- 30 Sep, 2021 11 commits
-
-
Aya Levin authored
When in Real-time mode, HW clock is synced with the PTP daemon. Hence driver should not re-calibrate the next pulse (via MTPPSE repetitive events mechanism). This patch arms repetitive events only in free-running mode. Fixes: 432119de ("net/mlx5: Add cyc2time HW translation mode support") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Allow configuration of 1PPS start time only with time-stamp representing a round second. Prior to this patch driver allowed setting of a non-round-second which is not supported by the device. Avoid unexpected behavior by restricting start-time configuration to a round-second. Fixes: 4272f9b8 ("net/mlx5e: Change 1PPS out scheme") Signed-off-by:
-
Moshe Shemesh authored
Flow counter is allocated in eswitch legacy acl setting functions without checking if already allocated by previous setting. Add a check to avoid such double allocation. Fixes: 07bab950 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: ea651a86 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
* Add netdev->tc_to_txq rollback in case of failure in mlx5e_update_netdev_queues(). * Fix broken transition between the two modes: MQPRIO DCB mode with tc==8, and MQPRIO channel mode. * Disable MQPRIO channel mode if re-attaching with a different number of channels. * Improve code sharing. Fixes: ec60c458 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
The value for maximum number of channels is first calculated based on the netdev's profile and current function resources (specifically, number of MSIX vectors, which depends among other things on the number of online cores in the system). This value is then used to calculate the netdev's number of rxqs/txqs. Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs is constant and we must not exceed it. To achieve this, keep the maximum number of channels in sync upon any netdevice re-attach. Use mlx5e_get_max_num_channels() for calculating the number of netdev's rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which coinsiders core device resources, profile, and netdev) to init or update priv->max_nch. Before this patch, the value of priv->max_nch might get out of sync, mistakenly allowing accesses to out-of-bounds objects, which would crash the system. Track the number of channels stats structures used in a separate field, as they are persistent to suspend/resume operations. All the collected stats of every channel index that ever existed should be preserved. They are reset only when struct mlx5e_priv is, in mlx5e_priv_cleanup(), which is part of the profile changing flow. There is no point anymore in blocking a profile change due to max_nch mismatch in mlx5e_netdev_change_profile(). Remove the limitation. Fixes: a1f240f1 ("net/mlx5e: Adjust to max number of channles when re-attaching") Signed-off-by:
-
Raed Salem authored
Currently in Rx data path IPsec crypto offloaded packets uses csum_none flag, so checksum is handled by the stack, this naturally have some performance/cpu utilization impact on such flows. As Nvidia NIC starting from ConnectX6DX provides checksum complete value out of the box also for such flows there is no sense in taking csum_none path, furthermore the stack (xfrm) have the method to handle checksum complete corrections for such flows i.e. IPsec trailer removal and consequently checksum value adjustment. Because of the above and in addition the ConnectX6DX is the first HW which supports IPsec crypto offload then it is safe to report csum complete for IPsec offloaded traffic. Fixes: b2ac7541 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by:
Raed Salem <raeds@nvidia.com> Signed-off-by:
-
Eric Dumazet authored
Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wong Vee Khee authored
When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY, and the PHY is advertising EEE by default, we need to enable EEE on the xPCS side too, instead of having user to manually trigger the enabling config via ethtool. Fixed this by adding xpcs_config_eee() call in stmmac_eee_init(). Fixes: 7617af3d ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Jakub Kicinski authored
struct dev_addr_list is used for device addresses, unicast addresses and multicast addresses. The first of those needs special handling of the main address - netdev->dev_addr points directly the data of the entry and drivers write to it freely, so we can't maintain it in the rbtree (for now, at least, to be fixed in net-next). Current work around sprinkles special handling of the first address on the list throughout the code but it missed the case where address is being added. First address will not be visible during subsequent adds. Syzbot found a warning where unicast addresses are modified without holding the rtnl lock, tl;dr is that team generates the same modification multiple times, not necessarily when right locks are held. In the repro we have: macvlan -> team -> veth macvlan adds a unicast address to the team. Team then pushes that address down to its memebers (veths). Next something unrelated makes team sync member addrs again, and because of the bug the addr entries get duplicated in the veths. macvlan gets removed, removes its addr from team which removes only one of the duplicated addresses from veths. This removal is done under rtnl. Next syzbot uses iptables to add a multicast addr to team (which does not hold rtnl lock). Team syncs veth addrs, but because veths' unicast list still has the duplicate it will also get sync, even though this update is intended for mc addresses. Again, uc address updates need rtnl lock, boom. Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com Fixes: 406f42fa ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vlad Buslov authored
Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ 352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17 [ 352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003 [ 352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40 [ 352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f [ 352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088 [ 352.843784] Allocated by task 2960: [ 352.844451] kasan_save_stack+0x1b/0x40 [ 352.845173] __kasan_kmalloc+0x7c/0x90 [ 352.845873] fl_change+0x282/0x22db [cls_flower] [ 352.846696] tc_new_tfilter+0x6cf/0x1180 [ 352.847493] rtnetlink_rcv_msg+0x471/0x550 [ 352.848323] netlink_rcv_skb+0xc6/0x1f0 [ 352.849097] netlink_unicast+0x353/0x480 [ 352.849886] netlink_sendmsg+0x396/0x680 [ 352.850678] sock_sendmsg+0x6c/0x80 [ 352.851398] ____sys_sendmsg+0x3a5/0x3c0 [ 352.852202] ___sys_sendmsg+0xd8/0x140 [ 352.852967] __sys_sendmsg+0xb3/0x130 [ 352.853718] do_syscall_64+0x35/0x80 [ 352.854457] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.855830] Freed by task 7: [ 352.856421] kasan_save_stack+0x1b/0x40 [ 352.857139] kasan_set_track+0x1c/0x30 [ 352.857854] kasan_set_free_info+0x20/0x30 [ 352.858609] __kasan_slab_free+0xed/0x130 [ 352.859348] kfree+0xa7/0x3c0 [ 352.859951] process_one_work+0x44d/0x780 [ 352.860685] worker_thread+0x2e2/0x7e0 [ 352.861390] kthread+0x1f4/0x220 [ 352.862022] ret_from_fork+0x1f/0x30 [ 352.862955] Last potentially related work creation: [ 352.863758] kasan_save_stack+0x1b/0x40 [ 352.864378] kasan_record_aux_stack+0xab/0xc0 [ 352.865028] insert_work+0x30/0x160 [ 352.865617] __queue_work+0x351/0x670 [ 352.866261] rcu_work_rcufn+0x30/0x40 [ 352.866917] rcu_core+0x3b2/0xdb0 [ 352.867561] __do_softirq+0xf6/0x386 [ 352.868708] Second to last potentially related work creation: [ 352.869779] kasan_save_stack+0x1b/0x40 [ 352.870560] kasan_record_aux_stack+0xab/0xc0 [ 352.871426] call_rcu+0x5f/0x5c0 [ 352.872108] queue_rcu_work+0x44/0x50 [ 352.872855] __fl_put+0x17c/0x240 [cls_flower] [ 352.873733] fl_delete+0xc7/0x100 [cls_flower] [ 352.874607] tc_del_tfilter+0x510/0xb30 [ 352.886085] rtnetlink_rcv_msg+0x471/0x550 [ 352.886875] netlink_rcv_skb+0xc6/0x1f0 [ 352.887636] netlink_unicast+0x353/0x480 [ 352.888285] netlink_sendmsg+0x396/0x680 [ 352.888942] sock_sendmsg+0x6c/0x80 [ 352.889583] ____sys_sendmsg+0x3a5/0x3c0 [ 352.890311] ___sys_sendmsg+0xd8/0x140 [ 352.891019] __sys_sendmsg+0xb3/0x130 [ 352.891716] do_syscall_64+0x35/0x80 [ 352.892395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.893666] The buggy address belongs to the object at ffff8881c8251000 which belongs to the cache kmalloc-2k of size 2048 [ 352.895696] The buggy address is located 1152 bytes inside of 2048-byte region [ffff8881c8251000, ffff8881c8251800) [ 352.897640] The buggy address belongs to the page: [ 352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250 [ 352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0 [ 352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00 [ 352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 352.905861] page dumped because: kasan: bad access detected [ 352.907323] Memory state around the buggy address: [ 352.908218] ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.909471] ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.912012] ^ [ 352.912642] ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.913919] ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.915185] ================================================================== Fixes: d39d7149 ("idr: introduce idr_for_each_entry_continue_ul()") Signed-off-by:Vlad Buslov <vladbu@nvidia.com> Acked-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Paolo Abeni authored
Syzkaller reported a false positive deadlock involving the nl socket lock and the subflow socket lock: MPTCP: kernel_bind error, err=-98 ============================================ WARNING: possible recursive locking detected 5.15.0-rc1-syzkaller #0 Not tainted -------------------------------------------- syz-executor998/6520 is trying to acquire lock: ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 but task is already holding lock: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-sk_lock-AF_INET); lock(k-sk_lock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor998/6520: #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline] #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 stack backtrace: CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline] check_deadlock kernel/locking/lockdep.c:2987 [inline] validate_chain kernel/locking/lockdep.c:3776 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_fast+0x36/0x100 net/core/sock.c:3229 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 __sock_release net/socket.c:649 [inline] sock_release+0x87/0x1b0 net/socket.c:677 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504 kernel_sendpage net/socket.c:3501 [inline] sock_sendpage+0xe5/0x140 net/socket.c:1003 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x110/0x180 fs/splice.c:936 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891 do_splice_direct+0x1b3/0x280 fs/splice.c:979 do_sendfile+0xae9/0x1240 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1314 [inline] __se_sys_sendfile64 fs/read_write.c:1300 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f215cb69969 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08 R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 the problem originates from uncorrect lock annotation in the mptcp code and is only visible since commit 2dcb96ba ("net: core: Correct the sock::sk_lock.owned lockdep annotations"), but is present since the port-based endpoint support initial implementation. This patch addresses the issue introducing a nested variant of lock_sock_fast() and using it in the relevant code path. Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Fixes: 2dcb96ba ("net: core: Correct the sock::sk_lock.owned lockdep annotations") Suggested-by:Thomas Gleixner <tglx@linutronix.de> Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
- 29 Sep, 2021 13 commits
-
-
Florian Fainelli authored
When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: -
Guangbin Huang authored
Currently, the firmware compatible features are enabled in PF driver initialization process, but they are not disabled in PF driver deinitialization process and firmware keeps these features in enabled status. In this case, if load an old PF driver (for example, in VM) which not support the firmware compatible features, firmware will still send mailbox message to PF when link status changed and PF will print "un-supported mailbox message, code = 201". To fix this problem, disable these firmware compatible features in PF driver deinitialization process. Fixes: ed8fb4b2 ("net: hns3: add link change event report") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Guangbin Huang authored
Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8d ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by:
-
Guangbin Huang authored
If unicast mac address table is full, and user add a new mac address, the unicast promisc needs to be enabled for the new unicast mac address can be used. So does the multicast promisc. Now this feature has been implemented for PF, and VF should be implemented too. When the mac table of VF is overflow, PF will enable promisc for this VF. Fixes: 1e6e7610 ("net: hns3: configure promisc mode for VF asynchronously") Signed-off-by:
-
Jian Shen authored
Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b56 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jian Shen authored
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is supposed to set when enable multiple TCs with ets. But the driver mixed the flags when updating the tm configuration. Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE too, so remove the unnecessary limitation. Fixes: 5a5c9091 ("net: hns3: add support for tc mqprio offload") Signed-off-by:
-
Jian Shen authored
For destroy mqprio is irreversible in stack, so it's unnecessary to rollback the tc configuration when destroy mqprio failed. Otherwise, it may cause the configuration being inconsistent between driver and netstack. As the failure is usually caused by reset, and the driver will restore the configuration after reset, so it can keep the configuration being consistent between driver and hardware. Fixes: 5a5c9091 ("net: hns3: add support for tc mqprio offload") Signed-off-by:
-
Jian Shen authored
Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by:
-
Jian Shen authored
hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e8884027 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by:
-
Feng Zhou authored
The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. Fixes: 4a9b32f3 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by:
Feng Zhou <zhoufeng.zf@bytedance.com> Tested-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Thomas Gleixner authored
The sequence count bridge_mcast_querier::seq is protected by net_bridge::multicast_lock but seqcount_init() does not associate the seqcount with the lock. This leads to a warning on PREEMPT_RT because preemption is still enabled. Let seqcount_init() associate the seqcount with lock that protects the write section. Remove lockdep_assert_held_once() because lockdep already checks whether the associated lock is held. Fixes: 67b746f9 ("net: bridge: mcast: make sure querier port/address updates are consistent") Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.deSigned-off-by:
-
Cai Huoqing authored
The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by:Cai Huoqing <caihuoqing@baidu.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.comSigned-off-by:
-
- 28 Sep, 2021 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-28 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 14 day(s) which contain a total of 11 files changed, 139 insertions(+), 53 deletions(-). The main changes are: 1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk. 2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh. 3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann. 4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer. 6) Fix return value handling for struct_ops BPF programs, from Hou Tao. 7) Various fixes to BPF selftests, from Jiri Benc. ==================== Signed-off-by: -
Arnd Bergmann authored
This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Horatiu Vultur authored
According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c39 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
-
Kuniyuki Iwashima authored
unix_create1() returns NULL on error, and the callers assume that it never fails for reasons other than out of memory. So, the callers always return -ENOMEM when unix_create1() fails. However, it also returns NULL when the number of af_unix sockets exceeds twice the limit controlled by sysctl: fs.file-max. In this case, the callers should return -ENFILE like alloc_empty_file(). This patch changes unix_create1() to return the correct error value instead of NULL on error. Out of curiosity, the assumption has been wrong since 1999 due to this change introduced in 2.2.4 [0]. diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c --- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999 +++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999 @@ -388,6 +413,9 @@ { struct sock *sk; + if (atomic_read(&unix_nr_socks) >= 2*max_files) + return NULL; + MOD_INC_USE_COUNT; sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1); if (!sk) { [0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
Eric Dumazet authored
up->corkflag field can be read or written without any lock. Annotate accesses to avoid possible syzbot/KCSAN reports. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Randy Dunlap authored
When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aaron Young <aaron.young@oracle.com> Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by:
-
Shannon Nelson authored
Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993 ("ionic: pull per-q stats work out of queue loops") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tDavid S. Miller authored
nguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-09-27 This series contains updates to e100 driver only. Jake corrects under allocation of register buffer due to incorrect calculations and fixes buffer overrun of register dump. ==================== Signed-off-by: -
Arnd Bergmann authored
Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: -
Arnd Bergmann authored
An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f8 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Johan Almbladh authored
Fix the case where the dst register maps to %rax as otherwise this produces an incorrect mapping with the implementation in 981f94c3 ("bpf: Add bitwise atomic instructions") as %rax is clobbered given it's part of the cmpxchg as operand. The issue is similar to b29dd96b ("bpf, x86: Fix BPF_FETCH atomic and/or/ xor with r0 as src") just that the case of dst register was missed. Before, dst=r0 (%rax) src=r2 (%rsi): [...] c5: mov %rax,%r10 c8: mov 0x0(%rax),%rax <---+ (broken) cc: mov %rax,%r11 | cf: and %rsi,%r11 | d2: lock cmpxchg %r11,0x0(%rax) <---+ d8: jne 0x00000000000000c8 | da: mov %rax,%rsi | dd: mov %r10,%rax | [...] | | After, dst=r0 (%rax) src=r2 (%rsi): | | [...] | da: mov %rax,%r10 | dd: mov 0x0(%r10),%rax <---+ (fixed) e1: mov %rax,%r11 | e4: and %rsi,%r11 | e7: lock cmpxchg %r11,0x0(%r10) <---+ ed: jne 0x00000000000000dd ef: mov %rax,%rsi f2: mov %r10,%rax [...] The remaining combinations were fine as-is though: After, dst=r9 (%r15) src=r0 (%rax): [...] dc: mov %rax,%r10 df: mov 0x0(%r15),%rax e3: mov %rax,%r11 e6: and %r10,%r11 e9: lock cmpxchg %r11,0x0(%r15) ef: jne 0x00000000000000df _ f1: mov %rax,%r10 | (unneeded, but f4: mov %r10,%rax _| not a problem) [...] After, dst=r9 (%r15) src=r4 (%rcx): [...] de: mov %rax,%r10 e1: mov 0x0(%r15),%rax e5: mov %rax,%r11 e8: and %rcx,%r11 eb: lock cmpxchg %r11,0x0(%r15) f1: jne 0x00000000000000e1 f3: mov %rax,%rcx f6: mov %r10,%rax [...] The case of dst == src register is rejected by the verifier and therefore not supported, but x86 JIT also handles this case just fine. After, dst=r0 (%rax) src=r0 (%rax): [...] eb: mov %rax,%r10 ee: mov 0x0(%r10),%rax f2: mov %rax,%r11 f5: and %r10,%r11 f8: lock cmpxchg %r11,0x0(%r10) fe: jne 0x00000000000000ee 100: mov %rax,%r10 103: mov %r10,%rax [...] Fixes: 981f94c3 ("bpf: Add bitwise atomic instructions") Reported-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Brendan Jackman <jackmanb@google.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Jiri Benc authored
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override a greater rp_filter value on the individual interfaces. We also need to set net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way, they'll also get their own rp_filter value of zero. Fixes: 0fde56e4 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
When building bpf selftest with make -j, I'm randomly getting build failures such as this one: In file included from progs/bpf_flow.c:19: [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found #include "bpf_helper_defs.h" ^~~~~~~~~~~~~~~~~~~ The file that fails the build varies between runs but it's always in the progs/ subdir. The reason is a missing make dependency on libbpf for the .o files in progs/. There was a dependency before commit 3ac2e20f but that commit removed it to prevent unneeded rebuilds. However, that only works if libbpf has been built already; the 'wildcard' prerequisite does not trigger when there's no bpf_helper_defs.h generated yet. Keep the libbpf as an order-only prerequisite to satisfy both goals. It is always built before the progs/ objects but it does not trigger unnecessary rebuilds by itself. Fixes: 3ac2e20f ("selftests/bpf: BPF object files should depend only on libbpf headers") Signed-off-by:Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
BPF test infra has some hacks in place which kzalloc() a socket and perform minimum init via sock_net_set() and sock_init_data(). As a result, the sk's skcd->cgroup is NULL since it didn't go through proper initialization as it would have been the case from sk_alloc(). Rather than re-adding a NULL test in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test socket. The latter also allows to get rid of the bpf_sk_storage_free() special case. Fixes: 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: b7a1848e ("bpf: add BPF_PROG_TEST_RUN support for flow dissector") Fixes: 2cb494a3 ("bpf: add tests for direct packet access from CGROUP_SKB") Reported-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com Reported-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com Signed-off-by: -
Daniel Borkmann authored
If cgroup_sk_alloc() is called from interrupt context, then just assign the root cgroup to skcd->cgroup. Prior to commit 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather than re-adding the NULL-test to the fast-path we can just assign it once from cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp directly does /not/ change behavior for callers of sock_cgroup_ptr(). syzkaller was able to trigger a splat in the legacy netrom code base, where the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc() and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects a non-NULL object. There are a few other candidates aside from netrom which have similar pattern where in their accept-like implementation, they just call to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the corresponding cgroup_sk_clone() which then inherits the cgroup from the parent socket. None of them are related to core protocols where BPF cgroup programs are running from. However, in future, they should follow to implement a similar inheritance mechanism. Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID configuration, the same issue was exposed also prior to 8520e224 due to commit e876ecc6 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") which added the early in_interrupt() return back then. Fixes: 8520e224 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: e876ecc6 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net
-
Kumar Kartikeya Dwivedi authored
When a BPF object is compiled without BTF info (without -g), trying to link such objects using bpftool causes a SIGSEGV due to btf__get_nr_types accessing obj->btf which is NULL. Fix this by checking for the NULL pointer, and return error. Reproducer: $ cat a.bpf.c extern int foo(void); int bar(void) { return foo(); } $ cat b.bpf.c int foo(void) { return 0; } $ clang -O2 -target bpf -c a.bpf.c $ clang -O2 -target bpf -c b.bpf.c $ bpftool gen obj out a.bpf.o b.bpf.o Segmentation fault (core dumped) After fix: $ bpftool gen obj out a.bpf.o b.bpf.o libbpf: failed to find BTF info for object 'a.bpf.o' Error: failed to link 'a.bpf.o': Unknown error -22 (-22) Fixes: a4634922 (libbpf: Add linker extern resolution support for functions and global variables) Signed-off-by:Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
-
