- 08 Aug, 2014 7 commits
-
-
Vladimir Davydov authored
It's not used anywhere today, so let's remove it. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vladimir Davydov authored
Add forward declarations for struct pglist_data, mem_cgroup. Remove __init, __meminit from function prototypes and inline functions. Remove redundant inclusion of bit_spinlock.h. Signed-off-by:
-
Johannes Weiner authored
Pages are now uncharged at release time, and all sources of batched uncharges operate on lists of pages. Directly use those lists, and get rid of the per-task batching state. This also batches statistics accounting, in addition to the res counter charges, to reduce IRQ-disabling and re-enabling. Signed-off-by:
-
Johannes Weiner authored
The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by:
Jet Chen <jet.chen@intel.com> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Johannes Weiner authored
These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by:Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Oleg Nesterov authored
Aleksei hit the soft lockup during reading /proc/PID/smaps. David investigated the problem and suggested the right fix. while_each_thread() is racy and should die, this patch updates vm_is_stack(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Aleksei Besogonov <alex.besogonov@gmail.com> Tested-by:
David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joonsoo Kim authored
This reverts commit a6406168 ("slab: remove BAD_ALIEN_MAGIC"). commit a6406168 ("slab: remove BAD_ALIEN_MAGIC") assumes that the system with !CONFIG_NUMA has only one memory node. But, it turns out to be false by the report from Geert. His system, m68k, has many memory nodes and is configured in !CONFIG_NUMA. So it couldn't boot with above change. Here goes his failure report. With latest mainline, I'm getting a crash during bootup on m68k/ARAnyM: enable_cpucache failed for radix_tree_node, error 12. kernel BUG at /scratch/geert/linux/linux-m68k/mm/slab.c:1522! *** TRAP #7 *** FORMAT=0 Current process id is 0 BAD KERNEL TRAP: 00000000 Modules linked in: PC: [<0039c92c>] kmem_cache_init_late+0x70/0x8c SR: 2200 SP: 00345f90 a2: 0034c2e8 d0: 0000003d d1: 00000000 d2: 00000000 d3: 003ac942 d4: 00000000 d5: 00000000 a0: 0034f686 a1: 0034f682 Process swapper (pid: 0, task=0034c2e8) Frame format=0 Stack from 00345fc4: 002f69ef 002ff7e5 000005f2 000360fa 0017d806 003921d4 00000000 00000000 00000000 00000000 00000000 00000000 003ac942 00000000 003912d6 Call Trace: [<000360fa>] parse_args+0x0/0x2ca [<0017d806>] strlen+0x0/0x1a [<003921d4>] start_kernel+0x23c/0x428 [<003912d6>] _sinittext+0x2d6/0x95e Code: f7e5 4879 002f 69ef 61ff ffca 462a 4e47 <4879> 0035 4b1c 61ff fff0 0cc4 7005 23c0 0037 fd20 588f 265f 285f 4e75 48e7 301c Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! Although there is a alternative way to fix this issue such as disabling use of alien cache on !CONFIG_NUMA, but, reverting issued commit is better to me in this time. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
- 07 Aug, 2014 33 commits
-
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze updates from Michal Simek: - add new syscall and fix comment - fix udelay implementation - fix libgcc for modules * tag 'microblaze-3.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Change libgcc-style functions from lib-y to obj-y microblaze: Wire-up renameat2 syscall microblaze: Add syscall number comment microblaze: delay.h fix udelay and ndelay for 8 bit args
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds authored
Pull avr32 fix from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: fix error return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
-
Julia Lawall authored
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no>
-
Linus Torvalds authored
Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "This fixes the most immediate fallout from yesterday's networking merge: 1) sock_tx_timestamp() must not clear the passed in tx_flags, but rather add to them. Fix from Eric Dumazet. 2) The hyperv driver sendbuf region increase needs to be decreased slightly to handle older backends. From KY Srinivasan. 3) Fix RCU lockdep splats in netlink diag after recent hashing changes, from Thomas Graf. 4) The new IPV6_FLOWLABEL was given a socket option number that overlapped with an existing IP6 tables one, breaking ip6_tables. Fixed by Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netlink: hold nl_sock_hash_lock during diag dump tcp: md5: check md5 signature without socket lock net: fix USB network driver config option. net: reallocate new socket option number for IPV6_AUTOFLOWLABEL vmxnet3: fix decimal printf format specifiers prefixed with 0x net-timestamp: cumulative tcp timestamping fixes hyperv: Adjust the size of sendbuf region to support ws2008r2 cxgb4: Fix for SR-IOV VF initialization net-timestamp: sock_tx_timestamp() fix -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: "Some highlights: - hid-sony improvements of Sixaxis device support by Antonio Ospite - hid-hyperv driven devices can now be used as wakeup source, by Dexuan Cui - hid-lenovo driver is now more generic and supports more devices, by Jamie Lentin - hid-huion now supports wider range of tablets, by Nikolai Kondrashov - other various unsorted fixes and device ID additions" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: hyperv: register as a wakeup source HID: sony: Default initialize all elements of the LED max_brightness array to 1 HID: huion: Fix sparse warnings HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed HID: ignore jabra gn9350e HID: cp2112: add I2C mode HID: use multi input quirk for 22b9:2968 HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices HID: rmi: check that report ids exist in the report_id_hash before accessing their size HID: lenovo: Add support for Compact (BT|USB) keyboard HID: lenovo: Don't call function in condition, show error codes HID: lenovo: Prepare support for adding other devices HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo HID: huion: Handle tablets with UC-Logic vendor ID HID: huion: Switch to generating report descriptor HID: huion: Don't ignore other interfaces HID: huion: Use "tablet" instead of specific model HID: add quirk for 0x04d9:0xa096 device HID: i2c-hid: call the hid driver's suspend and resume callbacks HID: rmi: change logging level of log messages related to unexpected reports ... -
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - remove unnecessary checks after platform_get_resource() - fix watchdog api documentation typo's - imx2_wdt: adds big endianness support - move restart code to the sunxi watchdog driver * git://www.linux-watchdog.org/linux-watchdog: wdt: sunxi: Move restart code to the watchdog driver Documentation: fix two typos in watchdog-api.txt watchdog: imx2_wdt: adds big endianness support. watchdog: shwdt: Remove the unnecessary check of resource after platform_get_resource() watchdog: lantiq_wdt: Remove the un-necessary check of resource after platform_get_resource() watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits) scsi: do not issue SCSI RSOC command to Promise Vtrak E610f vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Fix invalid return when request_irq() failed lpfc: Remove superfluous call to pci_disable_msix() isci: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Cleanup bfad_setup_intr() function bfa: Do not call pci_enable_msix() after it failed once fnic: Use pci_enable_msix_exact() instead of pci_enable_msix() scsi: use short driver name for per-driver cmd slab caches scsi_debug: support scsi-mq, queues and locks Drivers: add blist flags scsi: ufs: fix endianness sparse warnings scsi: ufs: make undeclared functions static bnx2i: Update driver version to 2.7.10.1 pm8001: fix a memory leak in nvmd_resp pm8001: fix update_flash pm8001: fix a memory leak in flash_update pm8001: Cleaning up uninitialized variables pm8001: Fix to remove null pointer checks that could never happen ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "There've been many updates in ASoC side at this time, especially the framework enhancement for multiple CODECs on a single DAI and more componentization works. The only major change in ALSA core is the addition of timestamp type in sw_params field. This should behave in backward compatible way. Other than that, there are lots of small changes and new drivers in wide range, including a large code cut in HD-audio driver for deprecated static quirks. Some highlights are below: ALSA Core: - Add the new timestamp type field to sw_params to choose MONOTONIC_RAW type HD-audio: - Continued conversion to standard printk macros, generic code cleanups - Removal of obsoleted static quirk codes for Conexant and C-Media codecs - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED, Gigabyte BXBT-2807 mobo - Intel Braswell support ASoC: - Support for multiple CODECs attached to a single DAI, enabling systems with for example multiple DAC/speaker drivers on a single link, contributed by Benoit Cousson based on work from Misael Lopez Cruz - Support for byte controls larger than 256 bytes based on the use of TLVs contributed by Omair Mohammed Abdullah - More componentisation work from Lars-Peter Clausen - The remainder of the conversions of CODEC drivers to params_width() by Mark Brown - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments TAS2552 - Lots of updates and fixes, especially to the DaVinci, Intel, Freescale, Realtek, and rcar drivers" * tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits) ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.* ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata sound/oss/opl3: Remove typedef opl_devinfo ALSA: fireworks: fix specifiers in format strings for propper output ASoC: imx-audmux: Use uintptr_t for port numbers ASoC: davinci: Enable menuconfig entry for McASP ASoC: fsl_asrc: Don't access members of config before checking it ASoC: fsl_sarc_dma: Check pair before using it ASoC: adau1977: Fix truncation warning on 64 bit architectures ALSA: virtuoso: add Xonar Essence STX II support ALSA: riptide: fix %d confusingly prefixed with 0x in format strings ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings ALSA: hda - add codec ID for Braswell display audio codec ALSA: hda - add PCI IDs for Intel Braswell ALSA: usb-audio: Adjust Gamecom 780 volume level ALSA: usb-audio: improve dmesg source grepability ASoC: rt5670: Fix duplicate const warnings ASoC: rt5670: Staticise non-exported symbols ASoC: Intel: update stream only on stream IPC msgs ... -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI changes from Sebastian Reichel: "Misc fixes in SSI related drivers" * tag 'hsi-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: omap_ssi: Fix return value check in ssi_debug_add_ctrl() HSI: omap_ssi_port: Fix return value check in ssi_debug_add_port() HSI: ssi_protocol: Fix sparse non static symbol warning drivers/hsi/controllers/omap_ssi{,_port}.c: fix failure checks
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull power supply changes from Sebastian Reichel: - Added iPaq h3xxx battery driver - Added Broadcom STB reset driver - DT support for rx51-battery - misc. fixes * tag 'for-v3.17' of git://git.infradead.org/battery-2.6: ipaq_micro_battery: fix sparse non static symbol warning power: add driver for battery reading on iPaq h3xxx power: twl4030_charger: detect battery presence prior to enabling charger power: reset: Add reboot driver for brcmstb power_supply: Fix sparse non static symbol warning power_supply: Add inlmt,iterm, min/max temp props charger: tps65090: Allow charger module to be used when no irq power/reset: Fix GPL v2 license string typo power: poweroff: gpio: convert to use descriptors bq27000: report missing device better. bq27x00_battery: Introduce the use of the managed version of kzalloc Documentation: DT: Document rx51-battery binding rx51_battery: convert to iio consumer bq2415x_charger: Fix Atomic Sleep Bug
-
Gavin Shan authored
The function is used by VFIO driver, which might be built as a dynamic module. So it should be exported. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Thomas Graf authored
Although RCU protection would be possible during diag dump, doing so allows for concurrent table mutations which can render the in-table offset between individual Netlink messages invalid and thus cause legitimate sockets to be skipped in the dump. Since the diag dump is relatively low volume and consistency is more important than performance, the table mutex is held during dump. Reported-by:
Andrey Wagin <avagin@gmail.com> Signed-off-by:
Thomas Graf <tgraf@suug.ch> Fixes: e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Using uninitialized_var reports a false positive for "Missing blank line after declarations". Fix it by adding uninitialized_var to the $declaration_macros exceptions list. Move the macro list after $Type is declared. Add optional prefixes to DECLARE_<FOO> and DEFINE_<BAR> macro declarations to allow forms like: MLX4_DECLARE_DOORBELL_LOCK Signed-off-by:
Joe Perches <joe@perches.com> Reported-by:
Dotan Barak <dotanb@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
Checkpatch already complains when people break up quoted strings but it's still pretty common. One mistake that people often make is they leave out the space character between the two strings. This check adds around 450 new warnings and has a low rate of false positives. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Whitcroft <apw@canonical.com> Acked-by:
-
Joe Perches authored
Commit 89da401f6cff ("checkpatch: improve "no space after cast" test") in -next improved the cast test for non pointer types, but also introduced false positives for some types of static inlines. Add a test for an open brace to the exclusions to avoid these false positives. Signed-off-by:Hartley Sweeten <HartleyS@visionengravers.com> Signed-off-by:
-
Joe Perches authored
Using --file mode can give false positives with MISSING_BREAK fall-through warnings on simple but long multiple consecutive case statements. Look for all lines before a case statement for a switch or a statement when using --file mode. Fix a misspelling of preceded while there. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
-
Joe Perches authored
c90 section "6.7.2 Type Specifiers" says: "type specifiers may occur in any order" That means that: short int is the same as int short unsigned short int is the same as int unsigned short etc... checkpatch currently parses only a subset of these allowed types. For instance: "unsigned short" and "signed short" are found by checkpatch as a specific type, but none of the or "int short" or "int signed short" variants are found. Add another table for the "kernel style misordered" variants. Add this misordered table to the findable types. Warn when the misordered style is used. This improves the "Missing a blank line after declarations" test as it depends on the correct parsing of the $Declare variable which looks for "$Type $Ident;" (ie: declarations like "int foo;"). Signed-off-by:Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Current generic types are unsigned or unspecified. Add signed to the types. Reorder the types to find the longest match first. Signed-off-by:
-
Joe Perches authored
short int is one of the 6.7.2 c90 types. Find it appropriately. This fixes a defect in checkpatch where it suggests that a line break after declaration is required using an input like: int foo; short int bar; Without this change, it warns on the short int line. Signed-off-by:
-
Joe Perches authored
All the various for_each loop macros were not tested for trailing brace on the following lines and for bad indentation. Add them. Signed-off-by:
Greg KH <gregkh@linuxfoundation.org> Cc: Andy Whitcroft <apw@canonical.com Signed-off-by:
-
Joe Perches authored
Add --fix corrections for ELSE_AFTER_BRACE and WHILE_AFTER_BRACE misuses. if (x) { ... } else { ... } is corrected to if (x) { ... } else { ... } and do { ... } while (x); is corrected to do { ... } while (x); Signed-off-by: -
Joe Perches authored
Style misuses of these types are corrected: typedef struct foo { int bar; }; int foo(int bar) { return bar+1; } int foo(int bar) { return bar+1; } Signed-off-by: -
Joe Perches authored
I copied the which subroutine from get_maintainer.pl. Unfortunately, get_maintainer uses a 4 space indentation so use the proper tab indentation instead. Signed-off-by:
-
Joe Perches authored
Neaten the uses of patch/file line insertions or deletions. Hide the mechanism used. Signed-off-by:
-
Joe Perches authored
This can be valuable to insert or delete blank lines as well as fix misplaced brace or else uses. Store indexes of lines to be added/deleted and the new lines. When creating the --fix file, insert or delete the appropriate lines and update the patch range information. Signed-off-by:
-
Joe Perches authored
Make the fix code a bit easier to read. This should also start to allow an easier mechanism to insert/delete lines eventually too. Signed-off-by:
-
Joe Perches authored
Using break; after a goto or return is unnecessary so emit a warning when the break is at the same indent level. So this emits a warning on: switch (foo) { case 1: goto err; break; } but not on: switch (foo) { case 1: if (bar()) goto err; break; } Signed-off-by:
-
