- 13 Feb, 2017 28 commits
-
-
Chris Wilson authored
In addition to just testing the fw table we load, during the initial mock testing we can test that all tables are valid (so the testing is not limited to just the platforms that load that particular table). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170213171558.20942-23-chris@chris-wilson.co.uk
-
Chris Wilson authored
Now that the kselftest infrastructure exists, put it to use and add to it the existing consistency checks on the fw register lookup tables. v2: s/tabke/table/ Signed-off-by:
-
Chris Wilson authored
Write into an object using WB, WC, GTT, and GPU paths and make sure that our internal API is sufficient to ensure coherent reads and writes. v2: Avoid invalid free upon allocation error Signed-off-by:
-
Chris Wilson authored
An unlikely error condition that we can simulate by stealing most of the range before trying to insert new objects. Signed-off-by:
-
Chris Wilson authored
Create partial mappings to cover a large object, investigating tiling (fenced regions) and VMA reuse. Signed-off-by:
-
Chris Wilson authored
Starting with a placeholder test just to reassure that we can create a test object, Signed-off-by:
-
Chris Wilson authored
The phys object is a rarely used device (only very old machines require a chunk of physically contiguous pages for a few hardware interactions). As such, it is not exercised by CI and to combat that we want to add a test that exercises the phys object on all platforms. v2: Always set err on error paths and not rely on inheriting the err. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170213171558.20942-17-chris@chris-wilson.co.uk
-
Chris Wilson authored
Primarily to emphasize the difference between just advancing the breadcrumb using a bare request and the overhead of dispatching an execbuffer. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170213171558.20942-16-chris@chris-wilson.co.uk
-
Chris Wilson authored
A request on one engine with a dependency on a request on another engine must wait for completion of the first request before starting. Signed-off-by:
-
Chris Wilson authored
Use a recursive-batch to busy spin on each to ensure that each is being run simultaneously. Signed-off-by:
-
Chris Wilson authored
Just create several batches of requests and expect it to not fall over! Signed-off-by:
-
Chris Wilson authored
Do a quick selftest on in the interoperability of dma_fence_wait on a i915_gem_request. Signed-off-by:
-
Chris Wilson authored
A trivial kselftest to submit a request and wait upon it. Signed-off-by:
-
Chris Wilson authored
Simple starting point for adding seltests for i915_gem_request, first mock a device (with engines and contexts) that allows us to construct and execute a request, along with waiting for the request to complete. Signed-off-by:
-
Chris Wilson authored
We would like to be able to exercise huge allocations even on memory constrained devices. To do this we create an object that allocates only a few pages and remaps them across its whole range - each page is reused multiple times. We can therefore pretend we are rendering into a much larger object. Signed-off-by:
-
Chris Wilson authored
Create a fake engine that runs requests using a timer to simulate hw. v2: Prevent leaks of ctx->name along error paths Signed-off-by:
-
Chris Wilson authored
A very simple mockery, just a random manager and timeline. Useful for inserting objects and ordering retirement; and not much else. v2: mock_fini_ggtt() to complement mock_init_ggtt(). Signed-off-by:
-
Chris Wilson authored
A simulacrum of drm_i915_private to let us pretend interactions with the device. v2: Tidy init error paths Signed-off-by:
-
Chris Wilson authored
Third retroactive test, make sure that the seqno waiters are woken. v2: Smattering of comments, rearrange code v3: Fix IDLE assert to avoid startup/sleep races Signed-off-by:
-
Chris Wilson authored
Second retroactive test, make sure that the waiters are removed from the global wait-tree when their seqno completes. Signed-off-by:
-
Chris Wilson authored
First retroactive test, make sure that the waiters are in global seqno order after random inserts and removals. Signed-off-by:
-
Chris Wilson authored
Start exercising the scattergather lists, especially looking at iteration after coalescing. v2: Comment on the peculiarity of table construction (i.e. why this sg_table might be interesting). v3: Added one __func__ to identify expect_pfn_sg() v4: Loop until we have crossed the chain boundary (forcing sg_table to do multiple allocations) before squelching a potential ENOMEM from oom. Signed-off-by:
-
Chris Wilson authored
Some pieces of code are independent of hardware but are very tricky to exercise through the normal userspace ABI or via debugfs hooks. Being able to create mock unit tests and execute them through CI is vital. Start by adding a central point where we can execute unit tests and a parameter to enable them. This is disabled by default as the expectation is that these tests will occasionally explode. To facilitate integration with igt, any parameter beginning with i915.igt__ is interpreted as a subtest executable independently via igt/drv_selftest. Two classes of selftests are recognised: mock unit tests and integration tests. Mock unit tests are run as soon as the module is loaded, before the device is probed. At that point there is no driver instantiated and all hw interactions must be "mocked". This is very useful for writing universal tests to exercise code not typically run on a broad range of architectures. Alternatively, you can hook into the live selftests and run when the device has been instantiated - hw interactions are real. v2: Add a macro for compiling conditional code for mock objects inside real objects. v3: Differentiate between mock unit tests and late integration test. v4: List the tests in natural order, use igt to sort after modparam. v5: s/late/live/ v6: s/unsigned long/unsigned int/ v7: Use igt_ prefixes for long helpers. v8: Deobfuscate macros overriding functions, stop using -I$(src) Signed-off-by:
-
Chris Wilson authored
Following a hang and reset, we know that the engine is idle and all context state has been saved or lost. Consequently, we know that the engine is no longer referencing the last context and we can relinquish our tracking. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
The signal threads may be running concurrently with the GPU reset. The completion from the GPU run asynchronous with the reset and two threads may see different snapshots of the state, and the signaler may mark a request as complete as we try to reset it. We don't tolerate 2 different views of the same state and complain if we try to mark a request as failed if it is already complete. Disable the signal threads during reset to prevent this conflict (even though the conflict implies that the state we resetting to is invalid, we have already made our decision!). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99733 References: https://bugs.freedesktop.org/show_bug.cgi?id=99671Signed-off-by:
-
Chris Wilson authored
Disabling the tasklet leaves it if scheduled on the ready to run list until it is re-enabled. This will leave the ksoftird thread spinning until satisfied. To prevent this situation on starting the GPU reset, we want to kill the tasklet first and then disable. The same problem will arise when a tasklet is scheduled from another device, so a better solution is required for the general case. Reported-by:
-
Chris Wilson authored
As i915_gem_reset_finish() undoes the steps from i915_gem_reset_prepare() to leave the system in a fully-working state, e.g. to be able to free the breadcrumb signal threads, make sure that we always call it even on the error path. Signed-off-by:
-
Chris Wilson authored
As the request is not complete, it should not be signaled. Assert that this is true before we process the request for a reset. References: https://bugs.freedesktop.org/show_bug.cgi?id=99671Signed-off-by:
-
- 10 Feb, 2017 12 commits
-
-
Chris Wilson authored
After a brief discussion, we settled on a naming convention for the conditional GEM debugging data that should be clearer to the casual user: GEM_DEBUG Signed-off-by:
-
Chris Wilson authored
When updating the bookkeeping following the reset, we need the seqno to be coherent on the CPU prior to trusting its result for deciding whether any request is completed. We need the irq_barrier before we start making these decisions, i.e. in reset_prepare. References: https://bugs.freedesktop.org/show_bug.cgi?id=99733Signed-off-by:
Michel Thierry <michel.thierry@intel.com>
-
Chris Wilson authored
As dmabufs may live beyond the PCI device removal, we need to flush the freed object worker on device release, and include a warning in case there is a leak. Signed-off-by:
-
Chris Wilson authored
We may unload the PCI device before all users (such as dma-buf) are completely shutdown. This may leave VMA in the global GTT which we want to revoke, whilst keeping the objects themselves around to service the dma-buf. Signed-off-by:
-
Chris Wilson authored
We may need to keep our memory management alive after we have unloaded the physical pci device. For example, if we have exported an object via dmabuf, that will keep the device around but the pci device may be removed before the dmabuf itself is released, use of the pci hardware will be revoked, but the memory and object management needs to persist for the dmabuf. Signed-off-by:
-
Lyude authored
This adds a file in i915's debugfs directory that allows userspace to manually control HPD storm detection. This is mainly for hotplugging tests, where we might want to test HPD storm functionality or disable storm detection to speed up hotplugging tests without breaking anything. Changes since v1: - Make HPD storm interval configurable - Misc code cleanup Signed-off-by:
Lyude <lyude@redhat.com> Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
-
Ville Syrjälä authored
Replace the VLV/CHV check with a HAS_GMCH_DISPLAY check in intel_fb_pitch_limit(), because it's shorter. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170208175328.11064-1-ville.syrjala@linux.intel.comReviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com>
-
Ville Syrjälä authored
Until recently vlv_steal_power_sequencer() wasn't being called for normal DP ports, and hence it could assert that it should only be called for pipe A and B (since pipe C doesn't support eDP). However that changed when we started to consider normal DP ports as well when choosing a PPS. So we will now get spurious warnings when vlv_steal_power_sequencer() does get called for pipe C. Avoid this by moving the WARN down into vlv_detach_power_sequencer() where this assertion should still hold. Cc: Imre Deak <imre.deak@intel.com> Cc: stable@vger.kernel.org Fixes: 9f2bdb00 ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV") References: https://bugs.freedesktop.org/show_bug.cgi?id=95287Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Daniel Vetter authored
Chris Wilson needs the new drm_driver->release callback to make sure the shiny new dma-buf testcases don't oops the driver on unload. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Chris Wilson authored
[12493.693827] WARNING: CPU: 1 PID: 14860 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x5d/0x80 [i915] [12493.693868] Unclaimed read from register 0x1f0024 [12493.693905] Modules linked in: vgem i915 drm_kms_helper drm intel_gtt i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers intel_powerclamp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd lpc_ich i2c_i801 mfd_core video i2c_designware_platform i2c_designware_core i2c_core button autofs4 sd_mod ahci libahci libata scsi_mod [last unloaded: i915] [12493.694039] CPU: 1 PID: 14860 Comm: intel-gpu-overl Tainted: G U 4.10.0-rc7+ #11 [12493.694079] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016 [12493.694121] Call Trace: [12493.694169] dump_stack+0x67/0x9d [12493.694235] __warn+0x117/0x140 [12493.694288] warn_slowpath_fmt+0x4f/0x60 [12493.694344] ? do_raw_spin_lock+0x116/0x180 [12493.694533] ? check_for_unclaimed_mmio+0x98/0xe0 [i915] [12493.694727] __unclaimed_reg_debug+0x5d/0x80 [i915] [12493.694923] fwtable_read32+0x2c5/0x330 [i915] [12493.695108] i915_interrupt_info+0xd52/0xf80 [i915] [12493.695302] ? gen6_write16+0x310/0x310 [i915] [12493.695357] seq_read+0x187/0x710 [12493.695412] full_proxy_read+0x75/0xc0 [12493.695472] __vfs_read+0x5a/0x220 [12493.695524] ? kmem_cache_free+0x6c/0x260 [12493.695577] ? putname+0x97/0xa0 [12493.695629] ? putname+0x97/0xa0 [12493.695682] ? rcu_read_lock_sched_held+0xb8/0xd0 [12493.695735] ? rw_verify_area+0x65/0x140 [12493.695787] vfs_read+0xd1/0x1f0 [12493.695840] SyS_read+0x62/0xc0 [12493.695893] entry_SYSCALL_64_fastpath+0x1c/0xb1 [12493.695943] RIP: 0033:0x7f82dca99ba0 [12493.695985] RSP: 002b:00007ffc0bdfd4f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [12493.696031] RAX: ffffffffffffffda RBX: 00007ffc0be005a0 RCX: 00007f82dca99ba0 [12493.696073] RDX: 0000000000001fff RSI: 00007ffc0bdfd500 RDI: 000000000000001a [12493.696115] RBP: ffffffff810fb639 R08: 302f6972642f6775 R09: 00007f82dca0999a [12493.696157] R10: 00007f82dcd62760 R11: 0000000000000246 R12: ffff880069a17f98 [12493.696199] R13: 00007ffc0bdfd428 R14: 0000000000000003 R15: 00007ffc0bdfd428 [12493.696250] ? trace_hardirqs_off_caller+0xd9/0x130 [12493.696300] ---[ end trace 52ccf4d39793cc59 ]--- Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99761Signed-off-by:
-
Chris Wilson authored
Now that we have fast top-down insertion into the drm_mm, we can use it for frequent runtime operations like insertion of the context object, whereas before we limited it to the one-off insertion of the pinned kernel context. Keeping the active context objects out of the mappable region of the global GTT (except under memory pressure) improves our ability to allocate mappable aperture region without triggering a GPU stall. Signed-off-by:
-
Ander Conselvan de Oliveira authored
The function intel_ddi_get_link_dpll() was added in f169660e ("drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT") to "allow for the implementation of a platform neutral upfront link training function", but such implementation never landed. So remove that function and clean up the exported shared DPLL interface. Fixes: f169660e ("drm/i915/dp: Add a standalone function to obtain shared dpll for HSW/BDW/SKL/BXT") Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484310032-1863-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
