This patch replaces an open coded check if the TX ring is full by a check if
mcp251xfd_get_tx_free() returns 0.

Link: https://lore.kernel.org/r/20210114153448.1506901-2-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The sizeof(u32) is hardcoded. It's better to use the config value from the
regmap.

It increases the size of target object, but it's flexible when new mcp chip
need other val_bytes.

Link: https://lore.kernel.org/r/20210122081334.213957-1-suyanjun218@gmail.comSigned-off-by: Su Yanjun <suyanjun218@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This change fixes the checkpatch warning described in this commit commit
cbacb5ab ("docs: printk-formats: Stop encouraging use of unnecessary
%h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless so do
not encourage the use of %hh[xudi] or %h[xudi].

Link: https://lore.kernel.org/r/20210124150916.1920434-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In commit 652562e5 ("can: length: can_fd_len2dlc(): simplify length
calculcation") the readability of the code degraded and became more error
prone. To counteract this, partially convert that patch and replace open coded
values (of the original code) with proper defines.

Fixes: 652562e5 ("can: length: can_fd_len2dlc(): simplify length calculcation")
Cc: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210118201346.79422-1-socketcan@hartkopp.netSigned-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The can_get_state_str() function is also relevant to the drivers. Export the
symbol and make it visible in the can/dev.h header.

Link: https://lore.kernel.org/r/20210119170355.12040-1-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch fixes two typos found by codespell.

Fixes: 812f0116 ("can: flexcan: add CAN wakeup function for i.MX8QM")
Link: https://lore.kernel.org/r/20210127085529.2768537-2-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch fixes a typo found by codespell.

Fixes: 94c23097 ("can: gw: support modification of Classical CAN DLCs")
Link: https://lore.kernel.org/r/20210127085529.2768537-3-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Emil Renner Berthing says:

====================
net: usbnet: convert to new tasklet API

This converts the usbnet driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")

It is split into two commits for ease of reviewing.
====================

Link: https://lore.kernel.org/r/20210123173221.5855-1-esmil@mailme.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Initialize tasklet using tasklet_init() rather than open-coding it.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rasmus Villemoes says:

====================
net: dsa: mv88e6xxx: remove some 6250-specific methods

v2:
 - resend now that the bug-fix patch (87fe0436, "net: dsa:
   mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnext") is in
   net and also merged to net-next.
 - include various tags in patch 1.
 - add second similar patch for loadpurge.
====================

Link: https://lore.kernel.org/r/20210125150449.115032-1-rasmus.villemoes@prevas.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Apart from the mask used to get the high bits of the fid,
mv88e6185_g1_vtu_loadpurge() and mv88e6250_g1_vtu_loadpurge() are
identical. Since the entry->fid passed in should never exceed the
number of databases, we can simply use the former as-is as replacement
for the latter.
Suggested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mv88e6250_g1_vtu_getnext is almost identical to
mv88e6185_g1_vtu_getnext, except for the 6250 only having 64 databases
instead of 256. We can reduce code duplication by simply masking off
the extra two garbage bits when assembling the fid from VTU op [3:0]
and [11:8].
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add selftests for kernel behavior with regard to various classes of
unallocated/reserved IPv4 addresses, checking whether or not these
addresses can be assigned as unicast addresses on links and used in
routing.

Expect the current kernel behavior at the time of this patch. That is:

* 0/8 and 240/4 may be used as unicast, with the exceptions of 0.0.0.0
  and 255.255.255.255;
* the lowest address in a subnet may only be used as a broadcast address;
* 127/8 may not be used as unicast (the route_localnet option, which is
  disabled by default, still leaves it treated slightly specially);
* 224/4 may not be used as unicast.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210126040834.GR24989@frotz.zork.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When TLS is a module, the built-in bonding driver may cause a
link error:

x86_64-linux-ld: drivers/net/bonding/bond_main.o: in function `bond_start_xmit':
bond_main.c:(.text+0xc451): undefined reference to `tls_validate_xmit_skb'

Add a dependency to avoid the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210125113209.2248522-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the various netif_level() helpers to simplify the C code.  This was
suggested by Joe Perches.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1611642024-3166-1-git-send-email-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Every line of code should start with tab (8 characters)
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210123051102.1091541-1-mudongliangabcd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the messed up indentation in br_multicast_eht_set_entry_lookup().

Fixes: baa74d39 ("net: bridge: multicast: add EHT source set handling functions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210125082040.13022-1-razor@blackwall.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

change 'regster' to 'register'
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Link: https://lore.kernel.org/r/20210123082550.3748-1-samirweng1979@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

change 'paquet' to 'packet'
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Link: https://lore.kernel.org/r/20210123074835.9448-1-samirweng1979@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says:

====================
bnxt_en: Error recovery improvements.

This series contains a number of improvements in the area of error
recovery.  Most error recovery scenarios are tightly coordinated with
the firmware.  A number of patches add retry logic to establish
connection with the firmware if there are indications that the
firmware is still alive and will likely transition back to the
normal state.  Some patches speed up the recovery process and make
it more reliable.  There are some cleanup patches as well.
====================

Link: https://lore.kernel.org/r/1611558501-11022-1-git-send-email-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Once the firmware fatal condition is detected, we should cease
comminication with the firmware and hardware quickly even if there
are many completion entries in the completion rings.  This will
speed up the recovery process and prevent further I/Os that may
cause further exceptions.

Do not proceed in the NAPI poll function if fatal condition is
detected.  Call napi_complete() and return without arming interrupts.
Cleanup of all rings and reset are imminent.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Combine the three netdev_warn() calls into a single call, printed at
the NETIF_MSG_HW log level.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the event of a fatal firmware error, firmware will notify the host
and then it will proceed to do core reset when it sees that all functions
have disabled Bus Master.  To prevent Master Aborts and other hard
errors, we need to quiesce all activities in addition to disabling Bus
Master before the chip goes into core reset.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the event of a fatal firmware error, we want to disable IRQ early
in the recovery sequence.  This change will allow it to be called
safely again as part of the normal shutdown sequence.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Up until now, we don't need to keep track of this state because NAPI
is always enabled once and disabled once during bring up and shutdown.
For better error recovery in subsequent patches, we want to quiesce
the device earlier during fatal error conditions.  The normal shutdown
sequence will disable NAPI again and the flag will prevent disabling
NAPI twice.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This code to check if we have reached the maximum wait time after
firmware reset is used multiple times.  Add a helper function to
do this.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Firmware may be in the middle of reset when the driver tries to do ifup.
In that case, firmware will return a special error code and the driver
will retry 10 times with 50 msecs delay after each retry.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Drawing a hard line on aborted resets prevents a NIC open in
some scenarios that may otherwise be recoverable. For example,
if a firmware recovery happened while a PF was down and an
attempt was made to bring up an associated VF in this state,
then it was impossible to ever bring up this VF without a
rebind or reload of its driver.

Attempt to reinitialize the firmware when an aborted reset (or
failed init after a reset) is discovered during open - it may
succeed. Also take care to allow the user to retry opening the
NIC even after an aborted reset.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Firmware is capable of generating asynchronous debug notifications.
The event data is opaque to the driver and is simply logged. Debug
notifications can be enabled by turning on hardware status messages
using the ethtool msglvl interface.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The timeout period for firmware messages is passed to the driver
from the firmware in the response of the first command.  This
timeout period is multiplied by a factor for certain long
running commands such as NVRAM commands.  In some cases, the
timeout period can become really long and it can cause hung task
warnings if firmware has crashed or is not responding.  To avoid
such long delays, cap all firmware commands to a max timeout value
of 40 seconds.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If firmware is in reset or in bad state, it won't be able to return
VPD data.  Move bnxt_vpd_read_info() until after bnxt_fw_init_one_p1()
successfully returns.  By then we would have established proper
communications with the firmware.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The first HWRM_VER_GET message to firmware during probe may timeout if
firmware is under reset.  This can happen during hot-plug for example.
On P5 and newer chips, we can check if firmware is in the boot stage by
reading a status register.  Retry 5 times if the status register shows
that firmware is not ready and not in error state.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing support for handling NO_MASTER crashes while ports are
administratively down (ifdown). On some SoC platforms, the driver
needs to assist the firmware to recover from a crash via OP-TEE.
This is performed in a similar fashion to what is done during driver
probe.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Define macros to check for the various states in the lower 16 bits of
the health register.  Replace the C code that checks for these values
with the newly defined macros.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Updates to backing store APIs, QoS profiles, and push buffer initial
index support.

Since the new HWRM_FUNC_BACKING_STORE_CFG message size has increased,
we need to add some compat. logic to fall back to the smaller legacy
size if firmware cannot accept the larger message size.  The new fields
added to the structure are not used yet.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

DENG Qingfang says:

====================
dsa: add MT7530 GPIO support

MT7530's LED controller can be used as GPIO controller.
Add support for it.
====================

Link: https://lore.kernel.org/r/20210125044322.6280-1-dqfext@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MT7530's LED controller can drive up to 15 LED/GPIOs.

Add support for GPIO control and allow users to use its GPIOs by
setting gpio-controller property in device tree.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add device tree binding to support MT7530 GPIO controller.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MT762x HW, except for MT7628, supports frame length up to 2048
(maximum length on GDM), so allow setting MTU up to 2030.

Also set the default frame length to the hardware default 1518.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210125042046.5599-1-dqfext@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>