- 07 Oct, 2021 32 commits
-
-
Mark Brown authored
Daniel Baluta <daniel.baluta@nxp.com>: From: Daniel Baluta <daniel.baluta@nxp.com> This patchseries adds new helpers in order to reduce code duplication and prepare for compress audio support with SOF. Bud Liviu-Alexandru (1): ASoC: SOF: Make Intel IPC stream ops generic Daniel Baluta (3): ASoC: SOF: Introduce snd_sof_mailbox_read / snd_sof_mailbox_write callbacks ASoC: SOF: imx: Use newly introduced generic IPC stream ops ASoC: SOF: Introduce fragment elapsed notification API sound/soc/sof/Kconfig | 4 ++ sound/soc/sof/Makefile | 3 +- sound/soc/sof/compress.c | 51 +++++++++++++++++++ sound/soc/sof/imx/Kconfig | 2 + sound/soc/sof/imx/imx8.c | 39 +++++++------- sound/soc/sof/imx/imx8m.c | 26 ++++------ sound/soc/sof/intel/Makefile | 3 -- sound/soc/sof/intel/apl.c | 4 ++ sound/soc/sof/intel/bdw.c | 12 +++-- sound/soc/sof/intel/byt.c | 24 ++++++--- sound/soc/sof/intel/cnl.c | 4 ++ sound/soc/sof/intel/icl.c | 4 ++ sound/soc/sof/intel/pci-tng.c | 12 +++-- sound/soc/sof/intel/tgl.c | 4 ++ sound/soc/sof/ipc.c | 6 ++- sound/soc/sof/ops.h | 15 ++++++ sound/soc/sof/pcm.c | 7 ++- sound/soc/sof/sof-audio.h | 11 +++- sound/soc/sof/sof-priv.h | 28 ++++++---- .../sof/{intel/intel-ipc.c => stream-ipc.c} | 50 +++++++++--------- sound/soc/sof/topology.c | 6 ++- 21 files changed, 218 insertions(+), 97 deletions(-) create mode 100644 sound/soc/sof/compress.c rename sound/soc/sof/{intel/intel-ipc.c => stream-ipc.c} (58%) -- 2.27.0 -
Mark Brown authored
Merge series "ASoC: SOF: Improvements for debugging" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, The aim of this series is to clean up, make it easier to interpret and less 'chatty' prints aimed for debugging errors. For example currently the DSP/IPC dump is printed every time we have an IPC timeout and it is posible to lost the first and more indicative dump to find the rootcause. Regards, Peter --- Peter Ujfalusi (18): ASoC: SOF: debug: Swap the dsp_dump and ipc_dump sequence for fw_exception ASoC: SOF: ipc and dsp dump: Add markers for better visibility ASoC: SOF: Print the dbg_dump and ipc_dump once to reduce kernel log noise ASoC: SOF: loader: Print the DSP dump if boot fails ASoC: SOF: intel: atom: No need to do a DSP dump in atom_run() ASoC: SOF: debug/ops: Move the IPC and DSP dump functions out from the header ASoC: SOF: debug: Add SOF_DBG_DUMP_OPTIONAL flag for DSP dumping ASoC: SOF: intel: hda-loader: Use snd_sof_dsp_dbg_dump() for DSP dump ASoC: SOF: Drop SOF_DBG_DUMP_FORCE_ERR_LEVEL and sof_dev_dbg_or_err ASoC: SOF: debug: Print out the fw_state along with the DSP dump ASoC: SOF: ipc: Re-enable dumps after successful IPC tx ASoC: SOF: ops: Force DSP panic dumps to be printed ASoC: SOF: Introduce macro to set the firmware state ASoC: SOF: intel: hda: Drop 'error' prefix from error dump functions ASoC: SOF: core: Clean up snd_sof_get_status() prints ASoC: SOF: loader: Drop SOF_DBG_DUMP_REGS flag when firmware start fails ASoC: SOF: Intel: hda-loader: Drop SOF_DBG_DUMP_REGS flag from dbg_dump calls ASoC: SOF: Intel: hda: Dump registers and stack when SOF_DBG_DUMP_REGS is set Pierre-Louis Bossart (1): ASoC: SOF: core: debug: force all processing on primary core sound/soc/sof/core.c | 24 ++++++------- sound/soc/sof/debug.c | 61 ++++++++++++++++++++++++++++++-- sound/soc/sof/intel/atom.c | 5 +-- sound/soc/sof/intel/hda-loader.c | 11 +++--- sound/soc/sof/intel/hda.c | 16 +++------ sound/soc/sof/ipc.c | 10 ++++-- sound/soc/sof/loader.c | 11 ++++-- sound/soc/sof/ops.c | 3 ++ sound/soc/sof/ops.h | 12 +------ sound/soc/sof/pm.c | 6 ++-- sound/soc/sof/sof-priv.h | 31 ++++++++++------ sound/soc/sof/topology.c | 6 ++++ 12 files changed, 131 insertions(+), 65 deletions(-) -- 2.33.0 -
Mark Brown authored
Hello, this is version 5 of the I2S/TDM driver patchset. A big thanks to everyone who has provided their valuable feedback so far. Changes in v5: driver: - change comment style of the first comment to C++ style - make refcount non-atomic, as it's only ever used inside a spinlock - use newer SND_SOC_DAIFMT_CB* defines - change ternary statements to if/else conditions - make _clk_compensation_put return 1 if clock changed - implement set_bclk_ratio callback - always set half frame sync mode in TDM mode - automatically enable mclk-calibrate mode when the clocks for it are specified in the device tree bindings: - add Reviewed-by: Rob Herring - drop rockchip,frame-width property (done by set_bclk_ratio) - drop rockchip,fsync-half-frame property - drop rockchip,mclk-calibrate property dts: - drop empty codec block from Quartz64 device tree Changes in v4: driver: - factor TDE/RDE enable/disable into their own inlined functions - add an RDE disable in a location where it looks like it was forgotten (rxctrl else), judging by corresponding TDE code - remove parentheses around CLK_PPM_MIN/MAX values - wording + titlecasing in the clock compensation control - use if statement in precious_reg instead - refactor rockchip_i2s_io_multiplex to have the switch statements in a function call to make the function less unwieldy - get rid of IS_ERR checks around clk enable/disable calls where already checked before by the probe - reworded some error message strings - fix potential deadlock in txrxctrl found by Sugar Zhang using spin_lock_irqsave - fix potential deadlock in trcm_mode found by Sugar Zhang using spin_lock_irqsave - use devm_platform_get_and_ioremap_resource in probe - only set DMA things if controller has capture/playback ability. Did not move this into init_dai because I'd then need to pass in the res and probe it earlier in the function, and it's also used elsewhere in the probe function - use _get_optional_exclusive for reset controls, as some controllers only have capture or playback capability bindings: - remove status = "okay" since that's the default - change the path configs to be an enum - rename "foo" to "bus" - make resets optional as controller may lack either playback or capture capability, and therefore also doesn't have a reset. At least one reset is still required, because a controller with no playback and no capture is not very useful Changes in v3: driver: - alphabetically sort includes - check pm_runtime_get_sync return value, act on it - remove unnecessary initialisers in set_fmt - use udelay(15) in retry code: 10 retries * 15 = 150, so at worst we wait the full i2s register access delay - fix some weird returns to return directly - use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP, also put __maybe_unused on the runtime callbacks - use (foo) instead of foo in header macros for precedence reasons - when using mclk-calibrate, also turn off/on those clocks during suspend and resume operations - remove mclk_tx and mclk_rx reenablement code in remove - move hclk enablement further down the probe, and disable it on probe failure - make reset controls mandatory, since the bindings state this too - use _exclusive for getting the reset controls - change reset assert/deassert delays to both be 10 usec (thank you Sugar Zhang!) - properly prepare and enable all mclks in probe, especially before calling clk_get_rate on them - if registering PCM fails, also use the cleanup error path instead of returning directly - bring back playback and capture only but in the way Sugar Zhang suggested it: set those modes depending on dma-names - rework clock enablement in general. Probe now always enables these, instead of relying on the pm resume thing - add myself to MAINTAINERS for this driver dt bindings: - fix a description still mentioning clk-trcm in the schema - document rockchip,io-multiplex, a property that describes the hardware as having multiplexed I2S GPIOs so direction needs to be changed dynamically - document rockchip,mclk-calibrate, which allows specifying different clocks for the two sample rate bases and switch between them as needed - dma-names now doesn't have a set order and items can be absent to indicate that the controller doesn't support this mode - add myself to MAINTAINERS for these bindings Changes in v2: - remove ad-hoc writeq and needless (and broken) optimisation in reset assert/deassert. This wouldn't have worked on Big Endian, and would've been pointless on any other platform, as the overhead for saving one write was comparatively big - fix various checkpatch issues - get rid of leftover clk-trcm in schema - set status = "okay" in example in schema instead of "disabled" - change dma-names so rx is first, adjust device trees as necessary - properly reference uint32-array for rx-route and tx-route instead of uint32 - replace trcm-sync with two boolean properties, adjust DT changes accordingly and also get rid of the header file - get rid of rockchip,no-dmaengine. This was only needed for some downstream driver and shouldn't be in the DT - get rid of rockchip,capture-only/playback-only. Rationale being that I have no way to test whether they're needed, and unconditionally setting channels_min to 0 breaks everything - change hclk description in "clocks" Nicolas Frattaroli (4): ASoC: rockchip: add support for i2s-tdm controller ASoC: dt-bindings: rockchip: add i2s-tdm bindings arm64: dts: rockchip: add i2s1 on rk356x arm64: dts: rockchip: add analog audio on Quartz64 .../bindings/sound/rockchip,i2s-tdm.yaml | 198 ++ MAINTAINERS | 7 + .../boot/dts/rockchip/rk3566-quartz64-a.dts | 31 +- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 26 + sound/soc/rockchip/Kconfig | 11 + sound/soc/rockchip/Makefile | 2 + sound/soc/rockchip/rockchip_i2s_tdm.c | 1848 +++++++++++++++++ sound/soc/rockchip/rockchip_i2s_tdm.h | 398 ++++ 8 files changed, 2520 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml create mode 100644 sound/soc/rockchip/rockchip_i2s_tdm.c create mode 100644 sound/soc/rockchip/rockchip_i2s_tdm.h -- 2.33.0
-
Pierre-Louis Bossart authored
Recent changes in soc-pcm completely broke basic support for mixers on Intel systems: the filters on BE states prevent the connection of a second mixer input while the back-end is already active. Rather than reverting the changes, which would be problematic for Tegra systems, this patch suggests an additional filter which will only apply to Tegra systems. This is a temporary solution which will have to be revisited - additional issues have been reported with DPCM. Fixes: 0c25db3f ('ASoC: soc-pcm: Don't reconnect an already active BE') Suggested-by:
Sameer Pujar <spujar@nvidia.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211004212141.193136-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Derek Fang authored
When the system plays a sound immediately after resuming from S3, it could hear a little pop from headphones. It is due to the HP was unmuted before the completion of jack re-detection finished in parallel. This patch adds a lock to make sure the HP unmute after jack detect handler, and adds a few depop changes. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211007085519.12543-1-derek.fang@realtek.comSigned-off-by:
-
Nicolas Frattaroli authored
This adds the YAML bindings for the Rockchip I2S/TDM audio driver. Signed-off-by:
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211001171531.178775-3-frattaroli.nicolas@gmail.comSigned-off-by:
-
Nicolas Frattaroli authored
This commit adds support for the rockchip i2s-tdm controller, which enables audio output on the following rockchip SoCs: - px30 - rk1808 - rk3308 - rk3566 - rk3568 - rv1126 This is a cleaned up version of the downstream vendor kernel's driver. It can be enabled through the SND_SOC_ROCKCHIP_I2S_TDM configuration option. Signed-off-by:
-
Daniel Baluta authored
This patch prepares the introduction of the compress API with SOF. After each fragment is accepted by the DSP we need to inform the userspace applications that they can send the next fragment. This is done via snd_compr_fragment_elapsed. Similar with the PCM case, in order to avoid sending an IPC before the previous IPC is handled we need to schedule a delayed work to call snd_compr_fragment_elapsed(). See snd_sof_pcm_period_elapsed. To sum up this patch offers the following API to SOF code: * snd_sof_compr_init_elapsed_work * snd_sof_compr_fragment_elapsed Note that implementation for compressed function is in a new file selected via CONFIG_SND_SOC_SOF_COMPRESS invisible config option. This option is automatically selected for platforms that support the compress interface. For now only i.MX8 platforms support this. For symmetry we introduce snd_sof_pcm_init_elapsed_work to setup the work struct for PCM case. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
Bud Liviu-Alexandru <budliviu@gmail.com> Reviewed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
-
Daniel Baluta authored
This makes IMX use the newly introduced generic IPC ops instead of imx specific ones, and removes the old IMX ipc ops, as they are no longer needed. Signed-off-by:
-
Bud Liviu-Alexandru authored
This operations should be generic as there is nothing Intel specific. This works well for NXP i.MX8 stream IPC ops. We start by moving sof/intel/intel-ipc.c into sof/stream-ipc.c and rename the functions to be generic. Notice that we use newly introduced snd_sof_dsp_mailbox_read instead of sof_mailbox_read, to make sure that we are not bound to existing MMIO memory access, and we allow platform to implement their own memory access routines. Signed-off-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
-
Daniel Baluta authored
We need to introduce snd_sof_mailbox_{read/write} in order to provide a generic way for mailbox access. These routines are optional, each platform can implement their own specific routines. So far, all platforms use mmapped I/O thus they can use custom made routines sof_mailbox_read / sof_mailbox_write that use MMIO. Signed-off-by: -
Peter Ujfalusi authored
First thing the pipelines function which have "struct device *dev" as parameter do is: struct snd_sof_dev *sdev = dev_get_drvdata(dev); and in all cases the passed dev is actually coming from sdev->dev. Skip this steps and pass directly the sdev to all pipelines related functions as few of them already does this. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211006111651.10027-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Ranjani Sridharan authored
When removing the topology components, do not power down the primary core. Doing so will result in an IPC timeout when the SOF PCI device runtime suspends. Fixes: 0dcdf842 ("ASoC: SOF: add a "core" parameter to widget loading functions") Signed-off-by:
-
Peter Ujfalusi authored
Instead of checking the fw_state to decide what information should be printed, use the SOF_DBG_DUMP_REGS bit in the flags to dump registers and stack. Signed-off-by:
-
Peter Ujfalusi authored
In cl_dsp_init() we are powering up the DSP, register dump is not valid. In hda_dsp_cl_boot_firmware() we are downloading the firmware to DSP, again the register dump is not a valid concept. Signed-off-by:
-
Peter Ujfalusi authored
snd_sof_dsp_run() failure indicates that the DSP did not even booted up, thus asking for dumping registers at this point is not valid. Signed-off-by:
-
Peter Ujfalusi authored
Clean up the error prints when decoding the status in snd_sof_get_status(): Drop the "error:" prefixes from the prints, Use %# to print hexadecimal numbers, Reword some of the messages to be more precise, For a known error print out the panic code as well, For unknown error print only the panic code without the magic Signed-off-by:
-
Peter Ujfalusi authored
Drop the 'error' prefix printed in hda_dsp_dump_ext_rom_status(), hda_ipc_irq_dump() and hda_ipc_dump() as it gives no value to the information we print. The DSP and IPC dump is marked now, which makes the 'error' prefix more redundant. Signed-off-by:
-
Peter Ujfalusi authored
Add sof_set_fw_state() macro to wrap the sdev->fw_state management to allow actions to be taken when certain state is set or when state is changing. Signed-off-by:
-
Peter Ujfalusi authored
If a DSP panic happens we want to see the dumps. Signed-off-by:
-
Peter Ujfalusi authored
The dumps are silenced after an IPC tx timeout by default. The IPC timeout can indicate severe error (firmware crash) or in some cases it is less devastating and the firmware remains operational, the timeout was due to a scheduling spike or other anomaly. In any case consequent IPC timeouts will not print dumps but if any IPC do succeed than we should re-enable the dumps to print dumps the next time a timeout might happen. Signed-off-by:
-
Peter Ujfalusi authored
The fw state can be an important information along with the DSP dump. Print it out before the dump. Signed-off-by:
-
Peter Ujfalusi authored
The sof_dev_dbg_or_err() is only used by intel/hda.c when dumping dsp debug information. It was used to print the extended rom status in either dev_dbg (during retries) and finally with dev_err, but other lines were printed with dev_err regardless. Since we now only print the dump once, the flag and the macros is no longer needed. Signed-off-by:
-
Peter Ujfalusi authored
Do not call directly the hda_dsp_dump(), use the generic wrapper instead to provide consistent output. Mark the DSP dumps as optional to not spam the kernel log with the exception of the last dump in case the DSP fails to run. Signed-off-by:
-
Peter Ujfalusi authored
The new SOF_DBG_DUMP_OPTIONAL flag can be used to mark a DSP dump that should only be printed when the SOF_DBG_PRINT_ALL_DUMPS sof_core_debug flag is set, otherwise it should be ignored and not printed. Signed-off-by:
-
Peter Ujfalusi authored
To be usable in platform code, move the IPC and DSP dump function to debug.c and export it in a similar way as the snd_sof_handle_fw_exception() Make the snd_sof_ipc_dump() static as it is only used in debug.c Signed-off-by:
-
Peter Ujfalusi authored
The core already prints a dump if the DSP failed to start in snd_sof_run_firmware(), there is no need to print it locally as well. Signed-off-by:
-
Peter Ujfalusi authored
It can be useful to print the DSP dump from the core in case the DSP boot failed. Signed-off-by:
-
Peter Ujfalusi authored
Do not print the dump more than once to keep the kernel log cleaner in case of a firmware failure. When the DSP is rebooted due to suspend or runtime_suspend reset the flags to re-enable the dump prints. Add also a debug flag to print all dumps to get more coverage if needed. Signed-off-by:
-
Peter Ujfalusi authored
Add markers to identify the start and end of the IPC and DSP dumps in the kernel log. Signed-off-by:
-
Peter Ujfalusi authored
snd_sof_dsp_panic() only prints dsp_dump followed by flushing the DMA trace buffer. To retain similar 'sequence' first do an ipc_dump then the dsp_dump and finally flush the trace buffer in case of fw_exception. Signed-off-by:
-
Pierre-Louis Bossart authored
The topology file currently provides information on which pipeline/processing is to be scheduled on which DSP core. To help diagnose potential issues, this patch provides an override of the 'core' tokens to use the primary core (typically core0). Of course this may result in a Core0 activity that exceeds hardware capabilities, so this should only be used when the total processing fits on DSP - possibly using firmware mockup processing and stubs. No new dmesg log was added to avoid adding noise during topology parsing, but the existing logs will show the primary core being used. This is strictly for validation/debug, products should NEVER use this override, the topology is assumed to be the description of the firmware graph. Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
-
- 05 Oct, 2021 8 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.16" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: One quirk for a Dell TigerLake/SoundWire device, and initial support for platforms based on the ES8336 codec (aka ES8316). For full functionality, an update of the codec driver will be needed. Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec ASoC: Intel: add machine driver for SOF+ES8336 ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45 sound/hda/intel-dsp-config.c | 22 +- sound/soc/intel/boards/Kconfig | 14 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/sof_es8336.c | 569 ++++++++++++++++++ sound/soc/intel/boards/sof_sdw.c | 10 + .../intel/common/soc-acpi-intel-bxt-match.c | 6 + .../intel/common/soc-acpi-intel-glk-match.c | 7 +- .../intel/common/soc-acpi-intel-tgl-match.c | 47 ++ 8 files changed, 674 insertions(+), 3 deletions(-) create mode 100644 sound/soc/intel/boards/sof_es8336.c -- 2.25.1 -
Mark Brown authored
Merge series "ASoC: SOF: Intel: add flags to turn on SSP clocks early" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: With the chip shortage, some GeminiLake Intel-based designs were respun and now rely on codecs that need the SSP bit clock turned on in the hw_params stage, not the trigger stage. This patchset mirrors the flags added in the SOF DAI_CONFIG IPC, and sets the flags when this capability is indicated as necessary in the topology files where the SSP configuration is stored. We initially considered a more generic solution with an on-demand SSP clock activation using the common clock framework. This would be a more elegant solution indeed, but it would have required more intrusive changes that would conflict with the SOF multi-client support (in-development), and more backport hassles on product branches. The on-demand activation of clocks is still a desired feature that will be enabled at a later point. Bard Liao (1): ASoC: SOF: dai-intel: add SOF_DAI_INTEL_SSP_CLKCTRL_MCLK/BCLK_ES bits Pierre-Louis Bossart (4): ASoC: SOF: dai: mirror group_id definition added in firmware ASoC: SOF: dai: include new flags for DAI_CONFIG ASoC: SOF: Intel: hda: add new flags for DAI_CONFIG ASoC: SOF: Intel: hda-dai: improve SSP DAI handling for dynamic pipelines include/sound/sof/dai-intel.h | 4 ++ include/sound/sof/dai.h | 10 ++++- sound/soc/sof/intel/hda-dai.c | 82 ++++++++++++++++++++++++++++++++++- sound/soc/sof/intel/hda.c | 6 +++ sound/soc/sof/sof-audio.c | 4 ++ 5 files changed, 103 insertions(+), 3 deletions(-) -- 2.25.1 -
Mark Brown authored
Merge series "ASoC: SOF: topology: minor updates" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Two patches to visualize settings and override dynamic pipelines + one correction for errors on connections. Pierre-Louis Bossart (2): ASoC: SOF: topology: show clks_control value in dynamic debug ASoC: SOF: topology: allow for dynamic pipelines override for debug Ranjani Sridharan (1): ASoC: SOF: topology: return error if sof_connect_dai_widget() fails sound/soc/sof/sof-priv.h | 6 ++++++ sound/soc/sof/topology.c | 24 +++++++++++++++--------- 2 files changed, 21 insertions(+), 9 deletions(-) -- 2.25.1
-
Daniel Baluta authored
This allows specifying an alternate path for SOF firmware or SOF topology. This is particularly useful for i.MX when running Linux vs Android. Signed-off-by:
-
Rikard Falkeborn authored
The struct cz_aif1_ops is only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20211004224514.8783-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Ranjani Sridharan authored
Return the error if sof_connect_dai_widget() fails to abort topology loading and prevent card registration. Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
For debug and community support, it's useful to expose a kernel parameter to prevent the use of dynamic pipelines exposed in a topology file, or conversely to force an existing topology to use dynamic pipelines. Add an override bit and an enable bit which is valid only when the override is set. For products, the intent is that the topology file defines the behavior, these two bits are only intended for diagnosis and performance checks. Signed-off-by:
-
Pierre-Louis Bossart authored
We log most of the SSP configurations except the clks_control. This will be used to enable bclk/mclk early start so it's useful to show the information to the user. Signed-off-by:
-
