1. 17 Aug, 2015 8 commits
    • Raja Mani's avatar
      ath10k: refactor phyerr event handlers · 991adf71
      Raja Mani authored
      Existing phyerr event handlers directly uses phyerr header format
      (ie, struct wmi_phyerr and struct wmi_phyerr_event) in the code
      exactly on how firmware packs it. This is the problem in 10.4 fw
      specific phyerr event handling where it uses different phyerror
      header format. Before adding 10.4 specific handler, little bit of
      refactor is done in existing phyerr handlers.
      
      Two new abstracted structures (struct wmi_phyerr_ev_hdr_arg and
      struct wmi_phyerr_ev_arg) are introduced to remove dependency of using
      firmware specific header format in the code. So that firmware specific
      phyerror handlers can populate values to abstracted structures and
      the following code can use abstracted struct for further operation.
      
      .pull_phyerr_hdr is added newly to pull common phyerr header info
      like tsf, buf_len, number of phyerr packed. Existing .pull_phyerr
      handler is changed and called to parse every sub phyerrs in the event.
      
      Validated these refactoring on qca988x hw2.0 using fw 10.2.4 version.
      Signed-off-by: default avatarRaja Mani <rmani@qti.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      991adf71
    • Nicholas Mc Guire's avatar
      wil6210: match wait_for_completion_timeout return type · f4bbb829
      Nicholas Mc Guire authored
      Return type of wait_for_completion_timeout is unsigned long not int.
      As remain is exclusively used for wait_for_completion_timeout here its
      type is simply changed to unsigned long.
      
      API conformance testing for completions with coccinelle spatches are being
      used to locate API usage inconsistencies:
      ./drivers/net/wireless/ath/wil6210/wmi.c:827
      	int return assigned to unsigned long
      
      Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m,
      CONFIG_WIL6210=m
      
      Patch is against 4.1-rc3 (localversion-next is -next-20150514)
      Signed-off-by: default avatarNicholas Mc Guire <hofrat@osadl.org>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      f4bbb829
    • Michal Kazior's avatar
      ath10k: split ap/ibss wep key install process · 8674d909
      Michal Kazior authored
      Apparently it's not safe to install both pairwise
      and groupwise keys on AP vdevs as it can cause
      traffic to stop working in some multi-vif
      (WPA+WEP) cases.
      
      Fixes: ce90b271 ("ath10k: fix multiple key static wep with ibss")
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      8674d909
    • Vasanthakumar Thiagarajan's avatar
      ath10k: add cycle/rx_clear counters frequency to hw_params · 9c8fb548
      Vasanthakumar Thiagarajan authored
      The frequency at which cycle/rx_clear counters are running might
      change from one target type to another. QCA99X0 is running the
      counters at 150Mhz while QCA9888X and QCA6174 are running at 88Mhz.
      Add a new entry to hw_params to store the target specific frequency
      and use it in msecs conversion. This change fixes inconsistent
      channel active/busy time.
      Signed-off-by: default avatarVasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      9c8fb548
    • Vasanthakumar Thiagarajan's avatar
      ath10k: fix invalid survey reporting for QCA99X0 · 3d2a2e29
      Vasanthakumar Thiagarajan authored
      There are three WMI_CHAN_INFO events reported per channel
      in QCA99X0 firmware. First one is a notification at the begining
      of the channel dwell time with cmd_flag as CHAN_INFO_START(cmd_flag = 0),
      second one is a notification at the end of the dwell time with cmd_flag
      CHAN_INFO_PRE_COMPLETE (cmd_flag = 2) and the third is the indication
      with CHAN_INFO_COMPLETE (cmd_flag = 1) which is the last indication for
      the channel. Since there is a new state before the completion, the handler
      is to fixed so that the counts are deducted from the ones reported with
      CHAN_INFO_START rather than the ones reported with CHAN_INFO_PRE_COMPLETE.
      Without this fix there will be lots of 0 msecs reported as active
      and busy time.
      Signed-off-by: default avatarVasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      3d2a2e29
    • Michal Kazior's avatar
      ath10k: wake up queue upon vif creation · 6d2d51ec
      Michal Kazior authored
      Vif's vdev_id is used as queue number. However due
      to the tx pausing design in ath10k it was possible
      for a new interface to be created with its tx
      queue stopped (via ieee80211_stop_queues). This
      could in turn leave the interface inoperable until
      ath10k_mac_tx_unlock() was called.
      
      This problem only affected multi-vif scenarios when
      new interfaces were created some time later after
      other interfaces have been running for some time
      and had Tx queue full at some point prior.
      
      Possible manifestation of the bug was
      authentication timeout for a client vif.
      
      Fixes: 96d828d4 ("ath10k: rework tx queue locking")
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      6d2d51ec
    • Michal Kazior's avatar
      ath10k: wake up offchannel queue properly · 3a73d1a6
      Michal Kazior authored
      Once HTT Tx queue got full offchannel queue was
      stopped and never woken up again. This broke, e.g.
      P2P. This could be reproduced after running a lot
      of traffic enough to saturate 100% of the driver
      Tx queue and then trying to send offchannel
      traffic.
      
      Fixes: 96d828d4 ("ath10k: rework tx queue locking")
      Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      3a73d1a6
    • Kalle Valo's avatar
      Merge ath-next from ath.git. Major changes in ath10k: · 94e92a7b
      Kalle Valo authored
      * add support for qca99x0 family of devices
      * improve performance of tx_lock
      * add support for raw mode (802.11 frame format) and software crypto
        engine enabled via a module parameter
      
      wil6210:
      
      * implement TSO support
      * support bootloader v1 and onwards
      94e92a7b
  2. 13 Aug, 2015 27 commits
  3. 10 Aug, 2015 5 commits