this improves the Documentation for the DC395 driver for 2.5.
 dc395x.txt |   94 ++++++++++++++++++++++++++++++++++++++++---------------------
 1 files changed, 62 insertions(+), 32 deletions(-)

When a SCSI disk is added and it returns a NOT READY the SD driver is 
automatically sending a START_UNIT command to spin the device up.  While this 
may be the desired behavior for many if not most devices not all devices 
either want or need this.  The attached patch provides a mechanism via the 
device_list that allows a device to be defined to disable the automatic start 
being issued on an add.

The patch also modifies the device_list for several devices that would prefer 
to not have the start command issued. 

In the old days, ancient scsi devices understood 6-byte commands
and more recent ones also understood 10-byte commands.
Thus, we had a "ten" flag indicating that 10-byte commands worked.

These days, especially for usb-storage devices, the opposite
sometimes holds - 10-byte commands are supported, but 6-byte commands
are not.

The patch below changes the field ten into the pair of fields
use_10_for_rw, use_10_for_ms set initially when the driver
thinks these are supported. Ifthe device returns ILLEGAL_REQUEST
they are cleared.

This patch obsoletes a large amount of code in usb-storage,
and not only that, once the subsequent patch removes all this
usb-storage code many devices will work that hang today.


Andries

We must loop on UNIT ATTENTION sense (to clear the condition).  However, the code 
is assuming that a sense condition will always be accompanied by a not good status.
We have several drivers in the tree that return GOOD with DRIVER_SENSE, so make the
loop condition reflect this.

The host variable is now passed in, so we shouldn't have a
similar variable defined in the proc_info routine

Request port before using it.

into raven.il.steeleye.com:/home/jejb/BK/scsi-misc-2.5

Yeah, I know the method is obsolete but for proper refcounting we
need to get rid of all those scsi_host_hn_get() abusers.

scsi_host_hn_get() and scsi_host_put() are not exported anymore
after this patch.

This is a catch up, applying the patch that Andries
Brouwer sent a while back. It will apply to lk 2.5.69
and 2.5.69-bk10 .

this fix makes sure that all test in irq handling in that
driver are for NULL thus fixing an oops.

In the sysfs scsi host reference counting merge the call to a legacy hosts
release function was removed.

This patch adds the call back in.

This patch was tested with insmod / rmmod on LLDDs using the legacy interface
and LLDDs using the new interface:

Legacy Interface:
qla2xxx-v8.00.00b1
qlogicisp
aic7xxx_old (Does not call scsi_unregister in release, but unloaded)

New Interface:
scsi_debug
aic7xxx (Many illegal context warnings caused by mid vs LLDD primitive
         mixing, but appears to unload clean).

 drivers/scsi/hosts.c |    4 ++++
 1 files changed, 4 insertions(+)

This fixes the problem that adapter id's are not the minor number for the
i2c-dev devices anymore.  Also adds a i2c-dev class to let userspace know
which i2c-dev device is bound to which i2c adapter.

into penguin.transmeta.com:/home/torvalds/v2.5/linux

into penguin.transmeta.com:/home/torvalds/v2.5/linux

SGI Modid: 2.5.x-xfs:slinx:149409a

SGI Modid: 2.5.x-xfs:slinx:149400a

the rest of XFS.  Fix numerous crimes against whitespace.

SGI Modid: 2.5.x-xfs:slinx:149398a

which is unnecessary in log recovery, clarify some recovery debug code.

SGI Modid: 2.5.x-xfs:slinx:149396a

field from the xfs_mount structure to the log structure (saves a couple
of pointer dereferences when writing to the log, with v2 logs only).

SGI Modid: 2.5.x-xfs:slinx:149395a

SGI Modid: 2.5.x-xfs:slinx:149232a

one spot, which lets us keep more common code in sync, 2.4/2.5 and is
slightly cleaner anyway.

SGI Modid: 2.5.x-xfs:slinx:149231a

changes to make log recovery respect the log device sector size.

SGI Modid: 2.5.x-xfs:slinx:149230a

basically turned it off.

SGI Modid: 2.5.x-xfs:slinx:148955a

SGI Modid: 2.5.x-xfs:slinx:148940a

SGI Modid: 2.5.x-xfs:slinx:148933a

record write during log recovery head/tail calculations.

SGI Modid: 2.5.x-xfs:slinx:148895a

SGI Modid: 2.5.x-xfs:slinx:148598a

SGI Modid: 2.5.x-xfs:slinx:148433a

SGI Modid: 2.5.x-xfs:slinx:148595a

SGI Modid: 2.5.x-xfs:slinx:148415a

SGI Modid: 2.5.x-xfs:slinx:148285a

SGI Modid: 2.5.x-xfs:slinx:132737a

SGI Modid: 2.5.x-xfs:slinx:147932a

Noticed by Julie DeWandel <jdewand@redhat.com>.

do_fork() needs to return the pid (or error), not the pointer to the
resulting process structure.  The process structure may not even be
valid any more, since do_fork() has already woken the process up (and as
a result it might already have done its thing and gone away).

Besides, doing it this way cleans up the users, which all really just
wanted the pid or error number _anyway_.

This fixes the x86 users, other architectures need to be fixed up as
well.

A familar type of Oops: d_path() can return an error ENAMETOOLONG, and
if we fail to test a segfault occurs.

So we must test.  What we do is a different matter.  Rather arbitrarily
I return the string " (too long)" for use in /proc/mounts.

Several SCSI drivers confuse CHECK_CONDITION and CHECK_CONDITION << 1.
One of them is NCR5380.c. Below a patch adding status_byte() twice.

(On the other hand, sun3_NCR5380.c does this right, and generally
looks better. Maybe they can be merged eventually.)