- 20 Sep, 2013 22 commits
-
-
Guoqing Li authored
We could set rb swap in two modules: DMA controler input part and dsi interface output part. DMA input part is based on pix_fmt to set rbswap, dsi output interface part will set rbswap based on platform dsi_rbswap configuration. This patch include below change and enhancement: 1) The input format which support rbswap is based on RGB format, eg. RGB565 indicates the source data in memory is that Red is [15~11], Green is [10~5], Blue is [4:0], Red is MSB, Blue is LSB, but for the display dma input default setting(rbswap = 0), it only support Blue is [15~11], Green is [10~5], Red is [4:0], Red is LSB, Blue is MSB, so for this format(RGB565), display controller need to set rbswap = 1 and it can support the MSB/LSB correctly. BGR/YUV format will not set it in mmp display driver. 2) The dsi output part of rbswap is depend on dsi_rbswap which is defined in specific platfrom. For output dsi interface, it has this feature to do rbswap again if it needs specifc byte sequence of RGB byte for DSI panel. eg. If display content is set RGB565 in memory and DMA input part set rbswap in driver to support Red as MSB , Blue LSB, but dsi panel only support Red as LSB, Blue as MSB, then it can use this feature. If there is no this requirement of panel, this dsi output part is not needed. Signed-off-by:
Guoqing Li <ligq@marvell.com> Signed-off-by:
Jett.Zhou <jtzhou@marvell.com> Signed-off-by:
Zhou Zhu <zzhu3@marvell.com> Reviewed-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Also, unnecessary casting from return value that is a void pointer is removed. Signed-off-by:
-
Thierry Reding authored
The power management code is only used on X86 and PowerMac. To prevent the compiler from warning about unused code, only build when PM and one of X86 or PowerMac is selected. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Sachin Kamat authored
module_platform_driver removes some boilerplate code and makes it simple. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by:
-
- 19 Sep, 2013 18 commits
-
-
Peter Huewe authored
Removing some boilerplate by using module_i2c_driver instead of calling register and unregister in the otherwise empty init/exit functions. Also removed a useless comment as suggested by Jean Delvare. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
From 9e2c37ee1d5c2145fac113c483c9e6dd408f10fe Mon Sep 17 00:00:00 2001 From: Jingoo Han <jg1.han@samsung.com> Date: Thu, 12 Sep 2013 15:11:07 +0900 Subject: [PATCH 14/21] video: pm2fb: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
From fbb1885952efb15a46d03aac050c38fc9179594e Mon Sep 17 00:00:00 2001 From: Jingoo Han <jg1.han@samsung.com> Date: Thu, 12 Sep 2013 14:42:45 +0900 Subject: [PATCH 06/21] video: gx1fb: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
