- 01 Aug, 2012 40 commits
-
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "This fixes various issues found during July" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches ARM: Fix undefined instruction exception handling ARM: 7480/1: only call smp_send_stop() on SMP ARM: 7478/1: errata: extend workaround for erratum #720789 ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend ARM: 7468/1: ftrace: Trace function entry before updating index ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+ ARM: 7466/1: disable interrupt before spinning endlessly ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
Pull fbdev updates from Florian Tobias Schandinat: - large updates for OMAP - support for LCD3 overlay manager (omap5) - omapdss output cleanup - removal of passive matrix LCD support as there are no drivers for such panels for DSS or DSS2 and nobody complained (cleanup) - large updates for SH Mobile - overlay support - separating MERAM (cache) from framebuffer driver - some updates for Exynos and da8xx-fb - various other small patches * tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits) da8xx-fb: fix compile issue due to missing include fbdev: Make pixel_to_pat() failure mode more friendly da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled fbdev: sh_mobile_lcdc: Fix vertical panning step video: exynos mipi dsi: Fix mipi dsi regulators handling issue video: da8xx-fb: do clock reset of revision 2 LCDC before enabling arm: da850: configure LCDC fifo threshold video: da8xx-fb: configure FIFO threshold to reduce underflow errors video: da8xx-fb: fix flicker due to 1 frame delay in updated frame video: da8xx-fb rev2: fix disabling of palette completion interrupt da8xx-fb: add missing FB_BLANK operations video: exynos_dp: use usleep_range instead of delay video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training fb: epson1355fb: Fix section mismatch video: exynos_dp: fix wrong DPCD address during Link Training video/smscufx: fix line counting in fb_write aty128fb: Fix coding style issues fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation fbdev: sh_mobile_lcdc: Support horizontal panning ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes that have been found recently. Most of the commits are regression fixes in HD-audio and some other random drivers." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: fix clock source validity index ALSA: hda - Fix mute-LED GPIO initialization for IDT codecs ALSA: hda - Add descriptions for missing IDT 92HD83x models ALSA: hda - Fix polarity of mute LED on HP Mini 210 ALSA: es1688 - freeup resources on init failure ALSA: hda - Workaround for silent output on VAIO Z with ALC889 ALSA: hda - Fix WARNING from HDMI/DP parser ALSA: hda - Detach from converter at closing in patch_hdmi.c ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210 ALSA: mpu401: Fix missing initialization of irq field ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecs
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver changes from Jens Axboe: - Making the plugging support for drivers a bit more sane from Neil. This supersedes the plugging change from Shaohua as well. - The usual round of drbd updates. - Using a tail add instead of a head add in the request completion for ndb, making us find the most completed request more quickly. - A few floppy changes, getting rid of a duplicated flag and also running the floppy init async (since it takes forever in boot terms) from Andi. * 'for-3.6/drivers' of git://git.kernel.dk/linux-block: floppy: remove duplicated flag FD_RAW_NEED_DISK blk: pass from_schedule to non-request unplug functions. block: stack unplug blk: centralize non-request unplug handling. md: remove plug_cnt feature of plugging. block/nbd: micro-optimization in nbd request completion drbd: announce FLUSH/FUA capability to upper layers drbd: fix max_bio_size to be unsigned drbd: flush drbd work queue before invalidate/invalidate remote drbd: fix potential access after free drbd: call local-io-error handler early drbd: do not reset rs_pending_cnt too early drbd: reset congestion information before reporting it in /proc/drbd drbd: report congestion if we are waiting for some userland callback drbd: differentiate between normal and forced detach drbd: cleanup, remove two unused global flags floppy: Run floppy initialization asynchronous
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull core block IO bits from Jens Axboe: "The most complicated part if this is the request allocation rework by Tejun, which has been queued up for a long time and has been in for-next ditto as well. There are a few commits from yesterday and today, mostly trivial and obvious fixes. So I'm pretty confident that it is sound. It's also smaller than usual." * 'for-3.6/core' of git://git.kernel.dk/linux-block: block: remove dead func declaration block: add partition resize function to blkpg ioctl block: uninitialized ioc->nr_tasks triggers WARN_ON block: do not artificially constrain max_sectors for stacking drivers blkcg: implement per-blkg request allocation block: prepare for multiple request_lists block: add q->nr_rqs[] and move q->rq.elvpriv to q->nr_rqs_elvpriv blkcg: inline bio_blkcg() and friends block: allocate io_context upfront block: refactor get_request[_wait]() block: drop custom queue draining used by scsi_transport_{iscsi|fc} mempool: add @gfp_mask to mempool_create_node() blkcg: make root blkcg allocation use %GFP_KERNEL blkcg: __blkg_lookup_create() doesn't need radix preload
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md updates from NeilBrown. * 'for-next' of git://neil.brown.name/md: DM RAID: Add support for MD RAID10 md/RAID1: Add missing case for attempting to repair known bad blocks. md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE. md/raid1: don't abort a resync on the first badblock. md: remove duplicated test on ->openers when calling do_md_stop() raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layer md/raid1: prevent merging too large request md/raid1: read balance chooses idlest disk for SSD md/raid1: make sequential read detection per disk based MD RAID10: Export md_raid10_congested MD: Move macros from raid1*.h to raid1*.c MD RAID1: rename mirror_info structure MD RAID10: rename mirror_info structure MD RAID10: Fix compiler warning. raid5: add a per-stripe lock raid5: remove unnecessary bitmap write optimization raid5: lockless access raid5 overrided bi_phys_segments raid5: reduce chance release_stripe() taking device_lock
-
J. Bruce Fields authored
In commit 3b6e2723 ("locks: prevent side-effects of locks_release_private before file_lock is initialized") we removed the last user of lm_release_private without removing the field itself. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
* set_fs(KERNEL_DS) + getname() is probably the weirdest implementation of strdup() I've seen. Especially since they don't to copy it at all... * filp_open() never returns NULL; it's ERR_PTR(-E...) on failure. * file->f_dentry is never going to be NULL, TYVM. * match_strdup() + snprintf() + kfree() is a bloody weird way to spell match_strlcpy(). Pox on cargo-cult programmers... Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Jonathan Brassow authored
Support the MD RAID10 personality through dm-raid.c Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
Pull in pre-requisites for adding raid10 support to dm-raid.
-
Yuanhan Liu authored
__generic_unplug_device() function is removed with commit 7eaceacc, which forgot to remove the declaration at meantime. Here remove it. Signed-off-by:
Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Vivek Goyal authored
Add a new operation code (BLKPG_RESIZE_PARTITION) to the BLKPG ioctl that allows altering the size of an existing partition, even if it is currently in use. This patch converts hd_struct->nr_sects into sequence counter because One might extend a partition while IO is happening to it and update of nr_sects can be non-atomic on 32bit machines with 64bit sector_t. This can lead to issues like reading inconsistent size of a partition. Sequence counter have been used so that readers don't have to take bdev mutex lock as we call sector_in_part() very frequently. Now all the access to hd_struct->nr_sects should happen using sequence counter read/update helper functions part_nr_sects_read/part_nr_sects_write. There is one exception though, set_capacity()/get_capacity(). I think theoritically race should exist there too but this patch does not modify set_capacity()/get_capacity() due to sheer number of call sites and I am afraid that change might break something. I have left that as a TODO item. We can handle it later if need be. This patch does not introduce any new races as such w.r.t set_capacity()/get_capacity(). v2: Add CONFIG_LBDAF test to UP preempt case as suggested by Phillip. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Phillip Susi <psusi@ubuntu.com> Signed-off-by:
-
Olof Johansson authored
Hi, I'm using the old-fashioned 'dump' backup tool, and I noticed that it spews the below warning as of 3.5-rc1 and later (3.4 is fine): [ 10.886893] ------------[ cut here ]------------ [ 10.886904] WARNING: at include/linux/iocontext.h:140 copy_process+0x1488/0x1560() [ 10.886905] Hardware name: Bochs [ 10.886906] Modules linked in: [ 10.886908] Pid: 2430, comm: dump Not tainted 3.5.0-rc7+ #27 [ 10.886908] Call Trace: [ 10.886911] [<ffffffff8107ce8a>] warn_slowpath_common+0x7a/0xb0 [ 10.886912] [<ffffffff8107ced5>] warn_slowpath_null+0x15/0x20 [ 10.886913] [<ffffffff8107c088>] copy_process+0x1488/0x1560 [ 10.886914] [<ffffffff8107c244>] do_fork+0xb4/0x340 [ 10.886918] [<ffffffff8108effa>] ? recalc_sigpending+0x1a/0x50 [ 10.886919] [<ffffffff8108f6b2>] ? __set_task_blocked+0x32/0x80 [ 10.886920] [<ffffffff81091afa>] ? __set_current_blocked+0x3a/0x60 [ 10.886923] [<ffffffff81051db3>] sys_clone+0x23/0x30 [ 10.886925] [<ffffffff8179bd73>] stub_clone+0x13/0x20 [ 10.886927] [<ffffffff8179baa2>] ? system_call_fastpath+0x16/0x1b [ 10.886928] ---[ end trace 32a14af7ee6a590b ]--- Reproducing is easy, I can hit it on a KVM system with a very basic config (x86_64 make defconfig + enable the drivers needed). To hit it, just install dump (on debian/ubuntu, not sure what the package might be called on Fedora), and: dump -o -f /tmp/foo / You'll see the warning in dmesg once it forks off the I/O process and starts dumping filesystem contents. I bisected it down to the following commit: commit f6e8d01b Author: Tejun Heo <tj@kernel.org> Date: Mon Mar 5 13:15:26 2012 -0800 block: add io_context->active_ref Currently ioc->nr_tasks is used to decide two things - whether an ioc is done issuing IOs and whether it's shared by multiple tasks. This patch separate out the first into ioc->active_ref, which is acquired and released using {get|put}_io_context_active() respectively. This will be used to associate bio's with a given task. This patch doesn't introduce any visible behavior change. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
-
Mike Snitzer authored
blk_set_stacking_limits is intended to allow stacking drivers to build up the limits of the stacked device based on the underlying devices' limits. But defaulting 'max_sectors' to BLK_DEF_MAX_SECTORS (1024) doesn't allow the stacking driver to inherit a max_sectors larger than 1024 -- due to blk_stack_limits' use of min_not_zero. It is now clear that this artificial limit is getting in the way so change blk_set_stacking_limits's max_sectors to UINT_MAX (which allows stacking drivers like dm-multipath to inherit 'max_sectors' from the underlying paths). Reported-by:
Vijay Chauhan <vijay.chauhan@netapp.com> Tested-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Daniel Mack authored
uac_clock_source_is_valid() uses the control selector value to access the bmControls bitmap of the clock source unit. This is wrong, as control selector values start from 1, while the bitmap uses all available bits. In other words, "Clock Validity Control" is stored in D3..2, not D5..4 of the clock selector unit's bmControls. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Andreas Koch <andreas@akdesigninc.com> Cc: stable@kernel.org Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name
-
Linus Torvalds authored
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO core from Alex Williamson: "This series includes the VFIO userspace driver interface for the 3.6 kernel merge window. This driver is intended to provide a secure interface for device access using IOMMU protection for applications like assignment of physical devices to virtual machines. Qemu will be the first user of this interface, enabling assignment of PCI devices to Qemu guests. This interface is intended to eventually replace the x86-specific assignment mechanism currently available in KVM. This interface has the advantage of being more secure, by working with IOMMU groups to ensure device isolation and providing it's own filtered resource access mechanism, and also more flexible, in not being x86 or KVM specific (extensions to enable POWER are already working). This driver is originally the work of Tom Lyon, but has since been handed over to me and gone through a complete overhaul thanks to the input from David Gibson, Ben Herrenschmidt, Chris Wright, Joerg Roedel, and others. This driver has been available in linux-next for the last month." Paul Mackerras says: "I would be glad to see it go in since we want to use it with KVM on PowerPC. If possible we'd like the PowerPC bits for it to go in as well." * tag 'vfio-for-v3.6' of git://github.com/awilliam/linux-vfio: vfio: Add PCI device driver vfio: Type1 IOMMU implementation vfio: Add documentation vfio: VFIO core
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull final RDMA changes from Roland Dreier: - Fix IPoIB to stop using unsafe linkage between networking neighbour layer and private path database. - Small fixes for bugs found by Fengguang Wu's automated builds. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Use a private hash table for path lookup in xmit path IB/qib: Fix size of cc_supported_table_entries RDMA/ucma: Convert open-coded equivalent to memdup_user() RDMA/ocrdma: Fix check of GSI CQs RDMA/cma: Use PTR_RET rather than if (IS_ERR(...)) + PTR_ERR
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull second set of media updates from Mauro Carvalho Chehab: - radio API: add support to work with radio frequency bands - new AM/FM radio drivers: radio-shark, radio-shark2 - new Remote Controller USB driver: iguanair - conversion of several drivers to the v4l2 core control framework - new board additions at existing drivers - the remaining (and vast majority of the patches) are due to drivers/DocBook fixes/cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (154 commits) [media] radio-tea5777: use library for 64bits div [media] tlg2300: Declare MODULE_FIRMWARE usage [media] lgs8gxx: Declare MODULE_FIRMWARE usage [media] xc5000: Add MODULE_FIRMWARE statements [media] s2255drv: Add MODULE_FIRMWARE statement [media] dib8000: move dereference after check for NULL [media] Documentation: Update cardlists [media] bttv: add support for Aposonic W-DVR [media] cx25821: Remove bad strcpy to read-only char* [media] pms.c: remove duplicated include [media] smiapp-core.c: remove duplicated include [media] via-camera: pass correct format settings to sensor [media] rtl2832.c: minor cleanup [media] Add support for the IguanaWorks USB IR Transceiver [media] Minor cleanups for MCE USB [media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry [media] Use a named union in struct v4l2_ioctl_info [media] mceusb: Add Twisted Melon USB IDs [media] staging/media/solo6x10: use module_pci_driver macro [media] staging/media/dt3155v4l: use module_pci_driver macro ... Conflicts: Documentation/feature-removal-schedule.txt
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull second wave of NFS client updates from Trond Myklebust: - Patches from Bryan to allow splitting of the NFSv2/v3/v4 code into separate modules. - Fix Oopses in the NFSv4 idmapper - Fix a deadlock whereby rpciod tries to allocate a new socket and ends up recursing into the NFS code due to memory reclaim. - Increase the number of permitted callback connections. * tag 'nfs-for-3.6-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: explicitly reject LOCK_MAND flock() requests nfs: increase number of permitted callback connections. SUNRPC: return negative value in case rpcbind client creation error NFS: Convert v4 into a module NFS: Convert v3 into a module NFS: Convert v2 into a module NFS: Keep module parameters in the generic NFS client NFS: Split out remaining NFS v4 inode functions NFS: Pass super operations and xattr handlers in the nfs_subversion NFS: Only initialize the ACL client in the v3 case NFS: Create a try_mount rpc op NFS: Remove the NFS v4 xdev mount function NFS: Add version registering framework NFS: Fix a number of bugs in the idmapper nfs: skip commit in releasepage if we're freeing memory for fs-related reasons sunrpc: clarify comments on rpc_make_runnable pnfsblock: bail out partial page IO
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking update from David S. Miller: "I think Eric Dumazet and I have dealt with all of the known routing cache removal fallout. Some other minor fixes all around. 1) Fix RCU of cached routes, particular of output routes which require liberation via call_rcu() instead of call_rcu_bh(). From Eric Dumazet. 2) Make sure we purge net device references in cached routes properly. 3) TG3 driver bug fixes from Michael Chan. 4) Fix reported 'expires' value in ipv6 routes, from Li Wei. 5) TUN driver ioctl leaks kernel bytes to userspace, from Mathias Krause." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) ipv4: Properly purge netdev references on uncached routes. ipv4: Cache routes in nexthop exception entries. ipv4: percpu nh_rth_output cache ipv4: Restore old dst_free() behavior. bridge: make port attributes const ipv4: remove rt_cache_rebuild_count net: ipv4: fix RCU races on dst refcounts net: TCP early demux cleanup tun: Fix formatting. net/tun: fix ioctl() based info leaks tg3: Update version to 3.124 tg3: Fix race condition in tg3_get_stats64() tg3: Add New 5719 Read DMA workaround tg3: Fix Read DMA workaround for 5719 A0. tg3: Request APE_LOCK_PHY before PHY access ipv6: fix incorrect route 'expires' value passed to userspace mISDN: Bugfix only few bytes are transfered on a connection seeq: use PTR_RET at init_module of driver bnx2x: remove cast around the kmalloc in bnx2x_prev_mark_path ipv4: clean up put_child ... -
Devendra Naga authored
devm_kzalloc() doesn't need a matching devm_kfree(), the freeing mechanism will trigger when driver unloads. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Devendra Naga authored
At the probe we are assigning ret to return value of PTR_ERR right after the rtc_register_drive()r, as we would have done it in the if (IS_ERR(ptr)) check, since the function fails and goes inside that case Signed-off-by:
-
Mel Gorman authored
If a process creates a large hugetlbfs mapping that is eligible for page table sharing and forks heavily with children some of whom fault and others which destroy the mapping then it is possible for page tables to get corrupted. Some teardowns of the mapping encounter a "bad pmd" and output a message to the kernel log. The final teardown will trigger a BUG_ON in mm/filemap.c. This was reproduced in 3.4 but is known to have existed for a long time and goes back at least as far as 2.6.37. It was probably was introduced in 2.6.20 by [39dde65c: shared page table for hugetlb page]. The messages look like this; [ ..........] Lots of bad pmd messages followed by this [ 127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7). [ 127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7). [ 127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7). [ 127.186778] ------------[ cut here ]------------ [ 127.186781] kernel BUG at mm/filemap.c:134! [ 127.186782] invalid opcode: 0000 [#1] SMP [ 127.186783] CPU 7 [ 127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod [ 127.186801] [ 127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR [ 127.186804] RIP: 0010:[<ffffffff810ed6ce>] [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160 [ 127.186809] RSP: 0000:ffff8804144b5c08 EFLAGS: 00010002 [ 127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0 [ 127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00 [ 127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003 [ 127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8 [ 127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8 [ 127.186815] FS: 00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000 [ 127.186816] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0 [ 127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0) [ 127.186821] Stack: [ 127.186822] ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b [ 127.186824] ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98 [ 127.186825] ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000 [ 127.186827] Call Trace: [ 127.186829] [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80 [ 127.186832] [<ffffffff811bc925>] truncate_hugepages+0x115/0x220 [ 127.186834] [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30 [ 127.186837] [<ffffffff811655c7>] evict+0xa7/0x1b0 [ 127.186839] [<ffffffff811657a3>] iput_final+0xd3/0x1f0 [ 127.186840] [<ffffffff811658f9>] iput+0x39/0x50 [ 127.186842] [<ffffffff81162708>] d_kill+0xf8/0x130 [ 127.186843] [<ffffffff81162812>] dput+0xd2/0x1a0 [ 127.186845] [<ffffffff8114e2d0>] __fput+0x170/0x230 [ 127.186848] [<ffffffff81236e0e>] ? rb_erase+0xce/0x150 [ 127.186849] [<ffffffff8114e3ad>] fput+0x1d/0x30 [ 127.186851] [<ffffffff81117db7>] remove_vma+0x37/0x80 [ 127.186853] [<ffffffff81119182>] do_munmap+0x2d2/0x360 [ 127.186855] [<ffffffff811cc639>] sys_shmdt+0xc9/0x170 [ 127.186857] [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b [ 127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0 [ 127.186868] RIP [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160 [ 127.186870] RSP <ffff8804144b5c08> [ 127.186871] ---[ end trace 7cbac5d1db69f426 ]--- The bug is a race and not always easy to reproduce. To reproduce it I was doing the following on a single socket I7-based machine with 16G of RAM. $ hugeadm --pool-pages-max DEFAULT:13G $ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax $ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall $ for i in `seq 1 9000`; do ./hugetlbfs-test; done On my particular machine, it usually triggers within 10 minutes but enabling debug options can change the timing such that it never hits. Once the bug is triggered, the machine is in trouble and needs to be rebooted. The machine will respond but processes accessing proc like "ps aux" will hang due to the BUG_ON. shutdown will also hang and needs a hard reset or a sysrq-b. The basic problem is a race between page table sharing and teardown. For the most part page table sharing depends on i_mmap_mutex. In some cases, it is also taking the mm->page_table_lock for the PTE updates but with shared page tables, it is the i_mmap_mutex that is more important. Unfortunately it appears to be also insufficient. Consider the following situation Process A Process B --------- --------- hugetlb_fault shmdt LockWrite(mmap_sem) do_munmap unmap_region unmap_vmas unmap_single_vma unmap_hugepage_range Lock(i_mmap_mutex) Lock(mm->page_table_lock) huge_pmd_unshare/unmap tables <--- (1) Unlock(mm->page_table_lock) Unlock(i_mmap_mutex) huge_pte_alloc ... Lock(i_mmap_mutex) ... vma_prio_walk, find svma, spte ... Lock(mm->page_table_lock) ... share spte ... Unlock(mm->page_table_lock) ... Unlock(i_mmap_mutex) ... hugetlb_no_page <--- (2) free_pgtables unlink_file_vma hugetlb_free_pgd_range remove_vma_list In this scenario, it is possible for Process A to share page tables with Process B that is trying to tear them down. The i_mmap_mutex on its own does not prevent Process A walking Process B's page tables. At (1) above, the page tables are not shared yet so it unmaps the PMDs. Process A sets up page table sharing and at (2) faults a new entry. Process B then trips up on it in free_pgtables. This patch fixes the problem by adding a new function __unmap_hugepage_range_final that is only called when the VMA is about to be destroyed. This function clears VM_MAYSHARE during unmap_hugepage_range() under the i_mmap_mutex. This makes the VMA ineligible for sharing and avoids the race. Superficially this looks like it would then be vunerable to truncate and madvise issues but hugetlbfs has its own truncate handlers so does not use unmap_mapping_range() and does not support madvise(DONTNEED). This should be treated as a -stable candidate if it is merged. Test program is as follows. The test case was mostly written by Michal Hocko with a few minor changes to reproduce this bug. ==== CUT HERE ==== static size_t huge_page_size = (2UL << 20); static size_t nr_huge_page_A = 512; static size_t nr_huge_page_B = 5632; unsigned int get_random(unsigned int max) { struct timeval tv; gettimeofday(&tv, NULL); srandom(tv.tv_usec); return random() % max; } static void play(void *addr, size_t size) { unsigned char *start = addr, *end = start + size, *a; start += get_random(size/2); /* we could itterate on huge pages but let's give it more time. */ for (a = start; a < end; a += 4096) *a = 0; } int main(int argc, char **argv) { key_t key = IPC_PRIVATE; size_t sizeA = nr_huge_page_A * huge_page_size; size_t sizeB = nr_huge_page_B * huge_page_size; int shmidA, shmidB; void *addrA = NULL, *addrB = NULL; int nr_children = 300, n = 0; if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) { perror("shmget:"); return 1; } if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) { perror("shmat"); return 1; } if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) { perror("shmget:"); return 1; } if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) { perror("shmat"); return 1; } fork_child: switch(fork()) { case 0: switch (n%3) { case 0: play(addrA, sizeA); break; case 1: play(addrB, sizeB); break; case 2: break; } break; case -1: perror("fork:"); break; default: if (++n < nr_children) goto fork_child; play(addrA, sizeA); break; } shmdt(addrA); shmdt(addrB); do { wait(NULL); } while (--n > 0); shmctl(shmidA, IPC_RMID, NULL); shmctl(shmidB, IPC_RMID, NULL); return 0; } [akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build] Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nathan Zimmer authored
When tmpfs has the interleave memory policy, it always starts allocating for each file from node 0 at offset 0. When there are many small files, the lower nodes fill up disproportionately. This patch spreads out node usage by starting files at nodes other than 0, by using the inode number to bias the starting node for interleave. Signed-off-by:
Nathan Zimmer <nzimmer@sgi.com> Signed-off-by:
-
Minchan Kim authored
pg_data_t is zeroed before reaching free_area_init_core(), so remove the now unnecessary initializations. Signed-off-by:
Minchan Kim <minchan@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Minchan Kim authored
Warn if memory-hotplug/boot code doesn't initialize pg_data_t with zero when it is allocated. Arch code and memory hotplug already initiailize pg_data_t. So this warning should never happen. I select fields randomly near the beginning, middle and end of pg_data_t for checking. This patch isn't for performance but for removing initialization code which is necessary to add whenever we adds new field to pg_data_t or zone. Firstly, Andrew suggested clearing out of pg_data_t in MM core part but Tejun doesn't like it because in the future, some archs can initialize some fields in arch code and pass them into general MM part so blindly clearing it out in mm core part would be very annoying. Signed-off-by:
-
Minchan Kim authored
This patch is preparation for the next patch which removes the zeroing of the pg_data_t in core MM. All archs except MIPS already do this. Signed-off-by:
-
Tim Chen authored
I noticed in a multi-process parallel files reading benchmark I ran on a 8 socket machine, throughput slowed down by a factor of 8 when I ran the benchmark within a cgroup container. I traced the problem to the following code path (see below) when we are trying to reclaim memory from file cache. The res_counter_uncharge function is called on every page that's reclaimed and created heavy lock contention. The patch below allows the reclaimed pages to be uncharged from the resource counter in batch and recovered the regression. Tim 40.67% usemem [kernel.kallsyms] [k] _raw_spin_lock | --- _raw_spin_lock | |--92.61%-- res_counter_uncharge | | | |--100.00%-- __mem_cgroup_uncharge_common | | | | | |--100.00%-- mem_cgroup_uncharge_cache_page | | | __remove_mapping | | | shrink_page_list | | | shrink_inactive_list | | | shrink_mem_cgroup_zone | | | shrink_zone | | | do_try_to_free_pages | | | try_to_free_pages | | | __alloc_pages_nodemask | | | alloc_pages_current Signed-off-by:Tim Chen <tim.c.chen@linux.intel.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Gavin Shan authored
sparse_index_init() uses the index_init_lock spinlock to protect root mem_section assignment. The lock is not necessary anymore because the function is called only during boot (during paging init which is executed only from a single CPU) and from the hotplug code (by add_memory() via arch_add_memory()) which uses mem_hotplug_mutex. The lock was introduced by 28ae55c9 ("sparsemem extreme: hotplug preparation") and sparse_index_init() was used only during boot at that time. Later when the hotplug code (and add_memory()) was introduced there was no synchronization so it was possible to online more sections from the same root probably (though I am not 100% sure about that). The first synchronization has been added by 6ad696d2 ("mm: allow memory hotplug and hibernation in the same kernel") which was later replaced by the mem_hotplug_mutex - 20d6c96b ("mem-hotplug: introduce {un}lock_memory_hotplug()"). Let's remove the lock as it is not needed and it makes the code more confusing. [mhocko@suse.cz: changelog] Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Reviewed-by:
-
Gavin Shan authored
__section_nr() was implemented to retrieve the corresponding memory section number according to its descriptor. It's possible that the specified memory section descriptor doesn't exist in the global array. So add more checking on that and report an error for a wrong case. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Gavin Shan authored
With CONFIG_SPARSEMEM_EXTREME, the two levels of memory section descriptors are allocated from slab or bootmem. When allocating from slab, let slab/bootmem allocator clear the memory chunk. We needn't clear it explicitly. Signed-off-by:
-
Wanpeng Li authored
Add a mem_cgroup_from_css() helper to replace open-coded invokations of container_of(). To clarify the code and to add a little more type safety. [akpm@linux-foundation.org: fix extensive breakage] Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by:
-
Hugh Dickins authored
The may_enter_fs test turns out to be too restrictive: though I saw no problem with it when testing on 3.5-rc6, it very soon OOMed when I tested on 3.5-rc6-mm1. I don't know what the difference there is, perhaps I just slightly changed the way I started off the testing: dd if=/dev/zero of=/mnt/temp bs=1M count=1024; rm -f /mnt/temp; sync repeatedly, in 20M memory.limit_in_bytes cgroup to ext4 on USB stick. ext4 (and gfs2 and xfs) turn out to allocate new pages for writing with AOP_FLAG_NOFS: that seems a little worrying, and it's unclear to me why the transaction needs to be started even before allocating pagecache memory. But it may not be worth worrying about these days: if direct reclaim avoids FS writeback, does __GFP_FS now mean anything? Anyway, we insisted on the may_enter_fs test to avoid hangs with the loop device; but since that also masks off __GFP_IO, we can test for __GFP_IO directly, ignoring may_enter_fs and __GFP_FS. But even so, the test still OOMs sometimes: when originally testing on 3.5-rc6, it OOMed about one time in five or ten; when testing just now on 3.5-rc6-mm1, it OOMed on the first iteration. This residual problem comes from an accumulation of pages under ordinary writeback, not marked PageReclaim, so rightly not causing the memcg check to wait on their writeback: these too can prevent shrink_page_list() from freeing any pages, so many times that memcg reclaim fails and OOMs. Deal with these in the same way as direct reclaim now deals with dirty FS pages: mark them PageReclaim. It is appropriate to rotate these to tail of list when writepage completes, but more importantly, the PageReclaim flag makes memcg reclaim wait on them if encountered again. Increment NR_VMSCAN_IMMEDIATE? That's arguable: I chose not. Setting PageReclaim here may occasionally race with end_page_writeback() clearing it: lru_deactivate_fn() already faced the same race, and correctly concluded that the window is small and the issue non-critical. With these changes, the test runs indefinitely without OOMing on ext4, ext3 and ext2: I'll move on to test with other filesystems later. Trivia: invert conditions for a clearer block without an else, and goto keep_locked to do the unlock_page. Signed-off-by:
-
Michal Hocko authored
The current implementation of dirty pages throttling is not memcg aware which makes it easy to have memcg LRUs full of dirty pages. Without throttling, these LRUs can be scanned faster than the rate of writeback, leading to memcg OOM conditions when the hard limit is small. This patch fixes the problem by throttling the allocating process (possibly a writer) during the hard limit reclaim by waiting on PageReclaim pages. We are waiting only for PageReclaim pages because those are the pages that made one full round over LRU and that means that the writeback is much slower than scanning. The solution is far from being ideal - long term solution is memcg aware dirty throttling - but it is meant to be a band aid until we have a real fix. We are seeing this happening during nightly backups which are placed into containers to prevent from eviction of the real working set. The change affects only memcg reclaim and only when we encounter PageReclaim pages which is a signal that the reclaim doesn't catch up on with the writers so somebody should be throttled. This could be potentially unfair because it could be somebody else from the group who gets throttled on behalf of the writer but as writers need to allocate as well and they allocate in higher rate the probability that only innocent processes would be penalized is not that high. I have tested this change by a simple dd copying /dev/zero to tmpfs or ext3 running under small memcg (1G copy under 5M, 60M, 300M and 2G containers) and dd got killed by OOM killer every time. With the patch I could run the dd with the same size under 5M controller without any OOM. The issue is more visible with slower devices for output. * With the patch ================ * tmpfs size=2G --------------- $ vim cgroup_cache_oom_test.sh $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 30.4049 s, 34.5 MB/s $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 31.4561 s, 33.3 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 20.4618 s, 51.2 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 1.42172 s, 738 MB/s * ext3 ------ $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 27.9547 s, 37.5 MB/s $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 30.3221 s, 34.6 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 24.5764 s, 42.7 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 3.35828 s, 312 MB/s * Without the patch =================== * tmpfs size=2G --------------- $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group ./cgroup_cache_oom_test.sh: line 46: 4668 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 25.4989 s, 41.1 MB/s $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 24.3928 s, 43.0 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 1.49797 s, 700 MB/s * ext3 ------ $ ./cgroup_cache_oom_test.sh 5M using Limit 5M for group ./cgroup_cache_oom_test.sh: line 46: 4689 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 60M using Limit 60M for group ./cgroup_cache_oom_test.sh: line 46: 4692 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count $ ./cgroup_cache_oom_test.sh 300M using Limit 300M for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 20.248 s, 51.8 MB/s $ ./cgroup_cache_oom_test.sh 2G using Limit 2G for group 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 2.85201 s, 368 MB/s [akpm@linux-foundation.org: tweak changelog, reordered the test to optimize for CONFIG_CGROUP_MEM_RES_CTLR=n] [hughd@google.com: fix deadlock with loop driver] Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Ying Han <yinghan@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Xiao Guangrong authored
mmu_notifier_release() is called when the process is exiting. It will delete all the mmu notifiers. But at this time the page belonging to the process is still present in page tables and is present on the LRU list, so this race will happen: CPU 0 CPU 1 mmu_notifier_release: try_to_unmap: hlist_del_init_rcu(&mn->hlist); ptep_clear_flush_notify: mmu nofifler not found free page !!!!!! /* * At the point, the page has been * freed, but it is still mapped in * the secondary MMU. */ mn->ops->release(mn, mm); Then the box is not stable and sometimes we can get this bug: [ 738.075923] BUG: Bad page state in process migrate-perf pfn:03bec [ 738.075931] page:ffffea00000efb00 count:0 mapcount:0 mapping: (null) index:0x8076 [ 738.075936] page flags: 0x20000000000014(referenced|dirty) The same issue is present in mmu_notifier_unregister(). We can call ->release before deleting the notifier to ensure the page has been unmapped from the secondary MMU before it is freed. Signed-off-by:Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johannes Weiner authored
shmem knows for sure that the page is in swap cache when attempting to charge a page, because the cache charge entry function has a check for it. Only anon pages may be removed from swap cache already when trying to charge their swapin. Adjust the comment, though: '4969c119 mm: fix swapin race condition' added a stable PageSwapCache check under the page lock in the do_swap_page() before calling the memory controller, so it's unuse_pte()'s pte_same() that may fail. Signed-off-by:
-
