- 30 Apr, 2021 40 commits
-
-
Jens Axboe authored
For reads, use the better variant of checking for the need to call filemap_write_and_wait_range() when doing O_DIRECT. This avoids falling back to the slow path for IOCB_NOWAIT, if there are no pages to wait for (or write out). Link: https://lkml.kernel.org/r/20210224164455.1096727-4-axboe@kernel.dkSigned-off-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jens Axboe authored
For the generic page cache read helper, use the better variant of checking for the need to call filemap_write_and_wait_range() when doing O_DIRECT reads. This avoids falling back to the slow path for IOCB_NOWAIT, if there are no pages to wait for (or write out). Link: https://lkml.kernel.org/r/20210224164455.1096727-3-axboe@kernel.dkSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
-
Jens Axboe authored
Patch series "Improve IOCB_NOWAIT O_DIRECT reads", v3. An internal workload complained because it was using too much CPU, and when I took a look, we had a lot of io_uring workers going to town. For an async buffered read like workload, I am normally expecting _zero_ offloads to a worker thread, but this one had tons of them. I'd drop caches and things would look good again, but then a minute later we'd regress back to using workers. Turns out that every minute something was reading parts of the device, which would add page cache for that inode. I put patches like these in for our kernel, and the problem was solved. Don't -EAGAIN IOCB_NOWAIT dio reads just because we have page cache entries for the given range. This causes unnecessary work from the callers side, when the IO could have been issued totally fine without blocking on writeback when there is none. This patch (of 3): For O_DIRECT reads/writes, we check if we need to issue a call to filemap_write_and_wait_range() to issue and/or wait for writeback for any page in the given range. The existing mechanism just checks for a page in the range, which is suboptimal for IOCB_NOWAIT as we'll fallback to the slow path (and needing retry) if there's just a clean page cache page in the range. Provide filemap_range_needs_writeback() which tries a little harder to check if we actually need to issue and/or wait for writeback in the range. Link: https://lkml.kernel.org/r/20210224164455.1096727-1-axboe@kernel.dk Link: https://lkml.kernel.org/r/20210224164455.1096727-2-axboe@kernel.dkSigned-off-by:
-
Anshuman Khandual authored
early_memtest() does not get called from all architectures. Hence enabling CONFIG_MEMTEST and providing a valid memtest=[1..N] kernel command line option might not trigger the memory pattern tests as would be expected in normal circumstances. This situation is misleading. The change here prevents the above mentioned problem after introducing a new config option ARCH_USE_MEMTEST that should be subscribed on platforms that call early_memtest(), in order to enable the config CONFIG_MEMTEST. Conversely CONFIG_MEMTEST cannot be enabled on platforms where it would not be tested anyway. Link: https://lkml.kernel.org/r/1617269193-22294-1-git-send-email-anshuman.khandual@arm.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> (arm64) Reviewed-by:
Max Filippov <jcmvbkbc@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Sergei Trofimovich authored
When page_poison detects page corruption it's useful to see who freed a page recently to have a guess where write-after-free corruption happens. After this change corruption report has extra page data. Example report from real corruption (includes only page_pwner part): pagealloc: memory corruption e00000014cd61d10: 11 00 00 00 00 00 00 00 30 1d d2 ff ff 0f 00 60 ........0......` e00000014cd61d20: b0 1d d2 ff ff 0f 00 60 90 fe 1c 00 08 00 00 20 .......`....... ... CPU: 1 PID: 220402 Comm: cc1plus Not tainted 5.12.0-rc5-00107-g9720c6f59ecf #245 Hardware name: hp server rx3600, BIOS 04.03 04/08/2008 ... Call Trace: [<a000000100015210>] show_stack+0x90/0xc0 [<a000000101163390>] dump_stack+0x150/0x1c0 [<a0000001003f1e90>] __kernel_unpoison_pages+0x410/0x440 [<a0000001003c2460>] get_page_from_freelist+0x1460/0x2ca0 [<a0000001003c6be0>] __alloc_pages_nodemask+0x3c0/0x660 [<a0000001003ed690>] alloc_pages_vma+0xb0/0x500 [<a00000010037deb0>] __handle_mm_fault+0x1230/0x1fe0 [<a00000010037ef70>] handle_mm_fault+0x310/0x4e0 [<a00000010005dc70>] ia64_do_page_fault+0x1f0/0xb80 [<a00000010000ca00>] ia64_leave_kernel+0x0/0x270 page_owner tracks the page as freed page allocated via order 0, migratetype Movable, gfp_mask 0x100dca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), pid 37, ts 8173444098740 __reset_page_owner+0x40/0x200 free_pcp_prepare+0x4d0/0x600 free_unref_page+0x20/0x1c0 __put_page+0x110/0x1a0 migrate_pages+0x16d0/0x1dc0 compact_zone+0xfc0/0x1aa0 proactive_compact_node+0xd0/0x1e0 kcompactd+0x550/0x600 kthread+0x2c0/0x2e0 call_payload+0x50/0x80 Here we can see that page was freed by page migration but something managed to write to it afterwards. [slyfox@gentoo.org: s/dump_page_owner/dump_page/, per Vlastimil] Link: https://lkml.kernel.org/r/20210407230800.1086854-1-slyfox@gentoo.org Link: https://lkml.kernel.org/r/20210404141735.2152984-1-slyfox@gentoo.orgSigned-off-by:Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Sergei Trofimovich authored
Before the change page_owner recursion was detected via fetching backtrace and inspecting it for current instruction pointer. It has a few problems: - it is slightly slow as it requires extra backtrace and a linear stack scan of the result - it is too late to check if backtrace fetching required memory allocation itself (ia64's unwinder requires it). To simplify recursion tracking let's use page_owner recursion flag in 'struct task_struct'. The change make page_owner=on work on ia64 by avoiding infinite recursion in: kmalloc() -> __set_page_owner() -> save_stack() -> unwind() [ia64-specific] -> build_script() -> kmalloc() -> __set_page_owner() [we short-circuit here] -> save_stack() -> unwind() [recursion] Link: https://lkml.kernel.org/r/20210402115342.1463781-1-slyfox@gentoo.orgSigned-off-by:
-
Sergei Trofimovich authored
I tried to use page_owner=1 for a while noticed too late it had no effect as opposed to similar init_on_alloc=1 (these work). Let's make them consistent. The change decreses binary size slightly: text data bss dec hex filename 12408 321 17 12746 31ca mm/page_owner.o.before 12320 321 17 12658 3172 mm/page_owner.o.after Link: https://lkml.kernel.org/r/20210401210909.3532086-1-slyfox@gentoo.orgSigned-off-by:
-
Sergei Trofimovich authored
Very minor optimization. Link: https://lkml.kernel.org/r/20210401212445.3534721-1-slyfox@gentoo.orgSigned-off-by:
-
zhongjiang-ali authored
Since commit 5556cfe8 ("mm, page_owner: fix off-by-one error in __set_page_owner_handle()") introduced, the parameter 'page' will not used, hence it need to be removed. Link: https://lkml.kernel.org/r/1616602022-43545-1-git-send-email-zhongjiang-ali@linux.alibaba.comSigned-off-by:
zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Signed-off-by:
-
Georgi Djakov authored
Collect the time when each allocation is freed, to help with memory analysis with kdump/ramdump. Add the timestamp also in the page_owner debugfs file and print it in dump_page(). Having another timestamp when we free the page helps for debugging page migration issues. For example both alloc and free timestamps being the same can gave hints that there is an issue with migrating memory, as opposed to a page just being dropped during migration. Link: https://lkml.kernel.org/r/20210203175905.12267-1-georgi.djakov@linaro.orgSigned-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Acked-by:
-
Bhaskar Chowdhury authored
s/interruptable/interruptible/ Link: https://lkml.kernel.org/r/20210319214140.23304-1-unixbhaskar@gmail.comSigned-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Bhaskar Chowdhury authored
s/operatios/operations/ s/Mininum/Minimum/ s/mininum/minimum/ ......two different places. Link: https://lkml.kernel.org/r/20210325044940.14516-1-unixbhaskar@gmail.comSigned-off-by:
-
Vlastimil Babka authored
Commit ca0cab65 ("mm, slub: introduce static key for slub_debug()") introduced a static key to optimize the case where no debugging is enabled for any cache. The static key is enabled when slub_debug boot parameter is passed, or CONFIG_SLUB_DEBUG_ON enabled. However, some caches might be created with one or more debugging flags explicitly passed to kmem_cache_create(), and the commit missed this. Thus the debugging functionality would not be actually performed for these caches unless the static key gets enabled by boot param or config. This patch fixes it by checking for debugging flags passed to kmem_cache_create() and enabling the static key accordingly. Note such explicit debugging flags should not be used outside of debugging and testing as they will now enable the static key globally. btrfs_init_cachep() creates a cache with SLAB_RED_ZONE but that's a mistake that's being corrected [1]. rcu_torture_stats() creates a cache with SLAB_STORE_USER, but that is a testing module so it's OK and will start working as intended after this patch. Also note that in case of backports to kernels before v5.12 that don't have 59450bbc ("mm, slab, slub: stop taking cpu hotplug lock"), static_branch_enable_cpuslocked() should be used. [1] https://lore.kernel.org/linux-btrfs/20210315141824.26099-1-dsterba@suse.com/ Link: https://lkml.kernel.org/r/20210315153415.24404-1-vbabka@suse.cz Fixes: ca0cab65 ("mm, slub: introduce static key for slub_debug()") Signed-off-by:
Oliver Glitta <glittao@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by:
-
Rafael Aquini authored
This is a minor addition to the allocator setup options to provide a simple way to on demand enable back cache merging for builds that by default run with CONFIG_SLAB_MERGE_DEFAULT not set. Link: https://lkml.kernel.org/r/20210319194506.200159-1-aquini@redhat.comSigned-off-by:
Rafael Aquini <aquini@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Petr Mladek authored
Commit d6ad3e28 ("softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume") introduced touch_softlockup_watchdog_sync(). It solved a problem when the watchdog was touched in an atomic context, the timer callback was proceed right after releasing interrupts, and the local clock has not been updated yet. In this case, sched_clock_tick() was called in watchdog_timer_fn() before updating the timer. So far so good. Later commit 5d1c0f4a ("watchdog: add check for suspended vm in softlockup detector") added two kvm_check_and_clear_guest_paused() calls. They touch the watchdog when the guest has been sleeping. The code makes my head spin around. Scenario 1: + guest did sleep: + PVCLOCK_GUEST_STOPPED is set + 1st watchdog_timer_fn() invocation: + the watchdog is not touched yet + is_softlockup() returns too big delay + kvm_check_and_clear_guest_paused(): + clear PVCLOCK_GUEST_STOPPED + call touch_softlockup_watchdog_sync() + set SOFTLOCKUP_DELAY_REPORT + set softlockup_touch_sync + return from the timer callback + 2nd watchdog_timer_fn() invocation: + call sched_clock_tick() even though it is not needed. The timer callback was invoked again only because the clock has already been updated in the meantime. + call kvm_check_and_clear_guest_paused() that does nothing because PVCLOCK_GUEST_STOPPED has been cleared already. + call update_report_ts() and return. This is fine. Except that sched_clock_tick() might allow to set it already during the 1st invocation. Scenario 2: + guest did sleep + 1st watchdog_timer_fn() invocation + same as in 1st scenario + guest did sleep again: + set PVCLOCK_GUEST_STOPPED again + 2nd watchdog_timer_fn() invocation + SOFTLOCKUP_DELAY_REPORT is set from 1st invocation + call sched_clock_tick() + call kvm_check_and_clear_guest_paused() + clear PVCLOCK_GUEST_STOPPED + call touch_softlockup_watchdog_sync() + set SOFTLOCKUP_DELAY_REPORT + set softlockup_touch_sync + call update_report_ts() (set real timestamp immediately) + return from the timer callback + 3rd watchdog_timer_fn() invocation + timestamp is set from 2nd invocation + softlockup_touch_sync is set but not checked because the real timestamp is already set Make the code more straightforward: 1. Always call kvm_check_and_clear_guest_paused() at the very beginning to handle PVCLOCK_GUEST_STOPPED. It touches the watchdog when the quest did sleep. 2. Handle the situation when the watchdog has been touched (SOFTLOCKUP_DELAY_REPORT is set). Call sched_clock_tick() when touch_*sync() variant was used. It makes sure that the timestamp will be up to date even when it has been touched in atomic context or quest did sleep. As a result, kvm_check_and_clear_guest_paused() is called on a single location. And the right timestamp is always set when returning from the timer callback. Link: https://lkml.kernel.org/r/20210311122130.6788-7-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
-
Petr Mladek authored
Any parallel softlockup reports are skipped when one CPU is already printing backtraces from all CPUs. The exclusive rights are synchronized using one bit in soft_lockup_nmi_warn. There is also one memory barrier that does not make much sense. Use two barriers on the right location to prevent mixing two reports. [pmladek@suse.com: use bit lock operations to prevent multiple soft-lockup reports] Link: https://lkml.kernel.org/r/YFSVsLGVWMXTvlbk@alley Link: https://lkml.kernel.org/r/20210311122130.6788-6-pmladek@suse.comSigned-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
-
Petr Mladek authored
The softlockup detector does some gymnastic with the variable soft_watchdog_warn. It was added by the commit 58687acb ("lockup_detector: Combine nmi_watchdog and softlockup detector"). The purpose is not completely clear. There are the following clues. They describe the situation how it looked after the above mentioned commit: 1. The variable was checked with a comment "only warn once". 2. The variable was set when softlockup was reported. It was cleared only when the CPU was not longer in the softlockup state. 3. watchdog_touch_ts was not explicitly updated when the softlockup was reported. Without this variable, the report would normally be printed again during every following watchdog_timer_fn() invocation. The logic has got even more tangled up by the commit ed235875 ("kernel/watchdog.c: print traces for all cpus on lockup detection"). After this commit, soft_watchdog_warn is set only when softlockup_all_cpu_backtrace is enabled. But multiple reports from all CPUs are prevented by a new variable soft_lockup_nmi_warn. Conclusion: The variable probably never worked as intended. In each case, it has not worked last many years because the softlockup was reported repeatedly after the full period defined by watchdog_thresh. The reason is that watchdog gets touched in many known slow paths, for example, in printk_stack_address(). This code is called also when printing the softlockup report. It means that the watchdog timestamp gets updated after each report. Solution: Simply remove the logic. People want the periodic report anyway. Link: https://lkml.kernel.org/r/20210311122130.6788-5-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
The softlockup detector currently shows the time spent since the last report. As a result it is not clear whether a CPU is infinitely hogged by a single task or if it is a repeated event. The situation can be simulated with a simply busy loop: while (true) cpu_relax(); The softlockup detector produces: [ 168.277520] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865] [ 196.277604] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865] [ 236.277522] watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [cat:4865] But it should be, something like: [ 480.372418] watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [cat:4943] [ 508.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 52s! [cat:4943] [ 548.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 89s! [cat:4943] [ 576.372351] watchdog: BUG: soft lockup - CPU#2 stuck for 115s! [cat:4943] For the better output, add an additional timestamp of the last report. Only this timestamp is reset when the watchdog is intentionally touched from slow code paths or when printing the report. Link: https://lkml.kernel.org/r/20210311122130.6788-4-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
The softlockup situation might stay for a long time or even forever. When it happens, the softlockup debug messages are printed in regular intervals defined by get_softlockup_thresh(). There is a mystery. The repeated message is printed after the full interval that is defined by get_softlockup_thresh(). But the timer callback is called more often as defined by sample_period. The code looks like the soflockup should get reported in every sample_period when it was once behind the thresh. It works only by chance. The watchdog is touched when printing the stall report, for example, in printk_stack_address(). Make the behavior clear and predictable by explicitly updating the timestamp in watchdog_timer_fn() when the report gets printed. Link: https://lkml.kernel.org/r/20210311122130.6788-3-pmladek@suse.comSigned-off-by:
-
Petr Mladek authored
Patch series "watchdog/softlockup: Report overall time and some cleanup", v2. I dug deep into the softlockup watchdog history when time permitted this year. And reworked the patchset that fixed timestamps and cleaned up the code[2]. I split it into very small steps and did even more code clean up. The result looks quite strightforward and I am pretty confident with the changes. [1] v2: https://lore.kernel.org/r/20201210160038.31441-1-pmladek@suse.com [2] v1: https://lore.kernel.org/r/20191024114928.15377-1-pmladek@suse.com This patch (of 6): There are many touch_*watchdog() functions. They are called in situations where the watchdog could report false positives or create unnecessary noise. For example, when CPU is entering idle mode, a virtual machine is stopped, or a lot of messages are printed in the atomic context. These functions set SOFTLOCKUP_RESET instead of a real timestamp. It allows to call them even in a context where jiffies might be outdated. For example, in an atomic context. The real timestamp is set by __touch_watchdog() that is called from the watchdog timer callback. Rename this callback to update_touch_ts(). It better describes the effect and clearly distinguish is from the other touch_*watchdog() functions. Another motivation is that two timestamps are going to be used. One will be used for the total softlockup time. The other will be used to measure time since the last report. The new function name will help to distinguish which timestamp is being updated. Link: https://lkml.kernel.org/r/20210311122130.6788-1-pmladek@suse.com Link: https://lkml.kernel.org/r/20210311122130.6788-2-pmladek@suse.comSigned-off-by:
-
Randy Dunlap authored
Fix kernel-doc notation function arguments to eliminate two kernel-doc warnings: fs_parser.c:322: warning: Excess function parameter 'name' description in 'validate_constant_table' fs_parser.c:367: warning: Function parameter or member 'name' not described in 'fs_validate_description' Link: https://lkml.kernel.org/r/20210407033743.9701-1-rdunlap@infradead.orgSigned-off-by:
-
Dan Carpenter authored
The intent with this code was to return negative error codes but instead it returns positives. The problem is how type promotion works with ternary operations. These functions return long, "ret" is an int and "copied" is a u32. The negative error code is first cast to u32 so it becomes a high positive and then cast to long where it's still a positive. We could fix this by declaring "ret" as a ssize_t but let's just get rid of the ternaries instead. Link: https://lkml.kernel.org/r/YIE+/cK1tBzSuQPU@mwanda Fixes: 5bf2b193 ("kfifo: add example files to the kernel sample directory") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
Jiapeng Chong authored
Fix the following clang warning: fs/ocfs2/dlm/dlmrecovery.c:129:20: warning: unused function 'dlm_reset_recovery' [-Wunused-function]. Link: https://lkml.kernel.org/r/1618382761-5784-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/cluter/cluster/ Link: https://lkml.kernel.org/r/20210324072931.5056-1-unixbhaskar@gmail.comSigned-off-by:
-
Joseph Qi authored
Use macro map_flag() is tricky and coccicheck outputs the following warning: fs/ocfs2/stack_o2cb.c:69:5-16: Unneeded variable: "o2dlm_flags" So map flags directly in flags_to_o2dlm() to make coccicheck happy. And remove BUG_ON() here as well to simplify code since it runs well a long time. Link: https://lkml.kernel.org/r/1616138664-35935-1-git-send-email-joseph.qi@linux.alibaba.comSigned-off-by:
-
Yang Li authored
Fix the following coccicheck warning: fs/ocfs2/blockcheck.c:232:0-23: WARNING: blockcheck_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE Link: https://lkml.kernel.org/r/1614155230-57292-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reported-by:
-
Zhang Yunkai authored
'asm-generic/tlb.h' included in 'asm/tlb.h' is duplicated. Link: https://lkml.kernel.org/r/20210304132020.196811-1-zhang.yunkai@zte.com.cnSigned-off-by:
Zhang Yunkai <zhang.yunkai@zte.com.cn> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Rich Felker <dalias@libc.org> Cc: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by:
-
Wan Jiabing authored
checkdeclares: find struct declared more than once. Inspired by checkincludes.pl. This script checks for duplicate struct declares. Note that this will not take into consideration macros, so you should run this only if you know you do have real dups and do not have them under #ifdef's. You could also just review the results. [akpm@linux-foundation.org: fix usage message, grammar] Link: https://lkml.kernel.org/r/20210401110943.1010796-1-wanjiabing@vivo.comSigned-off-by:
Wan Jiabing <wanjiabing@vivo.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Tom Saeger authored
Add a few entries for recent spelling fixes found. Opportunistically de-dupe: exeeds||exceeds Link: https://lore.kernel.org/lkml/31acb3239b7ab8989db0c9951e8740050aef0205.1616727528.git.tom.saeger@oracle.com/ Link: https://lore.kernel.org/lkml/fa193b3c9e346ff3fc157b54802c29b25f79c402.1615597995.git.tom.saeger@oracle.com/ Link: https://lkml.kernel.org/r/4a594a9e1536b1d9e5ba57f684c1e41457dd383b.1616861645.git.tom.saeger@oracle.comSigned-off-by:
Tom Saeger <tom.saeger@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Colin Ian King <colin.king@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Luc Van Oostenryck authored
Sparse can do constant folding of __builtin_bswap*() since 2017. Also, a much recent version of Sparse is needed anyway, see commit 6ec4476a ("Raise gcc version requirement to 4.9"). So, remove the comment about sparse not being yet able to constant fold __builtin_bswap*() and remove the corresponding test of __CHECKER__. Link: https://lkml.kernel.org/r/20210226092236.99369-1-luc.vanoostenryck@gmail.comSigned-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
-
Sergei Trofimovich authored
Noticed failure as a crash on ia64 when tried to symbolize all backtraces collected by page_owner=on: $ cat /sys/kernel/debug/page_owner <oops> CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226 Hardware name: hp server rx3600, BIOS 04.03 04/08/2008 ip is at dereference_module_function_descriptor+0x41/0x100 Crash happens at dereference_module_function_descriptor() due to use-after-free when dereferencing ".opd" section header. All section headers are already freed after module is laoded successfully. To keep symbolizer working the change stores ".opd" address and size after module is relocated to a new place and before section headers are discarded. To make similar errors less obscure module_finalize() now zeroes out all variables relevant to module loading only. Link: https://lkml.kernel.org/r/20210403074803.3309096-1-slyfox@gentoo.orgSigned-off-by: -
Sergei Trofimovich authored
DISCONTIGMEM was marked BROKEN in 5.11. Let's remove it. Booted SPARSEMEM successfully on rx3600. Link: https://lkml.kernel.org/r/20210404193440.2615358-1-slyfox@gentoo.orgSigned-off-by:
-
Sergei Trofimovich authored
At least ia64_mca_log_sal_error_record() expects some statement: static void ia64_mca_log_sal_error_record(int sal_info_type) { ... if (irq_safe) IA64_MCA_DEBUG("CPU %d: SAL log contains %s error record ", smp_processor_id(), sal_info_type < ARRAY_SIZE(rec_name) ? rec_name[sal_info_type] : "UNKNOWN"); ... } Instead of fixing all callers the change expicitly makes IA64_MCA_DEBUG a non-empty expression. Link: https://lkml.kernel.org/r/20210328215549.830420-1-slyfox@gentoo.orgSigned-off-by: -
Sergei Trofimovich authored
When enabled local debugging via `#define EFI_DEBUG 1` noticed build failure: arch/ia64/kernel/efi.c:564:8: error: 'i' undeclared (first use in this function) While at it fixed benign string format mismatches visible only when EFI_DEBUG is enabled: arch/ia64/kernel/efi.c:589:11: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Wformat=] Link: https://lkml.kernel.org/r/20210328212246.685601-1-slyfox@gentoo.org Fixes: 14fb4209 ("efi: Merge EFI system table revision and vendor checks") Signed-off-by: -
Bhaskar Chowdhury authored
s/seralize/serialize/ .....three different places Link: https://lkml.kernel.org/r/YFY+9uwvNLeb/3Ab@GentooSigned-off-by:
-
Sergei Trofimovich authored
Before the change CONFIG_INTEL_IOMMU && !CONFIG_SWIOTLB && !CONFIG_FLATMEM could skip `set_max_mapnr(max_low_pfn);` if iommu is not present on system. Link: https://lkml.kernel.org/r/20210328202439.403601-1-slyfox@gentoo.orgSigned-off-by:
-
Sergei Trofimovich authored
It's a remnant of deleted hpsim emulation target removed in fc5bad03 ("ia64: remove the hpsim platform"). Link: https://lkml.kernel.org/r/20210323224009.240625-1-slyfox@gentoo.orgSigned-off-by:
-
Valentin Schneider authored
John Paul reported a warning about bogus NUMA distance values spurred by commit: 620a6dc4 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort") In this case, the afflicted machine comes up with a reported 256 possible nodes, all of which are 0 distance away from one another. This was previously silently ignored, but is now caught by the aforementioned commit. The culprit is ia64's node_possible_map which remains unchanged from its initialization value of NODE_MASK_ALL. In John's case, the machine doesn't have any SRAT nor SLIT table, but AIUI the possible map remains untouched regardless of what ACPI tables end up being parsed. Thus, !online && possible nodes remain with a bogus distance of 0 (distances \in [0, 9] are "reserved and have no meaning" as per the ACPI spec). Follow x86 / drivers/base/arch_numa's example and set the possible map to the parsed map, which in this case seems to be the online map. Link: http://lore.kernel.org/r/255d6b5d-194e-eb0e-ecdd-97477a534441@physik.fu-berlin.de Link: https://lkml.kernel.org/r/20210318130617.896309-1-valentin.schneider@arm.com Fixes: 620a6dc4 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort") Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by:
-
Bhaskar Chowdhury authored
s/migraton/migration/ Link: https://lkml.kernel.org/r/20210313045519.9310-1-unixbhaskar@gmail.comSigned-off-by:
-
Bhaskar Chowdhury authored
Mundane spelling fixes. Link: https://lkml.kernel.org/r/20210311061058.29492-1-unixbhaskar@gmail.comSigned-off-by:
-
