1. 30 Nov, 2013 12 commits
    • Arvid Brodin's avatar
      net/hsr: Support iproute print_opt ('ip -details ...') · 98bf8362
      Arvid Brodin authored
      This implements the rtnl_link_ops fill_info routine for HSR.
      Signed-off-by: default avatarArvid Brodin <arvid.brodin@alten.se>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98bf8362
    • Arvid Brodin's avatar
      213e3bc7
    • Arvid Brodin's avatar
      19990e29
    • Hannes Frederic Sowa's avatar
      ipv6: fix possible seqlock deadlock in ip6_finish_output2 · 7f88c6b2
      Hannes Frederic Sowa authored
      IPv6 stats are 64 bits and thus are protected with a seqlock. By not
      disabling bottom-half we could deadlock here if we don't disable bh and
      a softirq reentrantly updates the same mib.
      
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7f88c6b2
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net · 696701b8
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      Intel Wired LAN Driver Updates
      
      This series contains updates to igb, e1000 and ixgbe.
      
      Akeem provides a igb fix where WOL was being reported as supported on
      some ethernet devices which did not have that capability.
      
      Yanjun provides a fix for e1000 which is similar to a previous fix
      for e1000e commit bb9e44d0 ("e1000e: prevent oops when adapter is
      being closed and reset simultaneously"), where the same issue was
      observed on the older e1000 cards.
      
      Vladimir Davydov provides 2 e1000 fixes.  The first fixes a lockdep
      warning e1000_down() tries to synchronously cancel e1000 auxiliary
      works (reset_task, watchdog_task, phy_info_task and fifo_stall_task)
      which take adapter->mutex in their handlers.  The second patch is to
      fix a possible race condition where reset_task() would be running
      after adapter down.
      
      John provides 2 fixes for ixgbe.  First turns ixgbe_fwd_ring_down
      to static and the second disables NETIF_F_HW_L2FW_DOFFLOAD by default
      because it allows upper layer net devices to use queues in the hardware
      to directly submit and receive skbs.
      
      Mark Rustad provides a single patch for ixgbe to make
      ixgbe_identify_qsfp_module_generic static to resolve compile
      warnings.
      
      v2: Drop igb patch "igb: Update queue reinit function to call dev_close
          when init of queues fails" from Carolyn, so that the solution can
          be re-worked based on feedback from David Miller.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      696701b8
    • Mark Rustad's avatar
      ixgbe: Make ixgbe_identify_qsfp_module_generic static · 88217547
      Mark Rustad authored
      Correct a namespace complaint by making the function static
      and moving the prototype into the .c file.
      Signed-off-by: default avatarMark Rustad <mark.d.rustad@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      88217547
    • John Fastabend's avatar
      ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default · 8bf1264d
      John Fastabend authored
      NETIF_F_HW_L2FW_DOFFLOAD allows upper layer net devices such
      as macvlan to use queues in the hardware to directly submit and
      receive skbs.
      
      This creates a subtle change in the datapath though. One change
      being the skb may no longer use the root devices qdisc.
      
      Because users may not expect this we can't enable the feature
      by default unless the hardware can offload all the software
      functionality above it. So for now disable it by default and
      let users opt in.
      Signed-off-by: default avatarJohn Fastabend <john.r.fastabend@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      8bf1264d
    • John Fastabend's avatar
      ixgbe: ixgbe_fwd_ring_down needs to be static · ae72c8d0
      John Fastabend authored
      When compiling with -Wstrict-prototypes gcc catches a static
      I missed.
      
      ./ixgbe_main.c:4254: warning: no previous prototype for 'ixgbe_fwd_ring_down'
      Reported-by: default avatarPhillip Schmitt <phillip.j.schmitt@intel.com>
      Signed-off-by: default avatarJohn Fastabend <john.r.fastabend@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      ae72c8d0
    • Vladimir Davydov's avatar
      e1000: fix possible reset_task running after adapter down · 74a1b1ea
      Vladimir Davydov authored
      On e1000_down(), we should ensure every asynchronous work is canceled
      before proceeding. Since the watchdog_task can schedule other works
      apart from itself, it should be stopped first, but currently it is
      stopped after the reset_task. This can result in the following race
      leading to the reset_task running after the module unload:
      
      e1000_down_and_stop():			e1000_watchdog():
      ----------------------			-----------------
      
      cancel_work_sync(reset_task)
      					schedule_work(reset_task)
      cancel_delayed_work_sync(watchdog_task)
      
      The patch moves cancel_delayed_work_sync(watchdog_task) at the beginning
      of e1000_down_and_stop() thus ensuring the race is impossible.
      
      Cc: Tushar Dave <tushar.n.dave@intel.com>
      Cc: Patrick McHardy <kaber@trash.net>
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      74a1b1ea
    • Vladimir Davydov's avatar
      e1000: fix lockdep warning in e1000_reset_task · b2f963bf
      Vladimir Davydov authored
      The patch fixes the following lockdep warning, which is 100%
      reproducible on network restart:
      
      ======================================================
      [ INFO: possible circular locking dependency detected ]
      3.12.0+ #47 Tainted: GF
      -------------------------------------------------------
      kworker/1:1/27 is trying to acquire lock:
       ((&(&adapter->watchdog_task)->work)){+.+...}, at: [<ffffffff8108a5b0>] flush_work+0x0/0x70
      
      but task is already holding lock:
       (&adapter->mutex){+.+...}, at: [<ffffffffa0177c0a>] e1000_reset_task+0x4a/0xa0 [e1000]
      
      which lock already depends on the new lock.
      
      the existing dependency chain (in reverse order) is:
      
      -> #1 (&adapter->mutex){+.+...}:
             [<ffffffff810bdb5d>] lock_acquire+0x9d/0x120
             [<ffffffff816b8cbc>] mutex_lock_nested+0x4c/0x390
             [<ffffffffa017233d>] e1000_watchdog+0x7d/0x5b0 [e1000]
             [<ffffffff8108b972>] process_one_work+0x1d2/0x510
             [<ffffffff8108ca80>] worker_thread+0x120/0x3a0
             [<ffffffff81092c1e>] kthread+0xee/0x110
             [<ffffffff816c3d7c>] ret_from_fork+0x7c/0xb0
      
      -> #0 ((&(&adapter->watchdog_task)->work)){+.+...}:
             [<ffffffff810bd9c0>] __lock_acquire+0x1710/0x1810
             [<ffffffff810bdb5d>] lock_acquire+0x9d/0x120
             [<ffffffff8108a5eb>] flush_work+0x3b/0x70
             [<ffffffff8108b5d8>] __cancel_work_timer+0x98/0x140
             [<ffffffff8108b693>] cancel_delayed_work_sync+0x13/0x20
             [<ffffffffa0170cec>] e1000_down_and_stop+0x3c/0x60 [e1000]
             [<ffffffffa01775b1>] e1000_down+0x131/0x220 [e1000]
             [<ffffffffa0177c12>] e1000_reset_task+0x52/0xa0 [e1000]
             [<ffffffff8108b972>] process_one_work+0x1d2/0x510
             [<ffffffff8108ca80>] worker_thread+0x120/0x3a0
             [<ffffffff81092c1e>] kthread+0xee/0x110
             [<ffffffff816c3d7c>] ret_from_fork+0x7c/0xb0
      
      other info that might help us debug this:
      
       Possible unsafe locking scenario:
      
             CPU0                    CPU1
             ----                    ----
        lock(&adapter->mutex);
                                     lock((&(&adapter->watchdog_task)->work));
                                     lock(&adapter->mutex);
        lock((&(&adapter->watchdog_task)->work));
      
       *** DEADLOCK ***
      
      3 locks held by kworker/1:1/27:
       #0:  (events){.+.+.+}, at: [<ffffffff8108b906>] process_one_work+0x166/0x510
       #1:  ((&adapter->reset_task)){+.+...}, at: [<ffffffff8108b906>] process_one_work+0x166/0x510
       #2:  (&adapter->mutex){+.+...}, at: [<ffffffffa0177c0a>] e1000_reset_task+0x4a/0xa0 [e1000]
      
      stack backtrace:
      CPU: 1 PID: 27 Comm: kworker/1:1 Tainted: GF            3.12.0+ #47
      Hardware name: System manufacturer System Product Name/P5B-VM SE, BIOS 0501    05/31/2007
      Workqueue: events e1000_reset_task [e1000]
       ffffffff820f6000 ffff88007b9dba98 ffffffff816b54a2 0000000000000002
       ffffffff820f5e50 ffff88007b9dbae8 ffffffff810ba936 ffff88007b9dbac8
       ffff88007b9dbb48 ffff88007b9d8f00 ffff88007b9d8780 ffff88007b9d8f00
      Call Trace:
       [<ffffffff816b54a2>] dump_stack+0x49/0x5f
       [<ffffffff810ba936>] print_circular_bug+0x216/0x310
       [<ffffffff810bd9c0>] __lock_acquire+0x1710/0x1810
       [<ffffffff8108a5b0>] ? __flush_work+0x250/0x250
       [<ffffffff810bdb5d>] lock_acquire+0x9d/0x120
       [<ffffffff8108a5b0>] ? __flush_work+0x250/0x250
       [<ffffffff8108a5eb>] flush_work+0x3b/0x70
       [<ffffffff8108a5b0>] ? __flush_work+0x250/0x250
       [<ffffffff8108b5d8>] __cancel_work_timer+0x98/0x140
       [<ffffffff8108b693>] cancel_delayed_work_sync+0x13/0x20
       [<ffffffffa0170cec>] e1000_down_and_stop+0x3c/0x60 [e1000]
       [<ffffffffa01775b1>] e1000_down+0x131/0x220 [e1000]
       [<ffffffffa0177c12>] e1000_reset_task+0x52/0xa0 [e1000]
       [<ffffffff8108b972>] process_one_work+0x1d2/0x510
       [<ffffffff8108b906>] ? process_one_work+0x166/0x510
       [<ffffffff8108ca80>] worker_thread+0x120/0x3a0
       [<ffffffff8108c960>] ? manage_workers+0x2c0/0x2c0
       [<ffffffff81092c1e>] kthread+0xee/0x110
       [<ffffffff81092b30>] ? __init_kthread_worker+0x70/0x70
       [<ffffffff816c3d7c>] ret_from_fork+0x7c/0xb0
       [<ffffffff81092b30>] ? __init_kthread_worker+0x70/0x70
      
      == The issue background ==
      
      The problem occurs, because e1000_down(), which is called under
      adapter->mutex by e1000_reset_task(), tries to synchronously cancel
      e1000 auxiliary works (reset_task, watchdog_task, phy_info_task,
      fifo_stall_task), which take adapter->mutex in their handlers. So the
      question is what does adapter->mutex protect there?
      
      The adapter->mutex was introduced by commit 0ef4ee ("e1000: convert to
      private mutex from rtnl") as a replacement for rtnl_lock() taken in the
      asynchronous handlers. It targeted on fixing a similar lockdep warning
      issued when e1000_down() was called under rtnl_lock(), and it fixed it,
      but unfortunately it introduced the lockdep warning described above.
      Anyway, that said the source of this bug is that the asynchronous works
      were made to take rtnl_lock() some time ago, so let's look deeper and
      find why it was added there.
      
      The rtnl_lock() was added to asynchronous handlers by commit 338c15
      ("e1000: fix occasional panic on unload") in order to prevent
      asynchronous handlers from execution after the module is unloaded
      (e1000_down() is called) as it follows from the comment to the commit:
      
      > Net drivers in general have an issue where timers fired
      > by mod_timer or work threads with schedule_work are running
      > outside of the rtnl_lock.
      >
      > With no other lock protection these routines are vulnerable
      > to races with driver unload or reset paths.
      >
      > The longer term solution to this might be a redesign with
      > safer locks being taken in the driver to guarantee no
      > reentrance, but for now a safe and effective fix is
      > to take the rtnl_lock in these routines.
      
      I'm not sure if this locking scheme fixed the problem or just made it
      unlikely, although I incline to the latter. Anyway, this was long time
      ago when e1000 auxiliary works were implemented as timers scheduling
      real work handlers in their routines. The e1000_down() function only
      canceled the timers, but left the real handlers running if they were
      running, which could result in work execution after module unload.
      Today, the e1000 driver uses sane delayed works instead of the pair
      timer+work to implement its delayed asynchronous handlers, and the
      e1000_down() synchronously cancels all the works so that the problem
      that commit 338c15 tried to cope with disappeared, and we don't need any
      locks in the handlers any more. Moreover, any locking there can
      potentially result in a deadlock.
      
      So, this patch reverts commits 0ef4ee and 338c15.
      
      Fixes: 0ef4eedc ("e1000: convert to private mutex from rtnl")
      Fixes: 338c15e4 ("e1000: fix occasional panic on unload")
      Cc: Tushar Dave <tushar.n.dave@intel.com>
      Cc: Patrick McHardy <kaber@trash.net>
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      b2f963bf
    • yzhu1's avatar
      e1000: prevent oops when adapter is being closed and reset simultaneously · 6a7d64e3
      yzhu1 authored
      This change is based on a similar change made to e1000e support in
      commit bb9e44d0 ("e1000e: prevent oops when adapter is being closed
      and reset simultaneously").  The same issue has also been observed
      on the older e1000 cards.
      
      Here, we have increased the RESET_COUNT value to 50 because there are too
      many accesses to e1000 nic on stress tests to e1000 nic, it is not enough
      to set RESET_COUT 25. Experimentation has shown that it is enough to set
      RESET_COUNT 50.
      Signed-off-by: default avataryzhu1 <yanjun.zhu@windriver.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      6a7d64e3
    • Akeem G Abodunrin's avatar
      igb: Fixed Wake On LAN support · 42ce4126
      Akeem G Abodunrin authored
      This patch fixes Wake on LAN being reported as supported on some Ethernet
      ports, in contrary to Hardware capability.
      Signed-off-by: default avatarAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      42ce4126
  2. 29 Nov, 2013 12 commits
    • Eric Dumazet's avatar
      inet: fix possible seqlock deadlocks · f1d8cba6
      Eric Dumazet authored
      In commit c9e90429 ("ipv4: fix possible seqlock deadlock") I left
      another places where IP_INC_STATS_BH() were improperly used.
      
      udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from
      process context, not from softirq context.
      
      This was detected by lockdep seqlock support.
      Reported-by: default avatarjongman heo <jongman.heo@samsung.com>
      Fixes: 584bdf8c ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP")
      Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f1d8cba6
    • Jiri Pirko's avatar
      team: fix master carrier set when user linkup is enabled · f5e0d343
      Jiri Pirko authored
      When user linkup is enabled and user sets linkup of individual port,
      we need to recompute linkup (carrier) of master interface so the change
      is reflected. Fix this by calling __team_carrier_check() which does the
      needed work.
      
      Please apply to all stable kernels as well. Thanks.
      Reported-by: default avatarJan Tluka <jtluka@redhat.com>
      Signed-off-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f5e0d343
    • Shawn Landden's avatar
      net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST · d3f7d56a
      Shawn Landden authored
      Commit 35f9c09f (tcp: tcp_sendpages() should call tcp_push() once)
      added an internal flag MSG_SENDPAGE_NOTLAST, similar to
      MSG_MORE.
      
      algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages()
      and need to see the new flag as identical to MSG_MORE.
      
      This fixes sendfile() on AF_ALG.
      
      v3: also fix udp
      
      Cc: Tom Herbert <therbert@google.com>
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: <stable@vger.kernel.org> # 3.4.x + 3.2.x
      Reported-and-tested-by: default avatarShawn Landden <shawnlandden@gmail.com>
      Original-patch: Richard Weinberger <richard@nod.at>
      Signed-off-by: default avatarShawn Landden <shawn@churchofgit.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3f7d56a
    • Guenter Roeck's avatar
      sfc: Convert to use hwmon_device_register_with_groups · 85493e6d
      Guenter Roeck authored
      Simplify the code. Avoid race conditions caused by attributes
      being created after hwmon device registration. Implicitly
      (through hwmon API) add mandatory 'name' sysfs attribute.
      Reviewed-by: default avatarBen Hutchings <bhutchings@solarflare.com>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      85493e6d
    • Linus Walleij's avatar
      net: smc91: fix crash regression on the versatile · a0c20fb0
      Linus Walleij authored
      After commit e9e4ea74
      "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
      The Versatile SMSC LAN91C111 is crashing like this:
      
      ------------[ cut here ]------------
      kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
      Internal error: Oops - BUG: 0 [#1] ARM
      Modules linked in:
      CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
      task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000
      PC is at smc_hardware_send_pkt+0x198/0x22c
      LR is at smc_hardware_send_pkt+0x24/0x22c
      pc : [<c01be324>]    lr : [<c01be1b0>]    psr: 20000013
      sp : c6cd1d08  ip : 00000001  fp : 00000000
      r10: c02adb08  r9 : 00000000  r8 : c6ced802
      r7 : c786fba0  r6 : 00000146  r5 : c8800000  r4 : c78d6000
      r3 : 0000000f  r2 : 00000146  r1 : 00000000  r0 : 00000031
      Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
      Control: 0005317f  Table: 06cf4000  DAC: 00000015
      Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
      Stack: (0xc6cd1d08 to 0xc6cd2000)
      1d00:                   00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
      1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
      1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
      1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
      1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
      1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
      1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
      1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
      1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
      1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
      1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
      1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
      1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
      1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
      1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
      1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
      1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
      1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
      1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
      1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
      1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
      1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
      1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
      [<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
      [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
      [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c)
      [<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c)
      [<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28)
      [<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8)
      [<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc)
      [<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c)
      Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2)
      ---[ end trace 81104fe70e8da7fe ]---
      Kernel panic - not syncing: Fatal exception in interrupt
      
      This is because the macro operations in smc91x.h defined
      for Versatile are missing SMC_outsw() as used in this
      commit.
      
      The Versatile needs and uses the same accessors as the other
      platforms in the first if(...) clause, just switch it to using
      that and we have one problem less to worry about.
      
      This includes a hunk of a patch from Will Deacon fixin
      the other 32bit platforms as well: Innokom, Ramses, PXA,
      PCM027.
      
      Checkpatch complains about spacing, but I have opted to
      follow the style of this .h-file.
      
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Nicolas Pitre <nico@fluxnic.net>
      Cc: Eric Miao <eric.y.miao@gmail.com>
      Cc: Jonathan Cameron <jic23@cam.ac.uk>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0c20fb0
    • David S. Miller's avatar
      Revert "net: smc91: fix crash regression on the versatile" · 9d38d28b
      David S. Miller authored
      This reverts commit b268daff.
      
      I applied the wrong version of this patch, the proper version
      is coming up next.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9d38d28b
    • Linus Walleij's avatar
      net: smc91: fix crash regression on the versatile · b268daff
      Linus Walleij authored
      After commit e9e4ea74
      "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
      The Versatile SMSC LAN91C111 is crashing like this:
      
      ------------[ cut here ]------------
      kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
      Internal error: Oops - BUG: 0 [#1] ARM
      Modules linked in:
      CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
      task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000
      PC is at smc_hardware_send_pkt+0x198/0x22c
      LR is at smc_hardware_send_pkt+0x24/0x22c
      pc : [<c01be324>]    lr : [<c01be1b0>]    psr: 20000013
      sp : c6cd1d08  ip : 00000001  fp : 00000000
      r10: c02adb08  r9 : 00000000  r8 : c6ced802
      r7 : c786fba0  r6 : 00000146  r5 : c8800000  r4 : c78d6000
      r3 : 0000000f  r2 : 00000146  r1 : 00000000  r0 : 00000031
      Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
      Control: 0005317f  Table: 06cf4000  DAC: 00000015
      Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
      Stack: (0xc6cd1d08 to 0xc6cd2000)
      1d00:                   00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
      1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
      1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
      1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
      1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
      1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
      1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
      1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
      1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
      1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
      1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
      1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
      1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
      1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
      1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
      1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
      1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
      1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
      1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
      1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
      1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
      1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
      1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
      [<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
      [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
      [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c)
      [<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c)
      [<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28)
      [<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8)
      [<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc)
      [<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c)
      Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2)
      ---[ end trace 81104fe70e8da7fe ]---
      Kernel panic - not syncing: Fatal exception in interrupt
      
      This is because the macro operations in smc91x.h defined
      for Versatile are missing SMC_outsw() as used in this
      commit.
      
      The Versatile needs and uses the same accessors as the other
      platforms in the first if(...) clause, just switch it to using
      that and we have one problem less to worry about.
      
      Checkpatch complains about spacing, but I have opted to
      follow the style of this .h-file.
      
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Nicolas Pitre <nico@fluxnic.net>
      Cc: Eric Miao <eric.y.miao@gmail.com>
      Cc: Jonathan Cameron <jic23@cam.ac.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b268daff
    • Yang Yingliang's avatar
      net: 8139cp: fix a BUG_ON triggered by wrong bytes_compl · 7fe0ee09
      Yang Yingliang authored
      Using iperf to send packets(GSO mode is on), a bug is triggered:
      
      [  212.672781] kernel BUG at lib/dynamic_queue_limits.c:26!
      [  212.673396] invalid opcode: 0000 [#1] SMP
      [  212.673882] Modules linked in: 8139cp(O) nls_utf8 edd fuse loop dm_mod ipv6 i2c_piix4 8139too i2c_core intel_agp joydev pcspkr hid_generic intel_gtt floppy sr_mod mii button sg cdrom ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif crct10dif_common processor thermal_sys hwmon scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh ata_generic ata_piix libata scsi_mod [last unloaded: 8139cp]
      [  212.676084] CPU: 0 PID: 4124 Comm: iperf Tainted: G           O 3.12.0-0.7-default+ #16
      [  212.676084] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
      [  212.676084] task: ffff8800d83966c0 ti: ffff8800db4c8000 task.ti: ffff8800db4c8000
      [  212.676084] RIP: 0010:[<ffffffff8122e23f>]  [<ffffffff8122e23f>] dql_completed+0x17f/0x190
      [  212.676084] RSP: 0018:ffff880116e03e30  EFLAGS: 00010083
      [  212.676084] RAX: 00000000000005ea RBX: 0000000000000f7c RCX: 0000000000000002
      [  212.676084] RDX: ffff880111dd0dc0 RSI: 0000000000000bd4 RDI: ffff8800db6ffcc0
      [  212.676084] RBP: ffff880116e03e48 R08: 0000000000000992 R09: 0000000000000000
      [  212.676084] R10: ffffffff8181e400 R11: 0000000000000004 R12: 000000000000000f
      [  212.676084] R13: ffff8800d94ec840 R14: ffff8800db440c80 R15: 000000000000000e
      [  212.676084] FS:  00007f6685a3c700(0000) GS:ffff880116e00000(0000) knlGS:0000000000000000
      [  212.676084] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  212.676084] CR2: 00007f6685ad6460 CR3: 00000000db714000 CR4: 00000000000006f0
      [  212.676084] Stack:
      [  212.676084]  ffff8800db6ffc00 000000000000000f ffff8800d94ec840 ffff880116e03eb8
      [  212.676084]  ffffffffa041509f ffff880116e03e88 0000000f16e03e88 ffff8800d94ec000
      [  212.676084]  00000bd400059858 000000050000000f ffffffff81094c36 ffff880116e03eb8
      [  212.676084] Call Trace:
      [  212.676084]  <IRQ>
      [  212.676084]  [<ffffffffa041509f>] cp_interrupt+0x4ef/0x590 [8139cp]
      [  212.676084]  [<ffffffff81094c36>] ? ktime_get+0x56/0xd0
      [  212.676084]  [<ffffffff8108cf73>] handle_irq_event_percpu+0x53/0x170
      [  212.676084]  [<ffffffff8108d0cc>] handle_irq_event+0x3c/0x60
      [  212.676084]  [<ffffffff8108fdb5>] handle_fasteoi_irq+0x55/0xf0
      [  212.676084]  [<ffffffff810045df>] handle_irq+0x1f/0x30
      [  212.676084]  [<ffffffff81003c8b>] do_IRQ+0x5b/0xe0
      [  212.676084]  [<ffffffff8142beaa>] common_interrupt+0x6a/0x6a
      [  212.676084]  <EOI>
      [  212.676084]  [<ffffffffa0416a21>] ? cp_start_xmit+0x621/0x97c [8139cp]
      [  212.676084]  [<ffffffffa0416a09>] ? cp_start_xmit+0x609/0x97c [8139cp]
      [  212.676084]  [<ffffffff81378ed9>] dev_hard_start_xmit+0x2c9/0x550
      [  212.676084]  [<ffffffff813960a9>] sch_direct_xmit+0x179/0x1d0
      [  212.676084]  [<ffffffff813793f3>] dev_queue_xmit+0x293/0x440
      [  212.676084]  [<ffffffff813b0e46>] ip_finish_output+0x236/0x450
      [  212.676084]  [<ffffffff810e59e7>] ? __alloc_pages_nodemask+0x187/0xb10
      [  212.676084]  [<ffffffff813b10e8>] ip_output+0x88/0x90
      [  212.676084]  [<ffffffff813afa64>] ip_local_out+0x24/0x30
      [  212.676084]  [<ffffffff813aff0d>] ip_queue_xmit+0x14d/0x3e0
      [  212.676084]  [<ffffffff813c6fd1>] tcp_transmit_skb+0x501/0x840
      [  212.676084]  [<ffffffff813c8323>] tcp_write_xmit+0x1e3/0xb20
      [  212.676084]  [<ffffffff81363237>] ? skb_page_frag_refill+0x87/0xd0
      [  212.676084]  [<ffffffff813c8c8b>] tcp_push_one+0x2b/0x40
      [  212.676084]  [<ffffffff813bb7e6>] tcp_sendmsg+0x926/0xc90
      [  212.676084]  [<ffffffff813e1d21>] inet_sendmsg+0x61/0xc0
      [  212.676084]  [<ffffffff8135e861>] sock_aio_write+0x101/0x120
      [  212.676084]  [<ffffffff81107cf1>] ? vma_adjust+0x2e1/0x5d0
      [  212.676084]  [<ffffffff812163e0>] ? timerqueue_add+0x60/0xb0
      [  212.676084]  [<ffffffff81130b60>] do_sync_write+0x60/0x90
      [  212.676084]  [<ffffffff81130d44>] ? rw_verify_area+0x54/0xf0
      [  212.676084]  [<ffffffff81130f66>] vfs_write+0x186/0x190
      [  212.676084]  [<ffffffff811317fd>] SyS_write+0x5d/0xa0
      [  212.676084]  [<ffffffff814321e2>] system_call_fastpath+0x16/0x1b
      [  212.676084] Code: ca 41 89 dc 41 29 cc 45 31 db 29 c2 41 89 c5 89 d0 45 29 c5 f7 d0 c1 e8 1f e9 43 ff ff ff 66 0f 1f 44 00 00 31 c0 e9 7b ff ff ff <0f> 0b eb fe 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 c7 47 40 00
      [  212.676084] RIP  [<ffffffff8122e23f>] dql_completed+0x17f/0x190
      ------------[ cut here ]------------
      
      When a skb has frags, bytes_compl plus skb->len nr_frags times in cp_tx().
      It's not the correct value(actually, it should plus skb->len once) and it
      will trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed).
      So only increase bytes_compl when finish sending all frags. pkts_compl also
      has a wrong value, fix it too.
      
      It's introduced by commit 871f0d4c ("8139cp: enable bql").
      Suggested-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarYang Yingliang <yangyingliang@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7fe0ee09
    • David Chang's avatar
      r8169: check ALDPS bit and disable it if enabled for the 8168g · 1bac1072
      David Chang authored
      Windows driver will enable ALDPS function, but linux driver and firmware
      do not have any configuration related to ALDPS function for 8168g.
      So restart system to linux and remove the NIC cable, LAN enter ALDPS,
      then LAN RX will be disabled.
      
      This issue can be easily reproduced on dual boot windows and linux
      system with RTL_GIGA_MAC_VER_40 chip.
      
      Realtek said, ALDPS function can be disabled by configuring to PHY,
      switch to page 0x0A43, reg0x10 bit2=0.
      Signed-off-by: default avatarDavid Chang <dchang@suse.com>
      Acked-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1bac1072
    • Dan Carpenter's avatar
      net: clamp ->msg_namelen instead of returning an error · db31c55a
      Dan Carpenter authored
      If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the
      original code that would lead to memory corruption in the kernel if you
      had audit configured.  If you didn't have audit configured it was
      harmless.
      
      There are some programs such as beta versions of Ruby which use too
      large of a buffer and returning an error code breaks them.  We should
      clamp the ->msg_namelen value instead.
      
      Fixes: 1661bf36 ("net: heap overflow in __audit_sockaddr()")
      Reported-by: default avatarEric Wong <normalperson@yhbt.net>
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Tested-by: default avatarEric Wong <normalperson@yhbt.net>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db31c55a
    • Veaceslav Falico's avatar
      af_packet: block BH in prb_shutdown_retire_blk_timer() · ec6f809f
      Veaceslav Falico authored
      Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(),
      however the timer might fire right in the middle and thus try to re-aquire
      the same spinlock, leaving us in a endless loop.
      
      To fix that, use the spin_lock_bh() to block it.
      
      Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.")
      CC: "David S. Miller" <davem@davemloft.net>
      CC: Daniel Borkmann <dborkman@redhat.com>
      CC: Willem de Bruijn <willemb@google.com>
      CC: Phil Sutter <phil@nwl.cc>
      CC: Eric Dumazet <edumazet@google.com>
      Reported-by: default avatarJan Stancek <jstancek@redhat.com>
      Tested-by: default avatarJan Stancek <jstancek@redhat.com>
      Signed-off-by: default avatarVeaceslav Falico <vfalico@redhat.com>
      Acked-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec6f809f
    • Vlad Yasevich's avatar
      macvtap: Do not double-count received packets · 006da7b0
      Vlad Yasevich authored
      Currently macvlan will count received packets after calling each
      vlans receive handler.   Macvtap attempts to count the packet
      yet again when the user reads the packet from the tap socket.
      This code doesn't do this consistently either.  Remove the
      counting from macvtap and let only macvlan count received
      packets.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Acked-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      006da7b0
  3. 28 Nov, 2013 16 commits