- 15 Oct, 2021 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A few small fixes. Mostly driver specific but there's one in the core which fixes a deadlock when adding devices on spi-mux that's triggered because spi-mux is a SPI device which is itself a SPI controller and so can instantiate devices when registered. We were using a global lock to protect against reusing chip selects but they're a per controller thing so moving the lock per controller resolves that" * tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi-mux: Fix false-positive lockdep splats spi: Fix deadlock when adding SPI controllers on SPI buses spi: bcm-qspi: clear MSPI spifie interrupt during probe spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround spi: mediatek: skip delays if they are 0 spi: atmel: Fix PDC transfer setup bug spi: spidev: Add SPI ID table spi: Use 'flash' node name instead of 'spi-flash' in example
-
Linus Torvalds authored
Merge tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Just a trivial fix to the MAINTAINERS file for an update missed during conversion of the DT bindings to YAML format" * tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: MAINTAINERS: rectify entry for SY8106A REGULATOR DRIVER
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull mtd fix from Miquel Raynal: "Raw NAND controller driver fix: - Qcom: Update code word value for raw reads (QPIC v2+)" * tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: qcom: Update code word value for raw read
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "It has a few scattered msm and i915 fixes, a few core fixes and a mediatek feature revert. I've had to pick a bunch of patches into this, as the drm-misc-fixes tree had a bunch of vc4 patches I wasn't comfortable with sending to you at least as part of this, they were delayed due to your reverts. If it's really useful as fixes I'll do a separate pull. Summary: Core: - clamp fbdev size - edid cap blocks read to avoid out of bounds panel: - fix missing crc32 dependency msm: - Fix a new crash on dev file close if the dev file was opened when GPU is not loaded (such as missing fw in initrd) - Switch to single drm_sched_entity per priority level per drm_file to unbreak multi-context userspace - Serialize GMU access to fix GMU OOB errors - Various error path fixes - A couple integer overflow fixes - Fix mdp5 cursor plane WARNs i915: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call hyperv: - hide hw pointer nouveau: - fix engine selection bit r128: - fix UML build rcar-du: - unconncted LVDS regression fix mediatek: - revert CMDQ refinement patches" * tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/panel: olimex-lcd-olinuxino: select CRC32 drm/r128: fix build for UML drm/nouveau/fifo: Reinstate the correct engine bit programming drm/hyperv: Fix double mouse pointers drm/fbdev: Clamp fbdev surface size if too large drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read drm/i915: Free the returned object of acpi_evaluate_dsm() drm/i915: Fix bug in user proto-context creation that leaked contexts drm: rcar-du: Don't create encoder for unconnected LVDS outputs drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready drm/msm/dsi/phy: fix clock names in 28nm_8960 phy drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ register drm/msm: Do not run snapshot on non-DPU devices drm/msm/a3xx: fix error handling in a3xx_gpu_init() drm/msm/a4xx: fix error handling in a4xx_gpu_init() drm/msm: Fix null pointer dereference on pointer edp drm/msm/mdp5: fix cursor-related warnings drm/msm: Avoid potential overflow in timeout_to_jiffies() ... -
git://github.com/Paragon-Software-Group/linux-ntfs3Linus Torvalds authored
Pull ntfs3 fixes from Konstantin Komarov: "Use the new api for mounting as requested by Christoph. Also fixed: - some memory leaks and panic - xfstests (tested on x86_64) generic/016 generic/021 generic/022 generic/041 generic/274 generic/423 - some typos, wrong returned error codes, dead code, etc" * tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3: (70 commits) fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list fs/ntfs3: Refactor ntfs_read_mft fs/ntfs3: Refactor ni_parse_reparse fs/ntfs3: Refactor ntfs_create_inode fs/ntfs3: Refactor ntfs_readlink_hlp fs/ntfs3: Rework ntfs_utf16_to_nls fs/ntfs3: Fix memory leak if fill_super failed fs/ntfs3: Keep prealloc for all types of files fs/ntfs3: Remove unnecessary functions fs/ntfs3: Forbid FALLOC_FL_PUNCH_HOLE for normal files fs/ntfs3: Refactoring of ntfs_set_ea fs/ntfs3: Remove locked argument in ntfs_set_ea fs/ntfs3: Use available posix_acl_release instead of ntfs_posix_acl_release fs/ntfs3: Check for NULL if ATTR_EA_INFO is incorrect fs/ntfs3: Refactoring of ntfs_init_from_boot fs/ntfs3: Reject mount if boot's cluster size < media sector size fs/ntfs3: Refactoring lock in ntfs_init_acl fs/ntfs3: Change posix_acl_equiv_mode to posix_acl_update_mode fs/ntfs3: Pass flags to ntfs_set_ea in ntfs_set_acl_ex fs/ntfs3: Refactor ntfs_get_acl_ex for better readability ... -
Vegard Nossum authored
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.comSigned-off-by:
Dave Airlie <airlied@redhat.com>
-
Randy Dunlap authored
Fix a build error on CONFIG_UML, which does not support (provide) wbinvd(). UML can use the generic mb() instead. ../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’: ../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration] wbinvd(); ^~~~~~ Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Marek Vasut authored
Commit 64f7c698 ("drm/nouveau/fifo: add engine_id hook") replaced fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned from the later g84_fifo_engine_id() are incremented by 1 compared to the previous g84_fifo_chan_engine() return values. This is fine either way for most of the code, except this one line where an engine bit programmed into the hardware is derived from the return value. Decrement the return value accordingly, otherwise the wrong engine bit is programmed into the hardware and that leads to the following failure: nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420 On the following hardware: lspci -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2) lspci -ns 01:00.0 01:00.0 0300: 10de:0a3c (rev a2) Fixes: 64f7c698 ("drm/nouveau/fifo: add engine_id hook") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 5.12+ Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Dexuan Cui authored
Hyper-V supports a hardware cursor feature. It is not used by Linux VM, but the Hyper-V host still draws a point as an extra mouse pointer, which is unwanted, especially when Xorg is running. The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer. When the hyperv_drm driver was developed, the function synthvid_send_ptr() was not copied from the hyperv_fb driver. Fix the issue by adding the function into hyperv_drm. Fixes: 76c56a5a ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Deepak Rawat <drawat.floss@gmail.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.comSigned-off-by:
-
Thomas Zimmermann authored
Clamp the fbdev surface size of the available maximumi height to avoid failing to init console emulation. An example error is shown below. bad framebuffer height 2304, should be >= 768 && <= 768 [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22) This is especially a problem with drivers that have very small screen sizes and cannot over-allocate at all. v2: * reduce warning level (Ville) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reported-by:
Amanoel Dawod <kernel@amanoeldawod.com> Reported-by:
Zoltán Kővágó <dirty.ice.hu@gmail.com> Reported-by:
Michael Stapelberg <michael+lkml@stapelberg.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.deSigned-off-by:
-
Douglas Anderson authored
In commit e11f5bd8 ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. Fixes: e11f5bd8 ("drm: Add support for DP 1.4 Compliance edid corruption test") Reported-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Dave Airlie authored
Merge tag 'mediatek-drm-fixes-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.15 1. Revert series "CMDQ refinement of Mediatek DRM driver" Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-10-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc6: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call Signed-off-by:
-
- 14 Oct, 2021 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ... -
Xin Long authored
In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done step by step and skb_header_pointer() return value should always be checked, this patch fixes 3 places in there: - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name from skb by skb_header_pointer(), its len is ident_len. Besides, the return value of skb_header_pointer() should always be checked. - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of skb_header_pointer(), and also do the return value check for skb_header_pointer(). - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr. ctype3_hdr.addrlen, skb_header_pointer() should be called first, then check its return value and ident_len. On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident. addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value. On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in_addr)" or "ident_len". v1->v2: - To make it more clear, call skb_header_pointer() once only for iio->indent's parsing as Jakub Suggested. v2->v3: - The extobj_hdr.length check against sizeof(_iio) should be done before calling skb_header_pointer(), as Eric noticed. Fixes: d329ea5b ("icmp: add response to RFC 8335 PROBE messages") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Cai Huoqing authored
Change the devicetree documentation path to "Documentation/devicetree/bindings/net/fsl,fec.yaml" since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.comSigned-off-by:
-
Eiichi Tsukata authored
sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Greg KH <gregkh@linuxfoundation.org> Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Reviewed-by:
-
Ido Schimmel authored
Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce08 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35 ("mlxsw: core: Implement thermal zone") Fixes: a421ce08 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.orgSigned-off-by:
-
Arnd Bergmann authored
After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd37688 ("S2io: Added support set_mac_address driver entry point") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.orgSigned-off-by:
-
Dinh Nguyen authored
Richard Gong is no longer at Intel, so update the MAINTAINER's entry for the Stratix10 firmware drivers. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains quite a few device-specific fixes for usual HD- and USB-audio in addition to a couple of ALSA core fixes (a UAF fix in sequencer and a fix for a misplaced PCM 32bit compat ioctl). Nothing really stands out" * tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for VF0770 ALSA: hda: avoid write to STATESTS if controller is in reset ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 ALSA: hda: intel: Allow repeatedly probing on codec configuration errors ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 ALSA: hda/realtek - ALC236 headset MIC recording issue ALSA: usb-audio: Enable rate validation for Scarlett devices ALSA: hda/realtek: Add quirk for Clevo X170KM-G ALSA: hda/realtek: Complete partial device name to avoid ambiguity ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 ALSA: seq: Fix a potential UAF by wrong private_free call order ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer
-
Uwe Kleine-König authored
io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls spi_setup() which results in a nested lock of io_mutex. add_lock is taken by spi_add_device(). The device_add() call in there can result in calling spi-mux's .probe() callback which registers its own spi controller which in turn results in spi_add_device() being called again. To fix this initialize the controller's locks already in spi_alloc_controller() to give spi_mux_probe() a chance to set the lockdep subclass. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.deSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. Reported-by:
-
Jakub Kicinski authored
Ziyang Xuan says: ==================== Fix two possible memory leak problems in NFC digital module. ==================== Link: https://lore.kernel.org/r/cover.1634111083.git.william.xuanziyang@huawei.comSigned-off-by:
-
Ziyang Xuan authored
'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. Fixes: 2c66daec ("NFC Digital: Add NFC-A technology support") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Ziyang Xuan authored
'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. Fixes: 1c7a4c24 ("NFC Digital: Add target NFC-DEP support") Signed-off-by:
-
Ziyang Xuan authored
When nfc proto id is using, nfc_proto_register() return -EBUSY error code, but forgot to unregister proto. Fix it by adding proto_unregister() in the error handling case. Fixes: c7fe3b52 ("NFC: add NFC socket family") Signed-off-by:
-
Vladimir Oltean authored
This reverts commit ec18e845. It turns out that there are user space programs which got broken by that change. One example is the "ifstat" program shipped by Debian: https://packages.debian.org/source/bullseye/ifstat which, confusingly enough, seems to not have anything in common with the much more familiar (at least to me) ifstat program from iproute2: https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/tree/misc/ifstat.c root@debian:~# ifstat ifstat: /proc/net/dev: unsupported format. This change modified the header (first two lines of text) in /proc/net/dev so that it looks like this: root@debian:~# cat /proc/net/dev Interface| Receive | Transmit | bytes packets errs drop fifo frame compressed multicast| bytes packets errs drop fifo colls carrier compressed lo: 97400 1204 0 0 0 0 0 0 97400 1204 0 0 0 0 0 0 bond0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eno2: 5002206 6651 0 0 0 0 0 0 105518642 1465023 0 0 0 0 0 0 swp0: 134531 2448 0 0 0 0 0 0 99599598 1464381 0 0 0 0 0 0 swp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp2: 4867675 4203 0 0 0 0 0 0 58134 631 0 0 0 0 0 0 sw0p0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p1: 124739 2448 0 1422 0 0 0 0 93741184 1464369 0 0 0 0 0 0 sw0p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p0: 4850863 4203 0 0 0 0 0 0 54722 619 0 0 0 0 0 0 sw2p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 br0: 10508 212 0 212 0 0 0 212 61369558 958857 0 0 0 0 0 0 whereas before it looked like this: root@debian:~# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 13160 164 0 0 0 0 0 0 13160 164 0 0 0 0 0 0 bond0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eno2: 30824 268 0 0 0 0 0 0 3332 37 0 0 0 0 0 0 swp0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 swp2: 30824 268 0 0 0 0 0 0 2428 27 0 0 0 0 0 0 sw0p0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw0p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p0: 29752 268 0 0 0 0 0 0 1564 17 0 0 0 0 0 0 sw2p1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 sw2p3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The reason why the ifstat shipped by Debian (v1.1, with a Debian patch upgrading it to 1.1-8.1 at the time of writing) is broken is because its "proc" driver/backend parses the header very literally: main/drivers.c#L825 if (!data->checked && strncmp(buf, "Inter-|", 7)) goto badproc; and there's no way in which the header can be changed such that programs parsing like that would not get broken. Even if we fix this ancient and very "lightly" maintained program to parse the text output of /proc/net/dev in a more sensible way, this story seems bound to repeat again with other programs, and modifying them all could cause more trouble than it's worth. On the other hand, the reverted patch had no other reason than an aesthetic one, so reverting it is the simplest way out. I don't know what other distributions would be affected; the fact that Debian doesn't ship the iproute2 version of the program (a different code base altogether, which uses netlink and not /proc/net/dev) is surprising in itself. Fixes: ec18e845 ("net: procfs: add seq_puts() statement for dev_mcast") Link: https://lore.kernel.org/netdev/20211009163511.vayjvtn3rrteglsu@skbuf/ Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20211013001909.3164185-1-vladimir.oltean@nxp.comSigned-off-by:
-
- 13 Oct, 2021 12 commits
-
-
Nanyong Sun authored
devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7 ("net: Microchip encx24j600 driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-10-12 * tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp net/mlx5e: Switchdev representors are not vlan challenged net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode net/mlx5: Fix cleanup of bridge delayed work ==================== Link: https://lore.kernel.org/r/20211012205323.20123-1-saeed@kernel.orgSigned-off-by:
-
Vegard Nossum authored
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291b ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Florian fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.comSigned-off-by:
-
Vegard Nossum authored
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682 ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull modules fix from Jessica Yu: - Build fix for cfi_init() when CONFIG_MODULE_UNLOAD=n * tag 'modules-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: fix clang CFI with MODULE_UNLOAD=n
-
Zenghui Yu authored
As per the comment on top of acpi_evaluate_dsm(): | * Evaluate device's _DSM method with specified GUID, revision id and | * function number. Caller needs to free the returned object. We should free the returned object of acpi_evaluate_dsm() to avoid memory leakage. Otherwise the kmemleak splat will be triggered at boot time (if we compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y). Fixes: 8e55f99c ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Matthew Brost authored
Set number of engines before attempting to create contexts so the function free_engines can clean up properly. Also check return of alloc_engines for NULL. v2: (Tvrtko) - Send as stand alone patch (John Harrison) - Check for alloc_engines returning NULL v3: (Checkpatch / Tvrtko) - Remove braces around single line if statement Cc: Jason Ekstrand <jason@jlekstrand.net> Fixes: d4433c76 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Felix DSA driver fixes This is an assorted collection of fixes for issues seen on the NXP LS1028A switch. - PTP packet drops due to switch congestion result in catastrophic damage to the driver's state - loops are not blocked by STP if using the ocelot-8021q tagger - driver uses the wrong CPU port when two of them are defined in DT - module autoloading is broken* with both tagging protocol drivers (ocelot and ocelot-8021q) Changes in v2: - Stop printing that we aren't going to take TX timestamps if we don't have TX timestamping anyway, and we are just carrying PTP frames for a cascaded DSA switch. - Shorten the deferred xmit kthread name so that it fits the 16 character limit (TASK_COMM_LEN) ==================== Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by:
-
Vladimir Oltean authored
When setting up a bridge with stp_state 1, topology changes are not detected and loops are not blocked. This is because the standard way of transmitting a packet, based on VLAN IDs redirected by VCAP IS2 to the right egress port, does not override the port STP state (in the case of Ocelot switches, that's really the PGID_SRC masks). To force a packet to be injected into a port that's BLOCKING, we must send it as a control packet, which means in the case of this tagger to send it using the manual register injection method. We already do this for PTP frames, extend the logic to apply to any link-local MAC DA. Fixes: 7c83a7c5 ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by:
-
Vladimir Oltean authored
At present, when a PTP packet which requires TX timestamping gets dropped under congestion by the switch, things go downhill very fast. The driver keeps a clone of that skb in a queue of packets awaiting TX timestamp interrupts, but interrupts will never be raised for the dropped packets. Moreover, matching timestamped packets to timestamps is done by a 2-bit timestamp ID, and this can wrap around and we can match on the wrong skb. Since with the default NPI-based tagging protocol, we get no notification about packet drops, the best we can do is eventually recover from the drop of a PTP frame: its skb will be dead memory until another skb which was assigned the same timestamp ID happens to find it. However, with the ocelot-8021q tagger which injects packets using the manual register interface, it appears that we can check for more information, such as: - whether the input queue has reached the high watermark or not - whether the injection group's FIFO can accept additional data or not so we know that a PTP frame is likely to get dropped before actually sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet). But when we do that, we can also remove the skb from the timestamping queue, because there surely won't be any timestamp that matches it. Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by:
-
Vladimir Oltean authored
Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
