- 19 Nov, 2021 26 commits
-
-
Heiko Carstens authored
The second parameter as specified by the format string is actually a string not an integer. Acked-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
Fix kernel doc comments where appropriate, or remove incorrect kernel doc indicators. Acked-by:
-
Heiko Carstens authored
Fix kernel doc comments where appropriate or remove incorrect kernel doc indicators. Also move kernel doc comments directly before functions. Signed-off-by:
-
Julian Wiedmann authored
We always need an RX queue, and there's no reconfig situation either where we would need to free & rebuild the queue. So allocate the RX queue right from the start, and avoid freeing it during unrelated qeth_free_qdio_queues() calls. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: use eth_hw_addr_set() in arch-specific drivers Fixups for more arch-specific drivers. With these (and another patch which didn't fit) the build is more or less clean with all cross-compilers available on kernel.org. I say more or less because around half of the arches fail to build for unrelated reasons right now. Most of the changes here are for m68k, 32bit x86 and alpha. ==================== Signed-off-by: -
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
dev_addr is set from IO reads, passed to an arch-specific helper. Note that the helper never reads it so uninitialized temp is fine. Fixes build on parisc. Signed-off-by:
-
Jakub Kicinski authored
dev_addr is set from IO reads, and broken from a u16 value. Fixes build on Alpha. Signed-off-by:
-
Jakub Kicinski authored
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by:
-
Jakub Kicinski authored
Use temp to pass to the reading function, the function is generic so can't fix there. Fixes m68k build. Signed-off-by:
-
Jakub Kicinski authored
Loop with offsetting to every second byte, so use a temp buffer. Fixes m68k build. Signed-off-by:
-
Jakub Kicinski authored
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on Alpha. Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
dev_addr is initialized byte by byte from series. Fixes build on x86 (32bit). Signed-off-by:
-
Jakub Kicinski authored
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by:
-
Jakub Kicinski authored
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: constify netdev->dev_addr - x86 changes Resending these so they can get merged while I battle random cross builds. ==================== Signed-off-by: -
Jakub Kicinski authored
Add const to the address param of ipw_send_adapter_address() all the functions down the chain have already been changed. Not sure how I lost this in the rebase. Acked-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
wilc_set_mac_address() calls IO routines which don't guarantee the pointer won't be written to. Make a copy. Acked-by:
-
Jakub Kicinski authored
Argument comes from netdev->dev_addr directly, it needs a const. Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Jakub Kicinski authored
The future is here, convert the new driver as we are about to make netdev->dev_addr const. Acked-by:
Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'regmap-no-bus-update-bits' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Mark Brown says: =================== regmap: Allow regmap_update_bits() to be offloaded with no bus Some hardware can do this so let's use that capability. =================== Link: https://lore.kernel.org/all/YZWDOidBOssP10yS@sirena.org.uk/Signed-off-by:
-
- 18 Nov, 2021 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ... -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Several xes and one old ioctl deprecation. Namely there's fix for crashes/warnings with lzo compression that was suspected to be caused by first pull merge resolution, but it was a different bug. Summary: - regression fix for a crash in lzo due to missing boundary checks of the page array - fix crashes on ARM64 due to missing barriers when synchronizing status bits between work queues - silence lockdep when reading chunk tree during mount - fix false positive warning in integrity checker on devices with disabled write caching - fix signedness of bitfields in scrub - start deprecation of balance v1 ioctl" * tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: deprecate BTRFS_IOC_BALANCE ioctl btrfs: make 1-bit bit-fields of scrub_page unsigned int btrfs: check-integrity: fix a warning on write caching disabled disk btrfs: silence lockdep when reading chunk tree during mount btrfs: fix memory ordering between normal and ordered work functions btrfs: fix a out-of-bound access in copy_compressed_data_to_page() -
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF fix from Jan Kara: "A fix for a long-standing UDF bug where we were not properly validating directory position inside readdir" * tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix crash after seekdir
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull setattr idmapping fix from Christian Brauner: "This contains a simple fix for setattr. When determining the validity of the attributes the ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id. When the {g,u}id attribute of the file isn't altered and the caller's fs{g,u}id matches the current {g,u}id attribute the attribute change is allowed. The value in ia_{g,u}id does already account for idmapped mounts and will have taken the relevant idmapping into account. So in order to verify that the {g,u}id attribute isn't changed we simple need to compare the ia_{g,u}id value against the inode's i_{g,u}id value. This only has any meaning for idmapped mounts as idmapping helpers are idempotent without them. And for idmapped mounts this really only has a meaning when circular idmappings are used, i.e. mappings where e.g. id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such ciruclar mappings can e.g. be useful when sharing the same home directory between multiple users at the same time. Before this patch we could end up denying legitimate attribute changes and allowing invalid attribute changes when circular mappings are used. To even get into this situation the caller must've been privileged both to create that mapping and to create that idmapped mount. This hasn't been seen in the wild anywhere but came up when expanding the fstest suite during work on a series of hardening patches. All idmapped fstests pass without any regressions and we're adding new tests to verify the behavior of circular mappings. The new tests can be found at [1]" Link: https://lore.kernel.org/linux-fsdevel/20211109145713.1868404-2-brauner@kernel.org [1] * tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs: handle circular mappings correctly -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "parisc bug and warning fixes and wire up futex_waitv. Fix some warnings which showed up with allmodconfig builds, a revert of a change to the sigreturn trampoline which broke signal handling, wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig" * tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig Revert "parisc: Reduce sigreturn trampoline to 3 instructions" parisc: Wrap assembler related defines inside __ASSEMBLY__ parisc: Wire up futex_waitv parisc: Include stringify.h to avoid build error in crypto/api.c parisc/sticon: fix reverse colors
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Selftest changes: - Cleanups for the perf test infrastructure and mapping hugepages - Avoid contention on mmap_sem when the guests start to run - Add event channel upcall support to xen_shinfo_test x86 changes: - Fixes for Xen emulation - Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache - Fixes for migration of 32-bit nested guests on 64-bit hypervisor - Compilation fixes - More SEV cleanups Generic: - Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS and num_online_cpus(). Most architectures were only using one of the two" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus() KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus() KVM: x86: Assume a 64-bit hypercall for guests with protected state selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore riscv: kvm: fix non-kernel-doc comment block KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror() KVM: SEV: Drop a redundant setting of sev->asid during initialization KVM: SEV: WARN if SEV-ES is marked active but SEV is not KVM: SEV: Set sev_info.active after initial checks in sev_guest_init() KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache KVM: nVMX: Use a gfn_to_hva_cache for vmptrld KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check KVM: x86/xen: Use sizeof_field() instead of open-coding it KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12 KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO ... -
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A handful of documentation fixes for 5.16" * tag 'docs-5.16-2' of git://git.lwn.net/linux: Documentation/process: fix a cross reference Documentation: update vcpu-requests.rst reference docs: accounting: update delay-accounting.rst reference libbpf: update index.rst reference docs: filesystems: Fix grammatical error "with" to "which" doc/zh_CN: fix a translation error in management-style docs: ftrace: fix the wrong path of tracefs Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375 Documentation: arm: marvell: Add some links to homepage / product infos docs: Update Sphinx requirements
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk fixes from Petr Mladek: - Try to flush backtraces from other CPUs also on the local one. This was a regression caused by printk_safe buffers removal. - Remove header dependency warning. * tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove printk.h inclusion in percpu.h printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
-
Dan Carpenter authored
The ptp_ocp_get_mem() function does not return NULL, it returns error pointers. Fixes: 773bda96 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
John Efstathiades says: =================== lan78xx NAPI Performance Improvements This patch set introduces a set of changes to the lan78xx driver that were originally developed as part of an investigation into the performance of TCP and UDP transfers on an Android system. The changes increase the throughput of both UDP and TCP transfers and reduce the overall CPU load. These improvements are also seen on a standard Linux kernel. Typical results are included at the end of this document. The changes to the driver evolved over time. The patches presented here attempt to organise the changes in to coherent blocks that affect logically connected parts of the driver. The patches do not reflect the way in which the code evolved during the performance investigation. Each patch produces a working driver that has an incremental improvement but patches 2, 3 and 6 should be considered a single update. The changes affect the following parts of the driver: 1. Deferred URB processing The deferred URB processing that was originally done by a tasklet is now done by a NAPI polling routine. The NAPI cycle has a fixed work budget that controls how many received frames are passed to the network stack. Patch 6 introduces the NAPI polling but depends on preceding patches. The new NAPI polling routine is also responsible for submitting Rx and Tx URBs to the USB host controller. Moving the URB processing to a NAPI-based system "smoothed" incoming and outgoing data flows on the Android system under investigation. However, taken in isolation, moving from a tasklet approach to a NAPI approach made little or no difference to the overall performance. 2. URB buffer management The driver creates a pool of Tx and a pool of Rx URB buffers. Each buffer is large enough to accommodate a packet with the maximum MTU data. URBs are allocated from these pools as required. Patch 2 introduces the new Tx buffer pool. Patch 3 introduces the new Rx buffer pool. 3. Tx pending data SKBs containing data to be transmitted are added to a queue. The driver tracks free Tx URBs and the corresponding free Tx URB space. When new Tx URBs are submitted, pending data is copied into the URB buffer until the URB buffer is filled or there is no more pending data. This maximises utilisation the LAN78xx internal USB and network frame buffers. New Tx URBs are submitted to the USB host controller as part of the NAPI polling cycle. Patch 2 introduces these changes. 4. Rx URB completion A new URB is no longer submitted as part of the URB completion callback. New URBs are submitted during the NAPI polling cycle. Patch 3 introduces these changes. 5. Rx URB processing Completed URBs are put on to queue for processing (as is done in the current driver). Network packets in completed URBs are copied from the URB buffer in to dynamically allocated SKBs and passed to the network stack. The emptied URBs are resubmitted to the USB host controller. Patch 3 introduces this change. Patch 6 updates the change to use NAPI SKBs. Each packet passed to the network stack is a single NAPI work item. If the NAPI work budget is exhausted the remaining packets in the URB are put onto an overflow queue that is processed at the start of the next NAPI cycle. Patch 6 introduces this change. 6. Driver-specific hard_header_len The driver-specific hard_header_len adjustment was removed as it broke generic receive offload (GRO) processing. Moreover, it was no longer required due the change in Tx pending data management (see point 3. above). Patch 5 introduces this change. The modification has been tested on four different target machines: Target | CPU | ARCH | cores | kernel | RAM | -----------------+------------+---------+-------+--------+-------| Raspberry Pi 4B | Cortex-A72 | aarch64 | 4 | 64-bit | 2 GB | Nitrogen8M SBC | Cortex-A53 | aarch64 | 4 | 64-bit | 2 GB | Compaq Pressario | Pentium D | i686 | 2 | 32-bit | 4 GB | Dell T3620 | Core i3 | x86_64 | 2+2 | 64-bit | 16 GB | The targets, apart from the Compaq, each have an on-chip USB3 host controller. A PCIe-based USB3 host controller card was added to the Compaq to provide the necessary USB3 host interface. The network throughput was measured using iperf3. The peer device was a second Dell T3620 fitted with an Intel i210 network interface. The target machine and the peer device were connected via a Netgear GS105 gigabit switch. The CPU load was measured using mpstat running on the target machine. The tables below summarise the throughput and CPU load improvements achieved by the updated driver. The bandwidth is the average bandwidth reported by iperf3 at the end of a 60-second test. The percentage idle figure is the average idle reported across all CPU cores on the target machine for the duration of the test. TCP Rx (target receiving, peer transmitting) | Standard Driver | NAPI Driver | Target | Bandwidth | % Idle | Bandwidth | % Idle | -----------------+-----------+--------+--------------------| RPi4 Model B | 941 | 74.9 | 941 | 91.5 | Nitrogen8M | 941 | 76.2 | 941 | 92.7 | Compaq Pressario | 941 | 44.5 | 941 | 82.1 | Dell T3620 | 941 | 88.9 | 941 | 98.3 | TCP Tx (target transmitting, peer receiving) | Standard Driver | NAPI Driver | Target | Bandwidth | % Idle | Bandwidth | % Idle | -----------------+-----------+--------+--------------------| RPi4 Model B | 683 | 80.1 | 942 | 97.6 | Nitrogen8M | 942 | 97.8 | 942 | 97.3 | Compaq Pressario | 939 | 80.0 | 942 | 91.2 | Dell T3620 | 942 | 95.3 | 942 | 97.6 | UDP Rx (target receiving, peer transmitting) | Standard Driver | NAPI Driver | Target | Bandwidth | % Idle | Bandwidth | % Idle | -----------------+-----------+--------+--------------------| RPi4 Model B | - | - | 958 (0%) | 76.2 | Nitrogen8M | 690 (25%) | 57.7 | 937 (0%) | 68.5 | Compaq Pressario | 958 (0%) | 50.2 | 958 (0%) | 61.6 | Dell T3620 | 958 (0%) | 89.6 | 958 (0%) | 85.3 | The figure in brackets is the percentage packet loss. UDP Tx (target transmitting, peer receiving) | Standard Driver | NAPI Driver | Target | Bandwidth | % Idle | Bandwidth | % Idle | -----------------+-----------+--------+--------------------| RPi4 Model B | 370 | 75.0 | 886 | 78.9 | Nitrogen8M | 710 | 75.0 | 958 | 85.3 | Compaq Pressario | 958 | 65.5 | 958 | 76.6 | Dell T3620 | 958 | 97.0 | 958 | 97.3 | ==================== Signed-off-by: -
John Efstathiades authored
This patch introduces a NAPI-style approach for processing completed Rx URBs that contributes to improving driver throughput and reducing CPU load. Packets in completed URBs are copied to NAPI SKBs and passed to the network stack for processing. Each frame passed to the stack is one work item in the NAPI budget. If the NAPI budget is consumed and frames remain, they are added to an overflow queue that is processed at the start of the next NAPI polling cycle. The NAPI handler is also responsible for copying pending Tx data to Tx URBs and submitting them to the USB host controller for transmission. Signed-off-by:
John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by:
-
John Efstathiades authored
Remove hardware-specific header length adjustment as it is no longer required. It also breaks generic receive offload (GRO) processing of received TCP frames that results in a TCP ACK being sent for each received frame. Signed-off-by:
-
John Efstathiades authored
Move position of rx_submit() to remove forward declaration of rx_complete() which is now no longer required. Signed-off-by:
-
