Get the number of VFs of a PF correctly by calling
rvu_get_pf_numvfs in rvu_switch_disable function.
Also hwvf is not required hence remove it.

Fixes: 23109f8d ("octeontx2-af: Introduce internal packet switching")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A wwan link created via the wwan_create_default_link procedure is
never notified to the user (RTM_NEWLINK), causing issues with user
tools relying on such event to track network links (NetworkManager).

This is because the procedure misses a call to rtnl_configure_link(),
which sets the link as initialized and notifies the new link (cf
proper usage in __rtnl_newlink()).

Cc: stable@vger.kernel.org
Fixes: ca374290 ("wwan: core: support default netdev creation")
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit modified the driver to accept the addition of VID 0
without doing anything, but deleting that VID still fails:

[   32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0

Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition.

Fixes: b8b79c41 ("net: dsa: mv88e6xxx: Fix adding vlan 0")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Decrease hop limit counter when deliver skb to ndp proxy.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In cases where the header straight after the tunnel header was
another ethernet header (TEB), instead of the network header,
the ECN decapsulation code would treat the ethernet header as if
it was an IP header, resulting in mishandling and possible
wrong drops or corruption of the IP header.

In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the
inner IPv4 header, and correct its checksum.

The offset of the ECT bits in an IPv4 header corresponds to the
lower 2 bits of the second octet of the destination MAC address
in the ethernet header.
The IPv4 checksum corresponds to end of the source address.

In order to reproduce:

    $ ip netns add A
    $ ip netns add B
    $ ip -n A link add _v0 type veth peer name _v1 netns B
    $ ip -n A link set _v0 up
    $ ip -n A addr add dev _v0 10.254.3.1/24
    $ ip -n A route add default dev _v0 scope global
    $ ip -n B link set _v1 up
    $ ip -n B addr add dev _v1 10.254.1.6/24
    $ ip -n B route add default dev _v1 scope global
    $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000
    $ ip -n B link set gre1 up

    # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1),
    # and the inner header has no ECT bits set:

    $ cat send_pkt.py
        #!/usr/bin/env python3
        from scapy.all import *

        pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00'
                 b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85'
                 b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb'
                 b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12'
                 b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234'
                 b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ')

        send(pkt)
    $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1
    $ sudo ip netns exec A python3 send_pkt.py

In the original packet, the source/destinatio MAC addresses are
dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26

In the received packet, they are
dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27

Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io>
for helping me pinpoint the origin.

Fixes: b7237487 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.

Fixes: 6398e23c ("tipc: standardize accept routine")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

For implicit-connect, when it's either SYN- or SYN+, an ACK should
be sent back to the client immediately. It's not appropriate for
the client to enter established state only after receiving data
from the server.

On client side, after the SYN is sent out, tipc_wait_for_connect()
should be called to wait for the ACK if timeout is set.

This patch also restricts __tipc_sendstream() to call __sendmsg()
only when it's in TIPC_OPEN state, so that the client can program
in a single loop doing both connecting and data sending like:

  for (...)
      sendmsg(dest, buf);

This makes the implicit-connect more implicit.

Fixes: b97bf3fd ("[TIPC] Initial merge")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove devm_kfree of memory where VLAN entry to RVU PF mapping
info is saved. This will be freed anyway at driver exit.
Having this could result in warning from devm_kfree() if
the memory is not allocated due to errors in rvu_nix_block_init()
before nix_setup_txvlan().

Fixes: 9a946def ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 fixes from Will Deacon:
 "A pair of arm64 fixes for -rc3. The straightforward one is a fix to
  our firmware calling stub, which accidentally started corrupting the
  link register on machines with SVE. Since these machines don't really
  exist yet, it wasn't spotted in -next.

  The other fix is a revert-and-a-bit of a patch originally intended to
  allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A
  side-effect of this change was that our pXd_set_huge() implementations
  could be replaced with generic dummy functions depending on the levels
  of page-table being used, which in turn broke the boot if we fail to
  create the linear mapping as a result of using these functions to
  operate on the pgd. Huge thanks to Michael Ellerman for modifying the
  revert so as not to regress PPC 8xx in terms of functionality.

  Anyway, that's the background and it's also available in the commit
  message along with Link tags pointing at all of the fun.

  Summary:

   - Fix hang when issuing SMC on SVE-capable system due to
     clobbered LR

   - Fix boot failure due to missing block mappings with folded
     page-table"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge"
  arm64: smccc: Save lr before calling __arm_smccc_sve_check()

Merge tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - bug fix from Haiyang for vmbus CPU assignment

 - revert of a bogus patch that went into 5.14-rc1

* tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Revert "x86/hyperv: fix logical processor creation"
  Drivers: hv: vmbus: Fix duplicate CPU assignments within a device

Pull networking fixes from David Miller:

 1) Fix type of bind option flag in af_xdp, from Baruch Siach.

 2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.

 3) PM refcnt imbakance in r8152, from Takashi Iwai.

 4) Sign extension ug in liquidio, from Colin Ian King.

 5) Mising range check in s390 bpf jit, from Colin Ian King.

 6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.

 7) Fix skb page recycling race, from Ilias Apalodimas.

 8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.

 9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.

10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
    Dumazet.

11) act_skbmod should only operate on ethernet packets, from Peilin Ye.

12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
    Abeni.

13) Fix sparx5 dependencies, from Yajun Deng.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
  dpaa2-switch: seed the buffer pool after allocating the swp
  net: sched: cls_api: Fix the the wrong parameter
  net: sparx5: fix unmet dependencies warning
  net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
  net: dsa: ensure linearized SKBs in case of tail taggers
  ravb: Remove extra TAB
  ravb: Fix a typo in comment
  net: dsa: sja1105: make VID 4095 a bridge VLAN too
  tcp: disable TFO blackhole logic by default
  sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
  net: ixp46x: fix ptp build failure
  ibmvnic: Remove the proper scrq flush
  selftests: net: add ESP-in-UDP PMTU test
  udp: check encap socket in __udp_lib_err
  sctp: update active_key for asoc when old key is being replaced
  r8169: Avoid duplicate sysfs entry creation error
  ixgbe: Fix packet corruption due to missing DMA sync
  Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
  ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
  fsl/fman: Add fibre support
  ...

Pull MMC fixes from Ulf Hansson:

 - Use kref to fix KASAN splats triggered during card removal

 - Don't allocate IDA for OF aliases

* tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Don't allocate IDA for OF aliases
  mmc: core: Use kref in place of struct mmc_blk_data::usage

Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.

To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.

Fixes: 0b1b7137 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 4th parameter in tc_chain_notify() should be flags rather than seq.
Let's change it back correctly.

Fixes: 32a4f5ec ("net: sched: introduce chain object to uapi")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
  Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y]
  Selected by [y]:
  - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lino Sanfilippo says:

====================
Fixes for KSZ DSA switch

These patches fix issues I encountered while using a KSZ9897 as a DSA
switch with a broadcom GENET network device as the DSA master device.

PATCH 1 fixes an invalid access to an SKB in case it is scattered.
PATCH 2 fixes incorrect hardware checksum calculation caused by the DSA
tag.

Changes in v2:
- instead of linearizing the SKBs only for KSZ switches ensure linearized
  SKBs for all tail taggers by clearing the feature flags NETIF_F_HW_SG and
  NETIF_F_FRAGLIST (suggested by Vladimir Oltean)

The patches have been tested with a KSZ9897 and apply against net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If the checksum calculation is offloaded to the network device (e.g due to
NETIF_F_HW_CSUM inherited from the DSA master device), the calculated
layer 4 checksum is incorrect. This is since the DSA tag which is placed
after the layer 4 data is considered as being part of the daa and thus
errorneously included into the checksum calculation.
To avoid this, always calculate the layer 4 checksum in software.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function skb_put() that is used by tail taggers to make room for the
DSA tag must only be called for linearized SKBS. However in case that the
slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the
SKB passed to the slaves transmit function may not be linearized.
Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags
for tail taggers.
Furthermore since the tagging protocol can be changed at runtime move the
code for setting up the slaves features into dsa_slave_setup_tagger().
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Align the member description comments for struct ravb_desc by
removing the extra TAB.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the typo RX->TX in comment, as the code following the comment
process TX and not RX.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This simple series of commands:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0

fails on sja1105 with the following error:
[   33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN
[   33.447710] sja1105 spi0.1: Invalid config, cannot upload
Warning: sja1105: Failed to change VLAN Ethertype.

For context, sja1105 has 3 operating modes:
- SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the
  bridge_vlans are committed to hardware

Swapping out a VLAN list and another in happens in
sja1105_build_vlan_table(), which performs a delta update procedure.
That function is called from a few places, notably from
sja1105_vlan_filtering() which is called from the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler.

The above set of 2 commands fails when run on a kernel pre-commit
8841f6e6 ("net: dsa: sja1105: make devlink property
best_effort_vlan_filtering true by default"). So the priv->vlan_state
transition that takes place is between VLAN-unaware and full VLAN
filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans
are swapped in.

So why does it fail?

Well, the bridge driver, through nbp_vlan_init(), first sets up the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then
proceeds to call nbp_vlan_add for the default_pvid.

So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in
the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge
VLANs (yet). So we have wiped the VLAN table clean, and the low-level
static config checker complains of an invalid configuration. We _will_
add the bridge VLANs using the dynamic config interface, albeit later,
when nbp_vlan_add() calls us. So it is natural that it fails.

So why did it ever work?

Surprisingly, it looks like I only tested this configuration with 2
things set up in a particular way:
- a network manager that brings all ports up
- a kernel with CONFIG_VLAN_8021Q=y

It is widely known that commit ad1afb00 ("vlan_dev: VLAN 0 should be
treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net
device that comes up. DSA treats these VLANs as bridge VLANs, and
therefore, in my testing, the list of bridge_vlans was never empty.

However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when
it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily
empty, and the sja1105_static_config_reload() call from
sja1105_vlan_filtering() will fail.

To fix this, the simplest thing is to keep VID 4095, the one used for
CPU-injected control packets since commit ed040abc ("net: dsa:
sja1105: use 4095 as the private VLAN for untagged traffic"), in the
list of bridge VLANs too, not just the list of tag_8021q VLANs. This
ensures that the list of bridge VLANs will never be empty.

Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Reported-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Multiple complaints have been raised from the TFO users on the internet
stating that the TFO blackhole logic is too aggressive and gets falsely
triggered too often.
(e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/)
Considering that most middleboxes no longer drop TFO packets, we decide
to disable the blackhole logic by setting
/proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default.

Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, in sctp_packet_config(), sctp_transport_pmtu_check() is
called to update transport pathmtu with dst's mtu when dst's mtu
has been changed by non sctp stack like xfrm.

However, this should only happen when SPP_PMTUD_ENABLE is set, no
matter where dst's mtu changed. This patch is to fix by checking
SPP_PMTUD_ENABLE flag before calling sctp_transport_pmtu_check().

Thanks Jacek for reporting and looking into this issue.

v1->v2:
  - add the missing "{" to fix the build error.

Fixes: 69fec325 ('Revert "sctp: remove sctp_transport_pmtu_check"')
Reported-by: Jacek Szafraniec <jacek.szafraniec@nokia.com>
Tested-by: Jacek Szafraniec <jacek.szafraniec@nokia.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull s390 updates from Heiko Carstens:

 - fix / add expoline usage in "DMA" code

 - fix compat vdso Makefile to avoid permanent rebuild

 - fix ftrace_update_ftrace_func to avoid NULL pointer dereference

 - update defconfigs

 - trivial coding style fix

* tag 's390-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/cpumf: fix semicolon.cocci warnings
  s390/boot: fix use of expolines in the DMA code
  s390/ftrace: fix ftrace_update_ftrace_func implementation
  s390/defconfig: allow early device mapper disks
  s390/vdso32: add vdso32.lds to targets

Pull spi fixes from Mark Brown:
 "A collection of driver specific fixes, there was a bit of a kerfuffle
  with some last minute review on hte spi-cadence-quadspi division by
  zero change but otherwise nothing terribly remarkable here - important
  fixes if you have the hardware but nothing with too wide an impact"

* tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-bcm2835: Fix deadlock
  spi: cadence: Correct initialisation of runtime PM again
  spi: cadence-quadspi: Disable Auto-HW polling
  spi: spi-cadence-quadspi: Fix division by zero warning
  spi: spi-cadence-quadspi: Revert "Fix division by zero warning"
  spi: spi-cadence-quadspi: Fix division by zero warning
  spi: mediatek: move devm_spi_register_master position
  spi: mediatek: fix fifo rx mode
  spi: atmel: Fix CS and initialization bug
  spi: stm32: fixes pm_runtime calls in probe/remove
  spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay
  spi: stm32h7: fix full duplex irq handler handling

Merge tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few driver specific fixes that came in since the merge window, plus
  a change to mark the regulator-fixed-domain DT binding as deprecated
  in order to try to to discourage any new users while a better solution
  is put in place"

* tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: hi6421: Fix getting wrong drvdata
  regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register
  regulator: fixed: Mark regulator-fixed-domain as deprecated
  regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch
  regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure
  regulator: rt5033: Fix n_voltages settings for BUCK and LDO
  regulator: rtmv20: Fix wrong mask for strobe-polarity-high

Pull AFS fixes from David Howells:

 - Fix a tracepoint that causes one of the tracing subsystem query files
   to crash if the module is loaded

 - Fix afs_writepages() to take account of whether the storage rpc
   actually succeeded when updating the cyclic writeback counter

 - Fix some error code propagation/handling

 - Fix place where afs_writepages() was setting writeback_index to a
   file position rather than a page index

* tag 'afs-fixes-20210721' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Remove redundant assignment to ret
  afs: Fix setting of writeback_index
  afs: check function return
  afs: Fix tracepoint string placement with built-in AFS

The rework of the ixp46x cpu detection left the network driver in
a half broken state:

drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init':
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function)
  290 |                 (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT;
      |                                                   ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level:
drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror]
  323 | module_init(ptp_ixp_init);

I have patches to complete the transition for a future release, but
for the moment, add the missing include statements to get it to build
again.

Fixes: 09aa9aab ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 65d6470d ("ibmvnic: clean pending indirect buffs during reset")
intended to remove the call to ibmvnic_tx_scrq_flush() when the
->resetting flag is true and was tested that way. But during the final
rebase to net-next, the hunk got applied to a block few lines below
(which happened to have the same diff context) and the wrong call to
ibmvnic_tx_scrq_flush() got removed.

Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring
the one that was incorrectly removed.

Fixes: 65d6470d ("ibmvnic: clean pending indirect buffs during reset")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 450605c2.
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Vadim Fedorenko ays:

====================
Fix PMTU for ESP-in-UDP encapsulation

Bug 213669 uncovered regression in PMTU discovery for UDP-encapsulated
routes and some incorrect usage in udp tunnel fields. This series fixes
problems and also adds such case for selftests

v3:
 - update checking logic to account SCTP use case
v2:
 - remove refactor code that was in first patch
 - move checking logic to __udp{4,6}_lib_err_encap
 - add more tests, especially routed configuration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The case of ESP in UDP encapsulation was not covered before. Add
cases of local changes of MTU and difference on routed path.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d26796ae ("udp: check udp sock encap_type in __udp_lib_err")
added checks for encapsulated sockets but it broke cases when there is
no implementation of encap_err_lookup for encapsulation, i.e. ESP in
UDP encapsulation. Fix it by calling encap_err_lookup only if socket
implements this method otherwise treat it as legal socket.

Fixes: d26796ae ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported a call trace:

  BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
  Call Trace:
   sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
   sctp_set_owner_w net/sctp/socket.c:131 [inline]
   sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865
   sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027
   inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821
   sock_sendmsg_nosec net/socket.c:703 [inline]
   sock_sendmsg+0xcf/0x120 net/socket.c:723

This is an use-after-free issue caused by not updating asoc->shkey after
it was replaced in the key list asoc->endpoint_shared_keys, and the old
key was freed.

This patch is to fix by also updating active_key for asoc when old key is
being replaced with a new one. Note that this issue doesn't exist in
sctp_auth_del_key_id(), as it's not allowed to delete the active_key
from the asoc.

Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key")
Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When registering the MDIO bus for a r8169 device, we use the PCI
bus/device specifier as a (seemingly) unique device identifier.
However the very same BDF number can be used on another PCI segment,
which makes the driver fail probing:

[ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003)
[ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700'
....
[ 27.684858] libphy: mii_bus r8169-700 failed to register
[ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22

Add the segment number to the device name to make it more unique.

This fixes operation on ARM N1SDP boards, with two boards connected
together to form an SMP system, and all on-board devices showing up
twice, just on different PCI segments. A similar issue would occur on
large systems with many PCI slots and multiple RTL8169 NICs.

Fixes: f1e911d5 ("r8169: add basic phylib support")
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
[Andre: expand commit message, use pci_domain_nr()]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable ret is set to -ENOENT and -ENOMEM but this value is never
read as it is overwritten or not used later on, hence it is a
redundant assignment and can be removed.

Cleans up the following clang-analyzer warning:

fs/afs/dir.c:2014:4: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].

fs/afs/dir.c:659:2: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].

[DH made the following modifications:

 - In afs_rename(), -ENOMEM should be placed in op->error instead of ret,
   rather than the assignment being removed entirely.  afs_put_operation()
   will pick it up from there and return it.

 - If afs_sillyrename() fails, its error code should be placed in op->error
   rather than in ret also.
]

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/1619691492-83866-1-git-send-email-jiapeng.chong@linux.alibaba.com
Link: https://lore.kernel.org/r/162609465444.3133237.7562832521724298900.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162610729052.3408253.17364333638838151299.stgit@warthog.procyon.org.uk/ # v2

Fix afs_writepages() to always set mapping->writeback_index to a page index
and not a byte position[1].

Fixes: 31143d5d ("AFS: implement basic file write support")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/CAB9dFdvHsLsw7CMnB+4cgciWDSqVjuij4mH3TaXnHQB8sz5rHw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/162610728339.3408253.4604750166391496546.stgit@warthog.procyon.org.uk/ # v2 (no v1)

Static analysis reports this problem

write.c:773:29: warning: Assigned value is garbage or undefined
  mapping->writeback_index = next;
                           ^ ~~~~
The call to afs_writepages_region() can return without setting
next.  So check the function return before using next.

Changes:
 ver #2:
   - Need to fix the range_cyclic case also[1].

Fixes: e87b03f5 ("afs: Prepare for use of THPs")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20210430155031.3287870-1-trix@redhat.com
Link: https://lore.kernel.org/r/CAB9dFdvHsLsw7CMnB+4cgciWDSqVjuij4mH3TaXnHQB8sz5rHw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/162609464716.3133237.10354897554363093252.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162610727640.3408253.8687445613469681311.stgit@warthog.procyon.org.uk/ # v2

To quote Alexey[1]:

    I was adding custom tracepoint to the kernel, grabbed full F34 kernel
    .config, disabled modules and booted whole shebang as VM kernel.

    Then did

	perf record -a -e ...

    It crashed:

	general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
	CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
	RIP: 0010:t_show+0x22/0xd0

    Then reproducer was narrowed to

	# cat /sys/kernel/tracing/printk_formats

    Original F34 kernel with modules didn't crash.

    So I started to disable options and after disabling AFS everything
    started working again.

    The root cause is that AFS was placing char arrays content into a
    section full of _pointers_ to strings with predictable consequences.

    Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
    CM_NAME macro.

    Steps to reproduce:

	CONFIG_AFS=y
	CONFIG_TRACING=y

	# cat /sys/kernel/tracing/printk_formats

Fix this by the following means:

 (1) Add enum->string translation tables in the event header with the AFS
     and YFS cache/callback manager operations listed by RPC operation ID.

 (2) Modify the afs_cb_call tracepoint to print the string from the
     translation table rather than using the string at the afs_call name
     pointer.

 (3) Switch translation table depending on the service we're being accessed
     as (AFS or YFS) in the tracepoint print clause.  Will this cause
     problems to userspace utilities?

     Note that the symbolic representation of the YFS service ID isn't
     available to this header, so I've put it in as a number.  I'm not sure
     if this is the best way to do this.

 (4) Remove the name wrangling (CM_NAME) macro and put the names directly
     into the afs_call_type structs in cmservice.c.

Fixes: 8e8d7f13 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1]
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2

This reverts commit c742199a.

c742199a ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
breaks arm64 in at least two ways for configurations where PUD or PMD
folding occur:

  1. We no longer install huge-vmap mappings and silently fall back to
     page-granular entries, despite being able to install block entries
     at what is effectively the PGD level.

  2. If the linear map is backed with block mappings, these will now
     silently fail to be created in alloc_init_pud(), causing a panic
     early during boot.

The pgtable selftests caught this, although a fix has not been
forthcoming and Christophe is AWOL at the moment, so just revert the
change for now to get a working -rc3 on which we can queue patches for
5.15.

A simple revert breaks the build for 32-bit PowerPC 8xx machines, which
rely on the default function definitions when the corresponding
page-table levels are folded, since commit a6a8f7c4 ("powerpc/8xx:
add support for huge pages on VMAP and VMALLOC"), eg:

  powerpc64-linux-ld: mm/vmalloc.o: in function `vunmap_pud_range':
  linux/mm/vmalloc.c:362: undefined reference to `pud_clear_huge'

To avoid that, add stubs for pud_clear_huge() and pmd_clear_huge() in
arch/powerpc/mm/nohash/8xx.c as suggested by Christophe.

Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c742199a ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
[mpe: Fold in 8xx.c changes from Christophe and mention in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linux-arm-kernel/CAMuHMdXShORDox-xxaeUfDW3wx2PeggFSqhVSHVZNKCGK-y_vQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20210717160118.9855-1-jonathan@marek.ca
Link: https://lore.kernel.org/r/87r1fs1762.fsf@mpe.ellerman.id.auSigned-off-by: Will Deacon <will@kernel.org>