Layerscape MACs support 25Gbps network speed with dpmac "CAUI" mode.
Add the mappings between DPMAC_ETH_IF_* and HY_INTERFACE_MODE_*, as well
as the 25000 mac capability.

Tested on SolidRun LX2162a Clearfog, serdes 1 protocol 18.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ieee802154-for-net-2023-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan

Stefan Schmidt says:

====================
An update from ieee802154 for your *net* tree:

Two small fixes and MAINTAINERS update this time.

Azeem Shaikh ensured consistent use of strscpy through the tree and fixed
the usage in our trace.h.

Chen Aotian fixed a potential memory leak in the hwsim simulator for
ieee802154.

Miquel Raynal updated the MAINATINERS file with the new team git tree
locations and patchwork URLs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2023-06-16

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>

If the core is left to remove the LEDs via devm_, it is performed too
late, after the PHY driver is removed from the PHY. This results in
dereferencing a NULL pointer when the LED core tries to turn the LED
off before destroying the LED.

Manually unregister the LEDs at a safe point in phy_remove.

Cc: stable@vger.kernel.org
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 01e5b728 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running workloads heavy unbalanced towards TX (high TX, low RX
traffic), sfc driver can retain the CPU during too long times. Although
in many cases this is not enough to be visible, it can affect
performance and system responsiveness.

A way to reproduce it is to use a debug kernel and run some parallel
netperf TX tests. In some systems, this will lead to this message being
logged:
  kernel:watchdog: BUG: soft lockup - CPU#12 stuck for 22s!

The reason is that sfc driver doesn't account any NAPI budget for the TX
completion events work. With high-TX/low-RX traffic, this makes that the
CPU is held for long time for NAPI poll.

Documentations says "drivers can process completions for any number of Tx
packets but should only process up to budget number of Rx packets".
However, many drivers do limit the amount of TX completions that they
process in a single NAPI poll.

In the same way, this patch adds a limit for the TX work in sfc. With
the patch applied, the watchdog warning never appears.

Tested with netperf in different combinations: single process / parallel
processes, TCP / UDP and different sizes of UDP messages. Repeated the
tests before and after the patch, without any noticeable difference in
network or CPU performance.

Test hardware:
Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (4 cores, 2 threads/core)
Solarflare Communications XtremeScale X2522-25G Network Adapter

Fixes: 5227eccc ("sfc: remove tx and MCDI handling from NAPI budget consideration")
Fixes: d19a5372 ("sfc_ef100: TX path for EF100 NICs")
Reported-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230615084929.10506-1-ihuguet@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since the return values
from the helper macros are ignored by the callers.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230613003326.3538391-1-azeemshaikh38@gmail.comSigned-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

ASO query can be scheduled in atomic context as such it can't use usleep.
Use udelay as recommended in Documentation/timers/timers-howto.rst.

Fixes: 76e463f6 ("net/mlx5e: Overcome slow response for first IPsec ASO WQE")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

XFRM state which is changed to be XFRM_STATE_EXPIRED doesn't really
need to hold lock while modifying flow steering rules to drop traffic.

That state can be deleted only and as such mlx5e_ipsec_handle_tx_limit()
work will be canceled anyway and won't run in parallel.

Fixes: b2f7b01d ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Previously during mlx5e_ipsec_handle_event the driver tried to execute
an operation that could sleep, while holding a spinlock, which caused
the kernel panic mentioned below.

Move the function call that can sleep outside of the spinlock context.

 Call Trace:
 <TASK>
 dump_stack_lvl+0x49/0x6c
 __schedule_bug.cold+0x42/0x4e
 schedule_debug.constprop.0+0xe0/0x118
 __schedule+0x59/0x58a
 ? __mod_timer+0x2a1/0x3ef
 schedule+0x5e/0xd4
 schedule_timeout+0x99/0x164
 ? __pfx_process_timeout+0x10/0x10
 __wait_for_common+0x90/0x1da
 ? __pfx_schedule_timeout+0x10/0x10
 wait_func+0x34/0x142 [mlx5_core]
 mlx5_cmd_invoke+0x1f3/0x313 [mlx5_core]
 cmd_exec+0x1fe/0x325 [mlx5_core]
 mlx5_cmd_do+0x22/0x50 [mlx5_core]
 mlx5_cmd_exec+0x1c/0x40 [mlx5_core]
 mlx5_modify_ipsec_obj+0xb2/0x17f [mlx5_core]
 mlx5e_ipsec_update_esn_state+0x69/0xf0 [mlx5_core]
 ? wake_affine+0x62/0x1f8
 mlx5e_ipsec_handle_event+0xb1/0xc0 [mlx5_core]
 process_one_work+0x1e2/0x3e6
 ? __pfx_worker_thread+0x10/0x10
 worker_thread+0x54/0x3ad
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xda/0x101
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x29/0x37
 </TASK>
 BUG: workqueue leaked lock or atomic: kworker/u256:4/0x7fffffff/189754#012     last function: mlx5e_ipsec_handle_event [mlx5_core]
 CPU: 66 PID: 189754 Comm: kworker/u256:4 Kdump: loaded Tainted: G        W          6.2.0-2596.20230309201517_5.el8uek.rc1.x86_64 #2
 Hardware name: Oracle Corporation ORACLE SERVER X9-2/ASMMBX9-2, BIOS 61070300 08/17/2022
 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_event [mlx5_core]
 Call Trace:
 <TASK>
 dump_stack_lvl+0x49/0x6c
 process_one_work.cold+0x2b/0x3c
 ? __pfx_worker_thread+0x10/0x10
 worker_thread+0x54/0x3ad
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xda/0x101
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x29/0x37
 </TASK>
 BUG: scheduling while atomic: kworker/u256:4/189754/0x00000000

Fixes: cee137a6 ("net/mlx5e: Handle ESN update events")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

XFRM core provides two callbacks to release resources, one is .xdo_dev_policy_delete()
and another is .xdo_dev_policy_free(). This separation allows delayed release so
"ip xfrm policy free" commands won't starve. Unfortunately, mlx5 command interface
can't run in .xdo_dev_policy_free() callbacks as the latter runs in ATOMIC context.

 BUG: scheduling while atomic: swapper/7/0/0x00000100
 Modules linked in: act_mirred act_tunnel_key cls_flower sch_ingress vxlan mlx5_vdpa vringh vhost_iotlb vdpa rpcrdma rdma_ucm ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse
 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.3.0+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <IRQ>
  dump_stack_lvl+0x33/0x50
  __schedule_bug+0x4e/0x60
  __schedule+0x5d5/0x780
  ? __mod_timer+0x286/0x3d0
  schedule+0x50/0x90
  schedule_timeout+0x7c/0xf0
  ? __bpf_trace_tick_stop+0x10/0x10
  __wait_for_common+0x88/0x190
  ? usleep_range_state+0x90/0x90
  cmd_exec+0x42e/0xb40 [mlx5_core]
  mlx5_cmd_do+0x1e/0x40 [mlx5_core]
  mlx5_cmd_exec+0x18/0x30 [mlx5_core]
  mlx5_cmd_delete_fte+0xa8/0xd0 [mlx5_core]
  del_hw_fte+0x60/0x120 [mlx5_core]
  mlx5_del_flow_rules+0xec/0x270 [mlx5_core]
  ? default_send_IPI_single_phys+0x26/0x30
  mlx5e_accel_ipsec_fs_del_pol+0x1a/0x60 [mlx5_core]
  mlx5e_xfrm_free_policy+0x15/0x20 [mlx5_core]
  xfrm_policy_destroy+0x5a/0xb0
  xfrm4_dst_destroy+0x7b/0x100
  dst_destroy+0x37/0x120
  rcu_core+0x2d6/0x540
  __do_softirq+0xcd/0x273
  irq_exit_rcu+0x82/0xb0
  sysvec_apic_timer_interrupt+0x72/0x90
  </IRQ>
  <TASK>
  asm_sysvec_apic_timer_interrupt+0x16/0x20
 RIP: 0010:default_idle+0x13/0x20
 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 7a 4d ee 00 85 c0 7e 07 0f 00 2d 2f 98 2e 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 40 b4 02 00
 RSP: 0018:ffff888100843ee0 EFLAGS: 00000242
 RAX: 0000000000000001 RBX: ffff888100812b00 RCX: 4000000000000000
 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000002d2ec
 RBP: 0000000000000007 R08: 00000021daeded59 R09: 0000000000000001
 R10: 0000000000000000 R11: 000000000000000f R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  default_idle_call+0x30/0xb0
  do_idle+0x1c1/0x1d0
  cpu_startup_entry+0x19/0x20
  start_secondary+0xfe/0x120
  secondary_startup_64_no_verify+0xf3/0xfb
  </TASK>
 bad: scheduling from the idle thread!

Fixes: a5b8ca94 ("net/mlx5e: Add XFRM policy offload logic")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.

On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.

To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.

[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.4.0-rc4+ #10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282
[ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000
[ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023
[ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260
[ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000
[ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600
[ 4497.504804] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 4497.505302] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0
[ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158]  <TASK>
[ 4497.507299]  ? free_irq+0x295/0x340
[ 4497.507522]  ? __warn+0x7c/0x130
[ 4497.507740]  ? free_irq+0x295/0x340
[ 4497.507963]  ? report_bug+0x171/0x1a0
[ 4497.508197]  ? handle_bug+0x3c/0x70
[ 4497.508417]  ? exc_invalid_op+0x17/0x70
[ 4497.508662]  ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926]  ? free_irq+0x295/0x340
[ 4497.509146]  mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421]  mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714]  mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984]  shutdown+0x7b/0x100
[ 4497.510184]  pci_device_shutdown+0x30/0x60
[ 4497.510440]  device_shutdown+0x14d/0x240
[ 4497.510698]  kernel_power_off+0x30/0x70
[ 4497.510938]  process_one_work+0x1e6/0x3e0
[ 4497.511183]  worker_thread+0x49/0x3b0
[ 4497.511407]  ? __pfx_worker_thread+0x10/0x10
[ 4497.511679]  kthread+0xe0/0x110
[ 4497.511879]  ? __pfx_kthread+0x10/0x10
[ 4497.512114]  ret_from_fork+0x29/0x50
[ 4497.512342]  </TASK>

Fixes: 9c2d0801 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>

When TUNNEL_L3_TO_L2 decap action was created, a pointer to a local
variable was passed as its HW action data, resulting in attempt to
free invalid address:

  BUG: KASAN: invalid-free in mlx5dr_action_destroy+0x318/0x410 [mlx5_core]

Fixes: 4781df92 ("net/mlx5: DR, Move STEv0 modify header logic")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In some cases, steering might need to use SW-created action in
FW table, which results in wrong packet reformat being used:

  mlx5_core 0000:81:00.1: mlx5_cmd_check:756:(pid 1154):
      SET_FLOW_TABLE_ENTRY(0×936) op_mod(0×0) failed,
      status bad resource(0×5), syndrome (0xf2ff71)

This patch adds support for usage of SW-created packet reformat (encap)
actions in FW tables, and adds clear error flow for attempt to use
SW-created modify header on FW tables.

Fixes: 6a48faee ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit removes special handling of CT action. But it
removes too much. Pre ct/ct_nat tables and some other resources
are not destroyed due to the cited commit.

Fix it by adding it back.

Fixes: 08fe94ec ("net/mlx5e: TC, Remove special handling of CT action")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commits add hardware miss support to tc action. But if
the rules can't be offloaded, the pointers are null and system
will panic when accessing them.

Fix it by checking null pointer.

Fixes: 08fe94ec ("net/mlx5e: TC, Remove special handling of CT action")
Fixes: 67027828 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When a PCI device has just one msix vector available, we want to share
this vector between async and completion events. Current code fails to
do that assuming it will always have at least one dedicated vector for
completion events. Fix this by detecting when the pool contains just a
single vector.

Fixes: 3354822c ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit missed setting napi_id on XSK RQs, it only affected
regular RQs. Add the missing part to support socket busy polling on XSK
RQs.

Fixes: a2740f52 ("net/mlx5e: xsk: Set napi_id to support busy polling")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commits missed passing frag_size to __xdp_rxq_info_reg, which
is required by bpf_xdp_adjust_tail to support growing the tail pointer
in fragmented packets. Pass the missing parameter when the current RQ
mode allows XDP multi buffer.

Fixes: ea5d49bd ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Fixes: 9cb9482e ("net/mlx5e: Use fragments of the same size in non-linear legacy RQ with XDP")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Magali Lemes says:

====================
Check if FIPS mode is enabled when running selftests

Some test cases from net/tls, net/fcnal-test and net/vrf-xfrm-tests
that rely on cryptographic functions to work and use non-compliant FIPS
algorithms fail in FIPS mode.

In order to allow these tests to pass in a wider set of kernels,
 - for net/tls, skip the test variants that use the ChaCha20-Poly1305
and SM4 algorithms, when FIPS mode is enabled;
 - for net/fcnal-test, skip the MD5 tests, when FIPS mode is enabled;
 - for net/vrf-xfrm-tests, replace the algorithms that are not
FIPS-compliant with compliant ones.

v1: https://lore.kernel.org/netdev/20230607174302.19542-1-magali.lemes@canonical.com/
v2: https://lore.kernel.org/netdev/20230609164324.497813-1-magali.lemes@canonical.com/
v3: https://lore.kernel.org/netdev/20230612125107.73795-1-magali.lemes@canonical.com/
====================

Link: https://lore.kernel.org/r/20230613123222.631897-1-magali.lemes@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.

Fixes: f0bee1eb ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.

Fixes: 3f251d74 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.

Fixes: 4f336e88 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Before executing each test from a fixture, FIXTURE_SETUP is run once.
When SKIP is used in FIXTURE_SETUP, the setup function returns early
but the test still proceeds to run, unless another SKIP macro is used
within the test definition, leading to some code repetition. Therefore,
allow tests to be skipped directly from the setup function.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and netfilter.

  Selftests excluded - we have 58 patches and diff of +442/-199, which
  isn't really small but perhaps with the exception of the WiFi locking
  change it's old(ish) bugs.

  We have no known problems with v6.4.

  The selftest changes are rather large as MPTCP folks try to apply
  Greg's guidance that selftest from torvalds/linux should be able to
  run against stable kernels.

  Last thing I should call out is the DCCP/UDP-lite deprecation notices.
  We are fairly sure those are dead, but if we're wrong reverting them
  back in won't be fun.

  Current release - regressions:

   - wifi:
      - cfg80211: fix double lock bug in reg_wdev_chan_valid()
      - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression

  Current release - new code bugs:

   - handshake: remove fput() that causes use-after-free

  Previous releases - regressions:

   - sched: cls_u32: fix reference counter leak leading to overflow

   - sched: cls_api: fix lockup on flushing explicitly created chain

  Previous releases - always broken:

   - nf_tables: integrate pipapo into commit protocol

   - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix
     dangling pointer on failure

   - ping6: fix send to link-local addresses with VRF

   - sched: act_pedit: parse L3 header for L4 offset, the skb may not
     have the offset saved

   - sched: act_ct: fix promotion of offloaded unreplied tuple

   - sched: refuse to destroy an ingress and clsact Qdiscs if there are
     lockless change operations in flight

   - wifi: mac80211: fix handful of bugs in multi-link operation

   - ipvlan: fix bound dev checking for IPv6 l3s mode

   - eth: enetc: correct the indexes of highest and 2nd highest TCs

   - eth: ice: fix XDP memory leak when NIC is brought up and down

  Misc:

   - add deprecation notices for UDP-lite and DCCP

   - selftests: mptcp: skip tests not supported by old kernels

   - sctp: handle invalid error codes without calling BUG()"

* tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  dccp: Print deprecation notice.
  udplite: Print deprecation notice.
  octeon_ep: Add missing check for ioremap
  selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
  net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
  net: tipc: resize nlattr array to correct size
  sfc: fix XDP queues mode with legacy IRQ
  net: macsec: fix double free of percpu stats
  net: lapbether: only support ethernet devices
  MAINTAINERS: add reviewers for SMC Sockets
  s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()
  net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames
  net/sched: cls_api: Fix lockup on flushing explicitly created chain
  ice: Fix ice module unload
  net/handshake: remove fput() that causes use-after-free
  selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step
  net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting
  net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs
  net/sched: act_ct: Fix promotion of offloaded unreplied tuple
  wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
  ...

Merge tag 'loongarch-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some trivial bug fixes for v6.4-rc7"

* tag 'loongarch-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix debugfs_create_dir() error checking
  LoongArch: Avoid uninitialized alignment_mask
  LoongArch: Fix perf event id calculation
  LoongArch: Fix the write_fcsr() macro
  LoongArch: Let pmd_present() return true when splitting pmd

Merge tag 'for-6.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM thinp discard performance regression introduced during this
   merge window where DM core was splitting large discards every 128K
   (max_sectors_kb) rather than every 64M (discard_max_bytes).

 - Extend DM core LOCKFS fix, made during 6.4 merge, to also fix race
   between do_mount and dm's do_suspend (in addition to the earlier
   fix's do_mount race with dm's do_resume).

 - Fix DM thin metadata operations to first check if the thin-pool is in
   "fail_io" mode; otherwise UAF can occur.

 - Fix DM thinp's call to __blkdev_issue_discard to use GFP_NOIO rather
   than GFP_NOWAIT (__blkdev_issue_discard cannot handle NULL return
   from bio_alloc).

* tag 'for-6.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: use op specific max_sectors when splitting abnormal io
  dm thin: fix issue_discard to pass GFP_NOIO to __blkdev_issue_discard
  dm thin metadata: check fail_io before using data_sm
  dm: don't lock fs when the map is NULL during suspend or resume

Pull rdma fixes from Jason Gunthorpe:
 "This is an unusually large bunch of bug fixes for the later rc cycle,
  rxe and mlx5 both dumped a lot of things at once. rxe continues to fix
  itself, and mlx5 is fixing a bunch of "queue counters" related bugs.

  There is one highly notable bug fix regarding the qkey. This small
  security check was missed in the original 2005 implementation and it
  allows some significant issues.

  Summary:

   - Two rtrs bug fixes for error unwind bugs

   - Several rxe bug fixes:
      * Incorrect Rx packet validation
      * Using memory without a refcount
      * Syzkaller found use before initialization
      * Regression fix for missing locking with the tasklet conversion
        from this merge window

   - Have bnxt report the correct link properties to userspace, this was
     a regression in v6.3

   - Several mlx5 bug fixes:
      * Kernel crash triggerable by userspace for the RAW ethernet
        profile
      * Defend against steering refcounting issues created by userspace
      * Incorrect change of QP port affinity parameters in some LAG
        configurations

   - Fix mlx5 Q counters:
      * Do not over allocate Q counters to allow userspace to use the
        full port capacity
      * Kernel crash triggered by eswitch due to mis-use of Q counters
      * Incorrect mlx5_device for Q counters in some LAG configurations

   - Properly implement the IBA spec restricting privileged qkeys to
     root

   - Always an error when reading from a disassociated device's event
     queue

   - isert bug fixes:
      * Avoid a deadlock with the CM handler and CM ID destruction
      * Correct list corruption due to incorrect locking
      * Fix a use after free around connection tear down"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix rxe_cq_post
  IB/isert: Fix incorrect release of isert connection
  IB/isert: Fix possible list corruption in CMA handler
  IB/isert: Fix dead lock in ib_isert
  RDMA/mlx5: Fix affinity assignment
  IB/uverbs: Fix to consider event queue closing also upon non-blocking mode
  RDMA/uverbs: Restrict usage of privileged QKEYs
  RDMA/cma: Always set static rate to 0 for RoCE
  RDMA/mlx5: Fix Q-counters query in LAG mode
  RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters
  RDMA/mlx5: Fix Q-counters per vport allocation
  RDMA/mlx5: Create an indirect flow table for steering anchor
  RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions
  RDMA/rxe: Fix the use-before-initialization error of resp_pkts
  RDMA/bnxt_re: Fix reporting active_{speed,width} attributes
  RDMA/rxe: Fix ref count error in check_rkey()
  RDMA/rxe: Fix packet length checks
  RDMA/rtrs: Fix rxe_dealloc_pd warning
  RDMA/rtrs: Fix the last iu->buf leak in err path

Pull spi fixes from Mark Brown:
 "A few more driver specific fixes.

  The DesignWare fix is for an issue introduced by conversion to the
  chip select accessor functions and is pretty important but the other
  two are less severe"

* tag 'spi-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: dw: Replace incorrect spi_get_chipselect with set
  spi: fsl-dspi: avoid SCK glitches with continuous transfers
  spi: cadence-quadspi: Add missing check for dma_set_mask

Merge tag 'regulator-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "The set of regulators described for the Qualcomm PM8550 just seems to
  have been completely wrong and would likely not have worked at all if
  anything tried to actually configure anything except for enabling and
  disabling at runtime"

* tag 'regulator-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix regulators for PM8550

Pull regmap fix from Mark Brown:
 "Another fix for the maple tree cache, Takashi noticed that unlike
  other caches the maple tree cache didn't check for read only registers
  before trying to sync which would result in spurious syncs for read
  only registers where we don't have a default.

  This was due to the check being open coded in the caches, we now check
  in the shared 'does this register need sync' function so that is fixed
  for this and future caches"

* tag 'regmap-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regcache: Don't sync read-only registers

Pull media fixes from Mauro Carvalho Chehab:
 "A fix for dvb-core to avoid a race condition during DVB board
  registration"

* tag 'media/v6.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"

Pull ext4 fixes from Ted Ts'o:
 "Fix two regressions in ext4, one report by syzkaller[1], and reported
  by multiple users (and tracked by regzbot[2])"

[1] https://syzkaller.appspot.com/bug?extid=4acc7d910e617b360859
[2] https://linux-regtracking.leemhuis.info/regzbot/regression/ZIauBR7YiV3rVAHL@glitch/

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: drop the call to ext4_error() from ext4_get_group_info()
  Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa"

Pull smb client fixes from Steve French:
 "Eight, mostly small, smb3 client fixes:

   - important fix for deferred close oops (race with unmount) found
     with xfstest generic/098 to some servers

   - important reconnect fix

   - fix problem with max_credits mount option

   - two multichannel (interface related) fixes

   - one trivial removal of confusing comment

   - two small debugging improvements (to better spot crediting
     problems)"

* tag '6.4-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add a warning when the in-flight count goes negative
  cifs: fix lease break oops in xfstest generic/098
  cifs: fix max_credits implementation
  cifs: fix sockaddr comparison in iface_cmp
  smb/client: print "Unknown" instead of bogus link speed value
  cifs: print all credit counters in DebugData
  cifs: fix status checks in cifs_tree_connect
  smb: remove obsolete comment

Kuniyuki Iwashima says:

====================
udplite/dccp: Print deprecation notice.

UDP-Lite is assumed to have no users for 7 years, and DCCP is
orphaned for 7 years too.

Let's add deprecation notice and see if anyone responds to it.
====================

Link: https://lore.kernel.org/r/20230614194705.90673-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

DCCP was marked as Orphan in the MAINTAINERS entry 2 years ago in commit
054c4610 ("MAINTAINERS: dccp: move Gerrit Renker to CREDITS").  It says
we haven't heard from the maintainer for five years, so DCCP is not well
maintained for 7 years now.

Recently DCCP only receives updates for bugs, and major distros disable it
by default.

Removing DCCP would allow for better organisation of TCP fields to reduce
the number of cache lines hit in the fast path.

Let's add a deprecation notice when DCCP socket is created and schedule its
removal to 2025.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs
when a UDP-Lite socket tries to allocate a buffer under memory pressure.

Someone should have stumbled on the bug much earlier if UDP-Lite had been
used in a real app.  Also, we do not always need a large UDP-Lite workload
to hit the bug since UDP and UDP-Lite share the same memory accounting
limit.

Removing UDP-Lite would simplify UDP code removing a bunch of conditionals
in fast path.

Let's add a deprecation notice when UDP-Lite socket is created and schedule
its removal to 2025.

Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>