- 04 Jan, 2024 11 commits
-
-
Crescent CY Hsieh authored
After switching the serial interface of the Moxa RS232 PCIe boards, it fails to reset to RS232 when attempting to reload 8250_pci driver. This patch set RS232 as the default setting during the initialization of Moxa PCIe board. Signed-off-by:
Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Link: https://lore.kernel.org/r/20240102053133.9795-1-crescentcy.hsieh@moxa.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vamshi Gajjela authored
Designware UART has optional feature FIFO_MODE to implement FIFO. Encoding FIFO capabilities through Component Parameter Register CPR is optional and it can be enabled using parameter UART_ADD_ENCODED_PARAMS. Driver can exercise fifo capabilities by decoding CPR if implemented or from cpr_val provided from the dw8250_platform_data otherwise. dw8250_setup_port() checks for CPR or cpr_val to determine FIFO size only when Component Version (UCV) is non-zero. Bailing out early on UCV read returning zero will leave fifosize as zero and !UART_CAP_FIFO, hence prevent early return and continue to process CPR or cpr_val for the driver to utilize FIFO. Non-zero UCV implies ADDITIONAL_FEATURES=1, preventing early return will not be an overhead here. Signed-off-by:
Vamshi Gajjela <vamshigajjela@google.com> Link: https://lore.kernel.org/r/20231231182951.877805-1-vamshigajjela@google.comSigned-off-by:
-
Christoph Niedermaier authored
There are register accesses in the function imx_uart_rs485_config(). The clock must be enabled for these accesses. This was ensured by calling it via the function uart_rs485_config() in the probe() function within the range where the clock is enabled. With the commit 7c7f9bc9 ("serial: Deassert Transmit Enable on probe in driver-specific way") it was removed from the probe() function and is now only called through the function uart_add_one_port() which is located at the end of the probe() function. But the clock is already switched off in this area. To ensure that the clock is enabled during register access, move the disabling of the clock to the very end of the probe() function. To avoid leaking enabled clocks on error also add an error path for exiting with disabling the clock. Fixes: 7c7f9bc9 ("serial: Deassert Transmit Enable on probe in driver-specific way") Cc: stable <stable@kernel.org> Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by:
Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20231226113647.39376-1-cniedermaier@dh-electronics.comSigned-off-by:
-
Sam Ravnborg authored
When using a leon kernel with qemu there where no console prompt. The root cause is the handling of the fifo size in the tx part of the apbuart driver. The qemu uart driver only have a very rudimentary status handling and do not report the number of chars queued in the tx fifo in the status register. So the driver ends up with a fifo size of 1. In the tx path the fifo size is divided by 2 - resulting in a fifo size of zero. The original implementation would always try to send one char, but after the introduction of uart_port_tx_limited() the fifo size is respected even for the first char. There seems to be no good reason to divide the fifo size with two - so remove this. It looks like something copied from the original amba driver. With qemu we now have a minimum fifo size of one char, so we show the prompt. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Fixes: d11cc8c3 ("tty: serial: use uart_port_tx_limited()") Cc: Andreas Larsson <andreas@gaisler.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: <linux-serial@vger.kernel.org> Cc: <sparclinux@vger.kernel.org> Link: https://lore.kernel.org/r/20231226121607.GA2622970@ravnborg.orgSigned-off-by:
-
Michael Trimarchi authored
Check if port type is not PORT_UNKNOWN during poll_init. The kgdboc calls the tty_find_polling_driver that check if the serial is able to use poll_init. The poll_init calls the uart uart_poll_init that try to configure the uart with the selected boot parameters. The uart must be ready before setting parameters. Seems that PORT_UNKNOWN is already used by other functions in serial_core to detect uart status, so use the same to avoid to use it in invalid state. The crash happen for instance in am62x architecture where the 8250 register the platform driver after the 8250 core is initialized. Follow the report crash coming from KGDB Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt This section of the code is too early because in this case the omap serial is not probed Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt 0 _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 1 logic_outb (value=0 '\000', addr=18446739675637874689) at lib/logic_pio.c:299 2 0xffff80008082dfcc in io_serial_out (p=0x0, offset=16760830, value=0) at drivers/tty/serial/8250/8250_port.c:416 3 0xffff80008082fe34 in serial_port_out (value=<optimized out>, offset=<optimized out>, up=<optimized out>) at ./include/linux/serial_core.h:677 4 serial8250_do_set_termios (port=0xffff8000828ee940 <serial8250_ports+1568>, termios=0xffff80008292b93c, old=0x0) at drivers/tty/serial/8250/8250_port.c:2860 5 0xffff800080830064 in serial8250_set_termios (port=0xfffffbfffe800000, termios=0xffbffe, old=0x0) at drivers/tty/serial/8250/8250_port.c:2912 6 0xffff80008082571c in uart_set_options (port=0xffff8000828ee940 <serial8250_ports+1568>, co=0x0, baud=115200, parity=110, bits=8, flow=110) at drivers/tty/serial/serial_core.c:2285 7 0xffff800080828434 in uart_poll_init (driver=0xfffffbfffe800000, line=16760830, options=0xffff8000828f7506 <config+6> "115200n8") at drivers/tty/serial/serial_core.c:2656 8 0xffff800080801690 in tty_find_polling_driver (name=0xffff8000828f7500 <config> "ttyS2,115200n8", line=0xffff80008292ba90) at drivers/tty/tty_io.c:410 9 0xffff80008086c0b0 in configure_kgdboc () at drivers/tty/serial/kgdboc.c:194 10 0xffff80008086c1ec in kgdboc_probe (pdev=0xfffffbfffe800000) at drivers/tty/serial/kgdboc.c:249 11 0xffff8000808b399c in platform_probe (_dev=0xffff000000ebb810) at drivers/base/platform.c:1404 12 0xffff8000808b0b44 in call_driver_probe (drv=<optimized out>, dev=<optimized out>) at drivers/base/dd.c:579 13 really_probe (dev=0xffff000000ebb810, drv=0xffff80008277f138 <kgdboc_platform_driver+48>) at drivers/base/dd.c:658 14 0xffff8000808b0d2c in __driver_probe_device (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, dev=0xffff000000ebb810) at drivers/base/dd.c:800 15 0xffff8000808b0eb8 in driver_probe_device (drv=0xfffffbfffe800000, dev=0xffff000000ebb810) at drivers/base/dd.c:830 16 0xffff8000808b0ff4 in __device_attach_driver (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, _data=0xffff80008292bc48) at drivers/base/dd.c:958 17 0xffff8000808ae970 in bus_for_each_drv (bus=0xfffffbfffe800000, start=0x0, data=0xffff80008292bc48, fn=0xffff8000808b0f3c <__device_attach_driver>) at drivers/base/bus.c:457 18 0xffff8000808b1408 in __device_attach (dev=0xffff000000ebb810, allow_async=true) at drivers/base/dd.c:1030 19 0xffff8000808b16d8 in device_initial_probe (dev=0xfffffbfffe800000) at drivers/base/dd.c:1079 20 0xffff8000808af9f4 in bus_probe_device (dev=0xffff000000ebb810) at drivers/base/bus.c:532 21 0xffff8000808ac77c in device_add (dev=0xfffffbfffe800000) at drivers/base/core.c:3625 22 0xffff8000808b3428 in platform_device_add (pdev=0xffff000000ebb800) at drivers/base/platform.c:716 23 0xffff800081b5dc0c in init_kgdboc () at drivers/tty/serial/kgdboc.c:292 24 0xffff800080014db0 in do_one_initcall (fn=0xffff800081b5dba4 <init_kgdboc>) at init/main.c:1236 25 0xffff800081b0114c in do_initcall_level (command_line=<optimized out>, level=<optimized out>) at init/main.c:1298 26 do_initcalls () at init/main.c:1314 27 do_basic_setup () at init/main.c:1333 28 kernel_init_freeable () at init/main.c:1551 29 0xffff8000810271ec in kernel_init (unused=0xfffffbfffe800000) at init/main.c:1441 30 0xffff800080015e80 in ret_from_fork () at arch/arm64/kernel/entry.S:857 Reviewed-by:Douglas Anderson <dianders@chromium.org> Signed-off-by:
Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/r/20231224131200.266224-1-michael@amarulasolutions.comSigned-off-by:
-
Christoph Niedermaier authored
Correct the clock error message by changing the clock name. Fixes: 1e512d45 ("serial: imx: add error messages when .probe fails") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.comSigned-off-by:
-
Antony Pavlov authored
Prior to this patch: ~# cat /proc/interrupts ... 40: 123 0 GIC-0 72 Level altera_uart 41: 9 0 GIC-0 73 Level altera_uart After this patch: ~# cat /proc/interrupts ... 40: 6 0 GIC-0 72 Level ff200100.fpga-uart0 41: 28 0 GIC-0 73 Level ff200200.fpga-uart1 Signed-off-by:
Antony Pavlov <antonynpavlov@gmail.com> Acked-by:
Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20231217195601.236002-1-antonynpavlov@gmail.comSigned-off-by:
-
Crescent CY Hsieh authored
Add "SER_RS485_MODE_RS422" flag to struct serial_rs485, so that serial port can switch interface into RS422 if supported by using ioctl command "TIOCSRS485". By treating RS422 as a mode of RS485, which means while enabling RS422 there are two flags need to be set (SER_RS485_ENABLED and SER_RS485_MODE_RS422), it would make things much easier. For example some places that checks for "SER_RS485_ENABLED" won't need to be rewritten. Signed-off-by:
-
Crescent CY Hsieh authored
This patch replaces the bit shift code with "_BITUL()" macro inside "serial_rs485" struct. Signed-off-by:
-
Vamshi Gajjela authored
Rename the variable size to temp and change its data type from unsigned int to u64 to avoid type casting in multiplication. Remove the intermediate variable frame_time and use temp instead to accommodate the nanoseconds(ns). port->frame_time is an unsigned int, therefore an explicit cast is used to improve readability. Having said this unsigned int is sufficinet to hold frame time duration in nanoseconds for all the standard baudrates. Consider 9600 baud, it takes 1/9600 seconds for one bit, for a total of 10 bits (start, 8-bit data, stop) 10/9600=1.04 ms for 1 byte transfer, frame_time here is 1041667ns. As baudrate increases frame_time decreases, say for 115200 baud it is 86806ns. To avoid costly 64-bit arithmetic we do not upconvert the type for variable frame_time as overflow happens for extremely low baudrates which are impractical and are not used in real-world applications. Signed-off-by:
-
Vamshi Gajjela authored
The function uart_fifo_timeout() returns an unsigned long value, which is the number of jiffies. Therefore, change the variable timeout in the function uart_poll_timeout() from int to unsigned long. Change the return type of the function uart_poll_timeout() from int to unsigned long to be consistent with the type of timeout values. Signed-off-by:
-
- 15 Dec, 2023 23 commits
-
-
Crescent CY Hsieh authored
MOXA PCIe RS422/RS485 boards will not function by default because of the initial default serial interface of all MOXA PCIe boards is set to RS232. This patch fixes the problem above by setting the initial default serial interface to RS422 for those MOXA RS422/RS485 PCIe boards. Signed-off-by:
Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231214060234.6147-1-crescentcy.hsieh@moxa.comSigned-off-by:
-
Théo Lebrun authored
On this platform, different vendor data is used. That requires a compile-time check as we access (1) a global boolean & (2) our local vendor data. Both symbols are accessible only when CONFIG_ACPI_SPCR_TABLE is enabled. Factor the vendor data overriding to a separate function that is empty when CONFIG_ACPI_SPCR_TABLE is not defined. Suggested-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-8-e384afa5e78c@bootlin.comSigned-off-by:
-
Théo Lebrun authored
The whole function body is encapsulated inside an if-condition. Reverse the if logic and early return to remove one indentation level. Also turn two nested ifs into a single one at the end of the function. Reviewed-by:
-
Théo Lebrun authored
Fix the following messages from checkpatch: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c ERROR: do not initialise statics to false WARNING: Possible unnecessary 'out of memory' message WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to CHECK: Prefer using the BIT macro Reviewed-by: -
Théo Lebrun authored
Fix the following checkpatch warnings & checks: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c CHECK: Unbalanced braces around else statement CHECK: Unnecessary parentheses around '[...]' CHECK: braces {} should be used on all arms of this statement CHECK: Comparison to NULL could be written "[...]" WARNING: Comparisons should place the constant on the right side of the test Reviewed-by: -
Théo Lebrun authored
Remove all instances of quoted strings split across lines. Fix four checkpatch warnings: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c WARNING: quoted string split across lines [...] Reviewed-by: -
Théo Lebrun authored
The driver uses two TIOCMBIT macros inside pl011_{get,set}_mctrl to simplify the logic. Those look scary to checkpatch because they contain ifs without do-while loops. Avoid the macros by creating small equivalent static functions; that lets the compiler do its type checking & avoids checkpatch errors. For the second instance __assign_bit is not usable because it deals with unsigned long pointers whereas we have an unsigned int in pl011_set_mctrl. This addresses the following checkpatch warnings: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c ERROR: Macros starting with if should be enclosed by a do - while loop to avoid possible if/else logic defects CHECK: Macro argument 'uartbit' may be better as '(uartbit)' to avoid precedence issues ERROR: Macros starting with if should be enclosed by a do - while loop to avoid possible if/else logic defects CHECK: Macro argument 'tiocmbit' may be better as '(tiocmbit)' to avoid precedence issues Reviewed-by: -
Théo Lebrun authored
Follow recommandations from: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c We fix 5 warnings and 48 checks, all related to whitespace. Culprits are: CHECK: Alignment should match open parenthesis CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Lines should not end with a '(' CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: spaces preferred around that '/' (ctx:VxV) CHECK: spaces preferred around that '|' (ctx:VxV) WARNING: Missing a blank line after declarations WARNING: please, no spaces at the start of a line Signed-off-by: -
Théo Lebrun authored
The driver uses bit shifts and hexadecimal expressions to declare constants. Replace that with the BIT(), GENMASK() & FIELD_PREP_CONST() macros to clarify intent. include/linux/amba/serial.h gets included from arch/arm/include/debug/pl01x.S. Avoid includes and macro tricks for the four defines that are involved: UART01x_DR, UART01x_FR, UART01x_FR_TXFF and UART01x_FR_BUSY. Reviewed-by:
-
Uwe Kleine-König authored
It can happen that while a break is received the transmitter gets empty and IIR signals a Transmitter holding register empty (THRI) event. In this case it's too early for the break workaround. Still doing it then results in the THRI event not being rereported which makes the driver miss that and e.g. for RS485 half-duplex communication it fails to switch back to RX mode. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a pr_warn message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20231208102331.3267192-1-colin.i.king@gmail.comSigned-off-by:
-
Chunyan Zhang authored
The UMS9620 also uses the same serial device with SC9836. Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20231215085630.984892-4-chunyan.zhang@unisoc.comAcked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Hugo Villeneuve authored
Commit cc4c1d05 ("sc16is7xx: Properly resume TX after stop") changed behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc(). For example when sending a 65 bytes message, and assuming the Tx FIFO is initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When the THRI IRQ is fired, the driver will write the remaining byte of the message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx(). When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2 bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling THRI. After sc16is7xx_handle_tx() exits, control returns to sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ is fired, the driver simply acknowledges the interrupt and does nothing more, since all the data has already been written to the FIFO. This results in 2 register writes and 4 register reads all for nothing and taking precious cycles from the I2C/SPI bus. Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to its maximum capacity and there are remaining bytes to send in the message. Fixes: cc4c1d05 ("sc16is7xx: Properly resume TX after stop") Cc: <stable@vger.kernel.org> Signed-off-by:
Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-7-hugo@hugovil.comSigned-off-by:
-
Hugo Villeneuve authored
The SC16IS7XX IC supports a burst mode to access the FIFOs where the initial register address is sent ($00), followed by all the FIFO data without having to resend the register address each time. In this mode, the IC doesn't increment the register address for each R/W byte. The regmap_raw_read() and regmap_raw_write() are functions which can perform IO over multiple registers. They are currently used to read/write from/to the FIFO, and although they operate correctly in this burst mode on the SPI bus, they would corrupt the regmap cache if it was not disabled manually. The reason is that when the R/W size is more than 1 byte, these functions assume that the register address is incremented and handle the cache accordingly. Convert FIFO R/W functions to use the regmap _noinc_ versions in order to remove the manual cache control which was a workaround when using the _raw_ versions. FIFO registers are properly declared as volatile so cache will not be used/updated for FIFO accesses. Fixes: dfeae619 ("serial: sc16is7xx") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugo Villeneuve authored
Now that the driver has been converted to use one regmap per port, change efr locking to operate on a channel basis instead of on the whole IC. Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> # 6.1.x: 3837a037 serial: sc16is7xx: improve regmap debugfs by using one regmap per port Signed-off-by:
-
Hugo Villeneuve authored
Now that the driver has been converted to use one regmap per port, the line structure member is no longer used, so remove it. Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugo Villeneuve authored
Remove global struct regmap so that it is more obvious that this regmap is to be used only in the probe function. Also add a comment to that effect in probe function. Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Hugo Villeneuve authored
Using a static buffer inside sc16is7xx_regmap_name() was a convenient and simple way to set the regmap name without having to allocate and free a buffer each time it is called. The drawback is that the static buffer wastes memory for nothing once regmap is fully initialized. Remove static buffer and use constant strings instead. This also avoids a truncation warning when using "%d" or "%u" in snprintf which was flagged by kernel test robot. Fixes: 3837a037 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> # 6.1.x: 3837a037 serial: sc16is7xx: improve regmap debugfs by using one regmap per port Suggested-by:
-
Christophe JAILLET authored
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d20d3ac106bac6b7cabe39f22ad00ac86910e0a5.1702230342.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Adrian Reber authored
The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root users to checkpoint and restore processes as non-root with CRIU. This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option '--shell-job' as non-root. CRIU's man-page describes the '--shell-job' option like this: Allow one to dump shell jobs. This implies the restored task will inherit session and process group ID from the criu itself. This option also allows to migrate a single external tty connection, to migrate applications like top. TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE. With this change it is possible to checkpoint and restore processes which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is set. Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Adrian Reber <areber@redhat.com> Acked-by:
Andrei Vagin <avagin@gmail.com> Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.comSigned-off-by:
-
Rob Herring authored
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Error checking for matching was not necessary as matching is always successful if we're already in probe and the match tables always have data pointers. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231207162632.2650356-2-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. Soon the implicit includes are going to be removed. Signed-off-by:
-
Fabio Estevam authored
i.MX1 has three UART interrupts instead of a single one like other i.MX devices. Take this into account for properly describing the i.MX1 UART interrupts. This fixes the following dt-schema warning: from schema $id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#yaml# imx1-ads.dtb: serial@206000: interrupts: [[30], [29], [26]] is too long Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
-
- 11 Dec, 2023 1 commit
-
-
Greg Kroah-Hartman authored
We need the serial fixes in here as well to build off of. Signed-off-by:
-
- 10 Dec, 2023 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Borislav Petkov: - Make sure tasks are thawed exactly and only once to avoid their state getting corrupted * tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer,sched: Do not restore saved_state of a thawed task
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf event fix from Borislav Petkov: - Make sure perf event size validation is done on every event in the group * tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_validate_size()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add a forgotten CPU vendor check in the AMD microcode post-loading callback so that the callback runs only on AMD - Make sure SEV-ES protocol negotiation happens only once and on the BSP * tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Check vendor in the AMD microcode callback x86/sev: Fix kernel crash due to late update to read-only ghcb_version
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Generic: - Set .owner for various KVM file_operations so that files refcount the KVM module until KVM is done executing _all_ code, including the last few instructions of kvm_put_kvm(). And then revert the misguided attempt to rely on "struct kvm" refcounts to pin KVM-the-module. ARM: - Do not redo the mapping of vLPIs, if they have already been mapped s390: - Do not leave bits behind in PTEs - Properly catch page invalidations that affect the prefix of a nested guest x86: - When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0, get the CPL directly instead of relying on preempted_in_kernel (which is valid if and only if the vCPU was preempted, i.e. NOT running). - Fix a benign "return void" that was recently introduced. Selftests: - Makefile tweak for dependency generation - '-Wformat' fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES KVM: selftests: add -MP to CFLAGS KVM: selftests: Actually print out magic token in NX hugepages skip message KVM: x86: Remove 'return void' expression for 'void function' Revert "KVM: Prevent module exit until all VMs are freed" KVM: Set file_operations.owner appropriately for all such structures KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode KVM: arm64: GICv4: Do not perform a map to a mapped vLPI KVM: s390/mm: Properly reset no-dat KVM: s390: vsie: fix wrong VIR 37 when MSO is used
-
