Simplify 'xhci_try_enable_msi()' and reduce unnecessary function calls.

xHCI driver first tries to allocate 'num_online_cpu()' number of MSI-X
vectors, if that fails it falls back to a single MSI vector. There is no
good reason for this, we currently only support a primary interrupter.
However, we are still interested in knowing if there are more vectors
available, which will be utilized once we get secondary interrupter
support.

Call 'pci_alloc_irq_vectors()' once (with MSI-X and MSI flag), instead
of separately for MSI-X and MSI. And accept any number of MSI-X or MSI
vectors between 1 and 'num_online_cpu()'.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-17-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of variable 'msix_count' containing the number of MSI-X vectors,
now it can contains MSI or MSI-X vector amount. Because both interrupt
methods allow several vectors. Thus, 'msix_count' is renamed to 'nvecs'.

Additionally, instead of storing the maximum possible vector amount,
now it stores the amount of successfully allocated vectors, or negative
integer on allocation failure.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-16-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current way the xhci driver sets up MSI interrupts is overly complex
and messy. The whole MSI setup can be done in one simple function.

Continue refactoring MSI/MSI-X setup by incorporating 'xhci_setup_msi()'
into 'xhci_try_enable_msi()'. Now all interrupt enabling is contained in
one function, which should make it easier to rework.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-15-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current way the xhci driver sets up MSI/MSI-X interrupts is overly
complex and messy. The whole MSI/MSI-X setup can be done in one simple
function.

Start refactoring this by incorporating 'xhci_setup_msix()' into
'xhci_try_enable_msi()'. 'xhci_setup_msix()' is a static function which
is only called by 'xhci_try_enable_msi()'.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-14-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current xHCI driver only supports one "interrupter", meaning we will
only use one MSI/MSI-X interrupt line. Thus, add handler only to the
first interrupt line.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-13-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the error check "No MSI-X/MSI found and no IRQ in BIOS" inside
'goto legacy'. It is better to check if the IRQ interrupt is available,
before trying to add a handler. Additionally the aforementioned error
message is much more clear.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-12-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't inherit headers "by chances" from asm/bug.h, asm/io.h,
etc... Include the needed headers explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-11-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is preferred to use sizeof(*pointer) instead of sizeof(type).
The type of the variable can change and one needs not change
the former (unlike the latter). No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-10-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of doing custom calculations, use sizeof_field() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-9-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the custom return value with proper Linux error code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-8-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kstrtox() along with regmap API can return different error codes
based on the circumstances. Don't shadow them when returning to
the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-7-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usual pattern is to check for errors and then continue if none.
Apply that pattern to xhci_dbc_stop() code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-6-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Embrace ATTRIBUTE_GROUPS() to avoid boiler plate code.
This should not introduce any functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-5-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-4-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's standard approach to parse values from user space by using
sysfs_streq(). Make driver use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-3-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma_free_coherent() is NULL-aware, not necessary to check for
the parameter twice. Drop duplicate conditionals in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231201150647.1307406-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Cypress CY7C6563x is a 2/4-port USB 2.0 hub. Add support for
this hub in the driver in order to bring up reset, supply or clock
dependencies.

There is no reset pulse width given in the datasheet so we expect
a minimal value of 1us to be enough. This hasn't been tested though
due to lack of hardware which has the reset connected to a GPIO.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20231127112234.109073-3-frieder@fris.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most onboard USB hubs have a dedicated crystal oscillator but on some
boards the clock signal for the hub is provided by the SoC.

In order to support this, we add the possibility of specifying a
clock in the devicetree that gets enabled/disabled when the hub
is powered up/down.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20231127112234.109073-2-frieder@fris.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of printing the decimal error codes, let's use the more
human-readable symbolic error names provided by the %pe printk
format specifier.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20231127112234.109073-1-frieder@fris.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the USB/PHY/Thunderbolt fixes in here as well for later patches
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull tracing fixes from Steven Rostedt::
 "Eventfs fixes:

   - With the usage of simple_recursive_remove() recommended by Al Viro,
     the code should not be calling "d_invalidate()" itself. Doing so is
     causing crashes. The code was calling d_invalidate() on the race of
     trying to look up a file while the parent was being deleted. This
     was detected, and the added dentry was having d_invalidate() called
     on it, but the deletion of the directory was also calling
     d_invalidate() on that same dentry.

   - A fix to not free the eventfs_inode (ei) until the last dput() was
     called on its ei->dentry made the ei->dentry exist even after it
     was marked for free by setting the ei->is_freed. But code elsewhere
     still was checking if ei->dentry was NULL if ei->is_freed is set
     and would trigger WARN_ON if that was the case. That's no longer
     true and there should not be any warnings when it is true.

   - Use GFP_NOFS for allocations done under eventfs_mutex. The
     eventfs_mutex can be taken on file system reclaim, make sure that
     allocations done under that mutex do not trigger file system
     reclaim.

   - Clean up code by moving the taking of inode_lock out of the helper
     functions and into where they are needed, and not use the parameter
     to know to take it or not. It must always be held but some callers
     of the helper function have it taken when they were called.

   - Warn if the inode_lock is not held in the helper functions.

   - Warn if eventfs_start_creating() is called without a parent. As
     eventfs is underneath tracefs, all files created will have a parent
     (the top one will have a tracefs parent).

  Tracing update:

   - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"

* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
  eventfs: Make sure that parent->d_inode is locked in creating files/dirs
  eventfs: Do not allow NULL parent to eventfs_start_creating()
  eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
  eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
  eventfs: Do not invalidate dentry in create_file/dir_dentry()
  eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL

Pull parisc architecture fixes from Helge Deller:
 "This patchset fixes and enforces correct section alignments for the
  ex_table, altinstructions, parisc_unwind, jump_table and bug_table
  which are created by inline assembly.

  Due to not being correctly aligned at link & load time they can
  trigger unnecessarily the kernel unaligned exception handler at
  runtime. While at it, I switched the bug table to use relative
  addresses which reduces the size of the table by half on 64-bit.

  We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
  from HP-UX, which now trigger build-issues with glibc. We can simply
  remove them.

  Most of the patches are tagged for stable kernel series.

  Summary:

   - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
     build issues

   - Fix section alignments for ex_table, altinstructions, parisc unwind
     table, jump_table and bug_table

   - Reduce size of bug_table on 64-bit kernel by using relative
     pointers"

* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Reduce size of the bug_table on 64-bit kernel by half
  parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
  parisc: Use natural CPU alignment for bug_table
  parisc: Ensure 32-bit alignment on parisc unwind section
  parisc: Mark lock_aligned variables 16-byte aligned on SMP
  parisc: Mark jump_table naturally aligned
  parisc: Mark altinstructions read-only and 32-bit aligned
  parisc: Mark ex_table entries 32-bit aligned in uaccess.h
  parisc: Mark ex_table entries 32-bit aligned in assembly.h

Pull x86 microcode fixes from Ingo Molnar:
 "Fix/enhance x86 microcode version reporting: fix the bootup log spam,
  and remove the driver version announcement to avoid version confusion
  when distros backport fixes"

* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Rework early revisions reporting
  x86/microcode: Remove the driver announcement and version

Pull x86 perf event fix from Ingo Molnar:
 "Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
  code resulting in non-working events on those platforms"

* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities

Pull locking fix from Ingo Molnar:
 "Fix lockdep block chain corruption resulting in KASAN warnings"

* tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix block chain corruption

Pull smb client fixes from Steve French:

 - use after free fix in releasing multichannel interfaces

 - fixes for special file types (report char, block, FIFOs properly when
   created e.g. by NFS to Windows)

 - fixes for reporting various special file types and symlinks properly
   when using SMB1

* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: introduce cifs_sfu_make_node()
  smb: client: set correct file type from NFS reparse points
  smb: client: introduce ->parse_reparse_point()
  smb: client: implement ->query_reparse_point() for SMB1
  cifs: fix use after free for iface while disabling secondary channels

Pull USB / PHY / Thunderbolt fixes from Greg KH:
 "Here are a number of reverts, fixes, and new device ids for 6.7-rc3
  for the USB, PHY, and Thunderbolt driver subsystems. Include in here
  are:

   - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
     have been merged yet, the author is reworking them based on review
     comments as they were using older apis that shouldn't be used
     anymore for newer drivers

   - small thunderbolt driver fixes for reported issues

   - USB driver fixes for a variety of small issues in dwc3, typec,
     xhci, and other smaller drivers.

   - new device ids for usb-serial and onboard_usb_hub drivers.

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  USB: serial: option: add Luat Air72*U series products
  USB: dwc3: qcom: fix ACPI platform device leak
  USB: dwc3: qcom: fix software node leak on probe errors
  USB: dwc3: qcom: fix resource leaks on probe deferral
  USB: dwc3: qcom: simplify wakeup interrupt setup
  USB: dwc3: qcom: fix wakeup after probe deferral
  dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
  usb: misc: onboard-hub: add support for Microchip USB5744
  dt-bindings: usb: microchip,usb5744: Add second supply
  usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
  USB: serial: option: add Fibocom L7xx modules
  USB: xhci-plat: fix legacy PHY double init
  usb: typec: tipd: Supply also I2C driver data
  usb: xhci-mtk: fix in-ep's start-split check failure
  usb: dwc3: set the dma max_seg_size
  usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
  usb: dwc3: add missing of_node_put and platform_device_put
  USB: dwc2: write HCINT with INTMASK applied
  usb: misc: ljca: Drop _ADR support to get ljca children devices
  usb: cdnsp: Fix deadlock issue during using NCM gadget
  ...

Pull xfs fix from Chandan Babu:

 - Validate quota records recovered from the log before writing them to
   the disk.

* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: dquot recovery does not validate the recovered dquot
  xfs: clean up dqblk extraction

Pull arm64 fixes from Catalin Marinas:

 - Fix "rodata=on" not disabling "rodata=full" on arm64

 - Add arm64 make dependency between vmlinuz.efi and Image, leading to
   occasional build failures previously (with parallel building)

 - Add newline to the output formatting of the za-fork kselftest

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: add dependency between vmlinuz.efi and Image
  kselftest/arm64: Fix output formatting for za-fork
  arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y

Pull xen fixes from Juergen Gross:

 - A small cleanup patch for the Xen privcmd driver

 - A fix for the swiotlb-xen driver which was missing the advertising of
   the maximum mapping length

 - A fix for Xen on Arm for a longstanding bug, which happened to occur
   only recently: a structure in percpu memory crossed a page boundary,
   which was rejected by the hypervisor

* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: fix xen_vcpu_info allocation alignment
  xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
  swiotlb-xen: provide the "max_mapping_size" method

Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>

Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.

They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.

There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org

Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

Make sure the .PARISC.unwind section will be 32-bit aligned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+