'rtl_get_tid_h()' is the same as 'ieee80211_get_tid()'.
So this function can be removed to save a line of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/db340a67a95c119e4f9ba8fa99aea1c73d0dcfc9.1617383263.git.christophe.jaillet@wanadoo.fr

Assigning value "3" to "rtlpriv->btcoexist.reg_bt_sco" here, but that
stored value is overwritten before it can be used.

Coverity reports this problem as
CWE563: A value assigned to a variable is never used.
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c:
rtl8188ee_bt_reg_init
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1617182023-110950-1-git-send-email-yang.lee@linux.alibaba.com

Variable err is assigned -ENODEV followed by an error return path
via label error_out that does not access the variable and returns
with the -ENODEV error return code. The assignment to err is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210327230014.25554-1-colin.king@canonical.com

s/resovle/resolve/
s/broadcase/broadcast/
s/sytem/system/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210320194426.21621-1-unixbhaskar@gmail.com

some function's label meaningless, the return statement follows
the goto statement, so just remove it.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210223065754.34392-1-samirweng1979@163.com

The signal strength of 5G is quite low, so user can't connect to an AP far
away. New parameters with new format and its parser are updated by the commit
84d26fda ("rtlwifi: Update 8821ae new phy parameters and its parser."), but
some parameters are missing. Use this commit to update to the novel parameters
that use new format.

Fixes: 84d26fda ("rtlwifi: Update 8821ae new phy parameters and its parser")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com

Remove the 'wsm_*' typedef as it is not used.
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1613449833-4910-1-git-send-email-chen45464546@163.com

Remove the 'cw1200_wsm_handler' typedef as it is not used.
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1613446918-4532-1-git-send-email-chen45464546@163.com

Merge tag 'iwlwifi-next-for-kalle-2021-04-12-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches for v5.13

* Add support for new FTM FW APIs;
* Some CSA fixes;
* Support for new HW family and other HW detection fixes;
* Robustness improvement in the HW detection code;
* One fix in PMF;
* Some new regulatory features;
* Support for passive scan in 6GHz;
* Some improvements in the sync queue implementation;
* Support for new devices;
* Support for a new FW API command version;
* Some locking fixes;
* Bump the FW API version support for AX devices;
* Some other small fixes, clean-ups and improvements.

# gpg: Signature made Wed 14 Apr 2021 12:33:29 PM EEST using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg:                 aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"

mt76 patches for 5.13

* code cleanup
* mt7915/mt7615 decap offload support
* driver fixes
* mt7613 eeprom support
* MCU code unification
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support

# gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900  42EF D77D 141D 02A7 6EF5

Merge tag 'linux-can-next-for-5.13-20210414' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-04-14

this is a pull request of a single patch for net-next/master.

Vincent Mailhol's patch fixes a NULL pointer dereference when handling
error frames in the etas_es58x driver, which has been added in the
previous PR.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

af_packet fanout uses RCU rules to ensure f->arr elements
are not dismantled before RCU grace period.

However, it lacks rcu accessors to make sure KCSAN and other tools
wont detect data races. Stupid compilers could also play games.

Fixes: dc99f600 ("packet: Add fanout support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some Ethernet switches might only be able to support disabling multicast
snooping globally, which is an issue for example when several bridges
span the same physical device and request contradictory settings.

Propagate the return value of br_mc_disabled_update() such that this
limitation is transmitted correctly to user-space.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-04-13

mlx5 core and netdev driver updates

1) E-Switch updates from Parav,
  1.1) Devlink parameter to control mlx5 metadata enablement for E-Switch
  1.2) Trivial cleanups for E-Switch code
  1.3) Dynamically allocate vport steering namespaces only when required

2) From Jianbo, Use variably sized data structures for Software steering

3) Several minor cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Normally, the bootloader will already initialize the MAC address
registers of the ENETC and the driver will just use them or generate a
random one, if it is not initialized.

Add a new way to provide the MAC address: via device tree. Besides the
usual 'mac-address' property, there is also the possibility to fetch it
via a NVMEM provider. The sl28 board stores the MAC address in the SPI
NOR flash OTP region. Having this will allow linux to fetch the MAC
address from there without being dependent on the bootloader.

No in-tree boards have the device tree properties set, thus for these,
this is a no-op.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following coccicheck warning:

./drivers/net/ethernet/sfc/enum.h:80:7-28: duplicated argument to |
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the commit 1ddc3229 ("skbuff: remove some unnecessary operation
in skb_segment_list()") introduces an issue very similar to the
one already fixed by commit 53475c5d ("net: fix use-after-free when
UDP GRO with shared fraglist").

If the GSO skb goes though skb_clone() and pskb_expand_head() before
entering skb_segment_list(), the latter  will unshare the frag_list
skbs and will release the old list. With the reverted commit in place,
when skb_segment_list() completes, skb->next points to the just
released list, and later on the kernel will hit UaF.

Note that since commit e0e3070a ("udp: properly complete L4 GRO
over UDP tunnel packet") the critical scenario can be reproduced also
receiving UDP over vxlan traffic with:

NIC (NETIF_F_GRO_FRAGLIST enabled) -> vxlan -> UDP sink

Attaching a packet socket to the NIC will cause skb_clone() and the
tunnel decapsulation will call pskb_expand_head().

Fixes: 1ddc3229 ("skbuff: remove some unnecessary operation in skb_segment_list()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following clang warning:

drivers/atm/idt77252.c:1787:1: warning: unused function
'idt77252_fbq_level' [-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2021-04-14

Not much this time:

1) Simplification of some variable calculations in esp4 and esp6.
   From Jiapeng Chong and Junlin Yang.

2) Fix a clang Wformat warning in esp6 and ah6.
   From Arnd Bergmann.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for the [g|s]et_pauseparam ethtool ops. It considers
that the chip doesn't support pause frame use in jumbo mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
10GbE Intel Wired LAN Driver Updates 2021-04-13

This series contains updates to ixgbe and ixgbevf driver.

Jostar Yang adds support for BCM54616s PHY for ixgbe.

Chen Lin removes an unused function pointer for ixgbe and ixgbevf.

Bhaskar Chowdhury fixes a typo in ixgbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The Synopsis MAC controller supports auxiliary snapshot feature that
allows user to store a snapshot of the system time based on an external
event.

This patch add supports to the above mentioned feature. Users will be
able to triggered capturing the time snapshot from user-space using
application such as testptp or any other applications that uses the
PTP_EXTTS_REQUEST ioctl request.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Tan Tee Min <tee.min.tan@intel.com>
Co-developed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ivan Bornyakov says:

====================
net: phy: marvell-88x2222: a couple of improvements

First, there are some SFP modules that only uses RX_LOS for link
indication. Add check that link is operational before actual read of
line-side status.

Second, it is invalid to set 10G speed without autonegotiation,
according to phy_ethtool_ksettings_set(). Implement switching between
10GBase-R and 1000Base-X/SGMII if autonegotiation can't complete but
there is signal in line.

Changelog:
  v1 -> v2:
    * make checking that link is operational more friendly for
      trancievers without SFP cages.
    * split swapping 1G/10G modes into non-functional and functional
      commits for the sake of easier review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting 10G without autonegotiation is invalid according to
phy_ethtool_ksettings_set(). Thus, we need to set it during
autonegotiation.

If 1G autonegotiation can't complete for quite a time, but there is
signal in line, switch line interface type to 10GBase-R, if supported,
in hope for link to be established.

And vice versa. If 10GBase-R link can't be established for quite a time,
and autonegotiation is enabled, and there is signal in line, switch line
interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if
supported.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

No functional changes, just move read link status routines below
autonegotiation configuration to make future functional changes more
distinct.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some SFP modules uses RX_LOS for link indication. In such cases link
will be always up, even without cable connected. RX_LOS changes will
trigger link_up()/link_down() upstream operations. Thus, check that SFP
link is operational before actual read link status.

If there is no SFP cage connected to the tranciever, check only PMD
Recieve Signal Detect register.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow to create an RQ which is not registered as an XDP RQ. For example:
the trap-RQ doesn't register as an XDP RQ.

Fixes: 869c5f92 ("net/mlx5e: Generalize open RQ")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There should be no spaces at the start of the line.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

void function return statements are not generally useful.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There should be a blank lines after declarations.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT
is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended
to be a bit-flag. Fix this by using the == operator as was originally
intended.

Addresses-Coverity: ("Logically dead code")
Fixes: 7dfee4b1 ("net/mlx5: IPsec, Refactor SA handle creation and destruction")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cmd size is 8K so use kvzalloc().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5dr_action is a generally used data structure, and there is an
union for different types of actions in it. The size of mlx5dr_action
is about 72 bytes, but for those actions with fewer fields, most of
the allocated memory is wasted.
Remove this union, and mlx5dr_action becomes a generic action header.
Then actions are dynamically allocated with needed memory, the data
for each action is stored right after the header.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SF's hardware function id is already stored in mlx5_sf. Reuse it,
instead of querying the hw table.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

At many places in the code, device pointer is directly available. Make
use of it, instead of accessing it from the table.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently eswitch flow steering (FS) namespace of vport's ingress and
egress ACL are enabled when FS layer is initialized. This is done even
when eswitch is diabled. This demands that total eswitch ports to be
known to FS layer without eswitch in use.

Given the FS core is not dependent on eswitch, make namespace init and
cleanup routines as helper routines to be invoked only when eswitch is
needed.

With this change, ingress and egress ACL namespaces are created only
when eswitch legacy/offloads mode is enabled.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently eswitch offers two modes. Legacy and offloads.
Offloads code is already in its own file eswitch_offloads.c

However eswitch.c contains the eswitch legacy code and common
infrastructure  code.

To enable future extensions and to better manage generic common eswitch
infrastructure code, move the legacy code to its own legacy.c file.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Convert ESW_ALLOWED macro to a helper routine so that it can be used in
other eswitch files.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Make cleanup sequence mirror of init sequence for cleaning up reps
and freeing vports.

Also when reps initialization fails, there is no need to perform reps
cleanup.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Vport number is 16-bit field in hardware. Make it u16.

Move location of vport in the structure so that it reduces a hole
in the structure.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>