This patch fixes the offset of CPU boot address and changes
the parameter of smc call for SMC_CMD_CPU1BOOT command on
exynos4212.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Pull file locking change from Jeff Layton:
 "Only an email address change to the MAINTAINERS file"

* tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux:
  MAINTAINERS: email address change for Jeff Layton

Pull arm64 fixes from Catalin Marinas:
 "These are mostly arm64 fixes with an additional arm(64) platform fix
  for the initialisation of vexpress clocks (the latter only affecting
  arm64; the arch/arm64 code is SoC agnostic and does not rely on early
  SoC-specific calls)

   - vexpress platform clocks initialisation moved earlier following the
     arm64 move of of_clk_init() call in a previous commit
   - Default DMA ops changed to non-coherent to preserve compatibility
     with 32-bit ARM DT files.  The "dma-coherent" property can be used
     to explicitly mark a device coherent.  The Applied Micro DT file
     has been updated to avoid DMA cache maintenance for the X-Gene SATA
     controller (the only arm64 related driver with such assumption in
     -rc mainline)
   - Fixmap correction for earlyprintk
   - kern_addr_valid() fix for huge pages"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  vexpress: Initialise the sysregs before setting up the clocks
  arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent
  arm64: Use bus notifiers to set per-device coherent DMA ops
  arm64: Make default dma_ops to be noncoherent
  arm64: fixmap: fix missing sub-page offset for earlyprintk
  arm64: Fix for the arm64 kern_addr_valid() function

Pull SCSI fixes from James Bottomley:
 "This is two patches both fixing bugs in drivers (virtio-scsi and
  mpt2sas) causing an oops in certain circumstances"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq
  [SCSI] mpt2sas: Don't disable device twice at suspend.

Following arm64 commit bc3ee18a (arm64: init: Move of_clk_init to
time_init()), vexpress_osc_of_setup() is called via of_clk_init() long
before initcalls are issued. Initialising the vexpress oscillators
requires the vespress sysregs to be already initialised, so this patch
adds an explicit call to vexpress_sysreg_of_early_init() in vexpress
oscillator setup function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Mike Turquette <mturquette@linaro.org>

Since the default DMA ops for arm64 are non-coherent, mark the X-Gene
controller explicitly as dma-coherent to avoid additional cache
maintenance.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Loc Ho <lho@apm.com>

Recently, the default DMA ops have been changed to non-coherent for
alignment with 32-bit ARM platforms (and DT files). This patch adds bus
notifiers to be able to set the coherent DMA ops (with no cache
maintenance) for devices explicitly marked as coherent via the
"dma-coherent" DT property.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently arm64 dma_ops is by default made coherent which makes it
opposite in default policy from arm.

Make default dma_ops to be noncoherent (same as arm), as currently there
aren't any dma-capable drivers which assumes coherent ops
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Commit d57c33c5 (add generic fixmap.h) added (among other
similar things) set_fixmap_io to deal with early ioremap of devices.

More recently, commit bf4b558e (arm64: add early_ioremap support)
converted the arm64 earlyprintk to use set_fixmap_io. A side effect of
this conversion is that my virtual machines have stopped booting when
I pass "earlyprintk=uart8250-8bit,0x3f8" to the guest kernel.

Turns out that the new earlyprintk code doesn't care at all about
sub-page offsets, and just assumes that the earlyprintk device will
be page-aligned. Obviously, that doesn't play well with the above example.

Further investigation shows that set_fixmap_io uses __set_fixmap instead
of __set_fixmap_offset. A fix is to introduce a set_fixmap_offset_io that
uses the latter, and to remove the superflous call to fix_to_virt
(which only returns the value that set_fixmap_io has already given us).

With this applied, my VMs are back in business. Tested on a Cortex-A57
platform with kvmtool as platform emulation.

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Fix for the arm64 kern_addr_valid() function to recognize
virtual addresses in the kernel logical memory map.  The
function fails as written because it does not check whether
the addresses in that region are mapped at the pmd level to
2MB or 512MB pages, continues the page table walk to the
pte level, and issues a garbage value to pfn_valid().

Tested on 4K-page and 64K-page kernels.
Signed-off-by: Dave Anderson <anderson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull irq fixes from Thomas Gleixner:
 "This udpate delivers:

   - A fix for dynamic interrupt allocation on x86 which is required to
     exclude the GSI interrupts from the dynamic allocatable range.

     This was detected with the newfangled tablet SoCs which have GPIOs
     and therefor allocate a range of interrupts.  The MSI allocations
     already excluded the GSI range, so we never noticed before.

   - The last missing set_irq_affinity() repair, which was delayed due
     to testing issues

   - A few bug fixes for the armada SoC interrupt controller

   - A memory allocation fix for the TI crossbar interrupt controller

   - A trivial kernel-doc warning fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: irq-crossbar: Not allocating enough memory
  irqchip: armanda: Sanitize set_irq_affinity()
  genirq: x86: Ensure that dynamic irq allocation does not conflict
  linux/interrupt.h: fix new kernel-doc warnings
  irqchip: armada-370-xp: Fix releasing of MSIs
  irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
  irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable

Pull timer fixes from Thomas Gleixner:
 "This update brings along:

   - Two fixes for long standing bugs in the hrtimer code, one which
     prevents remote enqueuing and the other preventing arbitrary delays
     after a interrupt hang was detected

   - A fix in the timer wheel which prevents math overflow

   - A fix for a long standing issue with the architected ARM timer
     related to the C3STOP mechanism.

   - A trivial compile fix for nspire SoC clocksource"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Prevent overflow in apply_slack
  hrtimer: Prevent remote enqueue of leftmost timers
  hrtimer: Prevent all reprogramming if hang detected
  clocksource: nspire: Fix compiler warning
  clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue

Merge tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "This is a small fix where the trigger code used the wrong
  rcu_dereference().  It required rcu_dereference_sched() instead of the
  normal rcu_dereference().  It produces a nasty RCU lockdep splat due
  to the incorrect rcu notation"
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

* tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use rcu_dereference_sched() for trace event triggers

As trace event triggers are now part of the mainline kernel, I added
my trace event trigger tests to my test suite I run on all my kernels.
Now these tests get run under different config options, and one of
those options is CONFIG_PROVE_RCU, which checks under lockdep that
the rcu locking primitives are being used correctly. This triggered
the following splat:

===============================
[ INFO: suspicious RCU usage. ]
3.15.0-rc2-test+ #11 Not tainted
-------------------------------
kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
4 locks held by swapper/1/0:
 #0:  ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be
 #1:  (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283
 #2:  (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8
 #3:  (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8

stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11
Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
 0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006
 ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20
 0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18
Call Trace:
 <IRQ>  [<ffffffff819f53a5>] dump_stack+0x4f/0x7c
 [<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110
 [<ffffffff810ee51c>] event_triggers_call+0x99/0x108
 [<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4
 [<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c
 [<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff
 [<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61
 [<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8
 [<ffffffff8106eb77>] wake_up_process+0x36/0x3b
 [<ffffffff810575cc>] wake_up_worker+0x24/0x26
 [<ffffffff810578bc>] insert_work+0x5c/0x65
 [<ffffffff81059982>] __queue_work+0x26c/0x283
 [<ffffffff81059999>] ? __queue_work+0x283/0x283
 [<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20
 [<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M
 [<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be
 [<ffffffff81059999>] ? __queue_work+0x283/0x283
 [<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M
 [<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M
 [<ffffffff81046d03>] irq_exit+0x42/0x97
 [<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44
 [<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80
 <EOI>  [<ffffffff8100a5d8>] ? default_idle+0x21/0x32
 [<ffffffff8100a5d6>] ? default_idle+0x1f/0x32
 [<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11
 [<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213
 [<ffffffff8102a23c>] start_secondary+0x212/0x219

The cause is that the triggers are protected by rcu_read_lock_sched() but
the data is dereferenced with rcu_dereference() which expects it to
be protected with rcu_read_lock(). The proper reference should be
rcu_dereference_sched().

Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull ACPI and power management fixes from Rafael Wysocki:
 "A bunch of regression fixes this time.  They fix two regressions in
  the PNP subsystem, one in the ACPI processor driver and one in the
  ACPI EC driver, four cpufreq driver regressions and an unrelated bug
  in one of the drivers.  The regressions are recent or introduced in
  3.14.

  Specifics:

   - There are two bugs in the ACPI PNP core that cause errors to be
     returned if optional ACPI methods are not present.  After an ACPI
     core change made in 3.14 one of those errors leads to serial port
     suspend failures on some systems.  Fix from Rafael J Wysocki.

   - A recently added PNP quirk related to Intel chipsets intorduced a
     build error in unusual configurations (PNP without PCI).  Fix from
     Bjorn Helgaas.

   - An ACPI EC workaround related to system suspend on Samsung machines
     added in 3.14 introduced a race causing some valid EC events to be
     discarded.  Fix from Kieran Clancy.

   - The acpi-cpufreq driver fails to load on some systems after a 3.14
     commit related to APIC ID parsing that overlooked one corner case.
     Fix from Lan Tianyu.

   - Fix for a recently introduced build problem in the ppc-corenet
     cpufreq driver from Tim Gardner.

   - A recent cpufreq core change to ensure serialization of frequency
     transitions for drivers with a ->target_index() callback overlooked
     the fact that some of those drivers had been doing operations
     introduced by it into the core already by themselves.  That
     resulted in a mess in which the core and the drivers try to do the
     same thing and block each other which leads to deadlocks.  Fixes
     for the powernow-k7, powernow-k6, and longhaul cpufreq drivers from
     Srivatsa S Bhat.

   - Fix for a computational error in the powernow-k6 cpufreq driver
     from Srivatsa S Bhat"

* tag 'pm+acpi-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / processor: Fix failure of loading acpi-cpufreq driver
  PNP / ACPI: Do not return errors if _DIS or _SRS are not present
  PNP: Fix compile error in quirks.c
  ACPI / EC: Process rather than discard events in acpi_ec_clear
  cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error
  cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end
  cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end
  cpufreq: powernow-k6: Fix incorrect comparison with max_multipler
  cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end

Pull driver core deferred probe fix from Grant Likely:
 "Drivercore race condition fix (exposed by devicetree)

  This branch fixes a bug where a device can get stuck in the deferred
  list even though all its dependencies are met.  The bug has existed
  for a long time, but new platform conversions to device tree have
  exposed it.  This patch is needed to get those platforms working.

  This was the pending bug fix I mentioned in my previous pull request.
  Normally this would go through Greg's tree seeing that it is a
  drivercore change, but devicetree exposes the problem.  I've discussed
  with Greg and he okayed me asking you to pull directly"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  drivercore: deferral race condition fix

* acpi-ec:
  ACPI / EC: Process rather than discard events in acpi_ec_clear

* acpi-processor:
  ACPI / processor: Fix failure of loading acpi-cpufreq driver

* pnp:
  PNP / ACPI: Do not return errors if _DIS or _SRS are not present
  PNP: Fix compile error in quirks.c

* pm-cpufreq:
  cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error
  cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end
  cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end
  cpufreq: powernow-k6: Fix incorrect comparison with max_multipler
  cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end

Pull device mapper fixes from Mike Snitzer:
 "A few dm-thinp fixes for changes merged in 3.15-rc1.

  A dm-verity fix for an immutable biovec regression that affects 3.14+.

  A dm-cache fix to properly quiesce when using writethrough mode (3.14+)"

* tag 'dm-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix writethrough mode quiescing in cache_map
  dm thin: use INIT_WORK_ONSTACK in noflush_work to avoid ODEBUG warning
  dm verity: fix biovecs hash calculation regression
  dm thin: fix rcu_read_lock being held in code that can sleep
  dm thin: irqsave must always be used with the pool->lock spinlock

Pull x86 fixes from Peter Anvin:
 "Two very small changes: one fix for the vSMP Foundation platform, and
  one to help LLVM not choke on options it doesn't understand (although
  it probably should)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix irq routing
  x86: LLVMLinux: Wrap -mno-80387 with cc-option

Pull KVM fixes from Paolo Bonzini:
 - Fix for a Haswell regression in nested virtualization, introduced
   during the merge window.
 - A fix from Oleg to async page faults.
 - A bunch of small ARM changes.
 - A trivial patch to use the new MSI-X API introduced during the merge
   window.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address.
  KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses
  KVM: async_pf: mm->mm_users can not pin apf->mm
  KVM: ARM: vgic: Fix sgi dispatch problem
  MAINTAINERS: co-maintainance of KVM/{arm,arm64}
  arm: KVM: fix possible misalignment of PGDs and bounce page
  KVM: x86: Check for host supported fields in shadow vmcs
  kvm: Use pci_enable_msix_exact() instead of pci_enable_msix()
  ARM: KVM: disable KVM in Kconfig on big-endian systems

Pull s390 fixes from Martin Schwidefsky:
 "Two bug fixes, one to fix a potential information leak in the BPF jit
  and common-io-layer fix for old firmware levels"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/bpf,jit: initialize A register if 1st insn is BPF_S_LDX_B_MSH
  s390/chsc: fix SEI usage on old FW levels

Pull infiniband/rdma fixes from Roland Dreier:
 "cxgb4 hardware driver fixes"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cxgb4: Update Kconfig to include Chelsio T5 adapter
  RDMA/cxgb4: Only allow kernel db ringing for T4 devs
  RDMA/cxgb4: Force T5 connections to use TAHOE congestion control
  RDMA/cxgb4: Fix endpoint mutex deadlocks

Pull parisc fixes from Helge Deller:
 "Drop the architecture-specifc value for_STK_LIM_MAX to fix stack
  related problems with GNU make"

* 'parisc-3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use generic uapi/asm/resource.h file
  parisc: remove _STK_LIM_MAX override

Commit 2ee57d58 ("dm cache: add passthrough mode") inadvertently
removed the deferred set reference that was taken in cache_map()'s
writethrough mode support.  Restore taking this reference.

This issue was found with code inspection.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org # 3.13+

Pull pin control fixes from Linus Walleij:
 "Here is a small set of pin control fixes for the v3.15 series.  All
  are individual driver fixes and quite self-contained.  One of them
  tagged for stable.

   - Signedness bug in the TB10x

   - GPIO inversion fix for the AS3722

   - Clear pending pin interrups enabled in the bootloader in the
     pinctrl-single driver

   - Minor pin definition fixes for the PFC/Renesas driver"

* tag 'pinctrl-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  sh-pfc: r8a7791: Fix definition of MOD_SEL3
  sh-pfc: r8a7790: Fix definition of IPSR5
  pinctrl: single: Clear pin interrupts enabled by bootloader
  pinctrl: as3722: fix handling of GPIO invert bit
  pinctrl/TB10x: Fix signedness bug

Pull module fixes from Rusty Russell:
 "Fixed one missing place for the new taint flag, and remove a warning
  giving only false positives (now we finally figured out why)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: remove warning about waiting module removal.
  Fix: tracing: use 'E' instead of 'X' for unsigned module taint flag

Signed-off-by: Helge Deller <deller@gmx.de>

There are only a couple of architectures that override _STK_LIM_MAX to
a non-infinity value. This changes the stack allocation semantics in
subtle ways. For example, GNU make changes its stack allocation to the
hard maximum defined by _STK_LIM_MAX. As a results, threads executed
by processes running under make are allocated a stack size of
_STK_LIM_MAX rather than a sensible default value. This causes various
thread stress tests to fail when they can't muster more than about 50
threads.

The attached change implements the default behavior used by the
majority of architectures.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
Cc: stable@vger.kernel.org # 3.14
Signed-off-by: Helge Deller <deller@gmx.de>

Commit 93ea02bb ("arch: Clean up asm/barrier.h implementations")
wired generic barrier.h for hexagon, but failed to delete the existing
file.

Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus an Intel RAPL PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tests x86: Fix stack map lookup in dwarf unwind test
  perf x86: Fix perf to use non-executable stack, again
  perf tools: Remove extra '/' character in events file path
  perf machine: Search for modules in %s/lib/modules/%s
  perf tests: Add static build make test
  perf tools: Fix bfd dependency libraries detection
  perf tools: Use LDFLAGS instead of ALL_LDFLAGS
  perf/x86: Fix RAPL rdmsrl_safe() usage
  tools lib traceevent: Fix memory leak in pretty_print()
  tools lib traceevent: Fix backward compatibility macros for pevent filter enums
  perf tools: Disable libdw unwind for all but x86 arch
  perf tests x86: Fix memory leak in sample_ustack()

Pull hwmon fix from Guenter Roeck:
 "Fix Tjmax detection in coretemp driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  Revert "hwmon: (coretemp) Refine TjMax detection"

This is simpler and cleaner.  Depending on architecture, a smart
compiler may or may not generate the same code.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull aio fixes from Ben LaHaise:
 "The first change from Anatol fixes a regression where io_destroy() no
  longer waits for outstanding aios to complete.  The second corrects a
  memory leak in an error path for vectored aio operations.

  Both of these bug fixes should be queued up for stable as well"

* git://git.kvack.org/~bcrl/aio-fixes:
  aio: fix potential leak in aio_run_iocb().
  aio: block io_destroy() until all context requests are completed

iovec should be reclaimed whenever caller of rw_copy_check_uvector() returns,
but it doesn't hold when failure happens right after aio_setup_vectored_rw().

Fix that in a such way to avoid hairy goto.
Signed-off-by: Leon Yu <chianglungyu@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org

This reverts commit 9fb6c9c7.

Tjmax on some Intel CPUs is below 85 degrees C. One known example is
L5630 with Tjmax of 71 degrees C. There are other Xeon processors with
Tjmax of 70 or 80 degrees C. Also, the Intel IA32 System Programming
document states that the temperature target is in bits 23:16 of MSR 0x1a2
(MSR_TEMPERATURE_TARGET), which is 8 bits, not 7.

So even if turbostat uses similar checks to validate Tjmax, there is no
evidence that the checks are actually required. On the contrary, the
checks are known to cause problems and therefore need to be removed.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75071.

Fixes: 9fb6c9c7 hwmon: (coretemp) Refine TjMax detection
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent

Pull perf/urgent fixes from Jiri Olsa:

  * Fix perf to use non-executable stack, again (Mathias Krause)

  * Remove extra '/' character in events file path (Xia Kaixu)

  * Search for modules in %s/lib/modules/%s (Richard Yao)

  * Build related fixies plus static build test (Jiri Olsa)

  * Fix stack map lookup in dwarf unwind test (Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

According commit d640113f (ACPI: processor: fix acpi_get_cpuid for UP
processor),  BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
always returns -1. For these cases, original code will pass apic_id with
vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
is equal to zero, ignores apic_id and return zero for CPU0.

Commit b981513f (ACPI / scan: bail out early if failed to parse APIC
ID for CPU) changed the behavior. Return ENODEV when find apic_id is
less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
driver fails to be loaded on some machines. This patch is to fix it.

Fixes: b981513f (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Reported-and-tested-by: KATO Hiroshi <katoh@mikage.ne.jp>
Reported-and-tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>