- 24 Mar, 2021 2 commits
-
-
Kai Vehmanen authored
Update logic to program AUD_FREQ_CNTRL register based on new guidance. Earlier this register was configured by BIOS and driver discovered the value at init. This is no longer recommended and instead driver should set the values based on the hardware revision. Add the recommended values for all supported hardware. This change applies for all GEN12+ hardware. For TGL, some special case handling is needed to not break existing systems. Extend the debug print to also include values of the register as written by BIOS. This can help debug rare cases where BIOS has configured the link settings to incorrect values. Bspec: 49279 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324123725.4170214-1-kai.vehmanen@linux.intel.com
-
Imre Deak authored
To optimize some task deferring it until runtime resume unless someone holds a runtime PM reference (because in this case the task can be done w/o the overhead of runtime resume), we have to use the runtime PM get-if-active logic: If the runtime PM usage count is 0 (and so get-if-in-use would return false) the runtime suspend handler is not necessarily called yet (it could be just pending), so the device is not necessarily powered down, and so the runtime resume handler is not guaranteed to be called. The fence revocation depends on the above deferral, so add a get-if-active helper and use it during fence revocation. v2: - Add code comment explaining the fence reg programming deferral logic to i915_vma_revoke_fence(). (Chris) - Add Cc: stable and Fixes: tags. (Chris) - Fix the function docbook comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 181df2d4 ("drm/i915: Take rpm wakelock for releasing the fence on unbind") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com
-
- 23 Mar, 2021 7 commits
-
-
Matt Roper authored
GLK has always been a bit of a special case since it reports INTEL_GEN() as 9, but has version 10 display IP. Now we can properly represent the display version as 10 and simplify the display generation tests throughout the display code. Aside from manually adding the version to the glk_info structure, the rest of this patch is generated with a Coccinelle semantic patch. Note that we also need to switch any code that matches gen10 today but *not* GLK to be CNL-specific: @@ expression dev_priv; @@ - DISPLAY_VER(dev_priv) > 9 + DISPLAY_VER(dev_priv) >= 10 @@ expression dev_priv, E; @@ ( - DISPLAY_VER(dev_priv) >= 10 && E + (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) && E | - DISPLAY_VER(dev_priv) >= 10 + DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) | - IS_DISPLAY_RANGE(dev_priv, 10, E) + IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_CANNONLAKE(dev_priv) ) @@ expression dev_priv, E, E2; @@ ( - (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - E || IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv) + E || IS_DISPLAY_VER(dev_priv, 10) | - (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - IS_GEMINILAKE(dev_priv) || E || IS_CANNONLAKE(dev_priv) + E || IS_DISPLAY_VER(dev_priv, 10) | - E || IS_GEMINILAKE(dev_priv) || E2 || IS_CANNONLAKE(dev_priv) + E || E2 || IS_DISPLAY_VER(dev_priv, 10) | - (IS_DISPLAY_VER(dev_priv, 10) || IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - (IS_GEMINILAKE(dev_priv) || IS_DISPLAY_VER(dev_priv, 10)) + IS_DISPLAY_VER(dev_priv, 10) ) @@ expression dev_priv; @@ - (IS_DISPLAY_VER(dev_priv, 9) && !IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 9) @@ expression dev_priv; @@ ( - !(DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)) + DISPLAY_VER(dev_priv) < 10 | - (DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)) + DISPLAY_VER(dev_priv) >= 10 ) @@ expression dev_priv, E; @@ - E || DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10) + E || DISPLAY_VER(dev_priv) >= 10 @@ expression dev_priv, E; @@ - (IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_DISPLAY_VER(dev_priv, 10)) + IS_DISPLAY_RANGE(dev_priv, 10, E) @@ expression dev_priv; @@ ( - DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) || IS_GEN9_LP(dev_priv) + DISPLAY_VER(dev_priv) >= 10 || IS_GEN9_LP(dev_priv) | - IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) + IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 10 ) @@ expression dev_priv, E; @@ - !(DISPLAY_VER(dev_priv) >= E) + DISPLAY_VER(dev_priv) < E v2: - Convert gen10 conditions that don't include GLK into CNL conditions. (Ville) v3: - Rework coccinelle rules so that "ver>=10" turns into "ver>=11||is_cnl." (Ville) v3.1: - Manually re-add the ".display.version = 10" to glk_info after regenerating patch via Coccinelle. v4: - Also apply cocci rules to intel_pm.c and i915_irq.c! (CI) Cc: Ville Syrjälä <ville.syrjala@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322233840.4056851-1-matthew.d.roper@intel.com
-
Matt Roper authored
Convert the display-specific usage of INTEL_GEN, while leaving the non-display usage as-is for now. In the near-future we'll probably want to think about moving display interrupt handling to its own file under the display/ directory. v2: - Use new IS_DISPLAY_VER() macro. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-6-matthew.d.roper@intel.com
-
Matt Roper authored
Although most of the code in this file is display-related (watermarks), there's some functions that are not (e.g., clock gating). Thus we need to do the conversions to DISPLAY_VER() manually here rather than using Coccinelle. In the near-future we'll probably want to think about moving watermark logic out of intel_pm.c and into watermark-specific files under the display/ directory. v2: - Use new IS_DISPLAY_VER macro where appropriate. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-5-matthew.d.roper@intel.com
-
Matt Roper authored
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN() in the display code to use DISPLAY_VER() comparisons instead. The following semantic patch was used: @@ expression dev_priv, E; @@ - INTEL_GEN(dev_priv) == E + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; @@ - INTEL_GEN(dev_priv) + DISPLAY_VER(dev_priv) @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_DISPLAY_RANGE(dev_priv, from, until) There are still some display-related uses of INTEL_GEN() in intel_pm.c (watermark code) and i915_irq.c. Those will be updated separately. v2: - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
-
Matt Roper authored
Although we've long referred to platforms by a single "GEN" number, the hardware teams have recommended that we stop doing this since the various component IP blocks are going to start using independent number schemes with varying cadence. To support this, hardware platforms a bit down the road are going to start providing MMIO registers that the driver can read to obtain the "graphics version," "media version," and "display version" without needing to do a PCI ID -> platform -> version translation. Although our current platforms don't yet expose these registers (and the next couple we release probably won't have them yet either), the hardware teams would still like to see us move to this independent numbering scheme now in preparation. For i915 that means we should try to eliminate all usage of INTEL_GEN() throughout our code and instead replace it with separate GRAPHICS_VER(), MEDIA_VER(), and DISPLAY_VER() constructs in the code. For old platforms, these will all usually give the same value for each IP block (aside from a few special cases like GLK which we can no more accurately represent as graphics=9 + display=10), but future platforms will have more flexibility to bump IP version numbers independently. The upcoming ADL-P platform will have a display version of 13 and a graphics version of 12, so let's just the first step of breaking out DISPLAY_VER(), but leaving the rest of INTEL_GEN() untouched for now. For now we'll automatically derive the display version from the platform's INTEL_GEN() value except in cases where an alternative display version is explicitly provided in the device info structure. We also add some helper macros IS_DISPLAY_VER(i915, ver) and IS_DISPLAY_RANGE(i915, from, until) that match the behavior of the existing gen-based macros. However unlike IS_GEN(), we will implement those macros with direct comparisons rather than trying to maintain a mask to help compiler optimization. In practice the optimization winds up not being used in very many places (since the vast majority of our platform checks are of the form "gen >= x") so there is pretty minimal size reduction in the final driver binary[1]. We're also likely going to need to extend these version numbers to non-integer major.minor values at some point in the future, so the mask approach won't work at all once we get to platforms like that. [1] The results before/after the next patch in this series, which switches our code over to the new display macros: $ size i915.ko.{orig,new} text data bss dec hex filename 2940291 102944 5384 3048619 2e84ab i915.ko.orig 2940723 102956 5384 3049063 2e8667 i915.ko.new v2: - Move version into device info's display sub-struct. (Jani) - Add extra parentheses to macros. (Jani) - Note the lack of genmask optimization in the display-based macros and give size data. (Lucas) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-3-matthew.d.roper@intel.com
-
Matt Roper authored
ILK is the only platform that we consider "gen5" and SNB is the only platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then replace numeric platform tests for these two generations with direct platform tests with the following Coccinelle semantic patch: @@ expression dev_priv; @@ - IS_GEN(dev_priv, 5) + IS_IRONLAKE(dev_priv) @@ expression dev_priv; @@ - IS_GEN(dev_priv, 6) + IS_SANDYBRIDGE(dev_priv) @@ expression dev_priv; @@ - IS_GEN_RANGE(dev_priv, 5, 6) + IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv) This will simplify our upcoming patches which eliminate INTEL_GEN() usage in the display code. v2: - Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville) - Rebase + regenerate from semantic patch Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
-
Jani Nikula authored
Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c11 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com
-
- 22 Mar, 2021 5 commits
-
-
Ville Syrjälä authored
The enabled_planes bitmask was supposed to track logically enabled planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting even disabled planes into the bitmask since intel_plane_atomic_check_with_state() only takes the early exit if the plane was disabled and stays disabled. I think I misread the early said codepath to exit whenever the plane is logically disabled, which is not true. So let's fix this up properly and set the bit only when the plane actually is logically enabled. Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: ee42ec19 ("drm/i915: Track logically enabled planes for hw state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.comReviewed-by: Manasi Navare <manasi.d.navare@intel.com>
-
Anshuman Gupta authored
hdcp2_enable_stream_encryption shouldn't get called in case of any port authentication or encryption error, though hdcp2_enable_stream_encryption checks for link encryption before enabling stream encryption and returns error but this return error code won't be correct in case of any error due to port authentication and encryption. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-4-anshuman.gupta@intel.com
-
Anshuman Gupta authored
When stream encryption enabling fails due to Link encryption status has stopped, prepare HDCP2 for recovery by disabling port authentication and encryption such that it can re-attempt port authentication and encryption. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-3-anshuman.gupta@intel.com
-
Anshuman Gupta authored
DP MST Link Check performed only for the connector involved with HDCP port authentication and encryption, for other connector it simply returns link check with true and update the uevent. Therefore in case of HDCP 2.2 link failure, disable HDCP encryption and de-authenticate the port so next time it can enable port authentication and encryption. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-2-anshuman.gupta@intel.com
-
Anshuman Gupta authored
It requires to check streams type1 capability in mst topology by checking Rxinfo instead connector HDCP2.x capability in order to enforce type0 stream encryption in a mix of HDCP {1.x,2.x} mst topology. Rxcaps always shows HDCP 2.x capability of immediate downstream connector. Let's use Rxinfo HDCP1_DEVICE_DOWNSTREAM bit to detect a HDCP {1.x,2.x} mix mst topology. Cc: Sean Paul <seanpaul@chromium.org> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319091732.17547-1-anshuman.gupta@intel.com
-
- 19 Mar, 2021 11 commits
-
-
Ville Syrjälä authored
s/intel_/g4x_/ for the externally visible g4x_{dp,hdmi}.c functions. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-8-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Extract the g4x+ HDMI low level code to its own file, leaving intel_hdmi.c to deal with higher level issues. The infoframe support I decided to leave in intel_hdmi.c since I think we need to move that as a whole to its own file. It is after all used also for DP SDPs, so no longer HDMI specific. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-7-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Move the g4x+ DP code into a new file. This will leave mostly platform agnostic code in intel_dp.c. Well, the misplaced phy test stuff pretty much ruins that, but let's squint real hard for now. v2: Add comment exlaining which platforms are covered (Daniel) Leave intel_dp_unused_lane_mask() be since it is pretty generic Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-6-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Most of intel_dp_encoder_reset() is for pre-ddi platforms. Make a clean split. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-5-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
intel_dp_program_link_training_pattern() clearly belongs in intel_dp_link_training.c. Make it so. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-4-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
If we ever get here with bogus signal levels we've messed up somewhere earlier. Just use MISSING_CASE(). Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-3-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
If we ever get here with TPS3 then intel_dp_training_pattern() is just broken. Replace the careful fallback with just MISSING_CASE(). Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-2-ville.syrjala@linux.intel.com
-
Imre Deak authored
By the specification the 0xF0000 - 0xF02FF range is only valid if the LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support otherwise. Fixes: 7b2a4ab8 ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com
-
Imre Deak authored
By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8 ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com
-
Imre Deak authored
The spec requires to use at least 3.2ms for the AUX timeout period if there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming spec update makes this more specific, by requiring a 3.2ms minimum timeout period for the LTTPR detection reading the 0xF0000-0xF0007 range (3.6.5.1). Accordingly disable LTTPR detection until GLK, where the maximum timeout we can set is only 1.6ms. Link training in the non-transparent mode is known to fail at least on some SKL systems with a WD19 dock on the link, which exposes an LTTPR (see the References below). While this could have different reasons besides the too short AUX timeout used, not detecting LTTPRs (and so not using the non-transparent LT mode) fixes link training on these systems. While at it add a code comment about the platform specific maximum timeout values. v2: Add a comment about the g4x maximum timeout as well. (Ville) Reported-by: Takashi Iwai <tiwai@suse.de> Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com> Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 Fixes: b30edfd8 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Takashi Iwai <tiwai@suse.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
-
Bhaskar Chowdhury authored
s/nothign/nothing/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319043701.14105-1-unixbhaskar@gmail.com
-
- 18 Mar, 2021 15 commits
-
-
Ankit Nautiyal authored
Remove code for resetting frl related members from intel_disable_dp, as this is not applicable for older platforms. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210309043915.1921-3-ankit.k.nautiyal@intel.com
-
Jani Nikula authored
Add intel_bios_encoder_data pointer to encoder, and use it for hdmi and dp iboost. For starters, we only set the encoder->devdata for DDI encoders, i.e. we can only use it for data that is used by DDI encoders. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4bc49244ce68e136e5b21db4c4e6554bec9ac0fb.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Stop caching the information in ddi_port_info. We're phasing out ddi_port_info usage completely, and prefer using the VBT child device information directly using the provided helpers. v2: - Remove supports_typec_usb & supports_tbt from ddi_vbt_port_info (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b04bd183e7554aeb4bc3962af90d63171aa32fc2.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Start using struct intel_bios_encoder_data directly. We'll start sanitizing the child device data directly as well, instead of the cached data in ddi_port_info[]. The one downside here is having to store a non-const pointer back to intel_bios_encoder_data. Eventually we'll be able to have a direct pointer from encoder to intel_bios_encoder_data, removing the need to go through the ddi_port_info[] array altogether. And we'll be able to remove all the cached data in ddi_port_info[]. v2: - Remove supports_dp and supports_edp from ddi_port_info too - Add devdata != NULL check in intel_bios_is_port_edp() Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/061df32a012ff640060920fcd730fb23f8717ee8.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
We'll be needing the intel_bios_encoder_data pointer going forward, and it's just easier to store the higher level pointer in the ddi_vbt_port_info[] array. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/89717516e99afccfecf1a7c6c938b8349f65e985.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
These will be exposed to the rest of the driver and replace other functions. Everything will operate on the child devices. v2: - Rebased, removed stray blank line - Also abstracted intel_bios_encoder_supports_crt (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2bd40ccc093796d16300742d1789d78ffac3c450.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
We'll be needing it in the future. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/026b737b122273d256f4247e9b0c84529aa391fd.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Make the naming suitable for exposing to the rest of the driver as an opaque type. No functional changes. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cb97c858de6e6afa96092db6d96e685fda006984.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Instead of initialing data directly in ddi_port_info array, create fake child devices for default outputs when the VBT is missing. This makes further unification of output handling easier. This will make intel_bios_is_port_present() return true for the fake child devices. This may cause subtle changes in a handful of places. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/91675b40a78bd04bf138598d979661257181880d.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
There are two main cases where the default outputs are useful when the VBT is missing: - There are some DDI-platform Chromebooks out there that do not have a VBT, which worked by coincidence because of the default outputs. The machines need to continue to work. - Early platform enabling when the VBT might not be available. (This could be circumvented by using the i915.vbt_firmware parameter.) Prepare for generating fake child devices for the default outputs by limiting the number of outputs. We don't want to generate excessive amounts of fake child devices. This could be perhaps be limited even more in the future, but match what's possible on all DDI platforms. Note that limiting the defaults to non-TypeC ports in commit 828ccb31 ("drm/i915/icl: Add TypeC ports only if VBT is present") is a more strict limit, and makes this a no-op on recent platforms. v2: Rewrote commit message Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c9c9743af1c7265a2c976d582b7a6685ec0c414.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Pre-DDI and non-CHV aren't using the information created here anyway, so don't bother setting the defaults for them. This should be a non-functional change, but is separated here to catch any regressions in a single commit. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/41526a4eee5fb0de8d7f1ffe4c09965b63ccbaa8.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Unify the code paths at the higher level. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/44559ef456015f65a863c3d89a9bea9157d13a05.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Reduce indent with an early return. No functional changes. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> [Jani: fixed a couple of comment typos while applying.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/17288137452f731a820e737582672f836660a26f.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
We'll be needing the version in more places in the future, so avoid the need to pass it around. No functional changes. v2: Rebased Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c2a4189241bf0946d27e12804b1ba7d098c7d483.1615998927.git.jani.nikula@intel.com
-
Jani Nikula authored
Time to just yank out the bandage. No functional changes. v2: Rebased Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/93fe9e8be2e6120b085d09e49aafdf52f5ccd725.1615998927.git.jani.nikula@intel.com
-