- 14 Mar, 2020 3 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fully do the CPU resets as intended With 7de3f142 ("KVM: s390: Add new reset vcpu API") we clarified the meaning of the reset ioctl to fully reset the CPU and not only the parts that can not be handled by userspace. Turns out that we missed some parts.
-
Nitesh Narayan Lal authored
Previously all fields of structure kvm_lapic_irq were not initialized before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause an issue when any of those fields are used for processing a request. For example not initializing the msi_redir_hint field before passing to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of kvm_apic_map_get_dest_lapic(). This will specifically happen when the kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage value of msi_redir_hint, which should not happen as the request belongs to APIC fixed delivery mode and we do not want to deliver the interrupt only to the lowest priority candidate. This patch initializes all the fields of kvm_lapic_irq based on the values of ioapic redirect_entry object before passing it on to kvm_bitmap_or_dest_vcpus(). Fixes: 7ee30bc1 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by:
Nitesh Narayan Lal <nitesh@redhat.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> [Set level to false since the value doesn't really matter. Suggested by Vitaly Kuznetsov. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1 is not supported[*], i.e. intercepting ENCLS to inject a #UD is unnecessary. Avoiding ENCLS-exiting even when it is reported as supported by the CPU works around a reported issue where SGX is "hard" disabled after an S3 suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control are enumerated as unsupported. While the root cause of the S3 issue is unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a workaround for what is most likely a hardware or firmware issue. As a bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and vmcs02. Note, SGX must be disabled in BIOS to take advantage of this workaround [*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are cleared. Soft disabled meaning disabling SGX without clearing the primary CPUID bit (in leaf 0x7) and without poking into non-SGX CPU paths, e.g. for the VMCS controls. Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest") Reported-by:Toni Spets <toni.spets@iki.fi> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
- 11 Mar, 2020 1 commit
-
-
Christian Borntraeger authored
When we do the initial CPU reset we must not only clear the registers in the internal data structures but also in kvm_run sync_regs. For modern userspace sync_regs is the only place that it looks at. Fixes: 7de3f142 ("KVM: s390: Add new reset vcpu API") Acked-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
- 05 Mar, 2020 1 commit
-
-
Jason A. Donenfeld authored
This was evidently copy and pasted from the i915 driver, but the text wasn't updated. Fixes: 4f337faf ("KVM: allow disabling -Werror") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
- 03 Mar, 2020 2 commits
-
-
Vitaly Kuznetsov authored
Commit c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") did some field shuffling and instead of [opcode_len, _regs) started clearing [has_seg_override, modrm). The comment about clearing fields altogether is not true anymore. Fixes: c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") Signed-off-by:
-
Vitaly Kuznetsov authored
After commit 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Hyper-V guests on KVM stopped booting with: kvm_nested_vmexit: rip fffff802987d6169 reason EPT_VIOLATION info1 181 info2 0 int_info 0 int_info_err 0 kvm_page_fault: address febd0000 error_code 181 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 FAIL kvm_inj_exception: #UD (0x0) "f3 a5" is a "rep movsw" instruction, which should not be intercepted at all. Commit c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") reduced the number of fields cleared by init_decode_cache() claiming that they are being cleared elsewhere, 'intercept', however, is left uncleared if the instruction does not have any of the "slow path" flags (NotImpl, Stack, Op3264, Sse, Mmx, CheckPerm, NearBranch, No16 and of course Intercept itself). Fixes: c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: stable@vger.kernel.org Suggested-by:
-
- 02 Mar, 2020 2 commits
-
-
Haiwei Li authored
In svm, exit_code for MSR writes is not EXIT_REASON_MSR_WRITE which belongs to vmx. According to amd manual, SVM_EXIT_MSR(7ch) is the exit_code of VMEXIT_MSR due to RDMSR or WRMSR access to protected MSR. Additionally, the processor indicates in the VMCB's EXITINFO1 whether a RDMSR(EXITINFO1=0) or WRMSR(EXITINFO1=1) was intercepted. Signed-off-by:
Haiwei Li <lihaiwei@tencent.com> Fixes: 1e9e2622 ("KVM: VMX: FIXED+PHYSICAL mode single target IPI fastpath", 2019-11-21) Signed-off-by:
-
Wanpeng Li authored
Naresh Kamboju reported: Linux version 5.6.0-rc4 (oe-user@oe-host) (gcc version (GCC)) #1 SMP Sun Mar 1 22:59:08 UTC 2020 kvm: no hardware support BUG: kernel NULL pointer dereference, address: 000000000000028c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), 04/01/2014 RIP: 0010:kobject_put+0x12/0x1c0 Call Trace: cpufreq_cpu_put+0x15/0x20 kvm_arch_init+0x1f6/0x2b0 kvm_init+0x31/0x290 ? svm_check_processor_compat+0xd/0xd ? svm_check_processor_compat+0xd/0xd svm_init+0x21/0x23 do_one_initcall+0x61/0x2f0 ? rdinit_setup+0x30/0x30 ? rcu_read_lock_sched_held+0x4f/0x80 kernel_init_freeable+0x219/0x279 ? rest_init+0x250/0x250 kernel_init+0xe/0x110 ret_from_fork+0x27/0x50 Modules linked in: CR2: 000000000000028c ---[ end trace 239abf40c55c409b ]--- RIP: 0010:kobject_put+0x12/0x1c0 cpufreq policy which is get by cpufreq_cpu_get() can be NULL if it is failure, this patch takes care of it. Fixes: aaec7c03 (KVM: x86: avoid useless copy of cpufreq policy) Reported-by:Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
- 01 Mar, 2020 1 commit
-
-
Oliver Upton authored
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by:
Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Oliver Upton <oupton@google.com> Signed-off-by:
-
- 28 Feb, 2020 9 commits
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.6, take #1 - Fix compilation on 32bit - Move VHE guest entry/exit into the VHE-specific entry code - Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
-
Erwan Velu authored
In older version of systemd(219), at boot time, udevadm is called with : /usr/bin/udevadm trigger --type=devices --action=add" This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent, leading to the "kvm: disabled by bios" message in case of your Bios disabled the virtualization extensions. On a modern system running up to 256 CPU threads, this pollutes the Kernel logs. This patch offers to ratelimit this message to avoid any userspace program triggering this uevent printing this message too often. This patch is only a workaround but greatly reduce the pollution without breaking the current behavior of printing a message if some try to instantiate KVM on a system that doesn't support it. Note that recent versions of systemd (>239) do not have trigger this behavior. This patch will be useful at least for some using older systemd with recent Kernels. Signed-off-by:
Erwan Velu <e.velu@criteo.com> Signed-off-by:
-
Paolo Bonzini authored
struct cpufreq_policy is quite big and it is not a good idea to allocate one on the stack. Just use cpufreq_cpu_get and cpufreq_cpu_put which is even simpler. Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Paolo Bonzini authored
Restrict -Werror to well-tested configurations and allow disabling it via Kconfig. Reported-by:
-
Valdis Klētnieks authored
Compile error with CONFIG_KVM_INTEL=y and W=1: CC arch/x86/kvm/vmx/vmx.o arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=] 68 | static const struct x86_cpu_id vmx_cpu_id[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a reference to the structure (or any code at all). This makes W=1 compiles unhappy. Wrap both in a #ifdef to avoid the issue. Signed-off-by:Valdis Kletnieks <valdis.kletnieks@vt.edu> [Do the same for CONFIG_KVM_AMD. - Paolo] Signed-off-by:
-
Wanpeng Li authored
Nick Desaulniers Reported: When building with: $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000 The following warning is observed: arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=] static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int vector) ^ Debugging with: https://github.com/ClangBuiltLinux/frame-larger-than via: $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \ kvm_send_ipi_mask_allbutself points to the stack allocated `struct cpumask newmask` in `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as 8192, making a single instance of a `struct cpumask` 1024 B. This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for both pv tlb and pv ipis.. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Acked-by:
-
Wanpeng Li authored
Introduce some pv check helpers for consistency. Suggested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Christian Borntraeger authored
Sparse notices that declaration and implementation do not match: arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces) arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: expected struct kvm_vcpu [noderef] <asn:3> ** arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: got struct kvm_vcpu *[noderef] <asn:3> * Signed-off-by:
-
Paolo Bonzini authored
Even if APICv is disabled at startup, the backing page and ir_list need to be initialized in case they are needed later. The only case in which this can be skipped is for userspace irqchip, and that must be done because avic_init_backing_page dereferences vcpu->arch.apic (which is NULL for userspace irqchip). Tested-by: rmuncrief@humanavance.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
- 24 Feb, 2020 1 commit
-
-
Christian Borntraeger authored
We also need to rstify the new ioctls that we added in parallel to the rstification of the kvm docs. Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
- 23 Feb, 2020 5 commits
-
-
Oliver Upton authored
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit. Signed-off-by:
-
Oliver Upton authored
Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function. Signed-off-by:
-
Paolo Bonzini authored
vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default. Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by:
-
Oliver Upton authored
Since commit 5f3d45e7 ("kvm/x86: add support for MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap flag processor-based execution control for its L2 guest. KVM simply forwards any MTF VM-exits to the L1 guest, which works for normal instruction execution. However, when KVM needs to emulate an instruction on the behalf of an L2 guest, the monitor trap flag is not emulated. Add the necessary logic to kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon instruction emulation for L2. Fixes: 5f3d45e7 ("kvm/x86: add support for MONITOR_TRAP_FLAG") Signed-off-by:
-
Li RongQing authored
rename svm_hardware_unsetup as svm_hardware_teardown, move it before svm_hardware_setup, and call it to free all memory if fail to setup in svm_hardware_setup, otherwise memory will be leaked remove __exit attribute for it since it is called in __init function Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
-
- 22 Feb, 2020 3 commits
-
-
James Morse authored
KVM uses some of the static-inline helpers like icache_is_vipt() from its HYP code. This assumes the function is inlined so that the code is mapped to EL2. The compiler may decide not to inline these, and the out-of-line version may not be in the __hyp_text section. Add the additional __always_ hint to these static-inlines that are used by KVM. Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200220165839.256881-4-james.morse@arm.com
-
James Morse authored
KVM uses swab32() when mediating GIC MMIO accesses if the GICV is badly aligned, and the host and guest differ in endianness. arm64 doesn't provide a __arch_swab32(), so __fswab32() is always backed by the macro implementation that the compiler reduces to a single instruction. But the static-inline causes problems for KVM if the compiler chooses not to inline this function, it may not be located in the __hyp_text where __vgic_v2_perform_cpuif_access() needs it. Create our own __kvm_swab32() macro that calls ___constant_swab32() directly. This way we know it will always be inlined. Signed-off-by:
-
James Morse authored
On non VHE CPUs, KVM's __hyp_text contains code run at EL2 while the rest of the kernel runs at EL1. This code lives in its own section with start and end markers so we can map it to EL2. The compiler may decide not to inline static-inline functions from the header file. It may also decide not to put these out-of-line functions in the same section, meaning they aren't mapped when called at EL2. Clang-9 does exactly this with __kern_hyp_va() and a few others when x18 is reserved for the shadow call stack. Add the additional __always_ hint to all the static-inlines that are called from a hyp file. Signed-off-by:
-
- 21 Feb, 2020 8 commits
-
-
Miaohe Lin authored
When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
-
Miaohe Lin authored
When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable. Reviewed-by:
-
Vitaly Kuznetsov authored
KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*), nothing happens to VMX MSRs on the already existing vCPUs, however, all new ones are created with PIN_BASED_POSTED_INTR filtered out. This is very confusing and results in the following picture inside the guest: $ rdmsr -ax 0x48d ff00000016 7f00000016 7f00000016 7f00000016 This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three. L1 hypervisor may only check CPU0's controls to find out what features are available and it will be very confused later. Switch to setting PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting. Signed-off-by:
-
Vitaly Kuznetsov authored
Even when APICv is disabled for L1 it can (and, actually, is) still available for L2, this means we need to always call vmx_deliver_nested_posted_interrupt() when attempting an interrupt delivery. Suggested-by:
-
Suravee Suthikulpanit authored
Launching VM w/ AVIC disabled together with pass-through device results in NULL pointer dereference bug with the following call trace. RIP: 0010:svm_refresh_apicv_exec_ctrl+0x17e/0x1a0 [kvm_amd] Call Trace: kvm_vcpu_update_apicv+0x44/0x60 [kvm] kvm_arch_vcpu_ioctl_run+0x3f4/0x1c80 [kvm] kvm_vcpu_ioctl+0x3d8/0x650 [kvm] do_vfs_ioctl+0xaa/0x660 ? tomoyo_file_ioctl+0x19/0x20 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x57/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Investigation shows that this is due to the uninitialized usage of struct vapu_svm.ir_list in the svm_set_pi_irte_mode(), which is called from svm_refresh_apicv_exec_ctrl(). The ir_list is initialized only if AVIC is enabled. So, fixes by adding a check if AVIC is enabled in the svm_refresh_apicv_exec_ctrl(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206579 Fixes: 8937d762 ("kvm: x86: svm: Add support to (de)activate posted interrupts.") Signed-off-by:Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Xiaoyao Li authored
Commit 15934878 ("x86/vmx: Introduce VMX_FEATURES_*") missed bit 26 (enable user wait and pause) of Secondary Processor-based VM-Execution Controls. Add VMX_FEATURE_USR_WAIT_PAUSE flag so that it shows up in /proc/cpuinfo, and use it to define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE to make them uniform. Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by:
-
wanpeng li authored
For the duration of mapping eVMCS, it derefences ->memslots without holding ->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU is already taken. It can be reproduced by running kvm's evmcs_test selftest. ============================= warning: suspicious rcu usage 5.6.0-rc1+ #53 tainted: g w ioe ----------------------------- ./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/8507: #0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x680 [kvm] stack backtrace: cpu: 6 pid: 8507 comm: evmcs_test tainted: g w ioe 5.6.0-rc1+ #53 hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016 call trace: dump_stack+0x68/0x9b kvm_read_guest_cached+0x11d/0x150 [kvm] kvm_hv_get_assist_page+0x33/0x40 [kvm] nested_enlightened_vmentry+0x2c/0x60 [kvm_intel] nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel] nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel] vmx_vcpu_run+0x67a/0xe60 [kvm_intel] vcpu_enter_guest+0x35e/0x1bc0 [kvm] kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm] kvm_vcpu_ioctl+0x370/0x680 [kvm] ksys_ioctl+0x235/0x850 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x77/0x780 entry_syscall_64_after_hwframe+0x49/0xbe Signed-off-by: -
Miaohe Lin authored
Commit 13db7734 ("KVM: x86: don't notify userspace IOAPIC on edge EOI") said, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. And var level indicates level-triggered interrupt. But commit 3159d36a ("KVM: x86: use generic function for MSI parsing") replace var level with irq.level by mistake. Fix it by changing irq.level to irq.trig_mode. Cc: stable@vger.kernel.org Fixes: 3159d36a ("KVM: x86: use generic function for MSI parsing") Signed-off-by:
-
- 20 Feb, 2020 2 commits
-
-
Qian Cai authored
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn': arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void (*)(struct fastop *)' [-Werror=cast-function-type] rc = fastop(ctxt, (fastop_t)ctxt->execute); Fix it by using an unnamed union of a (*execute) function pointer and a (*fastop) function pointer. Fixes: 3009afc6 ("KVM: x86: Use a typedef for fastop functions") Suggested-by:Qian Cai <cai@lca.pw> Signed-off-by:
-
Paolo Bonzini authored
The "u" field in the event has three states, -1/0/1. Using u8 however means that comparison with -1 will always fail, so change to signed char. Signed-off-by:
-
- 17 Feb, 2020 2 commits
-
-
Mark Rutland authored
With VHE, running a vCPU always requires the sequence: 1. kvm_arm_vhe_guest_enter(); 2. kvm_vcpu_run_vhe(); 3. kvm_arm_vhe_guest_exit() ... and as we invoke this from the shared arm/arm64 KVM code, 32-bit arm has to provide stubs for all three functions. To simplify the common code, and make it easier to make further modifications to the arm64-specific portions in the near future, let's fold kvm_arm_vhe_guest_enter() and kvm_arm_vhe_guest_exit() into kvm_vcpu_run_vhe(). The 32-bit stubs for kvm_arm_vhe_guest_enter() and kvm_arm_vhe_guest_exit() are removed, as they are no longer used. The 32-bit stub for kvm_vcpu_run_vhe() is left as-is. There should be no functional change as a result of this patch. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Miaohe Lin authored
Fix wrong variable names and grammar error in comment. Signed-off-by:
-
