Pull IOMMU fixes from Joerg Roedel:

 - keep an important data structure in the Exynos driver around after
   kernel-init to fix a kernel-oops

 - keep SWIOTLB enabled when SME is active in the AMD IOMMU driver

 - add a missing IOTLB sync to the AMD IOMMU driver

* tag 'iommu-fixes-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Finish TLB flush in amd_iommu_unmap()
  iommu/exynos: Remove initconst attribute to avoid potential kernel oops
  iommu/amd: Do not disable SWIOTLB if SME is active

Pull DeviceTree fixes from Rob Herring:

 - Fix memory leak in error case of of_console_check

 - Increase number of reserved memory regions to 32. 16 was not enough
   on some Power systems.

 - Fix OF node refcounting for of_fwnode_graph_get_port_parent

* tag 'devicetree-fixes-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()
  drivers: of: increase MAX_RESERVED_REGIONS to 32
  of: do not leak console options

Pull powerpc fixes from Michael Ellerman:
 "A fix for a bad bug (written by me) in our livepatch handler. Removal
  of an over-zealous lockdep_assert_cpus_held() in our topology code. A
  fix to the recently added emulation of cntlz[wd]. And three small
  fixes to the recently added IMC PMU driver.

  Thanks to: Anju T Sudhakar, Balbir Singh, Kamalesh Babulal, Naveen N.
  Rao, Sandipan Das, Santosh Sivaraj, Thiago Jung Bauermann"

* tag 'powerpc-4.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix IMC initialization crash
  powerpc/perf: Add ___GFP_NOWARN flag to alloc_pages_node()
  powerpc/perf: Fix for core/nest imc call trace on cpuhotplug
  powerpc: Don't call lockdep_assert_cpus_held() from arch_update_cpu_topology()
  powerpc/lib/sstep: Fix count leading zeros instructions
  powerpc/livepatch: Fix livepatch stack access

Pull xen fixlet from Juergen Gross:
 "A minor fix correcting the cpu hotplug name for Xen guests"

* tag 'for-linus-4.14c-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/vcpu: Use a unified name about cpu hotplug state for pv and pvhvm

The function only sends the flush command to the IOMMU(s),
but does not wait for its completion when it returns. Fix
that.

Fixes: 601367d7 ('x86/amd-iommu: Remove iommu_flush_domain function')
Cc: stable@vger.kernel.org # >= 2.6.33
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Panic observed with latest firmware, and upstream kernel:

 NIP init_imc_pmu+0x8c/0xcf0
 LR  init_imc_pmu+0x2f8/0xcf0
 Call Trace:
   init_imc_pmu+0x2c8/0xcf0 (unreliable)
   opal_imc_counters_probe+0x300/0x400
   platform_drv_probe+0x64/0x110
   driver_probe_device+0x3d8/0x580
   __driver_attach+0x14c/0x1a0
   bus_for_each_dev+0x8c/0xf0
   driver_attach+0x34/0x50
   bus_add_driver+0x298/0x350
   driver_register+0x9c/0x180
   __platform_driver_register+0x5c/0x70
   opal_imc_driver_init+0x2c/0x40
   do_one_initcall+0x64/0x1d0
   kernel_init_freeable+0x280/0x374
   kernel_init+0x24/0x160
   ret_from_kernel_thread+0x5c/0x74

While registering nest imc at init, cpu-hotplug callback
nest_pmu_cpumask_init() makes an OPAL call to stop the engine. And if
the OPAL call fails, imc_common_cpuhp_mem_free() is invoked to cleanup
memory and cpuhotplug setup.

But when cleaning up the attribute group, we are dereferencing the
attribute element array without checking whether the backing element
is not NULL. This causes the kernel panic.

Add a check for the backing element prior to dereferencing the
attribute element, to handle the failing case gracefully.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
[mpe: Trim change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull device properties framework fixes from Rafael Wysocki:
 "These fix an issue related to device removal introduced during the 4.9
  cycle and fix up new functionality added recently.

  Specifics:

   - Fix a device properties management issue, introduced during the 4.9
     cycle, that causes device properties associated with a parent
     device to go away on a removal of its child in some cases (Jarkko
     Nikula).

   - Fix inconsistencies in error codes returned by a new function
     helper in the device properties framework depending on the
     underlying low-level firmware interface, DT or ACPI, by making the
     meaning of error codes returned in the ACPI case agree with the
     meaning of DT error codes in analogous situations (Sakari Ailus)"

* tag 'devprop-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: properties: Fix __acpi_node_get_property_reference() return codes
  ACPI: properties: Align return codes of __acpi_node_get_property_reference()
  device property: Track owner device of device property

Pull xfs fixes from Darrick Wong:

 - Fix a stale kernel memory exposure when logging inodes.

 - Fix some build problems with CONFIG_XFS_RT=n

 - Don't change inode mode if the acl write fails, leaving the file
   totally inaccessible.

 - Fix a dangling pointer problem when removing an attr fork under
   memory pressure.

 - Don't crash while trying to invalidate a null buffer associated with
   a corrupt metadata pointer.

* tag 'xfs-4.14-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: handle error if xfs_btree_get_bufs fails
  xfs: reinit btree pointer on attr tree inactivation walk
  xfs: Fix bool initialization/comparison
  xfs: don't change inode mode if ACL update fails
  xfs: move more RT specific code under CONFIG_XFS_RT
  xfs: Don't log uninitialised fields in inode structures

If faddr2line is given a function name which is the last one listed by
"nm -n", it will fail because it never finds the next symbol.

So teach the awk script to catch that possibility, and use 'size' to
provide the end point of the last function.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull quota fix from Jan Kara:
 "A fix for a regression in handling of quota grace times and warnings"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Generate warnings for DQUOT_SPACE_NOFAIL allocations

Pull kvm fixes from Paolo Bonzini:
 "Another latent bug related to PCID, an out-of-bounds access, and a
  submaintainer change being finally made official"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MAINTAINERS: Add Paul Mackerras as maintainer for KVM/powerpc
  KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exit
  KVM: MMU: always terminate page walks at level 1
  KVM: nVMX: update last_nonleaf_level when initializing nested EPT

Using CONFIG_OF_DYNAMIC=y uncovered an imbalance in the usecount of the
node being passed to of_fwnode_graph_get_port_parent(). Preserve the
usecount by using of_get_parent() instead of of_get_next_parent() which
don't decrement the usecount of the node passed to it.

Fixes: 3b27d00e ("device property: Move fwnode graph ops to firmware specific locations")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>

There are two types of memory reservations firmware can ask the kernel
to make in the device tree: static and dynamic.
See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt

If you have greater than 16 entries in /reserved-memory (as we do on
POWER9 systems) you would get this scary looking error message:
 [    0.000000] OF: reserved mem: not enough space all defined regions.

This is harmless if all your reservations are static (which with OPAL on
POWER9, they are).

It is not harmless if you have any dynamic reservations after the 16th.

In the first pass over the fdt to find reservations, the child nodes of
/reserved-memory are added to a static array in of_reserved_mem.c so that
memory can be reserved in a 2nd pass. The array has 16 entries. This is why,
on my dual socket POWER9 system, I get that error 4 times with 20 static
reservations.

We don't have a problem on ppc though, as in arch/powerpc/kernel/prom.c
we look at the new style /reserved-ranges property to do reservations,
and this logic was introduced in 0962e800 (well before any powernv
system shipped).

A Google search shows up no occurances of that exact error message, so we're
probably safe in that no machine that people use has memory not being reserved
when it should be.

The simple fix is to bump the length of the array to 32 which "should be
enough for everyone(TM)". The simple fix of not recording static allocations
in the array would cause problems for devices with "memory-region" properties.
A more future-proof fix is likely possible, although more invasive and this
simple fix is perfectly suitable in the meantime while a more future-proof
fix is developed.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Do not strdup() console options. It seems that the only reason for
it to be strdup()-ed was a compilation warning: printk, UART and
console drivers, for some reason, expect char pointer instead of
const char pointer. So we can just pass `of_stdout_options', but
need to cast it to char pointer. A better fix would be to change
printk, console drivers and UART to accept const char `options';
but that will take time - there are lots of drivers to update.

The patch also fixes a possible memory leak: add_preferred_console()
can fail, but we don't kfree() options.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull crypto fixes from Herbert Xu:

 - fix crashes in skcipher/shash from zero-length input.

 - fix softirq GFP_KERNEL allocation in shash_setkey_unaligned.

 - error path bug fix in xts create function.

 - fix compiler warning regressions in axis and stm32

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: shash - Fix zero-length shash ahash digest crash
  crypto: skcipher - Fix crash on zero-length input
  crypto: shash - Fix a sleep-in-atomic bug in shash_setkey_unaligned
  crypto: xts - Fix an error handling path in 'create()'
  crypto: stm32 - Try to fix hash padding
  crypto: axis - hide an unused variable

Pull livepatching fix from Jiri Kosina:

 - bugfix for handling of coming modules (incorrect handling of failure)
   from Joe Lawrence

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: unpatch all klp_objects if klp_module_coming fails

Pull HID fixes from Jiri Kosina:

 - fix for potential out-of-bounds memory access (found by fuzzing,
   likely requires specially crafted device to trigger) by Jaejoong Kim

 - two new device IDs for elecom driver from Alex Manoussakis

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-elecom: extend to fix descriptor for HUGE trackball
  HID: usbhid: fix out-of-bounds bug

Pull sound fixes from Takashi Iwai:
 "It's been a busy week for defending the attacks from fuzzer people.

  This contains various USB-audio driver fixes and sequencer core fixes
  spotted by syzkaller and other fuzzer, as well as one quirk for a
  Plantronics USB audio device"

* tag 'sound-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: caiaq: Fix stray URB at probe error path
  ALSA: seq: Fix use-after-free at creating a port
  ALSA: usb-audio: Kill stray URB at exiting
  ALSA: line6: Fix leftover URB at error-path during probe
  ALSA: line6: Fix NULL dereference at podhd_disconnect()
  ALSA: line6: Fix missing initialization before error path
  ALSA: seq: Fix copy_from_user() call inside lock
  ALSA: usb-audio: Add sample rate quirk for Plantronics P610

Merge waitid() fix from Kees Cook.

I'd have hoped that the unsafe_{get|put}_user() naming would have
avoided these kinds of stupid bugs, but no such luck.

* waitid-fix:
  waitid(): Add missing access_ok() checks

Stack trace output during a stress test:
 [    4.310049] Freeing initrd memory: 22592K
[    4.310646] rtas_flash: no firmware flash support
[    4.313341] cpuhp/64: page allocation failure: order:0, mode:0x14480c0(GFP_KERNEL|__GFP_ZERO|__GFP_THISNODE), nodemask=(null)
[    4.313465] cpuhp/64 cpuset=/ mems_allowed=0
[    4.313521] CPU: 64 PID: 392 Comm: cpuhp/64 Not tainted 4.11.0-39.el7a.ppc64le #1
[    4.313588] Call Trace:
[    4.313622] [c000000f1fb1b8e0] [c000000000c09388] dump_stack+0xb0/0xf0 (unreliable)
[    4.313694] [c000000f1fb1b920] [c00000000030ef6c] warn_alloc+0x12c/0x1c0
[    4.313753] [c000000f1fb1b9c0] [c00000000030ff68] __alloc_pages_nodemask+0xea8/0x1000
[    4.313823] [c000000f1fb1bbb0] [c000000000113a8c] core_imc_mem_init+0xbc/0x1c0
[    4.313892] [c000000f1fb1bc00] [c000000000113cdc] ppc_core_imc_cpu_online+0x14c/0x170
[    4.313962] [c000000f1fb1bc90] [c000000000125758] cpuhp_invoke_callback+0x198/0x5d0
[    4.314031] [c000000f1fb1bd00] [c00000000012782c] cpuhp_thread_fun+0x8c/0x3d0
[    4.314101] [c000000f1fb1bd60] [c0000000001678d0] smpboot_thread_fn+0x290/0x2a0
[    4.314169] [c000000f1fb1bdc0] [c00000000015ee78] kthread+0x168/0x1b0
[    4.314229] [c000000f1fb1be30] [c00000000000b368] ret_from_kernel_thread+0x5c/0x74
[    4.314313] Mem-Info:
[    4.314356] active_anon:0 inactive_anon:0 isolated_anon:0

core_imc_mem_init() at system boot use alloc_pages_node() to get memory
and alloc_pages_node() throws this stack dump when tried to allocate
memory from a node which has no memory behind it. Add a ___GFP_NOWARN
flag in allocation request as a fix.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Venkat R.B <venkatb3@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Nest/core pmu units are enabled only when it is used. A reference count is
maintained for the events which uses the nest/core pmu units. Currently in
*_imc_counters_release function a WARN() is used for notification of any
underflow of ref count.

The case where event ref count hit a negative value is, when perf session is
started, followed by offlining of all cpus in a given core.
i.e. in cpuhotplug offline path ppc_core_imc_cpu_offline() function set the
ref->count to zero, if the current cpu which is about to offline is the last
cpu in a given core and make an OPAL call to disable the engine in that core.
And on perf session termination, perf->destroy (core_imc_counters_release) will
first decrement the ref->count for this core and based on the ref->count value
an opal call is made to disable the core-imc engine.
Now, since cpuhotplug path already clears the ref->count for core and disabled
the engine, perf->destroy() decrementing again at event termination make it
negative which in turn fires the WARN_ON. The same happens for nest units.

Add a check to see if the reference count is alreday zero, before decrementing
the count, so that the ref count will not hit a negative value.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Paul is handling almost all of the powerpc related KVM patches nowadays,
so he should be mentioned in the MAINTAINERS file accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the
guest CR4. Before this CR4 loading, the guest CR4 refers to L2
CR4. Because these two CR4's are in different levels of guest, we
should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which
is used to handle guest writes to its CR4, checks the guest change to
CR4 and may fail if the change is invalid.

The failure may cause trouble. Consider we start
  a L1 guest with non-zero L1 PCID in use,
     (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0)
and
  a L2 guest with L2 PCID disabled,
     (i.e. L2 CR4.PCIDE == 0)
and following events may happen:

1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4
   into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because
   of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e.
   vcpu->arch.cr4) is left to the value of L2 CR4.

2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit,
   kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID,
   because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1
   CR3.PCID != 0, L0 KVM will inject GP to L1 guest.

Fixes: 4704d0be ("KVM: nVMX: Exiting from L2 to L1")
Cc: qemu-stable@nongnu.org
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Exynos SYSMMU registers standard platform device with sysmmu_of_match
table, what means that this table is accessed every time a new platform
device is registered in a system. This might happen also after the boot,
so the table must not be attributed as initconst to avoid potential kernel
oops caused by access to freed memory.

Fixes: 6b21a5db ("iommu/exynos: Support for device tree")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Fix more return codes for device property: Align return codes of
__acpi_node_get_property_reference().

In particular, what was missed previously:

 -EPROTO could be returned in certain cases, now -EINVAL;
 -EINVAL was returned if the property was not found, now -ENOENT;
 -EINVAL was returned also if the index was higher than the number of
         entries in a package, now -ENOENT.
Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Fixes: 3e3119d3 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_fwnode_get_reference_args(), the function implementing ACPI
support for fwnode_property_get_reference_args(), returns directly
error codes from __acpi_node_get_property_reference(). The latter
uses different error codes than the OF implementation. In particular,
the OF implementation uses -ENOENT to indicate that the property is
not found, a reference entry is empty and there are no more
references.

Document and align the error codes for property for
fwnode_property_get_reference_args() so that they match with
of_parse_phandle_with_args().

Fixes: 3e3119d3 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull rpmsg fixes from Bjorn Andersson:
 "This corrects two mistakes in the Qualcomm GLINK SMEM driver"

* tag 'rpmsg-v4.14-fixes' of git://github.com/andersson/remoteproc:
  rpmsg: glink: Fix memory leak in qcom_glink_alloc_intent()
  rpmsg: glink: Unlock on error in qcom_glink_request_intent()

Pull remoteproc fixes from Bjorn Andersson:
 "This fixes a couple of issues in the imx_rproc driver and corrects the
  Kconfig dependencies of the Qualcomm remoteproc drivers"

* tag 'rproc-v4.14-fixes' of git://github.com/andersson/remoteproc:
  remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()
  remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependencies
  remoteproc: imx_rproc: fix a couple off by one bugs

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Jason reported that a corrupted filesystem failed to replay
the log with a metadata block out of bounds warning:

XFS (dm-2): _xfs_buf_find: Block out of range: block 0x80270fff8, EOFS 0x9c40000

_xfs_buf_find() and xfs_btree_get_bufs() return NULL if
that happens, and then when xfs_alloc_fix_freelist() calls
xfs_trans_binval() on that NULL bp, we oops with:

BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8

We don't handle _xfs_buf_find errors very well, every
caller higher up the stack gets to guess at why it failed.
But we should at least handle it somehow, so return
EFSCORRUPTED here.
Reported-by: Jason L Tibbitts III <tibbs@math.uh.edu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs_attr3_root_inactive() walks the attr fork tree to invalidate the
associated blocks. xfs_attr3_node_inactive() recursively descends
from internal blocks to leaf blocks, caching block address values
along the way to revisit parent blocks, locate the next entry and
descend down that branch of the tree.

The code that attempts to reread the parent block is unsafe because
it assumes that the local xfs_da_node_entry pointer remains valid
after an xfs_trans_brelse() and re-read of the parent buffer. Under
heavy memory pressure, it is possible that the buffer has been
reclaimed and reallocated by the time the parent block is reread.
This means that 'btree' can point to an invalid memory address, lead
to a random/garbage value for child_fsb and cause the subsequent
read of the attr fork to go off the rails and return a NULL buffer
for an attr fork offset that is most likely not allocated.

Note that this problem can be manufactured by setting
XFS_ATTR_BTREE_REF to 0 to prevent LRU caching of attr buffers,
creating a file with a multi-level attr fork and removing it to
trigger inactivation.

To address this problem, reinit the node/btree pointers to the
parent buffer after it has been re-read. This ensures btree points
to a valid record and allows the walk to proceed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

If we get ENOSPC half way through setting the ACL, the inode mode
can still be changed even though the ACL does not exist. Reorder the
operation to only change the mode of the inode if the ACL is set
correctly.

Whilst this does not fix the problem with crash consistency (that requires
attribute addition to be a deferred op) it does prevent ENOSPC and other
non-fatal errors setting an xattr to be handled sanely.

This fixes xfstests generic/449.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Various utility functions and interfaces that iterate internal
devices try to reference the realtime device even when RT support is
not compiled into the kernel.

Make sure this code is excluded from the CONFIG_XFS_RT=n build,
and where appropriate stub functions to return fatal errors if
they ever get called when RT support is not present.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Prevent kmemcheck from throwing warnings about reading uninitialised
memory when formatting inodes into the incore log buffer. There are
several issues here - we don't always log all the fields in the
inode log format item, and we never log the inode the
di_next_unlinked field.

In the case of the inode log format item, this is exacerbated
by the old xfs_inode_log_format structure padding issue. Hence make
the padded, 64 bit aligned version of the structure the one we always
use for formatting the log and get rid of the 64 bit variant. This
means we'll always log the 64-bit version and so recovery only needs
to convert from the unpadded 32 bit version from older 32 bit
kernels.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Commit 77469c3f prevented setting the page as uptodate when we wrote
the right amount of data, fix that.

Fixes: 77469c3f ("9p: saner ->write_end() on failing copy into non-uptodate page")
Reviewed-by: Jan Kara <jack@suse.com>
Signed-off-by: Alexander Levin <alexander.levin@verizon.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull GPIO fixes from Linus Walleij:
 "Here are some smallish GPIO fixes for v4.14. Like with pin control:
  some build/Kconfig noise and one serious bug in a specific driver.

   - Three Kconfig/build warning fixes

   - A fix for lost edge IRQs in the OMAP driver"

* tag 'gpio-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: omap: Fix lost edge interrupts
  gpio: omap: omap_gpio_show_rev is not __init
  gpio: acpi: work around false-positive -Wstring-overflow warning
  gpio: thunderx: select IRQ_DOMAIN_HIERARCHY instead of depends on

Pull pin control fixes from Linus Walleij:
 "Two small things and a slightly larger thing in the Intel Cherryview.

   - Fix two build problems

   - Fix a regression on the Intel Cherryview interrupt path"

* tag 'pinctrl-v4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: cherryview: fix issues caused by dynamic gpio irqs mapping
  pinctrl/amd: Fix build dependency on pinmux code
  pinctrl: bcm2835: fix build warning in bcm2835_gpio_irq_handle_bank

Pull vfs fixes from Al Viro:
 "Fairly old DIO bug caught by Andreas (3.10+) and several slightly
  younger blk_rq_map_user_iov() bugs, both on map and copy codepaths
  (Vitaly and me)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bio_copy_user_iov(): don't ignore ->iov_offset
  more bio_map_user_iov() leak fixes
  fix unbalanced page refcounting in bio_map_user_iov
  direct-io: Prevent NULL pointer access in submit_page_section

caiaq driver doesn't kill the URB properly at its error path during
the probe, which may lead to a use-after-free error later.  This patch
addresses it.
Reported-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>