlan-ng driver, that
  resolves a reported issue.

  It is been in linux-next for a while with no reported issues"

* tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

Pull driver core fix from Greg KH:
 "Here is a single sysfs fix for 5.4-rc5.

  It resolves an error if you actually try to use the __BIN_ATTR_WO()
  macro, seems I never tested it properly before :(

  This has been in linux-next for a while with no reported issues"

* tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Fixes __BIN_ATTR_WO() macro

Pull binder fix from Greg KH:
 "This is a single binder fix to resolve a reported issue by Jann. It's
  been in linux-next for a while with no reported issues"

* tag 'char-misc-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: Don't modify VMA bounds in ->mmap handler

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.4-rc5.

  More "fun" with some of the misc USB drivers as found by syzbot, and
  there are a number of other small bugfixes in here for reported
  issues.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role()
  USB: ldusb: fix read info leaks
  USB: serial: ti_usb_3410_5052: clean up serial data access
  USB: serial: ti_usb_3410_5052: fix port-close races
  USB: usblp: fix use-after-free on disconnect
  usb: udc: lpc32xx: fix bad bit shift operation
  usb: cdns3: Fix dequeue implementation.
  USB: legousbtower: fix a signedness bug in tower_probe()
  USB: legousbtower: fix memleak on disconnect
  USB: ldusb: fix memleak on disconnect

Pull i2c fixes from Wolfram Sang:
 "A few driver fixes for the I2C subsystem"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: remove warning when compiling with W=1
  i2c: stm32f7: fix a race in slave mode with arbitration loss irq
  i2c: stm32f7: fix first byte to send in slave mode
  i2c: mt65xx: fix NULL ptr dereference
  i2c: aspeed: fix master pending state handling

Pull block and io_uring fixes from Jens Axboe:
 "A bit bigger than usual at this point in time, mostly due to some good
  bug hunting work by Pavel that resulted in three io_uring fixes from
  him and two from me. Anyway, this pull request contains:

   - Revert of the submit-and-wait optimization for io_uring, it can't
     always be done safely. It depends on commands always making
     progress on their own, which isn't necessarily the case outside of
     strict file IO. (me)

   - Series of two patches from me and three from Pavel, fixing issues
     with shared data and sequencing for io_uring.

   - Lastly, two timeout sequence fixes for io_uring (zhangyi)

   - Two nbd patches fixing races (Josef)

   - libahci regulator_get_optional() fix (Mark)"

* tag 'for-linus-2019-10-26' of git://git.kernel.dk/linux-block:
  nbd: verify socket is supported during setup
  ata: libahci_platform: Fix regulator_get_optional() misuse
  nbd: handle racing with error'ed out commands
  nbd: protect cmd->status with cmd->lock
  io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
  io_uring: used cached copies of sq->dropped and cq->overflow
  io_uring: Fix race for sqes with userspace
  io_uring: Fix broken links with offloading
  io_uring: Fix corrupted user_data
  io_uring: correct timeout req sequence when inserting a new entry
  io_uring : correct timeout req sequence when waiting timeout
  io_uring: revert "io_uring: optimize submit_and_wait API"

Pull s390 fixes from Vasily Gorbik:

 - Add R_390_GLOB_DAT relocation type support. This fixes boot problem
   on linux-next.

 - Fix memory leak in zcrypt

* tag 's390-5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kaslr: add support for R_390_GLOB_DAT relocation type
  s390/zcrypt: fix memleak at release

Pull xen fixlet from Juergen Gross:
 "Just one patch for issuing a deprecation warning for 32-bit Xen pv
  guests"

* tag 'for-linus-5.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: issue deprecation warning for 32-bit pv guest

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a regression in the intel-iommu get_required_mask conversion
  (Arvind Sankar)"

* tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping:
  iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU

Pull dax fix from Dan Williams:
 "Fix a performance regression that followed from a fix to the
  conversion of the fsdax implementation to the xarray. v5.3 users
  report that they stop seeing huge page mappings on an application +
  filesystem layout that was seeing huge pages previously on v5.2"

* tag 'dax-fix-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  fs/dax: Fix pmd vs pte conflict detection

Pull SCSI fixes from James Bottomley:
 "Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch,
  53c710[x2], target) and one core change that tries to close a race
  between sysfs delete and module removal"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: remove left-over BUILD_NVME defines
  scsi: core: try to get module before removing device
  scsi: hpsa: add missing hunks in reset-patch
  scsi: target: core: Do not overwrite CDB byte 1
  scsi: ch: Make it possible to open a ch device multiple times again
  scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE
  scsi: sni_53c710: fix compilation error
  scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions
  scsi: qla2xxx: fix a potential NULL pointer dereference